In this technical tip from Phenomenex, the topic of gas chromatography (GC) column trimming is addressed from a troubleshooting perspective. The key question explored is whether trimming a GC column is necessary and how it impacts chromatographic performance.<h3>Why Trim a GC Column?</h3>Column trimming is primarily used to restore chromatographic performance by removing damaged or contaminated sections, typically located at the column inlet.<h5>1. Baseline Bleed, Noise, Ghost Peaks, Poor Peak Shape</h5><ul><li>Cause: Column contamination</li><li>Removing the contaminated stationary phase at the column entrance helps restore performance.</li></ul><h5>2. Elevated Baseline (Especially at High Temperature)</h5><ul><li>Cause: Column bleed</li><li>Degradation of the stationary phase due to oxygen exposure or thermal damage leads to increased baseline.</li></ul><h5>3. Ghost Peaks (Peaks Without Injection)</h5><ul><li>Cause: Residual sample or contamination</li><li>Compounds trapped at the beginning of the column can appear as peaks even when no sample is injected.</li></ul><h5>4. Peak Tailing (Asymmetrical Peaks)</h5><ul><li>Cause: Damaged or contaminated column sections</li><li>These issues result in adsorption effects or poor flow dynamics.</li></ul><h5>5. Retention Time Shifts</h5><ul><li>Cause: Contamination or damage near the inlet</li><li>Although trimming slightly changes retention time, it can correct shifts caused by inlet-side issues.</li></ul><h5>6. Baseline Noise and Spikes</h5><ul><li>Cause: Particulate matter or degraded stationary phase</li><li>These can lead to detector instability and random signal fluctuations.</li></ul><h5>7. Baseline Drift or Wander</h5><ul><li>Cause: Contamination or oxidized column sections</li><li>Removing these regions stabilizes the baseline.</li></ul><h5>8. Loss of Resolution or Sensitivity</h5><ul><li>Cause: General column degradation</li><li>Trimming removes the most exposed and damaged portions, effectively rejuvenating column performance.</li></ul><h3>How to Trim a GC Column</h3>A capillary GC column consists of:<ul><li>Polyimide outer coating (protective layer)</li><li>Fused silica tubing (fragile but flexible core)</li></ul><h3>Step-by-Step Procedure</h3><h5>1. Scoring the Column</h5><ul><li>Use a ceramic wafer</li><li>Hold it at an inclined angle</li><li>Score the polyimide coating perpendicular to the column</li></ul><h5>2. Breaking the Column</h5><ul><li>Perform a quick, decisive flick</li><li>This ensures a clean, square cut</li></ul><h5>3. Inspecting the Cut</h5>After trimming, visually inspect the column end.<h3>Examples of Column Cuts</h3><h4>Good Cut</h4><ul><li>Clean, square end</li><li>Ensures proper sealing and connection</li></ul><h5>Bad Cuts</h5><ul><li>Slight Irregularity<ul><li>Small imperfection at the edge</li><li>Can cause leaks and active sites</li></ul></li><li>Poor / Rough Cuts<ul><li>Uneven or jagged edges</li><li>Lead to:<ul><li>Poor connections</li><li>Active sites</li><li>Peak tailing</li></ul></li></ul></li></ul><h2>Conclusion</h2>Trimming a GC column is a simple yet effective troubleshooting step. By removing contaminated or damaged sections—especially near the inlet—it can resolve a wide range of chromatographic issues, including baseline instability, ghost peaks, and loss of performance.Proper cutting technique is essential to avoid introducing new problems such as leaks or active sites.

