Researchers&nbsp;Tereza Nešporová and Jaroslava Večerková from Brno's RECETOX explain why failures are also a valuable part of gaining knowledge, how they study the effects of chemical substances on the hormonal system, and why they apply their professional insights to their everyday lives.<h5>How did you get involved in research at RECETOX?&nbsp;</h5>Jaroslava: I actually joined RECETOX by chance during my follow-up Master's studies in Environmental Chemistry, back when Professor Holoubek was still leading the institute. I wrote my thesis under Klára Hilscherová and simply stayed here ever since, except for a break during maternity leave. I have been part of her team the whole time, focusing on endocrine disruptors.&nbsp;What has changed over the years is the focus of our research. We used to study surface waters, particularly the presence of substances with endocrine-disrupting potential and their effects on organisms. Today, the research has shifted more toward humans and the interactions between chemical substances and the endocrine system.&nbsp;Tereza: I came from a completely different field. I studied molecular biology and worked on chronic lymphocytic leukemia for my Master's thesis at CEITEC. I used genetic engineering methods such as CRISPR/Cas9 for gene editing—activating, suppressing, or completely removing genes.&nbsp;At the time, Klára Hilscherová’s group needed to create cellular models with increased production of deiodinase enzymes, which I still work on today. I had heard only positive things about the team, and when I finished my Master's degree, I wanted to move beyond my original field. The connection between hormones and neurodevelopment attracted me, and RECETOX became the obvious choice.&nbsp;<h5>So you are in the same research team. How do you collaborate?&nbsp;</h5>Tereza: We sit in the same office. And that’s probably the main thing (laughs).&nbsp;Jaroslava: We discuss things a lot. Some mechanisms repeat across experiments, so we talk about how each of us evaluates data and why. We inspire each other, even though we do not directly collaborate on the same laboratory work.&nbsp;<h5>How does your work differ?&nbsp;</h5>Tereza: Our team is highly interconnected. We all work on developing assays for detecting endocrine-disrupting substances, specifically those affecting thyroid hormones. However, each of us focuses on a different part of the system.&nbsp;I focus on deiodinase enzymes, which regulate the activation and deactivation of hormones. Recently, I have been spending more time analyzing data and designing experiments than working directly in the laboratory.&nbsp;Jaroslava: Within the team, I mainly participate in testing different types of samples—from individual chemicals and mixtures to real environmental samples such as household dust—using the assays mentioned above.&nbsp;It is important to note that chemicals can affect the hormonal system at different levels. They can bind to or block nuclear receptors, affect hormone transport in the bloodstream, or interfere with hormone metabolism. In the past, only one part of this process was monitored. Today, we aim to cover the full spectrum of these interactions.&nbsp;Tereza: And that is crucial. A substance may appear negative in one test, yet affect another part of the system, producing a significant impact on the organism. That is why current research focuses on the entire range of possible mechanisms.&nbsp;<h5>Why did you choose endocrine disruptors as your research topic?&nbsp;</h5>Jaroslava: For me, it was more or less a coincidence while choosing my thesis topic. But it turned out to be a fascinating area, so I stayed with it.&nbsp;Tereza: I had been interested in it for a long time. I also like that our work has a concrete outcome—we develop tests that can realistically be used in decision-making regarding the safety of chemical substances. Compared to my previous research, I feel this work has a much more direct application.&nbsp;<h5>What about your PhD studies?&nbsp;</h5>Jaroslava: My PhD studies are currently on hold. After maternity leave, I returned as a laboratory technician, and my project work gradually shifted away from my original doctoral topic.&nbsp;Tereza: I am currently in the fourth year of my PhD studies. I also completed a research stay in Germany, where I learned to work with neuronal cells.&nbsp;As part of my studies, I focus mainly on deiodinases—the enzymes that act as the “on and off switches” of thyroid hormones. We are developing a test that can measure the effects of chemical substances on their activity.&nbsp;In addition, we are now studying how these substances affect neurons and their development, because proper thyroid hormone levels are crucial for nervous system development.&nbsp;<h5>What is the most challenging aspect of laboratory work?&nbsp;</h5>Tereza: Probably unpredictability. Cells do not always grow as expected, instruments have their bad days, and human error also plays a role. The important thing is to document all mistakes and complications and learn from them.&nbsp;Jaroslava: I agree with Tereza. The biggest challenge is unpredictability. Cells are living systems and do not always behave the same way.&nbsp;<h5>Can a career in science be combined with parenthood?&nbsp;</h5>Jaroslava: At RECETOX, definitely. There is a great deal of flexibility, and managers are very supportive. When necessary, it is possible to work from home. We help each other a lot within the team.&nbsp;Tereza: It also depends on the type of work and whether it can be planned according to your needs. Our team collaborates closely and tries to help one another whenever necessary. That is key. And when needed, data analysis and manuscript writing can also be done from home.&nbsp;<h5>Is your work more routine or highly varied?&nbsp;</h5>Jaroslava: Very varied. Laboratory work alternates with computer-based work. We are constantly learning new things. It is definitely not repetitive or boring, and that is what I enjoy about it.&nbsp;Tereza: The only routine in my work is taking care of cell cultures. Otherwise, the work is constantly changing. That is also what I enjoy most about it.&nbsp;<h5>What are the biggest challenges in your work?&nbsp;</h5>Jaroslava: Data evaluation. Measuring something is one thing; evaluating and interpreting it correctly is another.&nbsp;Tereza: Implementing new methods. And also those moments when you do everything correctly according to a published protocol, yet the results still do not match expectations.&nbsp;In science, you have to learn to accept that not everything works the first time. The important thing is not to give up, to continue optimizing, and to keep hoping for success.&nbsp;<h5>What role should open science play?&nbsp;</h5>Tereza: A huge one. If we had access to detailed protocols and original datasets, it would save enormous amounts of time and money during the implementation and optimization of new methods. Scientific papers often omit details that are actually critical for experimental success.&nbsp;Jaroslava: It is also important to share failures. A negative result is still a result, and it can provide valuable information.&nbsp;<h5>You are both mothers. Does your work influence your personal lives?&nbsp;</h5>Jaroslava: Absolutely. For example, we pay close attention to washing fruit because of chemical treatments. I encourage my children to think about what they consume, what it contains, and where it comes from. We try to avoid plastics and consistently separate waste.&nbsp;Tereza: Definitely. Even before having a child, I paid close attention to the composition of cosmetics, food, and other products. After becoming a parent, my caution multiplied.&nbsp;I was especially careful during pregnancy because a developing organism is most sensitive to harmful substances. Sometimes relatives raise their eyebrows at this, but when we have information firsthand, we cannot simply ignore it.&nbsp;Jaroslava: We also pay attention to toys, clothing, and materials used in the home. It is a kind of professional deformation (laughs).&nbsp;<h5>How can your research contribute from a broader perspective? How can others build upon it?&nbsp;</h5>Jaroslava: We are gradually optimizing methods that may eventually be used routinely. That is probably our greatest contribution.&nbsp;Tereza: Yes, our methods could help identify undesirable effects of substances before they reach the market, potentially leading to regulation of their production.&nbsp;<h5>Would you like to continue working on this topic in the future?&nbsp;</h5>Jaroslava Večerková: The topic of endocrine disruption is extremely interesting and very broad. The direction of research may change depending on current projects, but I would like to remain part of the team.&nbsp;Tereza Nešporová: I am very interested in uncovering how substances affect human health, and I believe I will want to continue working in this area. I like how dynamic the research is and that it has direct practical applications. I do not mind change, but I am happy within this team and would like to stay. We work together as a well-coordinated group.&nbsp;

