Interlaboratory comparisons (ILCs) have been used for more than a century and many important concepts are linked to them. This leaflet addresses the basic terminology of ILCs, why some colloquial terms can be misleading or misunderstood, and the importance of harmonisation.&nbsp;An ‘ILC’ is the organisation, performance and evaluation of measurements or tests on the same or similar items by two or more laboratories in accordance with predetermined conditions [1]. ILCs have a variety of overall – and detailed – objectives, the three most common [2] being:<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Let_s_call_a_PT_scheme_a_PT_scheme_3_9993b9fb0f.jpg" alt="Eurachem: Let’s call a PT scheme a PT scheme" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Let_s_call_a_PT_scheme_a_PT_scheme_3_9993b9fb0f.jpg 245w," sizes="100vw" width="1516" height="472"><h4>Some comparisons have special names&nbsp;</h4>The evaluation of participant (laboratory, organisation or individual) performance is typically referred to as ‘proficiency testing’ (PT) or ‘external quality assessment’ [1]. When the main objective is evaluating the performance of, for example, a candidate standard method, the ILC is often called a ‘method performance study’ or a ‘collaborative study’ [2, 3]. The former is quite clear whereas wording such as “collaborative” and “cooperative” just stresses joint effort. A project aimed at producing a new certified reference material may involve several laboratories conducting analyses on agreed properties [4]. Not surprisingly, this work is sometimes labelled as a ‘material certification study’. Special ILCs used to demonstrate measurement capabilities of National Metrology Institutes are called ‘key comparisons’, ‘supplementary comparisons’, and ‘pilot studies’ [5].&nbsp;<h4>Some terms can be confusing&nbsp;</h4>Other terms for ILCs, including ‘ring test’, ‘round robin’ and ‘circle analysis’, are common in the literature. They have, however, been used for different objectives and different designs and may be ambiguous or understood differently by laboratory staff. The use of these terms may, for example, imply a specific way of distributing the ILC sample. ISO/IEC 17043 uses ‘sequential scheme’, for a PT where a unique item is transferred between the participants and ‘simultaneous scheme’, in which similar items from a batch are distributed simultaneously to the participants [1].&nbsp;Terms like ‘measurement audit’, ‘interlaboratory testing scheme’, ‘measurement comparison scheme’, ‘rapid performance evaluation scheme’ and ‘intercalibration’ may not correctly reflect the category of laboratory involved, or the type of work participants do during the ILC.&nbsp;When in 1994 the IUPAC defined and described three major types of ‘interlaboratory studies’, the word ‘study’ was preferred to synonyms such as ‘trial’, ‘exercise’, ‘test’, ‘evaluation’ or ‘check’ [2].<h4>Let’s try to harmonise&nbsp;</h4>Many laboratory staff are unaware of official terms related to ILCs but recognise the acronym PT and words like ‘ring test’. Ideally, we would use a common scientific language, but harmonisation is time consuming. Terms appear and disappear and definitions change. The same term can be defined differently, even in different international standards. Lack of standards and guidelines in local languages can cause confusion and contribute to spreading of less appropriate terms.&nbsp;<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Let_s_call_a_PT_scheme_a_PT_scheme_2_820043ce8b.jpg" alt="Eurachem: Let’s call a PT scheme a PT scheme" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Let_s_call_a_PT_scheme_a_PT_scheme_2_820043ce8b.jpg 234w," sizes="100vw" width="1006" height="671">Much confusion can be avoided by clear reference to relevant standards and sectoral guides. ISO/ IEC 17043 [1] and ISO 13528 [6] contain many important concepts related to PT schemes and other ILCs. Some of these are also incorporated into ISO/IEC 17025 [7]. Additional useful, and free, tools are the Eurachem PT Guide [8] and the ISO online browsing platform [9].&nbsp;In writing guidance and instructions, remember that the term ‘interlaboratory comparison’ has a broad meaning and can be used for all cases described above. Sometimes this is clear enough for the reader. In other cases, use acknowledged terms that reflect the detailed objective of the ILC. Let’s call a PT scheme a PT scheme!

Let’s call a PT scheme a PT scheme!

