In this technical tip from Phenomenex, the topic of gas chromatography (GC) column trimming is addressed from a troubleshooting perspective. The key question explored is whether trimming a GC column is necessary and how it impacts chromatographic performance.<h3>Why Trim a GC Column?</h3>Column trimming is primarily used to restore chromatographic performance by removing damaged or contaminated sections, typically located at the column inlet.<h5>1. Baseline Bleed, Noise, Ghost Peaks, Poor Peak Shape</h5><ul><li>Cause: Column contamination</li><li>Removing the contaminated stationary phase at the column entrance helps restore performance.</li></ul><h5>2. Elevated Baseline (Especially at High Temperature)</h5><ul><li>Cause: Column bleed</li><li>Degradation of the stationary phase due to oxygen exposure or thermal damage leads to increased baseline.</li></ul><h5>3. Ghost Peaks (Peaks Without Injection)</h5><ul><li>Cause: Residual sample or contamination</li><li>Compounds trapped at the beginning of the column can appear as peaks even when no sample is injected.</li></ul><h5>4. Peak Tailing (Asymmetrical Peaks)</h5><ul><li>Cause: Damaged or contaminated column sections</li><li>These issues result in adsorption effects or poor flow dynamics.</li></ul><h5>5. Retention Time Shifts</h5><ul><li>Cause: Contamination or damage near the inlet</li><li>Although trimming slightly changes retention time, it can correct shifts caused by inlet-side issues.</li></ul><h5>6. Baseline Noise and Spikes</h5><ul><li>Cause: Particulate matter or degraded stationary phase</li><li>These can lead to detector instability and random signal fluctuations.</li></ul><h5>7. Baseline Drift or Wander</h5><ul><li>Cause: Contamination or oxidized column sections</li><li>Removing these regions stabilizes the baseline.</li></ul><h5>8. Loss of Resolution or Sensitivity</h5><ul><li>Cause: General column degradation</li><li>Trimming removes the most exposed and damaged portions, effectively rejuvenating column performance.</li></ul><h3>How to Trim a GC Column</h3>A capillary GC column consists of:<ul><li>Polyimide outer coating (protective layer)</li><li>Fused silica tubing (fragile but flexible core)</li></ul><h3>Step-by-Step Procedure</h3><h5>1. Scoring the Column</h5><ul><li>Use a ceramic wafer</li><li>Hold it at an inclined angle</li><li>Score the polyimide coating perpendicular to the column</li></ul><h5>2. Breaking the Column</h5><ul><li>Perform a quick, decisive flick</li><li>This ensures a clean, square cut</li></ul><h5>3. Inspecting the Cut</h5>After trimming, visually inspect the column end.<h3>Examples of Column Cuts</h3><h4>Good Cut</h4><ul><li>Clean, square end</li><li>Ensures proper sealing and connection</li></ul><h5>Bad Cuts</h5><ul><li>Slight Irregularity<ul><li>Small imperfection at the edge</li><li>Can cause leaks and active sites</li></ul></li><li>Poor / Rough Cuts<ul><li>Uneven or jagged edges</li><li>Lead to:<ul><li>Poor connections</li><li>Active sites</li><li>Peak tailing</li></ul></li></ul></li></ul><h2>Conclusion</h2>Trimming a GC column is a simple yet effective troubleshooting step. By removing contaminated or damaged sections—especially near the inlet—it can resolve a wide range of chromatographic issues, including baseline instability, ghost peaks, and loss of performance.Proper cutting technique is essential to avoid introducing new problems such as leaks or active sites.