Researchers Tereza Nešporová and Jaroslava Večerková: In science, we must learn to work with failure

Wiley, a global leader in authoritative content and research intelligence for the advancement of scientific discovery, innovation, and learning, today announced the release of the multi-format <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2461">NIST / EPA / NIH EI Mass Spectral Library 2026 </a>and <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2462">NIST MS/MS Spectral Library 2026</a>.Developed by the experienced mass spectrometry (MS) team at the National Institute of Standards and Technology (NIST), these databases represent the culmination of more than four decades of comprehensive evaluation and expansion, making it an essential resource for those analyzing mass spectra.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Wiley_NIST_EPA_NIH_EI_Mass_Spectral_Library_2026_af64f091bd.jpg" alt="Wiley: NIST / EPA / NIH EI Mass Spectral Library 2026" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Wiley_NIST_EPA_NIH_EI_Mass_Spectral_Library_2026_af64f091bd.jpg 111w," sizes="100vw" width="1531" height="2159"><h4>New in the 2026 release:</h4><ul><li>The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2461">NIST/NIH/EPA EI Mass Spectral Library</a> includes 35,000+ new compounds, bringing the total to 431,000+ EI (electron ionization) spectra, with expanded coverage of biologically, environmentally, and industrially relevant compounds.</li><li>The <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/2462">NIST MS/MS Mass Spectral Library</a> now contains 3.2 million+ spectra across 68,600+ compounds, spanning metabolites, drugs, pesticides, peptides, lipids, glycans, extractable and leachable compounds, surfactants, and contaminants.</li><li>The GC Retention Index Library added over 35,000 compounds, further enhancing compound identification workflows.</li><li>The underlying NIST MS Search software has also been extensively updated and now includes chromatogram analysis for GC-MS or LC-MS/MS workflows.</li><li>From 2026, the EI and MS/MS libraries are available as separate products. Both can be ordered through Wiley, with bundle options available.</li></ul>“Wiley distributes NIST EI 2026 in more instrument formats than any other NIST 2026 provider,” said Graeme Whitley, Senior Director, Data Science Solutions at Wiley. “In addition to the standalone NIST libraries, Wiley also offers customers the option to extend their capabilities with the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/887">Wiley Registry </a>and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/934">KnowItAll GC-MS</a> and <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/1942">LC-MS libraries</a>, delivering broader coverage and flexibility for evolving analytical workflow needs.”The EI library is available in multiple instrumentation manufacturer formats, while the MS/MS library is provided in NIST format. Together, these libraries support high-confidence analysis across GC-MS and LC-MS workflows, helping laboratories confidently improve identification and streamline analytical processes.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Wiley_NIST_MS_MS_Mass_Spectral_Library_2026_899749d679.jpg" alt="Wiley: NIST MS/MS Mass Spectral Library 2026" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Wiley_NIST_MS_MS_Mass_Spectral_Library_2026_899749d679.jpg 110w," sizes="100vw" width="1526" height="2160"><h5>Learn more at Wiley Science Solutions:</h5><ul><li>Visit our web for more information about the <a target="_blank" rel="noopener noreferrer" href="https://sciencesolutions.wiley.com/solutions/technique/gc-ms/nist-epa-nih-mass-spectral-library/">NIST/EPA/NIH EI Mass Spectral Library 2026</a></li><li>Visit our web for more information about the <a target="_blank" rel="noopener noreferrer" href="https://sciencesolutions.wiley.com/solutions/technique/lc-ms/nist-ms-ms-mass-spectral-library-2026/">NIST MS/MS Mass Spectral Library 2026</a></li></ul><h5>About Wiley</h5>Wiley is a global leader in authoritative content and research intelligence for the advancement of scientific discovery, innovation, and learning. With more than 200 years at the center of the scholarly ecosystem, Wiley combines trusted publishing heritage with AI-powered platforms to transform how knowledge is discovered, accessed, and applied. From individual researchers and students to Fortune 500 R&amp;D teams, Wiley enables the transformation of scientific breakthroughs into real-world impact. From knowledge to impact—Wiley is redefining what's possible in science and learning.&nbsp;