The countdown is on for one of the world’s leading conferences dedicated to food analysis. The 12th International Symposium on Recent Advances in Food Analysis (RAFA 2026), taking place in Prague from 3–6 November 2026, is approaching two important milestones: the Early Bird registration deadline and the deadline for oral abstract submissions, both ending on 30 June 2026. Researchers, analysts, industry professionals, regulators, and students are encouraged to secure their participation at a reduced registration rate and take advantage of the opportunity to present their latest scientific results to the international food analysis community.RAFA 2026 will once again bring together leading experts from academia, industry, and regulatory organizations to discuss the latest developments in food safety, authenticity, contaminants, non-target screening, PFAS, microplastics, food contact materials, artificial intelligence, and advanced analytical technologies. The preliminary program already features an outstanding lineup of internationally recognized speakers addressing some of the most pressing challenges in modern food analysis and food safety.<h3>Registration</h3><blockquote>👉<a target="_blank" rel="noopener noreferrer" href="https://rafa.easyevent.eu/tickets/">Register to attend RAFA 2026!</a>Early-bird registration until 30 June, 2026</blockquote>After successful submission of your registration, you will receive by e-mail (i) an automatic confirmation of receipt indicating the total amount of payment due (either for bank transfer or for on-line payment by card), (ii) login to Member section where you can administrate your profile, submit your abstracts, and from September 2026 register for satellite events, workshops and seminars. If it will not be delivered within a few minutes after submission of your registration please contact us at RAFA2026@vscht.cz.As soon as payment of registration fee is processed, you will also receive by e-mail (iii) confirmation of payment.<h4>Registration Fees</h4><ul><li>Smart rate (Until 30 June, 2026): € 655</li><li>Regular registration (Until 30 September, 2026): € 855</li><li>Late registration (From 1 October, 2026): € 955</li><li>Student rate*&nbsp;<ul><li>Until 30 June, 2026: € 465</li><li>From 1 July, 2026: € 605</li></ul></li></ul>* The proof of student status (e.g. copy of a student identify card) is requested as an attachment of the registration form.<h5>The regular registration fee will include:</h5><ul><li>Attendance at all scientific sessions, workshops, seminars, vendor seminars and other satellite events</li><li>Access to the poster and exhibition area</li><li>Conference kit (name badge, conference bag, conference documents, certificate of participation, certificate of presentation on request)</li><li>Final programme</li><li>E-Book of Abstracts</li><li>Coffee breaks</li><li>Buffet luncheons</li><li>Welcome drink</li></ul>In the registration form you can register free of charge for the welcome drink and you can also order ticket(s) for the conference dinner (€ 85).Please note that your registration is firm when your payment has been received.<h3>Abstract submission</h3><blockquote>👉<a target="_blank" rel="noopener noreferrer" href="https://rafa.easyevent.eu/tickets/">Submit your ABSTRACT HERE!</a>In order to submit an abstract, you must first register to attend RAFA 2026. After registration you will receive an access to the Member section where you can submit your abstract(s).</blockquote>&nbsp;After successful submission of your abstract you will receive an automatic confirmation of receipt of submitted abstract via e-mail. If it will not be delivered within a few minutes after submission of your abstract please check at first your spam box-mail and then contact us at RAFA2026@vscht.cz.Please ensure that your abstract does not contain spelling, grammatical or scientific errors. Even though modifications of your submitted abstract will be allowed in the Abstract section of the Member section until the deadline for the abstract submission, please be confident on the lack of errors in your final version prior to starting the submission process.The abstract will be reproduced exactly as submitted. No proofreading will be done, although some corrections may be requested by the reviewers.If you need to withdraw your abstract, a written statement reflecting the reasons for this decision must be sent to RAFA2026@vscht.cz no later than September 30, 2026.<h4>Important notice:</h4><blockquote>1 registered participant can submit no more than 2 abstracts.