Trimming a GC Column: Purpose, Symptoms, and Proper Technique

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 30th March 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, Thermo Fisher Scientific, brochure by Shimadzu and presentation by MDCW / LECO!<h3>1. Agilent Technologies: Extraction and Analysis of Pesticides from Water by Solid Phase Extraction and GC/MS</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_extraction_analysis_pesticides_water_gcms_5994_8996en_agilent_28fc35d0e7.pdf">Full PDF for download</a></li></ul>Drinking water is defined as water intended for human consumption obtained from different sources. Several guidelines/regulations exist for ensuring that undesirable substances such as pesticides are not present in excessive amounts that may be harmful to human health. These regulations ensure that water intended for human consumption can be consumed safely. In India, the Bureau of Indian Standards (BIS) has set regulatory limits for residual pesticides in drinking water (IS 10500)1 , packaged drinking water (IS 14543)2 , and natural mineral water (IS 13428).3 A total of 26 pesticides are regulated by BIS standards, of which four compounds (monocrotophos, phorate, 2,4-D, and isoproturon) are more suitable for analysis by liquid chromatography.&nbsp;EPA Method 525.2 is a general-purpose method for determination of organic compounds in finished drinking water or water from any source or treatment stage.4 This method is applicable to a range of organic compounds that are partitioned from the water sample onto a C18 organic phase packed in a disk or cartridge. The organic compounds are then eluted using a suitable eluent, concentrated, and analyzed by GC/MS.&nbsp;This application note describes the use of EPA Method 525.2 for extraction of pesticide residues at trace levels in water using solid-phase extraction (Agilent Bond Elut C18: Straight barrel cartridges, p/n 12102118) and analysis using Agilent 8890-5977 GC/MS.&nbsp;Excellent linearity with R2 &gt; 0.995 was obtained for all pesticides considered for the study. Recoveries were obtained in the range of 80–120% with associated RSDs &lt; 15% at 0.005–0.080 ng/mL level of fortification.<h4>Experimental</h4><h5>Instrument parameters</h5><ul><li>GC: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=8890">Agilent 8890</a></li><li>Column: Agilent <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=J%26W+HP-5ms">J&amp;W HP-5ms</a> UI 30 m × 0.25 mm, 0.25 μm&nbsp;</li><li>Carrier Gas: Helium, constant flow, 1.2 mL/min&nbsp;</li><li>Inlet: Agilent Multimode Inlet (MMI)</li><li>MS: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=5977">5977 GC/MS</a></li></ul><h4>Conclusion&nbsp;</h4>A simple, easy, and efficient method based on EPA 525.2 was implemented for the determination of 22 pesticides in water. The method demonstrated good sensitivity, precision, and accuracy, and allows for rapid analysis. The results demonstrate that pesticide residues can be detected below the current maximum residue levels (MRL) required by the BIS specifications. Acceptable recoveries and precision were obtained at concentrations as low as 5 ng/L for all pesticides. The method is ideally suited for use in a regulatory laboratory for the determination of pesticides in surface, drinking, and packaged drinking water.<h3>2. MDCW / LECO: Exploring PFAS in Consumer Goods Using GCxGC and High-Resolution Mass Spectrometry</h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_3_Alonso_6f61e3ea43.pdf">Full PDF for download</a></li></ul>Per- and polyfluoroalkyl substances (PFAS) are widely used in consumer and industrial products due to their unique physicochemical properties, but their persistence and potential health risks have made their detection increasingly important. This study focuses on developing an untargeted analytical approach for screening PFAS and related compounds in consumer goods using advanced chromatographic and mass spectrometric techniques.The analytical workflow combines gas chromatography with time-of-flight mass spectrometry (GC-TOFMS) and comprehensive two-dimensional gas chromatography coupled with high-resolution TOFMS (GC×GC-HRTOFMS), using systems such as the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1097">LECO Pegasus® BTX </a>and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/38">Pegasus® HRT+</a> platforms. Sample introduction is performed via thermal desorption or pyrolysis, enabling analysis of both volatile and complex matrices. High-resolution MS provides accurate mass measurements and elemental composition, which are essential for identifying unknown compounds and reducing matrix interferences.In the first case study, anti-fog solutions were analyzed and found to contain a wide range of compounds, including fluorotelomer alcohols and related PFAS species. While GC-TOFMS enabled initial screening, high-resolution TOFMS was necessary to characterize unknown compounds through accurate mass determination and complementary ionization techniques (EI and PCI). This approach allowed tentative structural assignment using external databases, demonstrating the importance of HRMS in identifying compounds not present in standard libraries.The second case study focused on chewing gum, a highly complex matrix with diverse chemical constituents and trace-level analytes. The use of GC×GC-HRTOFMS significantly improved chromatographic separation and spectral clarity, enabling detailed profiling of volatile and semi-volatile compounds. A dedicated PFAS screening workflow based on mass defect analysis and spectral filtering was applied, leveraging the characteristic CF₂ patterns of PFAS molecules to simplify data interpretation.Despite the complexity of the sample, no PFAS were detected in the chewing gum, its packaging, or the box. Overall, the study demonstrates that combining GC×GC separation, high-resolution mass spectrometry, and advanced data processing tools provides a powerful and reliable strategy for untargeted PFAS screening in complex consumer products, particularly when unknown or emerging contaminants are of concern.<h3>3. Shimadzu: Gas Chromatograph Nexis GC-2060</h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/c184_e056_06c3456516.pdf">Full PDF for download</a></li></ul>The Shimadzu <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=3&amp;search=Nexis+GC-2060">Nexis GC-2060</a> represents a new generation of gas chromatographs, built on over 70 years of GC development and designed to serve as a flexible and future-proof analytical platform. It integrates the concept of Analytical Intelligence, which enables automated system monitoring, troubleshooting, and optimization, helping both experienced and less experienced users achieve reliable and consistent results. The system is highly configurable, supporting up to two injectors, three injection units, and four detectors simultaneously, allowing a single instrument to cover multiple analytical applications.A key advantage of the Nexis GC-2060 is its versatility in sample introduction and detection. The Multi-Mode Injection Unit (MMI) supports a wide range of injection techniques, including split/splitless, PTV, direct injection, large-volume injection (LVI), and thermal desorption, significantly reducing the