Wiley Releases NIST Mass Spectral Library 2026 in Multiple Instrument-Ready Formats

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 6th July 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you brochure by Agilent Technologies, presentation by MDCW / University of Washington and posters by Shimadzu / ASMS and Thermo Fisher Scientific / ASMS!<h3>1. Agilent Technologies: Operational efficiency for your GC and GC/MS labs with the Agilent 8860B gas chromatography system</h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/br_8860b_gc_5994_9206en_agilent_7b7b766cd2.pdf">Full PDF for download</a></li></ul><section><div><div><div><div><div><div>The brochure presents the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8860B">Agilent 8860B GC system</a> as a routine GC and GC/MS platform focused on operational efficiency, reliable performance, intelligent diagnostics, and sustainability. It is positioned as a next-generation GC workhorse for laboratories that need consistent, high-quality data while increasing throughput and reducing downtime. Key performance features include dual sample injection capabilities, improved repeatability for retention time and peak area, electronic pneumatics control, retention time locking for method transfer, and a built-in oven light to simplify maintenance and column installation.A major theme is instrument intelligence through the Agilent GC Assist interface. The system provides browser-based access to instrument status, methods, sequences, logs, diagnostics, maintenance information, and help resources. Built-in tools such as early maintenance feedback, system health reporting, automated and user-initiated diagnostics, peak evaluation, and self-guided troubleshooting are designed to help laboratories detect issues early, maintain uptime, and reduce the need for expert-level intervention during routine operation.The brochure also emphasizes sustainability and resource management. The 8860B GC includes gas and power usage reporting, method-based monitoring, alerts for abnormal gas use, and tools for detecting possible leaks or restrictions. Agilent highlights helium conservation options, including a helium conservation module that can reduce helium consumption by switching to an alternative gas during idle periods, as well as support for hydrogen and nitrogen carrier gases with built-in hydrogen safety features. These functions are presented as ways to reduce operating costs, conserve resources, and protect workflows from helium supply disruptions.Finally, the brochure describes the broader Agilent GC ecosystem around the 8860B. The system supports multiple inlets, detectors, autosamplers, headspace sampling, single quadrupole GC/MS compatibility, OpenLab CDS, DA Express, MassHunter software, Agilent consumables, columns, and CrossLab services. Together, these elements are presented as a complete workflow for routine laboratories that need flexibility, compliance support, service coverage, method consulting, training, and long-term value from their GC investment.<h3>2. MDCW / University of Washington: Implementing Tile-Based Fisher Ratio Analysis of GC×GC-TOFMS Data to Obtain a Master Peak Table of All Detected Analyte Compounds in Many Petroleum-Based Samples</h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_9_Halvorsen_136808e314.pdf">Full PDF for download</a></li></ul><section><div><div><div><div><div><div>The presentation describes the development of a chemometric workflow for advanced fuel sample analysis using GC×GC-TOFMS data. The work was carried out by the University of Washington in collaboration with Chevron Technical Center, with the goal of improving the characterization of complex petroleum-based samples. Moving from conventional GC to comprehensive two-dimensional GC increased peak capacity and chromatographic resolution, but also created the need for more advanced methods to generate reliable peak tables across many chemically diverse fuel samples.The key method presented is a tile-based Fisher Ratio approach implemented through <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/348">ChromaTOF Tile</a>. This method identifies analytes that show statistically significant concentration differences between sample classes. Instead of relying only on peak detection or manual alignment, the workflow uses chromatographic “tiles” to reduce the impact of retention-time shifting and to capture both major and trace-level components. The study included multiple fuel classes, including hydrobate, reformate, naphtha, FCC gasoline, and blanks.Because Fisher Ratio values alone do not directly indicate whether a compound is truly detectable, the authors added a blank-based p-testing strategy. Three blank chromatograms were used to estimate background signal distributions for each tile, and confidence intervals were then applied to determine whether each detected hit was present in individual sample classes. This produced a master peak table covering 719 hits across nine fuel sample classes. The results showed good reproducibility, with only 6.3% of classifications being heterogeneous across replicates.Overall, the presentation concludes that the tile-based workflow can generate comprehensive and reproducible peak tables with reduced user intervention, while preserving the ability to recover trace analytes in complex petroleum samples. The approach should be broadly applicable to other complex sample types and could also be adapted using chemometric metrics other than Fisher Ratio, depending on the experimental design and analytical goals.<h3>3. Shimadzu / ASMS: Is Your Next Sip Safe? A Simple, Rapid Method for Measuring volatile PFAS in Juices.</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/TP_143_Is_Your_Next_Sip_Safe_A_Simple_Rapid_Method_for_Measuring_volatile_PFAS_in_Juices_a6ed9414c0.pdf">Full PDF for download</a></li></ul>Per- and polyfluoroalkyl substances (PFAS) pollution is a growing global concern due to links with adverse health effects, many of which remain poorly understood. 1 Accurate detection and quantification are therefore essential. While PFAS analysis has traditionally focused on water, attention is rapidly expanding to food and beverages, where testing remains limited despite high stakes and increasing regulations. 2 A recent PFAS lawsuit against a juice manufacturer underscored the heightened public scrutiny of PFAS in juices, placing food safety and brand reputation at risk. 3 This study presents a Headspace Solid-Phase Microextraction– Triple Quadrupole Gas Chromatography/Mass Spectrometry (HS-SPME GC/MS/MS) method for PFAS quantitation in juices. GC/MS enables analysis of volatile PFAS unsuitable for LC/MS, while HS-SPME offers rapid analysis with minimal sample preparation in complex matrices.