</blockquote>To apply for a young scientist’s oral presentation, as an indication please respect the rule that you should be born in 1991 or later.The text of the abstract should be limited to 3000 characters including spaces. Tables and pictures are not allowed.Abstracts of oral presentations and posters will be included into the "e-Book of Abstracts" only after receipt of the conference registration fee. Any payment of the registration fee has to be received until September 30, 2026, otherwise contribution(s) will not be included into the e-Book of Abstracts and the Conference programme.<h3>Program</h3><h4>Invited Speakers</h4><h5>Food allergen risk assessment: Past, present, future</h5><ul><li>Ben Remington from Remington Consulting Group B.V., Utrecht, the Netherlands &amp; University of Nebraska, USA</li></ul>Food allergy and allergen management are global public health issues, and consumer protection depends on transparent and trustworthy labelling. While 30 years of scientific advances show that low level exposures, or reference doses, are unlikely to trigger reactions in most allergic individuals, harmonized and globally aligned regulations are still needed to promote consistent allergen risk assessment and labelling decisions. This presentation will discuss the landscape of allergen risk assessment, global policy developments, current research and future needs in the area.<h5>Unmasking hidden adulteration in honey: Strategies for detecting and characterizing honeys produced from sugar-fed colonies</h5><ul><li>Oscar Nuñez Burcio from University of Barcelona, Barcelona, Spain</li></ul>From hive to jar, not all honey tells the same story. This presentation addresses hidden adulteration associated with sugar-fed bee colonies, highlighting implications for authenticity, production practices, and the need for a more precise characterization of honey to ensure consumer trust.<h5>Analytical and toxicological methods for safety of food contact materials</h5><ul><li>Erich Leitner from Graz University of Technology, Institute of Analytical Chemistry and Food Chemistry, Graz, Austria</li></ul>Food packaging plays a critical role in protecting and preserving food throughout the supply chain. All packaging materials intended to come into contact with food must comply with strict EU safety rules. Due to increased complexity of packaging solutions, lowering legal limits and increasing numbers of target compounds, we also have to adapt the strategies used to verify and guarantee the safety of these materials.<h5>Data-driven strategies to reduce complexity in non-target HRMS analysis of food samples</h5><ul><li>Anneli Kruve from Stockholm University, Stockholm, Sweden</li></ul>LC/HRMS based non-target screening can detect hundreds to thousands of chemical features in complex food and environmental samples. Investigating all of these in detail is practically impossible, so which ones to focus on? Novel computational tools developed in computational mass spectrometry allow predicting the toxicity and concentration of the detected chemical features even if these have not yet been fully structurally elucidated. Combining these predictions enables us to focus on the chemical features possessing high risk.<h5>Role of AI in the identification of emerging food systems risks</h5><ul><li>Ákos Bernard Jóźwiak from Syreon Research Institute, Budapest, Hungary</li></ul>AI-assisted evidence synthesis – spanning curated scientific evidence, exposome data, and network analysis – is the backbone of next-generation emerging chemical food safety risk identification, enabling earlier signals and more resilient surveillance systems.<h5>Challenges of microplastics analysis in the context of food safety</h5><ul><li>Dorte Herzke from Norwegian Institute of Public Health, Oslo, Norway</li></ul>Food and food packaging are major sources of micro- and nanoplastic exposure. Plastics used in processing, storage, and packaging can release particles through heat, abrasion, and degradation. Small particles below 2 µm may cross gut barriers and carry chemicals, highlighting the need for robust and sensitive measurement methods.<h5>Never-ending analytical challenges in PFAS analysis of food</h5><ul><li>Darina Dvořáková from University of Chemistry and Technology Prague, Prague, Czechia</li></ul>Exploring and monitoring PFAS in food requires advanced strategies. Combining targeted, suspect, and non-target HRMS analysis, determination of total fluorine and sum parameters, and novel sensors provides new insights into PFAS occurrence and supports food safety monitoring.<h5>An overview of the latest scientific knowledge on process contaminants in food for appropriate risk management measures</h5><ul><li>Thierry Delatour from Nestlé Research, Lausanne, Switzerland.</li></ul>Recent scientific findings related to acrylamide and furans formation, occurrence and analytical methods in food provide important insights for risk management.