Trimming a GC Column: Purpose, Symptoms, and Proper Technique

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 30th March 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, Thermo Fisher Scientific, brochure by Shimadzu and presentation by MDCW / LECO!<h3>1. Agilent Technologies: Extraction and Analysis of Pesticides from Water by Solid Phase Extraction and GC/MS</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_extraction_analysis_pesticides_water_gcms_5994_8996en_agilent_28fc35d0e7.pdf">Full PDF for download</a></li></ul>Drinking water is defined as water intended for human consumption obtained from different sources. Several guidelines/regulations exist for ensuring that undesirable substances such as pesticides are not present in excessive amounts that may be harmful to human health. These regulations ensure that water intended for human consumption can be consumed safely. In India, the Bureau of Indian Standards (BIS) has set regulatory limits for residual pesticides in drinking water (IS 10500)1 , packaged drinking water (IS 14543)2 , and natural mineral water (IS 13428).3 A total of 26 pesticides are regulated by BIS standards, of which four compounds (monocrotophos, phorate, 2,4-D, and isoproturon) are more suitable for analysis by liquid chromatography.&nbsp;EPA Method 525.2 is a general-purpose method for determination of organic compounds in finished drinking water or water from any source or treatment stage.4 This method is applicable to a range of organic compounds that are partitioned from the water sample onto a C18 organic phase packed in a disk or cartridge. The organic compounds are then eluted using a suitable eluent, concentrated, and analyzed by GC/MS.&nbsp;This application note describes the use of EPA Method 525.2 for extraction of pesticide residues at trace levels in water using solid-phase extraction (Agilent Bond Elut C18: Straight barrel cartridges, p/n 12102118) and analysis using Agilent 8890-5977 GC/MS.&nbsp;Excellent linearity with R2 &gt; 0.995 was obtained for all pesticides considered for the study. Recoveries were obtained in the range of 80–120% with associated RSDs &lt; 15% at 0.005–0.080 ng/mL level of fortification.<h4>Experimental</h4><h5>Instrument parameters</h5><ul><li>GC: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=8890">Agilent 8890</a></li><li>Column: Agilent <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=J%26W+HP-5ms">J&amp;W HP-5ms</a> UI 30 m × 0.25 mm, 0.25 μm&nbsp;</li><li>Carrier Gas: Helium, constant flow, 1.2 mL/min&nbsp;</li><li>Inlet: Agilent Multimode Inlet (MMI)</li><li>MS: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=5977">5977 GC/MS</a></li></ul><h4>Conclusion&nbsp;</h4>A simple, easy, and efficient method based on EPA 525.2 was implemented for the determination of 22 pesticides in water. The method demonstrated good sensitivity, precision, and accuracy, and allows for rapid analysis. The results demonstrate that pesticide residues can be detected below the current maximum residue levels (MRL) required by the BIS specifications. Acceptable recoveries and precision were obtained at concentrations as low as 5 ng/L for all pesticides. The method is ideally suited for use in a regulatory laboratory for the determination of pesticides in surface, drinking, and packaged drinking water.<h3>2. MDCW / LECO: Exploring PFAS in Consumer Goods Using GCxGC and High-Resolution Mass Spectrometry</h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_3_Alonso_6f61e3ea43.pdf">Full PDF for download</a></li></ul>Per- and polyfluoroalkyl substances (PFAS) are widely used in consumer and industrial products due to their unique physicochemical properties, but their persistence and potential health risks have made their detection increasingly important. This study focuses on developing an untargeted analytical approach for screening PFAS and related compounds in consumer goods using advanced chromatographic and mass spectrometric techniques.The analytical workflow combines gas chromatography with time-of-flight mass spectrometry (GC-TOFMS) and comprehensive two-dimensional gas chromatography coupled with high-resolution TOFMS (GC×GC-HRTOFMS), using systems such as the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1097">LECO Pegasus® BTX </a>and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/38">Pegasus® HRT+</a> platforms. Sample introduction is performed via thermal desorption or pyrolysis, enabling analysis of both volatile and complex matrices. High-resolution MS provides accurate mass measurements and elemental composition, which are essential for identifying unknown compounds and reducing matrix interferences.In the first case study, anti-fog solutions were analyzed and found to contain a wide range of compounds, including fluorotelomer alcohols and related PFAS species. While GC-TOFMS enabled initial screening, high-resolution TOFMS was necessary to characterize unknown compounds through accurate mass determination and complementary ionization techniques (EI and PCI). This approach allowed tentative structural assignment using external databases, demonstrating the importance of HRMS in identifying compounds not present in standard libraries.The second case study focused on chewing gum, a highly complex matrix with diverse chemical constituents and trace-level analytes. The use of GC×GC-HRTOFMS significantly improved chromatographic separation and spectral clarity, enabling detailed profiling of volatile and semi-volatile compounds. A dedicated PFAS screening workflow based on mass defect analysis and spectral filtering was applied, leveraging the characteristic CF₂ patterns of PFAS molecules to simplify data interpretation.Despite the complexity of the sample, no PFAS were detected in the chewing gum, its packaging, or the box. Overall, the study demonstrates that combining GC×GC separation, high-resolution mass spectrometry, and advanced data processing tools provides a powerful and reliable strategy for untargeted PFAS screening in complex consumer products, particularly when unknown or emerging contaminants are of concern.<h3>3. Shimadzu: Gas Chromatograph Nexis GC-2060</h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/c184_e056_06c3456516.pdf">Full PDF for download</a></li></ul>The Shimadzu <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=3&amp;search=Nexis+GC-2060">Nexis GC-2060</a> represents a new generation of gas chromatographs, built on over 70 years of GC development and designed to serve as a flexible and future-proof analytical platform. It integrates the concept of Analytical Intelligence, which enables automated system monitoring, troubleshooting, and optimization, helping both experienced and less experienced users achieve reliable and consistent results. The system is highly configurable, supporting up to two injectors, three injection units, and four detectors simultaneously, allowing a single instrument to cover multiple analytical applications.A key advantage of the Nexis GC-2060 is its versatility in sample introduction and detection. The Multi-Mode Injection Unit (MMI) supports a wide range of injection techniques, including split/splitless, PTV, direct injection, large-volume injection (LVI), and thermal desorption, significantly reducing the