need for complex sample preparation. The system is also equipped with next-generation detectors such as FID and TCD, offering high sensitivity, stability, and linearity, with additional detector options (ECD, FPD, FTD, BID) enabling broad application coverage.The instrument is designed to maximize laboratory efficiency and minimize downtime. Features such as tool-free column installation (ClickTek), automated startup/shutdown, Easy sTop maintenance mode, and Clean Pilot for automated column conditioning simplify routine operation and reduce manual intervention. In addition, Eco Idling technology automatically optimizes gas and power consumption during standby, significantly lowering operational costs while maintaining readiness for analysis.From an analytical performance perspective, the Nexis GC-2060 delivers excellent reproducibility and sensitivity, supported by advanced autosamplers (e.g., AOC-30) and compatibility with third-party systems. The platform supports hydrogen carrier gas for faster analysis and includes smart gas management features such as automatic gas switching. Its modular design allows seamless integration with various sample preparation systems, autosamplers, and detectors, ensuring adaptability to evolving laboratory needs.Overall, the Nexis GC-2060 combines high performance, operational efficiency, and flexibility in a single platform, making it suitable for a wide range of applications, including pharmaceutical analysis, environmental testing, food analysis, and energy-related measurements. Its scalability and continuous software updates ensure long-term usability and alignment with future analytical requirements.<h3>4. Thermo Fisher Scientific: Accurate multi-component blast furnace gas analysis maximizes iron production and minimizes coke consumption</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/epm_AN_Iron_Production_Prima_PRO_bd5de98b44.pdf">Full PDF for download</a></li></ul>Over a billion tonnes of iron a year are produced in blast furnaces, representing around 94% of global iron production¹. The blast furnace consists of a large steel stack, lined with refractory brick. Iron ore, coke and limestone are dropped into the top of the furnace and preheated air blown into the bottom through nozzles called ‘Tuyeres’. Iron oxides are reduced in the melting zone, or ‘Bosh’, forming liquid iron (called ‘hot metal’) and liquid slag. These liquid products are drained from the furnace at regular intervals, and the blast furnace will run continuously for several years, until the refractory lining needs replacing.Analysis of carbon monoxide (CO) and carbon dioxide (CO₂) give vital information on the efficiency of the reduction processes. Historically, two non-dispersive infrared (NDIR) analyzers were used, one to measure CO, the other CO₂. Additional discrete analyzers were required to monitor oxygen and hydrogen – typically paramagnetic O₂ analyzers and thermal conductivity analyzers for H₂.&nbsp;Thermo Scientific™ process mass spectrometers have been widely used for many years for key gas analysis applications in iron and steel plants, including blast furnace, basic oxygen steelmaking, coke oven gas analysis, secondary steel process control, fuel gas analysis and direct reduction iron processes²<h4>Process control requirements&nbsp;</h4>The advantages of process MS over conventional analysis techniques have been proven over many years in the iron and steel industry. The ability to measure a wide range of components on a single analyzer, coupled with advanced calibration, data transmission, and self-diagnostic software, makes the modern mass spectrometer ideal for integration into the modern plant. On blast furnaces, superior gas analysis is being used to calculate gas efficiency, mass and heat balances, and heat profiles through probe analysis, as well as being an essential tool in the early detection of cooling water leaks and sample system failures.&nbsp;Figure 2 shows 64 hours of data from a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2305">Thermo Scientific™ Prima™ PRO Process MS</a> monitoring the six gases in a blast furnace top gas every 10 seconds. The pulse every 12 hours is generated by an automatic nitrogen blowback from the sample conditioning system, to keep the sample probe clear of particulates.<h4>Hydrogen analysis&nbsp;</h4>An increase in the hydrogen level in the furnace can indicate a leak from the furnace cooling system, as water dissociates into hydrogen and oxygen in the furnace. This has implications both for plant efficiency and plant safety. Water leaks will lower the furnace temperature, causing heat loss and a consequent increase in fuel consumption. In extreme cases, damage to plant and personnel can be caused by ignition of these hazardous mixtures of explosive gases.&nbsp;Figure 4 shows a plot of top gas hydrogen concentration measured by Thermo Scientific process MS over a 24-hour period, with the departure of the measured H2 value from that predicted by the mass balance model indicating a water leak. This leak was caused by the failure of a cooling member, and the furnace was taken off blast for repair. The mass spectrometer’s ability to provide fast, accurate hydrogen analysis removes the need for an additional discrete analyzer.&nbsp;Gas composition measurement is particularly important during the end-of-campaign blowdown that takes place prior to rebuilds and relines, because explosive gas mixtures can be generated.&nbsp;<h4>Probe analysis&nbsp;</h4>The fast analysis provided by MS offers another significant advantage over discrete analyzers—a number of process streams can be analyzed using a single instrument. This is achieved using a fully automated multi-inlet system, designed to switch between sample streams at high speeds with minimal sample flushing times. For example, as well as furnace top gas, the MS can also analyze gases from probes placed above and below the burden (the furnace charge of iron ore, coke and limestone). These are known as above-burden and sub-burden probes and provide valuable information on fuel efficiency, iron conversion and furnace charging. Figure 5 shows a schematic of these two probes; they can be moved across the furnace to build a cross-sectional profile of the furnace.<h4>Summary&nbsp;</h4>Thermo Scientific process mass spectrometers have been successfully monitoring blast furnace off gas at many of the world’s iron and steel companies for over 30 years. For a blast furnace producing 5,000 tonnes a day, a reduction in coke consumption of just 10 kg per tonne of iron produced provides a payback of over $10,000 a day. Users report that the combination of fast, accurate MS gas analysis for gas efficiency, heat and mass balances and hydrogen analysis, with advanced process control and mathematical modeling, has reduced coke consumption by up to 100 kg per tonne and increased iron production. Upgrading to Prima PRO MS can therefore result in complete installation payback within a few weeks.&nbsp;<ul><li>Reduces coke consumption&nbsp;</li><li>Produces consistent quality iron&nbsp;</li><li>Reduces downstream processing costs&nbsp;</li><li>Detects water leaks fast&nbsp;</li><li>Improves thermal control of furnace&nbsp;</li><li>Enables safer operation during blowdown</li></ul>