<h4>Methods</h4>A volatile PFAS analysis method was developed on a Shimadzu <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-TQ8040+NX">GCMS-TQ8040 NX</a> with an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=AOC-6000+Plus">AOC-6000 Plus multifunctional autosampler</a> equipped with a solid phase microextraction (SPME) module (Figure 1).<h4>Results&nbsp;</h4>The system was deemed free of contaminants and inferences. None of the target PFAS in the method blank were found in quantifiable concentration. In the study, the calibration curve for each target included at least seven calibrators. Calibration curve results showed a good linear fit for all compounds with coefficient of determination (R2 ) ≥ 0.993. The linear range and R2 of each PFAS target are shown in Table 3.<h4>Conclusion</h4>Overall, these results demonstrate the robustness and reliability of the method for PFAS analysis in two carton apple juices (Brands X and Y), one plastic bottled apple juice (Brand X), and a berry blend carton juice (Brand X). Given the diversity of matrices evaluated, the method may also be suitable for other beverages, including sports drinks and vitamin-enhanced waters<h3>4. Thermo Fisher Scientific / ASMS: Enhanced sensitivity for the quantitative analysis of pesticides using a GC Orbitrap MS</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_004706_lsms_pesticides_exploris_gc_efs_po004706_asms2026_na_en_5f51b18742.pdf">Full PDF for download</a></li></ul>Detection of pesticide residues in fruits and vegetables is essential for food safety, but it can be challenging in complex, highly pigmented matrices due to interferences. Orbitrap technology provides high resolution and mass accuracy, enabling confident identification of coeluting and isobaric compounds while reducing false results. Furthermore, the FS-HRAM acquisition enables simultaneous quantitation and screening within a single analysis with the capability of retrospective data analysis, allowing laboratories to reprocess datasets for additional or emerging compounds without re-injecting samples. The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2419">Orbitrap Exploris GC S mass spectrometer</a> features the Thermo Scientific NeverVent Advanced Electron Ionization Source (NVAEI) which offers an improved design providing enhanced sensitivity and robustness, allowing for increased instrument uptime and maximized sample throughput for rapid return on investment (ROI).<h4>Materials and methods</h4><h5>Data analysis&nbsp;</h5>Data was acquired, processed and reported using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/76">Thermo Scientific Chromeleon Chromatography Data System (CDS) software</a>, which provides integrated instrument control, automated workflows, and an intuitive interface for data analysis, customizable reporting, and compliant data management in accordance with FDA 21 CFR Part 11 and European Commission (EU) Annex 11. Its advanced reprocessing capability streamlines sequence setup, data review, and reporting offering the possibility to easily flag and check compliance with the current regulations.Results Compliant analyte identification The use of HRAM-GCMS reduces the matrix interferences ensuring a confident and selective identification of analytes (Figure 1). All target compounds satisfied the SANTE criteria at the default MRL of 10 µg/kg and more than 90% were confirmed at concentrations of 1 µg/kg following the SANTE/11312/2021v2026 guidance criteria of:&nbsp;<ul><li>two ions were detected for each pesticide with mass accuracy ≤ 5 ppm with precursor and product ions in the extracted ion chromatograms fully overlapped,&nbsp;</li><li>due to the added value of accurate mass measurement, matching ion ratios is not necessary, however, an ion ratio (IR) deviation within ± 30% (relative) of the average of calibration standards from the same sequence was considered to provide additional support for identification</li><li>retention times (RT) within a tolerance of ± 0.1 minutes</li></ul>Sensitivity performance (IDL) and analytical linearity Instrument sensitivity was evaluated using calculated IDLs derived from replicate injections of low-level, matrix-matched standards. The Orbitrap Exploris GC S demonstrated detection limits at levels at or below 0.5 µg/kg for most of the investigated pesticides (Figure 2). Linear dynamic range was evaluated using matrix-matched calibration curves ranging 0.5–200 µg/kg, with each calibration level injected in triplicate. All target analytes demonstrated excellent linearity, with coefficients of determination (R²) &gt; 0.993, response factor (%RSD) values below 20% across the calibration range, and ion ratios (IRs) within ±30% of the average calibration standard values. System suitability for quantitative analysis was confirmed by calculated concentrations within ±20% of expected values and recoveries ranging from 96% to 104%. An example of calibration curve for Aldrin is shown in Figure 3.<h4>Conclusions&nbsp;</h4>The results obtained in these experiments demonstrate that the Orbitrap Exploris GC S mass spectrometer equipped with NeverVent AEI ion source represents a reliable tool for analysis of pesticides in complex matrices.&nbsp;<ul><li>The Orbitrap Exploris GC S offers a simple approach for the multiresidue analysis of pesticides allowing for full-scan acquisition combined with high mass resolving power&nbsp;</li><li>The NeverVent AEI ion source is designed for ultra-trace concentration detection, making it ideal for challenging applications ensuring detection limits at levels at or below 0.5 µg/kg for most of the investigated pesticides&nbsp;</li><li>Confident identification of compounds can be easily achieved through i). high spectral quality, ii). high spectral fidelity, ensuring consistent spectrum independently from concentration, and iii). consistent mass accuracy irrespectively of analyte concentration and time&nbsp;</li><li>System suitability for quantitative analysis was demonstrated with R2 &gt;0.993, RF %RSD across the entire calibration curve &lt; 20, and IRs within ± 30% of the average of calibration standards, calculated amounts within 20% the expected values, and percentage recovery (%) ranging from 96 to 104.</li></ul></div></div></div></div></div></div></section></div></div></div></div></div></div></section>