need for complex sample preparation. The system is also equipped with next-generation detectors such as FID and TCD, offering high sensitivity, stability, and linearity, with additional detector options (ECD, FPD, FTD, BID) enabling broad application coverage.The instrument is designed to maximize laboratory efficiency and minimize downtime. Features such as tool-free column installation (ClickTek), automated startup/shutdown, Easy sTop maintenance mode, and Clean Pilot for automated column conditioning simplify routine operation and reduce manual intervention. In addition, Eco Idling technology automatically optimizes gas and power consumption during standby, significantly lowering operational costs while maintaining readiness for analysis.From an analytical performance perspective, the Nexis GC-2060 delivers excellent reproducibility and sensitivity, supported by advanced autosamplers (e.g., AOC-30) and compatibility with third-party systems. The platform supports hydrogen carrier gas for faster analysis and includes smart gas management features such as automatic gas switching. Its modular design allows seamless integration with various sample preparation systems, autosamplers, and detectors, ensuring adaptability to evolving laboratory needs.Overall, the Nexis GC-2060 combines high performance, operational efficiency, and flexibility in a single platform, making it suitable for a wide range of applications, including pharmaceutical analysis, environmental testing, food analysis, and energy-related measurements. Its scalability and continuous software updates ensure long-term usability and alignment with future analytical requirements.<h3>4. Thermo Fisher Scientific: Accurate multi-component blast furnace gas analysis maximizes iron production and minimizes coke consumption</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/epm_AN_Iron_Production_Prima_PRO_bd5de98b44.pdf">Full PDF for download</a></li></ul>Over a billion tonnes of iron a year are produced in blast furnaces, representing around 94% of global iron production¹. The blast furnace consists of a large steel stack, lined with refractory brick. Iron ore, coke and limestone are dropped into the top of the furnace and preheated air blown into the bottom through nozzles called ‘Tuyeres’. Iron oxides are reduced in the melting zone, or ‘Bosh’, forming liquid iron (called ‘hot metal’) and liquid slag. These liquid products are drained from the furnace at regular intervals, and the blast furnace will run continuously for several years, until the refractory lining needs replacing.Analysis of carbon monoxide (CO) and carbon dioxide (CO₂) give vital information on the efficiency of the reduction processes. Historically, two non-dispersive infrared (NDIR) analyzers were used, one to measure CO, the other CO₂. Additional discrete analyzers were required to monitor oxygen and hydrogen – typically paramagnetic O₂ analyzers and thermal conductivity analyzers for H₂.&nbsp;Thermo Scientific™ process mass spectrometers have been widely used for many years for key gas analysis applications in iron and steel plants, including blast furnace, basic oxygen steelmaking, coke oven gas analysis, secondary steel process control, fuel gas analysis and direct reduction iron processes²<h4>Process control requirements&nbsp;</h4>The advantages of process MS over conventional analysis techniques have been proven over many years in the iron and steel industry. The ability to measure a wide range of components on a single analyzer, coupled with advanced calibration, data transmission, and self-diagnostic software, makes the modern mass spectrometer ideal for integration into the modern plant. On blast furnaces, superior gas analysis is being used to calculate gas efficiency, mass and heat balances, and heat profiles through probe analysis, as well as being an essential tool in the early detection of cooling water leaks and sample system failures.&nbsp;Figure 2 shows 64 hours of data from a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2305">Thermo Scientific™ Prima™ PRO Process MS</a> monitoring the six gases in a blast furnace top gas every 10 seconds. The pulse every 12 hours is generated by an automatic nitrogen blowback from the sample conditioning system, to keep the sample probe clear of particulates.<h4>Hydrogen analysis&nbsp;</h4>An increase in the hydrogen level in the furnace can indicate a leak from the furnace cooling system, as water dissociates into hydrogen and oxygen in the furnace. This has implications both for plant efficiency and plant safety. Water leaks will lower the furnace temperature, causing heat loss and a consequent increase in fuel consumption. In extreme cases, damage to plant and personnel can be caused by ignition of these hazardous mixtures of explosive gases.&nbsp;Figure 4 shows a plot of top gas hydrogen concentration measured by Thermo Scientific process MS over a 24-hour period, with the departure of the measured H2 value from that predicted by the mass balance model indicating a water leak. This leak was caused by the failure of a cooling member, and the furnace was taken off blast for repair. The mass spectrometer’s ability to provide fast, accurate hydrogen analysis removes the need for an additional discrete analyzer.&nbsp;Gas composition measurement is particularly important during the end-of-campaign blowdown that takes place prior to rebuilds and relines, because explosive gas mixtures can be generated.&nbsp;<h4>Probe analysis&nbsp;</h4>The fast analysis provided by MS offers another significant advantage over discrete analyzers—a number of process streams can be analyzed using a single instrument. This is achieved using a fully automated multi-inlet system, designed to switch between sample streams at high speeds with minimal sample flushing times. For example, as well as furnace top gas, the MS can also analyze gases from probes placed above and below the burden (the furnace charge of iron ore, coke and limestone). These are known as above-burden and sub-burden probes and provide valuable information on fuel efficiency, iron conversion and furnace charging. Figure 5 shows a schematic of these two probes; they can be moved across the furnace to build a cross-sectional profile of the furnace.<h4>Summary&nbsp;</h4>Thermo Scientific process mass spectrometers have been successfully monitoring blast furnace off gas at many of the world’s iron and steel companies for over 30 years. For a blast furnace producing 5,000 tonnes a day, a reduction in coke consumption of just 10 kg per tonne of iron produced provides a payback of over $10,000 a day. Users report that the combination of fast, accurate MS gas analysis for gas efficiency, heat and mass balances and hydrogen analysis, with advanced process control and mathematical modeling, has reduced coke consumption by up to 100 kg per tonne and increased iron production. Upgrading to Prima PRO MS can therefore result in complete installation payback within a few weeks.&nbsp;<ul><li>Reduces coke consumption&nbsp;</li><li>Produces consistent quality iron&nbsp;</li><li>Reduces downstream processing costs&nbsp;</li><li>Detects water leaks fast&nbsp;</li><li>Improves thermal control of furnace&nbsp;</li><li>Enables safer operation during blowdown</li></ul>