News from LabRulezGCMS Library - Week 14, 2026

<h3>We're excited to announce that <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999">Clarity Chromatography Software</a> version 10.1.2 is now available!</h3>This minor update expands Clarity’s portfolio with new control modules.<h4>Newly added Instrument control modules</h4><ul><li>Ecom auxiliary modules</li><li>HTA ICF control modules</li><li>Spark pump</li></ul><h4>Updated Instrument control modules</h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/168">Ecom</a> HPLC</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/328">Knauer</a> HPLC</li><li>Spark ICF control modules</li><li>YoungIn Chromass HPLC</li></ul><blockquote>For a complete list of module changes, see the <a target="_blank" rel="noopener noreferrer" href="https://www.dataapex.com/version_history?product=1">Changelog</a>. For more info about exciting new features directly in Clarity, explore what was introduced in the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/article/5622">Clarity 10.1 release highlights</a>.Clarity can control 1000+ instruments; the <a target="_blank" rel="noopener noreferrer" href="https://www.dataapex.com/controls">list can be previewed here</a>.</blockquote><h4>Supported Instruments in Clarity (DataApex) — Quick Guide</h4>Clarity Chromatography Software supports a wide range of chromatographs and peripherals via digital control (DD) and analog acquisition (A/D) using the Colibrick module.<h5>Gas Chromatographs (GC)</h5>Digital integration over LAN/RS232 (many via ICF):<ul><li>Agilent: 5890, 6890, 7890, 8860, 8890, Intuvo 9000</li><li>Shimadzu: GC-2010/2014, Nexis GC-2030</li><li>Thermo Fisher: TRACE 1300/1310</li><li>PerkinElmer: Clarus 400–690</li><li>Also supported: Dani, Ellutia, Young In Chromass, Apix, Fuli, GOW-MAC (selected models)</li></ul><blockquote>Note: Most Agilent 6890–8890 and Intuvo use LAN – ICF.</blockquote><h5>HPLC Systems</h5>Full system/module control:<ul><li>Agilent 1100–1290 Infinity II (ICF)</li><li>Shimadzu LC-10/20 and Nexera LC-40</li><li>PerkinElmer Flexar / NexSAR</li><li>Knauer Azura / BlueShadow / Smartline</li><li>Hitachi Chromaster / Primaide</li><li>Young In Chromass ChroZen series</li><li>Sykam S500–S600, Watrex Streamline, Hanon LC7000–7300</li></ul><h5>HPLC Modules (Pumps, Detectors, Ovens, Fraction Collectors)</h5><ul><li>Pumps: Agilent 1100–1290 families, Knauer, Shimadzu, PerkinElmer, Sykam, SSI, Ecom</li><li>Detectors: VWD/DAD(PDA)/RID/FLD/ELSD across Agilent, Shimadzu, Knauer, PerkinElmer, Young In Chromass, Ecom, etc.</li><li>Column Ovens: Agilent G1316x / G7116x, Shimadzu CTO-20/30/40, Knauer CT2.1, PerkinElmer Flexar</li><li>Fraction Collectors: Knauer FC 6.1, Teledyne FOXY series, Ecom ECF 2096, Waters Fraction Collector II</li></ul><h5>Autosamplers</h5><ul><li>Agilent GC ALS (7673/7683/7693/8697), HPLC ALS modules (G1313A–G7167C)</li><li>Shimadzu AOC-20 / AOC-5000+, SIL-10 / SIL-20 / SIL-40 series</li><li>CTC Analytics PAL, HTA autosamplers, Spark Alias/UHPLC, Knauer AS 6.1L</li><li>PerkinElmer Flexar / NexSAR AS</li></ul><h5>Other Devices</h5><ul><li>GC×GC modulators (e.g., Charles University GC×GC Modulator)</li><li>Valves &amp; switch modules (Agilent, Knauer, Shimadzu, VICI-Valco)</li><li>Degassers, flow monitors, managers, interfaces</li><li>LC-MS / GC-MS: Advion Expression CMS, Microsaic 4500 MiD, Markes BenchTOF (and others)</li><li>Balances (EA extension): Mettler Toledo, Sartorius</li></ul><h5>Analog Acquisition (Colibrick)</h5>A/D support for legacy or analog-output devices:<ul><li>GC: Agilent 5880/4890A, Varian 3xxx/3800/3900, PerkinElmer Clarus series, Thermo TRACE, Shimadzu GC-14/9A, Scion 43x/45x/83xx/85xx, etc.</li><li>HPLC Detectors: Waters 2487/2489, ESA Corona, Hitachi L-series, JASCO FP/UV, Ecom LCD series, many others</li><li>Elemental &amp; Amino Acid Analyzers: Carlo Erba/Costech ECS, Biochrom 20/30+</li></ul>If you are interested in a DEMO VERSION, contact us!

DataApex Clarity Chromatography software 10.1.2 just released!

Article

Product

Application

Academy

Presentation

Software

Video

Since 1991 DataApex develops and manufactures chromatography data stations. DataApex is constantly striving to provide users with efficient and up-to-date tools for chromatography data processing.