News from LabRulezGCMS Library - Week 28, 2026

Article

Product

Scientists

Presentation

Software

Poster

RECETOX (Research Centre for Toxic Compounds in the Environment) is an independent department of the Faculty of Science of Masaryk University in Brno, which has been established in 1983. RECETOX is focused on the research and education in cross-cutting area of Environment and Health. It addresses interactions among chemicals, environment, and biological systems, including consequences at local, regional, and global levels.

RECETOX - Centrum pro výzkum toxických látek v prostředí

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

For over 200 years we have been helping people and organizations develop the skills and knowledge they need to succeed.
We develop digital education, learning, assessment, and certification solutions to help universities, businesses, and individuals move between education and employment and achieve their ambitions.

Wiley

Separation Science

Agilent Technologies

Markes International

Technology Networks

Thermo Fisher Scientific

Wasson-ECE Instrumentation

Shimadzu Corporation

Focus will be given to the safety, authenticity and quality of food and beverages as well as the future of food products such as meat substitutes and alternative proteins.
This online symposium will cover:
<ul>
<li>Untargeted food analysis using different MS platforms</li>
<li>Applications of near-infrared hyperspectral imaging in food quality control</li>
<li>Applications of behavioral science in food research</li>
<li>Solid phase micro-extraction for beverage analysis</li>
<li>Challenges and opportunities in fermentation for production of alternative proteins</li>
<li>ELNs to support data management in food and beverage labs</li>
<li>Key strategies for pesticide analysis using GC-MS</li>
<li>Nutritional and toxic plant-based elemental analysis using ICP-MS</li>
</ul>
<blockquote>
Presenter: Brian Quinn, PhD (Head of Mass Spectrometry, Queen&#39;s University Belfast)
</blockquote>
<blockquote>
Presenter: Vincent Baeten, PhD (Scientific Director, Walloon Agricultural Research Centre)
</blockquote>
<blockquote>
Presenter: Michelle Niedziela, PhD (VP of Research &amp; Innovation, HCD Research)
</blockquote>
<blockquote>
Presenter: Erich Leitner, PhD (Professor, Graz University of Technology)
</blockquote>
<blockquote>
Presenter: Stefan Cretnik, PhD (Product Manager, PAL System)
</blockquote>
<blockquote>
Presenter: Theresa Liao (Content Specialist, SciNote)
</blockquote>
<blockquote>
Presenter: Wade Opperman (Manager of the Americas, SciNote)
</blockquote>
<blockquote>
Presenter: Moran Farhi, PhD (VP of Research, The Better Meat Co.)
</blockquote>
<blockquote>
Presenter: Liyan Xing, PhD (Senior Application Scientist, PerkinElmer)
</blockquote>
<blockquote>
Presenter: Anastasia Andrianova, PhD (GC/MS Applications Scientist, Agilent Technologies)
</blockquote>

Technology Networks: Advances in Food & Beverage Analysis 2023

Advances in Food & Beverage Analysis 2023

The third edition of this online symposium will provide industry and academic scientists with the opportunity to hear from experts from across the field.