News from LabRulezGCMS Library - Week 14, 2026

<h3>We're excited to announce that <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999">Clarity Chromatography Software</a> version 10.1.2 is now available!</h3>This minor update expands Clarity’s portfolio with new control modules.<h4>Newly added Instrument control modules</h4><ul><li>Ecom auxiliary modules</li><li>HTA ICF control modules</li><li>Spark pump</li></ul><h4>Updated Instrument control modules</h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/168">Ecom</a> HPLC</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/328">Knauer</a> HPLC</li><li>Spark ICF control modules</li><li>YoungIn Chromass HPLC</li></ul><blockquote>For a complete list of module changes, see the <a target="_blank" rel="noopener noreferrer" href="https://www.dataapex.com/version_history?product=1">Changelog</a>. For more info about exciting new features directly in Clarity, explore what was introduced in the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/article/5622">Clarity 10.1 release highlights</a>.Clarity can control 1000+ instruments; the <a target="_blank" rel="noopener noreferrer" href="https://www.dataapex.com/controls">list can be previewed here</a>.</blockquote><h4>Supported Instruments in Clarity (DataApex) — Quick Guide</h4>Clarity Chromatography Software supports a wide range of chromatographs and peripherals via digital control (DD) and analog acquisition (A/D) using the Colibrick module.<h5>Gas Chromatographs (GC)</h5>Digital integration over LAN/RS232 (many via ICF):<ul><li>Agilent: 5890, 6890, 7890, 8860, 8890, Intuvo 9000</li><li>Shimadzu: GC-2010/2014, Nexis GC-2030</li><li>Thermo Fisher: TRACE 1300/1310</li><li>PerkinElmer: Clarus 400–690</li><li>Also supported: Dani, Ellutia, Young In Chromass, Apix, Fuli, GOW-MAC (selected models)</li></ul><blockquote>Note: Most Agilent 6890–8890 and Intuvo use LAN – ICF.</blockquote><h5>HPLC Systems</h5>Full system/module control:<ul><li>Agilent 1100–1290 Infinity II (ICF)</li><li>Shimadzu LC-10/20 and Nexera LC-40</li><li>PerkinElmer Flexar / NexSAR</li><li>Knauer Azura / BlueShadow / Smartline</li><li>Hitachi Chromaster / Primaide</li><li>Young In Chromass ChroZen series</li><li>Sykam S500–S600, Watrex Streamline, Hanon LC7000–7300</li></ul><h5>HPLC Modules (Pumps, Detectors, Ovens, Fraction Collectors)</h5><ul><li>Pumps: Agilent 1100–1290 families, Knauer, Shimadzu, PerkinElmer, Sykam, SSI, Ecom</li><li>Detectors: VWD/DAD(PDA)/RID/FLD/ELSD across Agilent, Shimadzu, Knauer, PerkinElmer, Young In Chromass, Ecom, etc.</li><li>Column Ovens: Agilent G1316x / G7116x, Shimadzu CTO-20/30/40, Knauer CT2.1, PerkinElmer Flexar</li><li>Fraction Collectors: Knauer FC 6.1, Teledyne FOXY series, Ecom ECF 2096, Waters Fraction Collector II</li></ul><h5>Autosamplers</h5><ul><li>Agilent GC ALS (7673/7683/7693/8697), HPLC ALS modules (G1313A–G7167C)</li><li>Shimadzu AOC-20 / AOC-5000+, SIL-10 / SIL-20 / SIL-40 series</li><li>CTC Analytics PAL, HTA autosamplers, Spark Alias/UHPLC, Knauer AS 6.1L</li><li>PerkinElmer Flexar / NexSAR AS</li></ul><h5>Other Devices</h5><ul><li>GC×GC modulators (e.g., Charles University GC×GC Modulator)</li><li>Valves &amp; switch modules (Agilent, Knauer, Shimadzu, VICI-Valco)</li><li>Degassers, flow monitors, managers, interfaces</li><li>LC-MS / GC-MS: Advion Expression CMS, Microsaic 4500 MiD, Markes BenchTOF (and others)</li><li>Balances (EA extension): Mettler Toledo, Sartorius</li></ul><h5>Analog Acquisition (Colibrick)</h5>A/D support for legacy or analog-output devices:<ul><li>GC: Agilent 5880/4890A, Varian 3xxx/3800/3900, PerkinElmer Clarus series, Thermo TRACE, Shimadzu GC-14/9A, Scion 43x/45x/83xx/85xx, etc.</li><li>HPLC Detectors: Waters 2487/2489, ESA Corona, Hitachi L-series, JASCO FP/UV, Ecom LCD series, many others</li><li>Elemental &amp; Amino Acid Analyzers: Carlo Erba/Costech ECS, Biochrom 20/30+</li></ul>If you are interested in a DEMO VERSION, contact us!