DataApex

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

Bruker

In this webinar, participants will gain valuable insights intro Bruker’s innovation solutions tailored for the Pharmaceutical Industry. The session will commence with an introduction to Bruker, highlighting the company’s expertise and commitment to deliver cutting-edge solutions for Pharma. The webinar will then delve into FT-IR products, elucidating their applications and benefits within the pharmaceutical sector. Furthermore, attendees will explore the use of handheld Raman product, understanding how the portable device is capable to offer rapid and reliable results.&nbsp;The webinar will also shed light on FT-NIR technology, especially its role in ensuring content uniformity and facilitating Process Analytical Control (PAT) in pharmaceutical manufacturing. Lastly, the session will emphasize the compliance of Bruker products with the stringent requirements of the Pharmaceutical Industry, showcasing their adherence to quality standards and regulations.In this Webinar You Will Learn:<ul><li>FT-IR Spectroscopy for Pharma Industry</li><li>Handheld Raman Spectroscopy for QC</li><li>FT-NIR for Content Uniformity and Process Analytical Control (PAT)</li><li>Compliance to Pharma Regulations</li><li>Q&amp;A</li></ul><blockquote>Presenter: Mr. Mario EckPresenter: Dr. Felix FrommPresenter: Dr. Mui Saranwong</blockquote>

Bruker: Mastering Quality Control: The Power of FT-IR/NIR and Raman Spectroscopy for Pharmacopeia Compliance.

Mastering Quality Control: The Power of FT-IR/NIR and Raman Spectroscopy for Pharmacopeia Compliance.

In this webinar, participants will gain valuable insights intro Bruker’s innovation solutions tailored for the Pharmaceutical Industry. 

FT-IR/NIR and Raman Spectroscopy for Pharmacopeia Compliance

As we all know, the need for efficient and sustainable energy storage solutions has never been greater. With the increasing demand for electric vehicles, and storage of renewable energy, the battery industry together with academic institutes are constantly evolving and pushing the boundaries of what is possible.Bruker is at the forefront of this innovation, providing cutting-edge technologies and solutions for battery research and manufacturing. In this webinar, we will explore the latest developments in Bruker's technology and how they can be applied to optimize battery performance, reduce costs, and accelerate the path towards a cleaner energy future.Join our 75 minutes experts discussion as they dive into the fascinating world of batteries and discover how Bruker is shaping the future of it.Key Learning Topics:<ul><li>You will learn about a complete portfolio of technologies applied to battery research and production, including AFM, NMR, EPR, MS, FTIR, XRD, XRF, XRM, RAMAN, EDS and EBSD. These technologies represent the excellence of Bruker's analytical tools and are complementary in their applications. They are used in various ways to help researchers and manufacturers understand how batteries work, how they can be improved, and how they can be produced and recycled more efficiently.</li></ul>Who Should Attend?<ul><li>Battery manufacturers</li><li>Research and development organizations</li><li>Academic institutions</li><li>Material science organizations</li><li>Electrochemical and analytical chemistry organizations</li><li>Testing laboratories involved in battery research and development.</li><li>Government agencies involved in renewable energy and sustainability.</li><li>Investors interested in the battery market.</li><li>Battery technology experts and engineers</li></ul><blockquote>Presenter: Andrea Steck Ph.D. (Principal Scientist - Bruker BioSpin (Ettlingen, Germany))Andrea Steck joined BBIO Germany in 2010 to perform contract services, then stepped into food profiling development, acted as Quality Manager (ISO-17025), and now is responsible for supporting, developing, and driving AIC-DEV projects as Principal Scientist.Andrea holds a PhD in Chemistry (TU Munich). She gained extensive experience in NMR pulse sequence development and structure elucidation (Berne, Switzerland), and in leading an analytical (NMR/MS/IR) laboratory in big pharmaceutical industry (Vienna, Austria). She then joined Bruker Austria as Manager Pursuant to Trade Law, responsible for contract services and customer acquisition.Presenter: Hugues Guérault (Application Manager – Bruker Advanced X-Ray Solutions (Karlsruhe, Germany))Hugues Guérault joined Bruker in 2002 as Application Scientist. He is now leading Bruker AXS application team and manages worldwide the activities of the application laboratories for equipment demonstrations and customer training.Hugues holds a PhD in Material Science from Le Mans University (France) and made a post-doc at the University of Leuven (Belgium). Overall, he has acquired more than 25 years of experience in material characterization using X-ray diffraction.Presenter: Peter De Wolf, PhD (Sr. Director AFM Technology Development &amp; Applications, Bruker Nano Surfaces &amp; Metrology, Santa Barbara, CA, USA)Joined Bruker after obtaining Ph.D. in Electrical Engineering from the University Leuven &amp; IMEC, Belgium in 1998 focused on the development of novel AFM characterization methods. Author and co-author of over 40 publications related to property characterization using AFM, and co-inventor of several AFM methods. In his role, Peter is responsible for developing, driving, and leveraging new technology and applications for Bruker’s AFM Instrumentation.Presenter: Ph.D. Bob Galvin, FRSC (Vice President BAMS, Bruker Daltonics, London, UK)Bob Galvin obtained his PhD using mass spectrometry to investigate novel catalytic reactions and since then has always been involved in this technology. &nbsp;He joined Bruker eleven years ago and has held a number of executive positions during this period.Presenter: Rebecca Keller (Scientific Content Creator – Bruker Scientific LLC (Billerica, MA, USA))Rebecca joined Bruker Scientific in 2022 to support scientific content creation for applied markets as well as research and academia. Thanks to her extensive experience in crafting content for chemistry e-learning platforms, she excels at presenting complex ideas with exceptional clarity and precision.Rebecca graduated in Chemistry at the University of Oregon in 2019 and has since sought to improve scientific communication by producing content across multiple platforms.Presenter: Michele Gironda (Head of Global Segment Management – Bruker Nano Analytics (Berlin, Germany))Michele Gironda joined Bruker in 2017 when Bruker acquired XGLab where he was Director Sales and Marketing. He is now our Head of Global Market Segment Management in the Nano Analytics Division. In his role Michele manages worldwide activities for the key strategic market segments in cooperation with sales, marketing, application and product managers.Michele holds a Master Degree in Engineering obtained with his studies in Politecnico di Milano (Italy) and Universitat Politecnica de la Catalunya in Barcelona (Spain).</blockquote>