In part II of the webinar series, a fast and automated workflow for the quantitative analysis of microplastics in complex matrices will be discussed along with the identification, and quantification of microplastics in air samples using the micro-furnace Pyrolysis-GC/MS. We will also show the power of an intelligent search engine (F-Search MPs) for data analysis and quantitation of Microplastics polymers. 
We will host a Q&amp;A session after the presentation to address any questions or comments.
<blockquote>
Presenter: Alan Owens (GCMS Product Manager, Shimadzu Scientific Instruments)
</blockquote>
<blockquote>
Alan Owens is the GCMS Product Manager at Shimadzu Scientific Instruments. Alan received his B.S. degree in Biology and Chemistry from Hampden-Sydney college. He then joined Shimadzu as a GCMS Product Specialist at the corporate headquarters in Columbia, MD. Before his time with Shimadzu, he comes from a flavor and fragrance background with expertise in advanced sample introduction techniques such as SPME and Dynamic headspace. He has since expanded into all sample introduction techniques specifically tailored towards Pyrolysis with a heavy influence of plastics and polymers.
</blockquote>
<blockquote>
Presenter: Rojin Belganeh (Technical &amp; Marketing Director, Frontier Laboratories-North America)
</blockquote>
<blockquote>
Rojin Belganeh is the Technical &amp; Marketing Director at Frontier Laboratories-North America. Rojin graduated from the University of Houston with a Bachelor of Science in Chemistry. She started her profession as an analytical chemist in oil &amp; gas industry in 2012. As an analytical chemist, Rojin worked with various analytical instruments, such as Pyrolysis GCMS, TGA, FTIR, and X-Rays for material characterization, polymer identification, and contamination analysis. She also holds an MBA degree concentrating in strategic marketing from the University of Houston-Victoria. As a former user for more than five years, Rojin joined Frontier Laboratories in May of 2017. She is very passionate in creating awareness about Frontier technology and providing technical support to users.
</blockquote>
<blockquote>
Presenter: Athena Nguyen (Technical Support Scientist, Frontier Laboratories-North America)
</blockquote>
<blockquote>
Athena Nguyen is a Technical Support Specialist at Frontier Labs Americas. She graduated from the University of Houston with a bachelor’s degree in science in chemistry in 2014. The first three years after graduating, Athena worked as an analytical chemist. She has experience using multiple analytical instruments, including GC/MS/FID/ECD, with applications in the oil and gas industry. Athena joined Frontier Lab in 2020 and provides technical and product support to Frontier’s users.
</blockquote>
<blockquote>
Presenter: Andy Sandy (GCMS Application Scientist, Shimadzu Scientific Instruments)
</blockquote>
<blockquote>
Andy Sandy is a Gas chromatography-Mass Spectrometry (GC-MS) Applications Scientist at Shimadzu Scientific Instruments, USA. In 2016, he joined the company. At Shimadzu he is a part of a dynamic application group, which is responsible for developing applications that provide solutions to complex analytical issues. Prior to working at Shimadzu, he completed a post-doctoral study at University of Illinois at Chicago, where he focused on developing environmental analytical methods for identifying and measuring emerging contaminant in the environment.
</blockquote>

Shimadzu: Novel Microplastics Applications utilizing Pyrolysis GC-MS

Novel Microplastics Applications utilizing Pyrolysis GC-MS

A fast and automated workflow for the quantitative analysis of microplastics in complex matrices and air will be discussed using Pyrolysis-GC/MS.

Webinars will cover the following Gas Chromatography topics:
<ul>
<li>6/27 - Vaporizers for LPG Samples</li>
<li>7/11 - Dynamic Blending for Linearity and LDL</li>
<li>7/18 - GC Valves: Purposes and Service</li>
<li>7/25 - Calibration Techniques for Accurate Data</li>
<li>8/1 - Sample Capture, Transport, and Introduction</li>
<li>8/8 - GC Detectors I: PDHID and SCD</li>
<li>8/15 - GC Autosamplers for Gas and LPG Samples</li>
<li>8/22 - GC Detectors II: The Strengths of Mass Spectrometry</li>
<li>8/29 - Methanizers for Trace CO &amp; CO2</li>
<li>9/5 - Training Program for GC Operators</li>
</ul>
<blockquote>
Presenter: John Wasson (President, Wasson-ECE Instrumentation, Inc.)
</blockquote>
<blockquote>
John Wasson has over 40 years of experience in Gas Chromatography and Chemical Instrumentation.
</blockquote>

Wasson-ECE Instrumentation: Free GC Webinar Series

Calibration Techniques for Accurate Data

The release of chemicals from products and materials has been at the centre of increased scrutiny from regulators, industry and consumers alike. Concerns over the effects of volatile and semi-volatile organic compounds (VOCs and SVOCs) on human health, consumer comfort, and product performance are increasing.
Analysts need a robust and reproducible approach to sample these emissions from a wide variety of materials and products, for analysis by GC-MS, to answer such questions as: What’s that smell? Is my product safe? Is there anything toxic in my home/car? How can I detect a harmful chemical from a material?
This webinar addresses the use of an innovative, robust and cost-effective sampling device, the Micro-Chamber/Thermal Extractor, combined with the powerful analytical capabilities of thermal desorption-gas chromatography mass spectrometry.
Several case studies are presented that highlight the implementation of this versatile sample preparation system covering:
<ul>
<li>PFAS testing
</li>
<li>Volatiles that effect indoor and in-vehicle air quality
</li>
<li>Identification of chemical weapons on clothing
</li>
<li>Determination of off gassing compounds that effect semiconductors
</li>
</ul>
Who should attend:
<ul>
<li>Those interested in or using GC, GC–MS</li>
<li>Application specialists</li>
<li>Contract laboratories</li>
<li>Academics</li>
<li>Industry scientists</li>
</ul>
<blockquote>
Presenter: Caroline Widdowson (Marketing Development Manager - Thermal Desorption, Markes International)
</blockquote>
<blockquote>
Caroline is the marketing development manager for thermal desorption at Markes International, having completed her chemistry degree at Cardiff University in 2004, followed by a Ph.D. in organic chemistry. As part of her current role, Caroline advises manufacturers, test laboratories, and research institutes on equipment needed to monitor indoor air and study chemical emissions from materials used indoors or in vehicle interiors. Caroline also participates in ASTM and CEN standards and regulatory committees relating to this area.
</blockquote>
<blockquote>
Presenter: Aaron Davies (Commercial Marketing Manager - Thermal Desorption, Markes International)
</blockquote>
<blockquote>
Aaron is the commercial marketing manager for thermal desorption at Markes International. After graduating from Cardiff and Monash Universities with a Ph.D. in Chemistry, Aaron has worked in industry as a Process and Product Development Chemist, GC GCMS Product Specialist before finally focusing on his passion for Thermal Desorption. In his role, Aaron assists customers and partners on the effective use of thermal desorption for simplifying sample preparation and the benefits of using alternative carrier gases (such as hydrogen and nitrogen) to helium.
</blockquote>

Separation science: Simplifying GC–MS sample preparation for product and material testing

Simplifying GC–MS sample preparation for product and material testing

The use of an innovative, robust and cost-effective sampling device, the Micro-Chamber/Thermal Extractor.