DataApex Clarity Chromatography software 10.1.2 just released!

Article

Product

Application

Academy

Presentation

Software

Video

Since 1991 DataApex develops and manufactures chromatography data stations. DataApex is constantly striving to provide users with efficient and up-to-date tools for chromatography data processing.

DataApex

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

Separation Science

Agilent Technologies

Thermo Fisher Scientific

Wasson-ECE Instrumentation

Waters Corporation

<ul>
<li>Wait what?! Who knew!? There are so many things that a mass spec can do.
</li>
<li>I&#39;ve used it for years, yes this may be true.
</li>
<li>I&#39;ve processed some samples, more than a few.
</li>
<li>But between me and you, I had no idea all the things it could do!
</li>
<li>From sample prep to separation, you just won&#39;t believe…
</li>
<li>All of the tips and tricks we have up our sleeve.
</li>
<li>So, take a few minutes, about 15 should do.
</li>
<li>And learn all the things your mass spec can do.
</li>
</ul>
Thinking of developing a new method utilizing MS? Selecting the best analytical method begins with a decision on how to best separate the analytes of interest. This choice will affect sample preparation and sample introduction, so it is important to get it right early. In this webinar we will review analyte structural properties that make the compound more amenable to either liquid chromatography or to gas chromatography.
<blockquote>
Presenter: Karen Yannell (LC/MS Application Engineer, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Karen E. Yannell is a LC/MS Application Engineer at Agilent Technologies. She is an expert in small molecule high throughput analysis by triple quadrupole (TQ) and quadrupole time-of-flight (QTOF) mass spectrometry for applied markets. Her recent work has focused on developing routine Q-TOF workflows for both expert and non-expert users alike. Previously, Karen worked on forensic, metabolomics, and biomarker discovery applications with ambient ionization sources. She received her PhD in Analytical Chemistry from Purdue University where studied under the advisement of Prof. R. Graham Cooks. Outside of the laboratory, she enjoys cooking unique dishes and hiking along the beach with her dog.
</blockquote>
<blockquote>
Presenter: David Weil, PhD (Senior Applications Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
David Weil is a senior applications scientist in Agilent located in Wood Dale with over 30 years of experience using mass spectrometry. Prior to joining Agilent in 2004, he worked for 14 years at 3M in the Corporate Research Analytical Laboratories (St.Paul, MN) and 4 years at Nicolet/Extrel doing ultra-high resolution mass spectrometry. David received his Ph.D. in Physical Chemistry from the University of Minnesota and Post Doc with Dr Charles Wilkins at University of California-Riverside developing laser desorption FTMS and ion-molecule reactions. David has three grown sons and live with his wife Naomi just blocks from Wrigley Field and Lake Michigan.
</blockquote>
<blockquote>
Presenter: Matt Curtis, PhD (GC/MS Applications Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Matt joined Agilent in 2013 as a GC/MS applications scientist in the Santa Clara, CA Center of Excellence. His primary responsibility is focused on providing instrument demos for customer interested in each technology Agilent offers; the GC/MS single quadrupole, triple quadrupole and the quadrupole Time-of-Flight. The variety of different samples submitted to the demo lab provide a unique knowledge of optimizing parameters for different applications to provide the best quality data from the instrument.
</blockquote>

Agilent Technologies: Selecting your Separation: Are my Compounds Better for GC or LC

Selecting your Separation: Are my Compounds Better for GC or LC

We will review analyte structural properties that make the compound more amenable to either liquid chromatography or to gas chromatography.