Bruker: Shaping the future of batteries: Bruker technologies across the entire value chain

Shaping the future of batteries: Bruker technologies across the entire value chain

Join our 75 minutes experts discussion as they dive into the fascinating world of batteries and discover how Bruker is shaping the future of it.

Bruker technologies - Shaping future of batteries

FT-IR spectroscopy is an easy-to-use and nondestructive analysis tool for chemical identification, quantification, composition analysis, optical characterization and many more. Depending on measurement geometry (beside transmission measurement) and optical properties of sample materials FT-IR can be very surface sensitive. It provides plenty of surface analysis techniques with different penetration depth to qualitatively or quantitatively characterize the upper layer of a sample, to follow surface reactions or to observe surface emissions etc. Depending on sample form, e.g. powder, gel, liquid, crystal blocks, coatings, micro sized samples or else, different FT-IR techniques can be applied.In this Webinar You Will Learn:<ul><li>Attenuated Total Reflection - ATR</li><li>Diffuse Reflectance Infrared Fourier Transform Spectroscopy - DRIFT</li><li>Specular Reflectance</li><li>InfraRed Reflection Absorption Spectroscopy - IRRAS</li><li>Emission Spectroscopy</li><li>Photo Acoustic Spectroscopy - PAS</li></ul>Who Should Attend?<ul><li>Surface analysis experts (e.g. material science, polymers, automotive…)</li><li>Spectroscopy experts (e.g. academia, physicists, chemists…)</li><li>Microscopy experts (e.g. research, pharmaceuticals, electronics… )</li></ul><blockquote>Presenter: Dr. Xia StammerDr. Xia Stammer studied Physical Chemistry and focused on surface functionalization and characterization during her PhD and research activities. She has been FT-IR application specialist since almost 10 years at Bruker and is specialized for FT-IR research solutions for catalysis, material science and surface analysis.Presenter:&nbsp;Dr. Inga Köhler&nbsp;Dr. Inga Köhler studied Geology and Paleontology and acquired her PhD with focus on Early Earth. Inga has a strong interest in communicating scientific topics to the public and continues to contribute to Archean research. At Bruker, she works as a Scientific Content Creator for FT-IR and Raman spectroscopy as well as microscopy.</blockquote>

Bruker: Shed Light on Surface | How to use FT-IR to characterize surfaces  

Shed Light on Surface | How to use FT-IR to characterize surfaces

In this webinar, you will learn about various FT-IR techniques for surface characterization.

How to use FT-IR to characterize surfaces  

In this webinar we will show you:<ul><li>Why FT-IR is the method of choice for particle-driven analysis of microplastics.</li><li>Demands and requirements to establish a microplastic lab based on FT-IR technology.</li><li>Necessary steps in sample preparation from various sources.</li><li>Theoretical basics to understand the idea behind FT-IR analysis of microparticles.</li><li>That there are comprehensive, complete solutions to microplastic analysis, right out of the box.</li></ul>You will learn about:<ul><li>Instrumental setup and experimentals</li><li>Particle analysis and evaluation</li><li>Microplastic software solutions</li></ul>We will cover the basics of:<ul><li>Different microplastics analysis techniques</li><li>Sample types</li><li>Sample preparation steps</li><li>FT-IR experimental procedures</li><li>FT-IR instrumentation</li></ul>Who should attend:<ul><li>Analytical service laboratories</li><li>Environmental researchers</li><li>Food &amp; Feed producers</li><li>Drinks &amp; Beverages producers</li></ul>FT-IR and Raman are very versatile analytical techniques - but did you know that Bruker offers by far the most comprehensive product range for spectroscopy? Our instruments cover all applications from routine incoming inspection, to multispectral fundamental research at the highest level, to solutions for in-process monitoring.If you are looking for new and innovative solutions to your analytical problems, we welcome you to join our free webinars on spectroscopic measurement techniques, perhaps making your daily work easier.Your Bruker Optics Team

Bruker: Why FT-IR FPA Imaging is King in Microplastics Analysis?

Why FT-IR FPA Imaging is King in Microplastics Analysis?

In this webinar we will show you why FT-IR is the method of choice for particle-driven analysis of microplastics.

We collected real-life applications of particle analysis in pharmaceutical manufacturing and quality control and present them in this brief 20 minute webinar.Learn about the differences of FT-IR and Raman microscopy in particle analysis and which technique is the best for a specific scenario.

Bruker: Root Cause, Particle and Failure Analysis in Pharmaceutical Industries

Root Cause, Particle and Failure Analysis in Pharmaceutical Industries

Learn about the differences of FT-IR and Raman microscopy in particle analysis and which technique is the best for a specific scenario.