Simplifying GC–MS sample preparation

Welcome to Thermo Fisher Scientific’s Powering Productivity in Food and Environmental Testing webinar series!
Sample preparation for POPs analysis creates one of the biggest bottlenecks in the analytical workflow. With such diverse matrices and compounds of potential interference, the sample prep process can be very manual and therefore prone to introducing errors- threatening productivity in food and environmental testing labs globally.
In this presentation, our expert Chris Shevlin will introduce a new solution for automating this process, allowing you to extract your analyte of interest, whether a pesticide, dioxin or organic pollutant, in a way that is robust, reproducible and enables your lab to become more efficient by handling multiple samples and extractions at the same time.
<blockquote>
Presenter: Chris Shevlin (Scientific and Educational Affairs Manager, Thermo Fisher Scientific)
</blockquote>
<blockquote>
Chris Shevlin is the Scientific and Educational Affairs Manager for Ion Chromatography and Automated Sample Preparation systems at Thermo Fisher Scientific. After graduating from the University of Buffalo, he started working in a pharmaceutical laboratory running HPLC, LC-MS and other chromatographic methods in a technical services and QC laboratory. After earning an MBA in 2004, Chris has worked in sales, product management and marketing with a few of the major analytical instrument manufacturers since then.
</blockquote>
<blockquote>
In 2015, Chris joined Thermo Scientific working with their chromatography and mass spectrometry systems and in 2019 moved into a product marketing role for Ion Chromatography and Automated Sample Preparation business unit. In his current role, he is partnering with scientists on new applications through collaborations, developing scientific and educational content, and working with new products and innovations.
</blockquote>

Thermo Scientific: Recent Advances in Sample Prep for POPs

Recent Advances in Sample Prep for POPs

New solution for automating this process, allowing you to extract your analyte of interest, whether a pesticide, dioxin or organic pollutant.

The 8700 provides an easy flow for analysis of microplastics so that non-spectroscopists can generate accurate, reliable data without prior experience using an infrared microscope.
<blockquote>
Presenter: Louis Tisinger (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.
</blockquote>

Agilent Technologies: Easy Workflow for Analysis of Microplastics

Easy Workflow for Analysis of Microplastics

The 8700 provides an easy flow for analysis of microplastics so that non-spectroscopists can generate accurate, reliable data.

Join SepSolve Analytical as they demonstrate how the latest advances in GC×GC hardware and software are extending the capabilities of the technique from the niche to the mainstream.
Flow modulation of the gas stream overcomes the practical difficulties of applying GC×GC for routine analyses and has reduced cost of ownership. Easy-to-use chemometrics tools make life easier by preventing data processing becoming the bottleneck of analytical workflows.
In this presentation, we’ll cover some fascinating examples of real-life applications that have benefited from the separating power of GC×GC, in both research and routine laboratories. These include biomarker discovery, aroma profiling and environmental monitoring:
<ul>
<li>Total petroleum hydrocarbons (TPH) – Robust and routine monitoring of total petroleum hydrocarbons (TPH) in environmental matrices using GC×GC-FID.
</li>
<li>Chemical fingerprinting of pyrolysis oils – Detailed characterisation of pyrolysis oils from solid waste plastics using GC×GC–TOF MS to identify possible contaminants, and help to refine process design.
</li>
<li>Biomarker discovery – Thermal desorption coupled with GC×GC–TOF MS to capture comprehensive breath profiles and uncover potential biomarkers of disease.
</li>
<li>Aroma profiling – Comparison of whisky aroma profiles by SPME–GC×GC–TOF MS to distinguish between whiskies from different regions and evaluate the impact of maturation.
</li>
</ul>
By attending this presentation you will:
<ul>
<li>Learn the basics of GC×GC and what it offers over and above standard GC
</li>
<li>Debunk the myths of GC×GC being a ‘research-only’ tool
</li>
<li>See how cutting-edge software tools can simplify everyday use of GC×GC
</li>
<li>Familiarise yourself with the latest GC×GC applications
</li>
</ul>
Who should attend:
<ul>
<li>GC and GC-MS users who want to enhance their ability to analyse complex samples
</li>
<li>Separation scientists who want to find out more about GC×GC
</li>
<li>GC×GC practitioners wanting to further their knowledge on recent advances in applications, hardware and software
</li>
</ul>
<blockquote>
Presenter: Laura McGregor (Product Marketing Manager, SepSolve Analytical)
</blockquote>
<blockquote>
Laura McGregor received an M.Chem. in chemistry from the University of St Andrews, UK, followed by an M.Sc. in forensic science at the University of Strathclyde, UK. Her Ph.D. in environmental forensics, also at the University of Strathclyde, sparked her interest in GC×GC and she has been a strong advocate of the technique ever since. In her current role as Product Marketing Manager at SepSolve Analytical, she continues to apply GC×GC–TOF MS to challenging applications.
</blockquote>

Separation Science: Demystifying comprehensive two-dimensional gas chromatography (GC×GC)

Demystifying comprehensive two-dimensional gas chromatography (GC×GC)

Examples of real-life applications that have benefited from the separating power of GC×GC, in both research and routine laboratories.