Separation selection: Are my Compounds Better for GC or LC

This presentation will introduce you to the Agilent flow path solutions for residual solvents, terpenes, and pesticide testing in cannabis and hemp. We will discuss how we have made it easier for you to get up and running quickly with e-Methods, application notes, and consumable kits.
<blockquote>
Presenter: Simon Jones (GC Applications Engineer/Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Simon Jones has over 23 years of GC experience. For the last 15 years, he has been with Agilent as a GC applications engineer/scientist based out of the GC column manufacturing facility in Folsom California. In his roles he has assisted with application development, troubleshooting chromatographic issues, and assisting with instrument configurations. Prior to joining Agilent in 2005, he worked in an analytical lab for the power industry, developing and optimizing testing methodologies for insulating fluids and materials in transformers.
</blockquote>

Agilent Technologies: Agilent GC/MS Solutions for Cannabis and Hemp Testing

Agilent GC/MS Solutions for Cannabis and Hemp Testing

This presentation will introduce you to the Agilent flow path solutions for residual solvents, terpenes, and pesticide testing in cannabis and hemp.

In response to the problems laboratories have had with helium shortages, a holistic solution was developed for predictable transition of GC/MS analysis to hydrogen carrier gas. This presentation provides an overview of several successful hydrogen implementations, including pesticides, volatile organics (VOAs), semivolatiles (SVOCs), polycyclic aromatic hydrocarbons (PAHs), flavors and fragrances (F&amp;F), and explosives.
New MassHunter with AI Peak Detection will revolutionize how labs operate by dramatically reducing turnaround time and providing globally consistent and accurate peak analysis using the latest in AI/machine learning. The new product will be announced at ASMS 2023 for subsequent release to GC/MS labs to begin using AI/machine learning to assist, automate, and accelerate their data analysis.
<blockquote>
Presenter: Anastasia A. Andrianova (GC/MS Application Scientist, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Anastasia Andrianova is a GC/MS Applications Scientist in the Mass Spectrometry Division of Agilent Technologies, located in Wilmington, Delaware. She received a Ph.D. in analytical chemistry from the University of North Dakota (Grand Forks) in 2017 and a combined masters’ and bachelor’s degree in analytical chemistry from the Moscow State University (Moscow, Russia) in 2014. Anastasia has been at Agilent Technologies since 2018. She has authored or co-authored over 30 journal articles and application notes, as well as 1 patent in the field of analytical chemistry, focusing on chromatography and mass spectrometry. Anastasia is currently working in GC/MS applications in multiple areas with a focus on food and environmental analysis.
</blockquote>
<blockquote>
Presenter: Thomas Bispham (Analytical AI/Machine Learning, Agilent Technologies, Inc.)
</blockquote>

Agilent Technologies: Revolutionize your GC/MS analysis with the power of hydrogen carrier gas and AI technology – Faster, More Reliable and Efficient Results Guaranteed!

Revolutionize your GC/MS analysis with the power of hydrogen carrier gas and AI technology – Faster, More Reliable and Efficient Results Guaranteed!

This presentation provides an overview of several successful hydrogen   implementations with New MassHunter with AI Peak Detection.

GC/MS analysis with the power of hydrogen carrier gas and AI

The food industry spends a lot of time and effort analyzing products for their flavors and off-flavors. This analysis is very important since we all like our products to consistently taste the same.
In the last few years, we have seen a tendency in the food market to go towards vegan products and lactose-free products. The composition of vegan food is mainly plant-based, but not all plants taste the same. For example, soy and lupine — in some people — cause a bitter aftertaste. Since our taste buds are all different, not every one tastes the same thing.
This is where off-flavors come in. Off-flavors are considered those that are “not tasty,” ranging from bitter to rancid. If you buy a strawberry yogurt, you may want it to taste the same whether it is dairy or plant-based. This is often not the case. For the food industry, consistency in taste is a very important factor, since they don`t want their products to sit on the shelf.
<blockquote>
Presenter: Petra Gerhards (Regional Marketing Manager EMEA GC &amp; GC-MS, Thermo Fisher Scientific)
</blockquote>
<blockquote>
Petra has more than 30 years of experience in the field of GC-MS, SPE and LC-MS and she joined the EMEA Regional Marketing Team in 2016. Petra has been involved in a lot of workflow solutions combining vials and closures with SPE solutions, GC-MS and LC-MS. She works with KOLs on data for regional specific marketing campaigns, organizes in-house seminars and works on customer specific solutions. She has deep knowledge in the field of doping and drugs of abuse analysis.
</blockquote>

Thermo Scientific: Orbitrap technology for off-flavor analysis in food

Orbitrap technology for off-flavor analysis in food

The food industry spends a lot of time and effort analyzing products for their flavors and off-flavors. This analysis is very important.