Particle Analysis in Pharmaceutical Industries

Biogen is among the first biopharmaceutical companies to employ PAT in an active role in the manufacturing of biologicals. The implementation of in-process Raman for glucose control, biocapacitance for in-line cell growth monitoring as well as in-line refractive index and other univariate techniques for the automatic in-line release of process solutions is being discussed. GMP-specific considerations such as risk assessment, data integrity and qualification strategy are presented as well.The application of PAT in an active role as part of the control strategy in commercial production in a cGMP compliant environment is not yet done very frequently in the biopharmaceutical industry. This is due to a combination of risk factors which typically involve regulatory challenges, technology maturity and economic benefit. Biogen decided to employ PAT at large scale mammalian cell culture at its new manufacturing site at Solothurn, Switzerland. Biogen’s Aducanumab process has shown to benefit significantly from direct PAT control. Inline Raman spectroscopy and inline biocapacitance are used to actively control the feed of glucose and nutrients to the production bioreactor. The glucose concentration is predicted using a validated PLS model and is used as input for a closed loop control device that is controlling the addition of glucose solution to the bioreactor in a virtually continuous manner.<blockquote>Presenter: Oliver Steinhof (Global Lead PAT, Biogen)Supporting the Digital Development and Analytics team at Biogen since 2017 with a focus on PAT implementation and commercialization. Focus over the last 4 years was the startup of Biogen’s Next Generation Manufacturing facility at Solothurn Switzerland. Since 2015 at Lonza Visp, Switzerland, leading the PAT laboratory and providing PAT consulting and solutions to the global Lonza network, including small molecule API manufacture and chemicals. Since 2009 several roles at Shell Global Solutions in Hamburg Germany around lubricants R&amp;D, including management of the analytical services team, global technical support manager, internal consultant, quality auditor and project leader for R&amp;D projects. Chemist by training, spending time at the Universities of Braunschweig Germany, Salt Lake City Utah and Tuscaloosa Alabama. PhD in industrial chemistry sponsored by BASF SE with a focus on on-line NMR spectroscopy and reaction engineering of complex polycondensations.Presenter: Martin Gadsby (Owner and Director, Optimal Industrial Automation)Martin graduated from the University of Bath in the late 1970’s, and after working through a few positions in industry, he became the European R&amp;D Process and Process Automation Group Leader for Kraft Foods. &nbsp;After a few years at Kraft, Martin decided to set up a process automation business with a colleague, Dave Richards, and Optimal was born. Optimal Industrial Automation was formed over 33 years ago, with Martin now being the Vice President of Optimal Industrial Technologies which was formed more recently as the products division and is the market leader in the field of Process Analytical Technology (PAT) with its PAT Knowledge Management product – synTQ. &nbsp;Martin is intimately involved with progressing the evolution of synTQ and advising the Optimal development team on what he believes to be the optimum development direction. &nbsp;Over the last few years, he has taken on the overall responsibility not only for the company but also for the sales and marketing of synTQ whilst remaining very active in ensuring that the development of synTQ continues unabated. &nbsp;On the personal front, Martin is a bit of a ‘petrol head’ and enjoys flying aerobatics and racing cars.</blockquote>

Bruker: Next Generation Manufacturing at Biogen – PAT as an Enabler for Enhanced Process

Next Generation Manufacturing at Biogen – PAT as an Enabler for Enhanced Process

In this webinar, the implementation of in-process Raman for glucose control is being discussed.

Biogen – PAT as an Enabler for Enhanced Process

The polymer industry is one of the world’s largest industrial sectors. &nbsp;Almost all consumer products are composed of polymers of some sort. &nbsp;These products range across items like automobiles, pharmaceuticals, toys, packaging, computer and cell phones, and so on. &nbsp;There are a few areas where characterizing these polymer-based objects can be important: first is performing a quick polymer identification for recycling purposes; second is quality control to identify product defects or failures; and third is reverse engineering to facilitate product development in a highly competitive marketplace. &nbsp;Vibrational spectroscopy (infrared (IR) and Raman) is especially useful for the analysis of polymers in an industrial setting. &nbsp;IR and Raman are highly specific and sensitive tools that are non-destructive and easy to use. &nbsp;Examples will be presented demonstrating the effectiveness of IR and Raman analysis in each of these categories.Mass Spectrometry (MS) has become an indispensable tool for polymer analysis and has been widely used to study polymer structure and composition, end-groups and additives, molecular weight distribution, and so on. &nbsp;MS analysis is extremally sensitive, allowing the detection and identification of minor polymer components and synthesis by-products, as well as low-level impurities and products of decomposition. &nbsp;Matrix Assisted Laser Desorption Ionization (MALDI) allows to perform rapid MS analysis without lengthy pre-separation and with minimal sample preparation. &nbsp;MALDI MS can provide structural and copolymer composition information, as well as be used for imaging of polymer surfaces, characterization of complex polymer mixtures and many other analytical tasks. &nbsp;In this webinar, we will discuss several MS analytical techniques and their applications for polymer analysis using real life examples from the industry and academia.<blockquote>Presenter: Dr. Tom Tague (Applications Manager and Chair of the Safety Committee Bruker Corporation)Dr. Tom Tague is the Applications Manager (FTIR and Raman products) and Chair of the Safety Committee for Bruker Corporation. He is also a member of the Visiting Advisory Committee of the Metropolitan Museum of Art in New York and the Advisory Board of Amplified Sciences. Dr. Tague received his Ph.D. from the University of Utah in Physical Chemistry and his B.S. in Chemistry, from the University of Texas at San Antonio. He conducted his postdoctoral research at the University of Virginia working with professor Lester Andrews. He is a member of the American Chemical Society, the Society for Applied Spectroscopy, the American Physical Society, and the Optical Society of America. Dr. Tague is active in developing new methods and instrumentation with the goal of improving the sensitivity and detection limits of spectroscopy related applications. Dr. Tague has more than 80 publications and 5 patents.Presenter:&nbsp;Dr. Artem FilipenkoDr. Artem Filipenko has over 15 years of industry experience in development of innovative methods and instrumentation for various analytical applications, including food, environmental, industrial, and homeland security. His area of professional expertise ranges from Ion Mobility, Mass Spectrometry, and Gamma Spectroscopy to molecular and nuclear physics. Artem holds a doctorate degree in molecular physics and master’s degree in microelectronics from the National Nuclear Research University in Moscow, as well as master’s degree in business administration from Babson College in Boston.</blockquote>