Comprehensive two-dimensional gas chromatography (GC×GC)

MOSH and MOAH refer to Mineral Oil Saturated Hydrocarbons and Mineral Oil Aromatic Hydrocarbons. These mineral oils are hydrocarbon mixtures containing hundreds of chemical compounds of various sizes and structural configurations which are mainly derived from crude oil. Also, they are derived from liquefaction of coal, natural gas, and biomass.
MOAH are hydrocarbons majorly consisting of highly alkylated mono- and/or poly-aromatic rings. These compounds can be found everywhere in the environment, whereas MOSH are paraffin-like, open chained, commonly branched hydrocarbons (e.g., alkanes) and naphthene-like cyclic hydrocarbons (cycloalkanes).
The analysis of such contaminants in food is a challenging task and requires a comprehensive approach to tackle the cumbersome issues related to their determination. Additionally, their toxicity is still under investigation and requires further studies supported by more detailed analytical data.
In this live webinar in association with Gulf Bio Analytical LLC (GBA), you will learn:
1. Basics of MOSH/MOAH Analysis
2. Tackling challenges of MOSH/MOAH Analysis
3. Hyphenated chromatographic techniques as powerful tools to gain deeper insights into the MOSH and MOAH problem
Who should attend: Lab chemists, scientists, R&amp;D chemists, lab managers, technical assistants, food chemists
Why you should attend: To learn and mitigate challenges of MOSH/MOAH analysis through unique technologies
Hurry, register today.
<blockquote>
Presenter: Sajit Parameshwaran (Product Manager, Chromatography and Mass Spectrometry, Gulf Bio Analytical LLC (GBA))
</blockquote>
<blockquote>
Sajit Parameshwaran is currently working as a Product manager, Chromatography &amp; Mass Spectrometry in the Gulf Bioanalytical group, located in Dubai. He has completed his Masters in Analytical chemistry from Mumbai university. Prior to joining Gulf Bioanalytical, he worked as an application specialist &amp; HPLC trainer at Agilent Technologies India Pvt. Ltd. He has more than 20 years of experience in the analytical instrumentation industry. In the current organization, he has been instrumental in delivering application training and method setup on chromatography and mass spectrometry instruments related to food testing, forensics, petrochemicals and pharmaceuticals. In his current role, he is responsible to provide the right instrument solutions based on customer’s application requirements. He is actively involved in delivering talks in various webinars &amp; seminars on new product technologies and applications catering to applied markets.
</blockquote>

Agilent Technologies: Let's Talk MOSH/MOAH Analysis

Let's Talk MOSH/MOAH Analysis

Basics of MOSH/MOAH Analysis. Tackling challenges of MOSH/MOAH Analysis. Hyphenated chromatographic techniques.

The air we breathe may be slowly killing us and growing concerns over the harmful effects of hazardous air pollutants have led to increase in volatile organic compound (VOC) monitoring programs worldwide. Regulations are evolving, requiring laboratories to monitor more compounds more frequently and to detect ever-lower levels in ambient air. In India experts are considering updating and improving the country’s standard VOC monitoring methodologies.
The classes of chemical compound that contribute to ‘air pollution’ are diverse and each group presents unique challenges to air monitoring. Thermal desorption coupled with gas chromatography offers a simple, robust, solvent and cryogen-free solution to routine monitoring of many air pollutants.
In this presentation Dr S. K. Tyagi will outline the challenges of air pollution and how methods for tackling it are evolving in India. Hannah Calder of Markes International will introduce the instrumentation at the heart of these new methods – analytical thermal desorbers. 
By attending this webinar you will learn:
<ul>
<li>How India’s VOC monitoring methods are evolving and what to expect in the future</li>
<li>How thermal desorption–GC-MS can be implemented to help monitor and tackle pollution</li>
<li>When to utilise offline and online techniques to answer specific environmental concerns</li>
</ul>
Why should you attend?
This is a unique opportunity to hear and engage with Dr Tyagi on his work related to VOC monitoring and the creation of standard methods to do this in India. 
You will also learn how techniques such as sorbent tube sampling, canister sampling and online monitoring can simplify the process of monitoring pollution and increase data confidence from Markes&#39; Senior Environmental Specialist, Hannah Calder.
Who should attend?
<ul>
<li>Those interested in standardisation and methods for monitoring VOCs</li>
<li>Research institutes</li>
<li>Government laboratories</li>
<li>Contract laboratories interested in offering VOC monitoring services</li>
</ul>
<blockquote>
Presenter: Dr Tyagi
</blockquote>
<blockquote>
Presenter: Hannah Calder (Markes&#39; Senior Environmental Specialist)
</blockquote>

Markes International: The invisible toxic in air we breathe

The invisible toxic in air we breathe

We will outline the challenges of air pollution and how methods for tackling it are evolving in India and introduce analytical thermal desorbers.

What&#39;s the connection between nirosamine impurities and mass spectrometry?
How do you ensure your lab is ready to handle and analyze any API or formulation sample at any time?
Get answers to these questions in this The Lab Central premiere.
<blockquote>
Presenter: Preeti Bharatiya (Application Engineer LC-MS/MS, Agilent Technologies)
</blockquote>
<blockquote>
Presenter: Dr. Soma Dasgupta (Application Engineer GC/MS, Agilent Technologies)
</blockquote>