Deadline for RAFA 2026 Early Registration and Oral Abstract Submission is approaching

Traditional EI library searching works exceptionally well when the unknown compound is already present in the spectral library. However, analytical chemists frequently encounter compounds that are structurally related to library entries but are not exact matches. NIST's EI Hybrid Search addresses this challenge by combining conventional spectral matching with mass-shifted fragment alignment, allowing the identification of analogs, derivatives, and novel compounds that may not exist in the database.This guide summarizes the workflow presented by James Little and demonstrates how to use NIST 26 Hybrid Search in conjunction with the Chromatogram Window and MS Interpreter to obtain more meaningful structural information from unknown EI GC-MS spectra.<blockquote><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/paper/33370">You can download PDF Handout for this guide HERE</a></blockquote><h4>Why Hybrid Search Matters</h4>Conventional EI library searching relies on direct matching between an unknown spectrum and spectra stored in a library. Hybrid Search expands this concept by allowing fragment ions to be matched even when they are shifted by a consistent mass difference (Δm). This enables the software to recognize compounds that differ by substituents or structural modifications.Key advantages include:<ul><li>Identification of structurally related compounds not present in the library</li><li>Detection of analogs, derivatives, and emerging compounds</li><li>Integration of exact fragment matches and mass-shifted matches into a single score</li><li>Improved interpretation of unknowns through proposed structural modifications</li><li>Enhanced confidence when molecular weight information is available</li></ul>Although Hybrid Search does not require the molecular ion to be present, performance improves significantly when the molecular weight can be estimated or constrained. In these cases, the observed mass difference between the unknown and library compounds can often be translated directly into a plausible chemical modification.<h4>Configuring Hybrid Search</h4>Before performing a search, the Hybrid Search settings should be configured within the NIST Library Search window.Recommended settings:<ul><li>Select the Similarity search mode</li><li>Enable Hybrid Search</li><li>Keep the In Spectrum option checked under normal circumstances</li><li>Allow the software to estimate the molecular weight automatically</li><li>If the estimated molecular weight appears incorrect, manually enter a nominal molecular weight</li><li>Select all relevant libraries (NIST, Wiley, user libraries, etc.)</li><li>Save the configuration for future use</li></ul>The selected molecular weight used to constrain the search is displayed in the lower-right corner after the search is completed.<h4>Optimizing the Results Display</h4>Hybrid Search produces several unique parameters that are not shown in the default results table.Additional columns should be added by right-clicking within the results table and selecting Properties. Recommended columns include:<ul><li>DeltaMass</li><li>dForm</li><li>pctRelForm</li><li>o.Match (equivalent to the traditional EI Normal Match score)</li></ul>Without these parameters, much of the structural interpretation power of Hybrid Search is lost.<h4>Working with Spectra from the Chromatogram Window</h4>Currently, the Chromatogram Window performs standard EI library searching. When a potentially interesting unknown is encountered:<ul><li>Perform the normal EI search in the Chromatogram Window</li><li>Send the spectrum to the standalone Library Search module</li><li>Perform a Hybrid Search using the enhanced Hybrid Search functionality</li></ul>This workflow combines rapid screening with advanced structural interpretation.<h4>Understanding Key Hybrid Search Parameters</h4><h5>DeltaMass (Δm)</h5>DeltaMass represents the mass difference between the unknown compound and the matched library compound.A consistent Δm across multiple high-scoring hits often indicates a specific structural modification.<h5>dForm</h5>dForm provides a proposed elemental composition that explains the observed mass difference.Examples include:<ul><li>H–1F</li><li>CH₂</li><li>O–1</li><li>C₁H₃F</li></ul>These transformations can suggest likely chemical modifications between the library compound and the unknown.<h5>pctRelForm</h5>New in NIST 26, pctRelForm estimates how frequently a given elemental transformation occurs relative to the most common transformation (CH₂ = 100%).Interpretation:<ul><li>High values indicate chemically plausible and commonly observed transformations</li><li>Very low values suggest the proposed transformation may be accidental or unlikely</li></ul><h5>o.Match</h5>Represents the traditional EI match score and allows comparison between standard searching and Hybrid Search results.<h4>Case Study: Identifying a Fluorinated Unknown</h4>The presentation demonstrates the identification of an unknown compound with a proposed molecular weight of 152 Da.Hybrid Search returned several high-scoring hits with consistent evidence suggesting fluorine substitution:Hit #1<ul><li>Library MW: 134</li><li>DeltaMass: +18</li><li>dForm: H–1F</li><li>Interpretation: Addition of fluorine</li></ul>Hit #5<ul><li>Library MW: 138</li><li>DeltaMass: +14</li><li>dForm: CH₂</li><li>Interpretation: Related fluorinated analog</li></ul>Hit #6<ul><li>Library MW: 168</li><li>DeltaMass: –16</li><li>dForm: O–1</li><li>Interpretation: Structurally consistent fluorinated compound</li></ul>Multiple independent hits converged on the same conclusion: the unknown was likely a fluorinated analog of known aromatic compounds.This illustrates the major strength of Hybrid Search: identifying structural relationships even when the exact compound is absent from the library.<h4>Moving from Hybrid Search to Structural Interpretation</h4>Once a plausible structure is identified:<h5>Step 1 – Export the Structure</h5>From the Hybrid Search results:<ul><li>Right-click the best hit</li><li>Use Send To → Default Structure Editor</li><li>Open the structure in a drawing program such as ChemSketch</li><li>Copy the proposed structure to the clipboard</li></ul><h5>Step 2 – Open MS Interpreter</h5>Within MS Interpreter:<ul><li>Paste the proposed structure</li><li>Load the unknown spectrum</li><li>Compare predicted fragmentation with observed ions</li><li>Evaluate isotope patterns and fragment assignments</li></ul><h5>Step 3 – Validate the Proposal</h5>Indicators of a good structural proposal include:<ul><li>Consistent isotope ratios</li><li>Logical fragmentation pathways</li><li>Agreement between observed and predicted fragment ions</li><li>Multiple Hybrid Search hits supporting the same structural modification</li></ul>In the example presented, MS Interpreter showed excellent agreement between the proposed fluorinated structure and the observed EI spectrum, although the exact positions of the fluorine and methyl substituents on the aromatic ring could not be definitively assigned.<h4>Best Practices</h4><ul><li>Always review DeltaMass, dForm, and pctRelForm together</li><li>Do not rely solely on the highest match score</li><li>Give greater weight to transformations supported by multiple independent hits</li><li>Use molecular weight information whenever possible</li><li>Confirm structural hypotheses using MS Interpreter</li><li>Consider Hybrid Search as a structure-elucidation tool rather than simply a library search tool</li></ul><h4>Conclusion</h4>NIST 26 Hybrid Search significantly extends the capabilities of conventional EI library searching by identifying structural relationships between unknown compounds and library entries. Through the use of DeltaMass calculations, elemental transformation analysis (dForm), and statistical plausibility metrics (pctRelForm), Hybrid Search provides valuable clues for elucidating compounds that are absent from spectral libraries.When combined with MS Interpreter, it becomes a powerful workflow for the characterization of unknowns, analogs, degradation products, metabolites, and emerging compounds in EI GC-MS analysis.