Bruker: Effectively Analyzing Polymers Using IR, Raman Spectroscopy and MALDI-TOF Mass Spectrometry

Effectively Analyzing Polymers Using IR, Raman Spectroscopy and MALDI-TOF Mass Spectrometry

In this webinar, we will discuss several MS analytical techniques, IR and Raman and their applications for polymer analysis 

Analyzing Polymers by IR, Raman Spectroscopy and MALDI-TOF

FT-IR is a commonly employed technique in the lab due to the vast array of analytical opportunities it offers. However, carrying out FT-IR spectroscopy is not the most intuitive process using current technology.With the release of LUMOS II, Bruker extends the scope of FT-IR microscopy and imaging for applications and increases its accessibility for all users. It is a faster, smarter imaging solution designed for daily use in routine and research laboratories, regardless of user skill level.Bruker’s specialist for FT-IR and Raman microscopy, Dr. Thomas Tague, will present its key hardware and software features and discuss the benefits of automation and focal-plane array imaging. The application of these novel capabilities to the polymer, pharmaceutical, and material science industries will also be shown.What This Webinar Covers:<ul><li>LUMOS II and its software OPUS</li><li>Technical features and workflow</li><li>FT-IR microscopy and imaging</li><li>Focal-plane array detectors</li><li>Applications of µ-FT-IR</li></ul>It Is Intended for Analytical Professionals in:<ul><li>QA/QC</li><li>Production</li><li>Manufacturing</li><li>Operations</li><li>Research &amp; Development</li></ul>With the Job Roles of:<ul><li>Lab Manager</li><li>QC Manager</li><li>Analytical Scientist</li><li>Researcher</li></ul>

FT-IR Imaging Webinar | LUMOS II

In this webinar, Bruker introduce LUMOS II which extends the scope of FT-IR microscopy and imaging 

FT-IR Imaging Webinar - LUMOS II

Vibrational microscopy is an established technique for materials identification and characterization which finds extensive applications in various fields including but not limited to pharmaceuticals, polymers, forensics, cultural heritage, life science, mineralogy, materials science and more.<blockquote>Presenter: Dr. Sergey Shilov (North America Product Manager, Science Business Unit, Bruker Optics)Dr. Sergey V. Shilov is a Product Manager for North America at Bruker Optics. Sergey joined Bruker in 2001. He is responsible for the support and development of new applications for the Bruker research FTIR systems. He received his Ph.D. in 1992 from the Russian Academy of Sciences in Polymer Physics and his M.S. from St. Petersburg State University (Russia) in Physics in 1986. Alexander Von Humboldt Foundation (Germany) awarded him a research fellowship in 1996. Sergey published 37 papers in peer-reviewed journals. His research interests include time-resolved FTIR spectroscopy, surface science, polymer, and life-science applications.&nbsp;</blockquote>

Bruker: State-of-the-Art Microanalysis Using Infrared and Raman Microscopy

State-of-the-Art Microanalysis Using Infrared and Raman Microscopy

In this webinar, participants will learn about the state-of-the art microanalysis using IR and Raman Microscopy.

State-of-the-Art Microanalysis Using IR and Raman Microscopy

&nbsp;<blockquote>Presenter: Dr. Tom Tague (Applications Manager and Chair of the Safety Committee Bruker Corporation)Dr. Tom Tague is the Applications Manager (FTIR and Raman products) and Chair of the Safety Committee for Bruker Corporation. He is also a member of the Visiting Advisory Committee of the Metropolitan Museum of Art in New York and the Advisory Board of Amplified Sciences. Dr. Tague received his Ph.D. from the University of Utah in Physical Chemistry and his B.S. in Chemistry, from the University of Texas at San Antonio. He conducted his postdoctoral research at the University of Virginia working with professor Lester Andrews. He is a member of the American Chemical Society, the Society for Applied Spectroscopy, the American Physical Society, and the Optical Society of America. Dr. Tague is active in developing new methods and instrumentation with the goal of improving the sensitivity and detection limits of spectroscopy related applications. Dr. Tague has more than 80 publications and 5 patents.</blockquote>

Bruker: Infrared and Raman Analysis of Geological Samples

Infrared and Raman Analysis of Geological Samples

In this webinar, you will learn about using Infrared and Raman in analysis of geological samples.