Webinars will cover the following Gas Chromatography topics:
<ul>
<li>6/27 - Vaporizers for LPG Samples</li>
<li>7/11 - Dynamic Blending for Linearity and LDL</li>
<li>7/18 - GC Valves: Purposes and Service</li>
<li>7/25 - Calibration Techniques for Accurate Data</li>
<li>8/1 - Sample Capture, Transport, and Introduction</li>
<li>8/8 - GC Detectors I: PDHID and SCD</li>
<li>8/15 - GC Autosamplers for Gas and LPG Samples</li>
<li>8/22 - GC Detectors II: The Strengths of Mass Spectrometry</li>
<li>8/29 - Methanizers for Trace CO &amp; CO2</li>
<li>9/5 - Training Program for GC Operators</li>
</ul>
<blockquote>
Presenter: John Wasson (President, Wasson-ECE Instrumentation, Inc.)
</blockquote>
<blockquote>
John Wasson has over 40 years of experience in Gas Chromatography and Chemical Instrumentation.
</blockquote>

Wasson-ECE Instrumentation: Free GC Webinar Series

Dynamic Blending for Linearity and LDL

GC Valves: Purposes and Service

Following up from our very successful previous sessions, we are delighted to offer another panel discussion in the ever popular “Ask the Agilent Experts” series.
Have you ever had a question about your GC/GCMS analysis and thought, “I have no idea what to do,” or that since the question seemed so simple, everyone must already know the answer and &quot;Am I the only one who doesn’t know what to do?” We can assure you that you are not alone.
If you have a question, we can guarantee that you are not the first...nor the last person to ask the question. Sometimes the simplest of questions can have the most complex answers. A question about which liner to use can lead to a discussion on the benefits of glass wool versus glass frits. A question about how long a column should last may trigger a discussion about the importance of a leak free system, the maximum temperature limit, proper phase selection, and how an application may benefit from using backflush. There’s no such thing as an easy answer because the answer always “depends” on many different factors. 
We will discuss some of the most frequently asked questions about GC and GCMS that we have received. Some may seem like simple questions, but they have anything but simple answers. Experts from Agilent as well as from the field will also answer new questions that we hope you will submit to us in advance.
<blockquote>
Presenter: Vanessa Abercrombie (MFS, GC Applications Chemist, Agilent Technologies)
</blockquote>
<blockquote>
Vanessa has a broad background in GC and GC/MS, including experience as an instrument chemist at Bode Technology in Virginia working under contract to the FBI’s Laboratory Division. Prior to that, Vanessa worked for ETS Labs in St. Helena, California as an Analytical Chemist where she researched and developed quantitative separations by GC/MS and UHPLC for beer, wine and spirits. She holds a Masters of Forensic Science from The George Washington University and a Bachelor of Arts in Chemistry from Sonoma State University.
</blockquote>
<blockquote>
Presenter: Samuel Haddad (Ph.D., Application Development Chemist, Agilent Technologies)
</blockquote>
<blockquote>
Samuel Haddad is a GC Application Development Chemist at Agilent Technologies in Wilmington, Delaware. Samuel specializes in GC and GCMS applications of trace analysis in environmental and heavy matrix samples. His specialty includes sample preparation techniques to separate analytes from matrix components and extraction from a wide variety of matrix including water, fish, aquatic life, soil, and complex fluids. Samuel holds a Ph.D. in Environmental Science from Baylor University and a B.S in Biology from Southern Illinois University Edwardsville.
</blockquote>
<blockquote>
Moderator: Diane Turner (Director &amp; Senior Consultant, Anthias Consulting Ltd)
</blockquote>
<blockquote>
A Warwick University graduate, Diane completed her masters in Analytical Chemistry and started her career in environmental chemistry, later gaining significant experience as an Applications Chemist. Diane’s area of research through her PhD studies at The Open University was disease diagnosis. She has developed methods and given support and training for companies in most industries around the world for more than 20 years. Diane holds voluntary roles with The Royal Society of Chemistry and other scientific organizations.
</blockquote>

Separation science: Ask the Agilent Experts - Part 4: GC and GC/MS Scientists Discuss & Answer Your Most Frequently Asked Questions

Ask the Agilent Experts - Part 4: GC and GC/MS Scientists Discuss & Answer Your Most Frequently Asked Questions

The most frequently asked questions about GC and GCMS that we have received.

Ask the Agilent Experts - Part 4: GC and GC/MS

Welcome to Thermo Fisher Scientific’s Powering Productivity in Food and Environmental Testing webinar series!
The global helium shortage continues to have a profound impact on the productivity of analytical testing labs that rely on helium as a carrier gas for their GC analyses.
In this webinar, hosted by Petra Gerhards, GC&amp;GC-MS experts Daniela Cavagnino and Adam Ladak will discuss the recurring shortage, the effect it is having on gas chromatography users, and solutions that Thermo Fisher Scientific can provide to help reduce the burden of increased cost and supply uncertainty in routine testing labs. The solutions covered include technologies for saving helium, as well as using hydrogen instead of helium- including data that validates the workflow for hydrogen usage.
<blockquote>
Presenter: Daniela Cavagnino (Product Marketing Manager, Thermo Fisher Scientific)
</blockquote>
<blockquote>
Dr. Daniela Cavagnino received a Master Degree in Chemistry at the University of Milan, Italy. She started her career in gas chromatography at Thermo Fisher Scientific spending several years in the R&amp;D laboratories working on GC technology innovation and more than 15 years in product and marketing management roles promoting GC/GCMS technology and applications.
</blockquote>
<blockquote>
Presenter: Adam Ladak (Global Product Marketing Manager, GC Quadrupole MS, Thermo Fisher Scientific)
</blockquote>
<blockquote>
Adam started his career working in a contracting testing lab analyzing sports supplements and horse feed for prohibited substances. Adam spent over 10 years working for a leading instrument manufacturer in various roles from an application specialist in the UK and the US to a global marketing role focus on food and environmental testing. Adam is passionate about utilizing our GC-MS instrumentation to meet customer needs and solve real-world problems.
</blockquote>