Lib Search: Similarity EI Hybrid Search for Spectra Sent from Chromatogram Window

Article

Events

Academy

Video

Software

RAFA provides an overview of contemporary trends in ANALYTICAL & BIOANALYTICAL STRATEGIES IN FOOD QUALITY AND SAFETY CONTROL and discusses CHALLENGES / NOVEL APPROACHES IN FOOD AND NATURAL PRODUCTS ANALYSIS.

Recent Advances in Food Analysis (RAFA)

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

My main interest is the identification of organic compounds by mass spectrometry in organic mixtures.

James Little/Mass Spec Interpretation Services

Organomation NiGen GC/HC Nitrogen Generator

The NiGen GC/HC is available in both a basic and HC version which completely removes hydrocarbons using a Pt/Pd catalyzer. 

The NiGen GC/HC is available in both a basic and HC version which completely removes hydrocarbons using a Pt/Pd catalyzer. It is capable of distributing 500 mL/min with greater than 99.9995% purity. It's designed to be connected to a dedicated AirComp compressor (can be purchased separately).&nbsp;Parallel connection allows for up to 4 generators to be stacked in a tower configuration. It features a CPU with touch screen display, which can be linked to a generator using CAN-BUS. This enables monitoring of the operating status and provides access to the maintenance menu, alarm reports, and functional parameters. It is capable of supporting up to 12 FIDs or NPDs with makeup gas or up to 7 ECDs.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_Ni_Gen_GC_modular_configuration_75ae60afb0.jpg" alt="Organomation: NiGen GC - Modular configuration" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_Ni_Gen_GC_modular_configuration_75ae60afb0.jpg 147w," sizes="100vw" width="727" height="768"><h4>Standard features</h4><ul><li>Modular configuration</li><li>Capacity to supply up to 12 FIDs/NPDs with makeup gas, or up to 7 ECDs or 5 S/S</li><li>Easy, "plug and play" integration with the dedicated Brezza series air compressor AirComp</li><li>Included Fast Start technology guarantees UHP after only 30 minutes</li><li>HC model includes Pt/Pd to remove up to .1ppm of THC</li><li>CPU with Touch Screen Display (connectable with CAN BUS) allows you to monitor the operational status</li><li>CPU also has an Ethernet output for PC connection&nbsp;</li></ul><h4>Specification</h4>Key Features:<ul><li>Flow Rate: 500 mL/min</li><li>Output Pressure: 0 – 87 PSI (0 – 6 bar)</li><li>Purity: &gt; 99.9995%</li><li>Total Hydrocarbons: &lt; 0.1 ppm (HC model only)</li></ul>Air Input Requirements:<ul><li>Particulates: ≤ 0.01 mm</li><li>Oil Vapors: ≤ 0.01 mg/m³</li><li>Moisture: ≤ 3 °C dew point (ATP)</li><li>Minimum Pressure: 8 bar</li><li>Flow Rate: 6 L/min</li></ul>Electrical Requirements:<ul><li>NiGen GC: 115/230 V ±10%, 50–60 Hz, 50 W</li><li>NiGen GC HC:<ul><li>115 V ±10%, 60 Hz, 200 W</li><li>230 V ±10%, 50 Hz, 200 W</li></ul></li></ul>Additional Specifications:<ul><li>Protection Index: IP20</li><li>Noise Level:<ul><li>&lt; 50 dBA for 98% of operation</li><li>&lt; 60 dBA briefly during cycling</li></ul></li><li>Operating Temperature: 40 °F to 100 °F (5 °C to 40 °C)</li><li>Environmental Humidity: Max 90% (non-condensing)</li><li>Maximum Altitude: 2000 m (6561.68 ft)</li></ul>Dimensions &amp; Weight:<ul><li>GC Model:<ul><li>Height: 15.8" (40 cm)</li><li>Weight: 63 lbs (28 kg)</li></ul></li><li>GC HC Model:<ul><li>Height: 18.6" (47 cm)</li><li>Weight: 70.5 lbs (32 kg)</li></ul></li><li>Width: 14.9" (38 cm)</li><li>Depth: 20.8" (53 cm)</li></ul>Pneumatic Connections:<ul><li>Compressed Air Inlet: G 1/8” female</li><li>Nitrogen Outlet: G 1/8” female</li></ul>Warranty: 2 years<h4>Accessories</h4><ul><li>AirComp oil free compressor</li><li>CPU: User interface with touch screen display Brezza version</li><li>Installation kit</li><li>Maintenance kit for 8,000 or 16,000 running hours</li></ul>