Thermo Scientific: Ask-the-experts on effective GC solutions to deal with the helium shortage

Ask-the-experts on effective GC solutions to deal with the helium shortage

Technologies for saving helium, as well as using hydrogen instead of helium- including data that validates the workflow for hydrogen usage.

Effective GC solutions to deal with the helium shortage

How about a 20 minute coffee break along with a bite of Empower? Here you go!
Empower custom fields and Excel in Empower LMS - not a conflict of interest?
Excel Compliance is designed as the solution for customers operating in a regulated environment to use excel spreadsheet with confidence. It provides full audit trail that is compliant to regulatory requirements for electronic records and signatures. 
<ul>
<li>Mitigate the compliance risk of traditional uncontrolled spreadsheets and documents
</li>
<li>Enhanced compliance features such as:
<ul>
<li>authorized access control
</li>
<li>automated version control
</li>
<li>document level and cell by cell audit trails
</li>
</ul>
</li>
<li>Centralize and secure laboratory spreadsheets and documents for use in a regulated environment
</li>
</ul>
<blockquote>
Presenter: Ralf Schröder (Informatics Product Marketing Europe·Waters GesmbH)
</blockquote>

Waters Corporation: Excel and Compliance in Empower LMS

Excel and Compliance in Empower LMS

Empower custom fields and Excel in Empower LMS

Does the supply or cost of Helium carrier gas concern you &amp; the profitability of your lab?
Are you looking to switch to a faster &amp; cost-effective alternative?
Learn more by joining us for the upcoming webinar, where we will discuss the possibilities to save on helium costs &amp; to switch away from helium as a carrier gas.
The webinar will focus on the advantages and disadvantages of switching to a different carrier gas, as well as the implications of the same. 
We will talk about an innovative addition to the Agilent portfolio that offers opportunities to equip GC-MS systems in such a way that working with hydrogen as a carrier gas will lead to better results than was ever possible before. 
Key learning objectives: 
<ul>
<li>What are the options to save on Helium carrier gas cost
</li>
<li>Learning the implications of moving away from Helium as a carrier gas
</li>
<li>Implementing alternatives for Helium carrier gas
</li>
</ul>
Who should attend: Everyone using Helium as a carrier gas for GC/GC-MS application and those who want to save on Helium costs or are forced to move away from Helium for varied reasons. 
<blockquote>
Presenter: Dr. Anshu Kumari Singh (Technical Support Manager, Agilent Technologies)
</blockquote>
<blockquote>
Dr. Anshu Kumari Singh is the Technical Support Manager for India in the Chemistries and Supplies Division. She has more than 20 years of experience in this industry. She is leading a team of highly qualified Individuals responsible for providing technical support to customers. She provides support to customers on queries related to applications, products and troubleshooting for GC and LC columns and Supplies. She also conducts workshops, trainings and seminars for the customers helping them in understanding the chemistry behind GC &amp; HPLC columns and Sample Preparation Products. Dr. Anshu holds a Doctorate degree from Indian Agricultural Research Institute, New Delhi and is based out of Delhi.
</blockquote>
<blockquote>
Presenter: Praveen Arya (Application Engineer - GCMS, Agilent Technologies
</blockquote>
Praveen Arya, Application Engineer at Agilent technologies, has a commitment and appreciation for Gas-phase residue applications. In 2005, Mr. Praveen Arya completed his MSc. in Food Technology . After post-graduation, he served as a Senior Analyst at SGS, Gurgaon- a commercial testing laboratory for 6 years and developed expertise in Residue analysis using sophisticated chromatographic instruments such as LCMS and GCMS. After that, in 2011, He joined Agilent Technologies as an Application Engineer where he supported country-wide GCMS customers for resolving application issues and method development. He has more than 18 years of experience in residue analysis in food and environmental samples using various high end chromatographic and spectrometric techniques (GC, GCMS, GCMS/MS, TDS, Headspace, Purge &amp; trap etc.). His area of specialization includes new analytical method development and validation as per national and international guidelines.

Agilent Technologies: The Helium to Hydrogen Switch

The Helium to Hydrogen Switch

We will discuss the possibilities to save on helium costs & to switch away from helium as a carrier gas.