Organomation NITRO-GEN Nitrogen Generator

The NITRO-GEN generator was developed with Organomation’s nitrogen evaporators in mind to provide nitrogen generation for sample concentration.

The NITRO-GEN generator was developed with Organomation’s nitrogen evaporators in mind to provide nitrogen generation for sample concentration. The generator is lightweight and easy to set up, requiring only a source of compressed air to run. This unit is an ideal choice for labs with an in-house compressed air source.The generator uses a hollow-fiber membrane to convert compressed air to a stream of 95-99% pure nitrogen gas. The hollow-fiber membrane consists of a series of narrow, semipermeable tubes in a porous membrane. As compressed air travels through the fibers, oxygen and water vapor permeate the membrane and are vented off, leaving a steam of high purity nitrogen gas. At up to 99% purity, the resulting nitrogen gas stream can be used in a variety of sample preparation applications.<h4>NITRO-GEN</h4>The NITRO-GEN produces up to 20 L/min of nitrogen gas and is recommended for evaporation of up to 48 sample positions.&nbsp;<h4>Standard features</h4><ul><li>Adjustable outlet pressure regulator, 0-100 psi</li><li>Dual Stage clean air filtration system</li><li>Requires an oil-less compressed air source</li></ul><h4>Advantages</h4><ul><li>Quick Start-Up Time - Nitrogen is produced instantly, no heat up time</li><li>Saves Energy - No electrical power needed</li><li>Engineered Design - Life expectancy is more than 10 years</li><li>Low Maintenance - Serviceable clean air filter</li><li>Compact and Lightweight - Small footprint conserves valuable bench space</li><li>Reduced CO2 Emissions - No heaters, less energy required</li></ul><h4>Specification</h4><h5>Key Features:</h5><ul><li>Flow Rate: Up to 20 L/min</li><li>Technology: Hollow-fiber membrane</li><li>Output Pressure: Adjustable 0 – 100 PSI</li><li>Electrical Requirements: None (no power required)</li><li>Noise Level: &lt; 40 dBA (virtually silent when connected to an instrument)</li></ul><h5>Inlet Air Requirements:</h5><ul><li>Maximum Inlet Pressure: 150 PSI (10.3 bar)</li><li>Particulate Filtration: ≤ 0.01 µm</li><li>Oil Vapor Content: &lt; 0.01 mg/m³ (&lt; 0.01 ppm)</li><li>Relative Humidity: &lt; 100% (non-condensing)</li><li>Air Quality: Clean, contaminant-free air</li></ul><h5>Environmental Conditions:</h5><ul><li>Operating Temperature: 36–122 °F (2–50 °C)</li><li>Ambient Pressure: Atmospheric</li></ul><h5>Dimensions &amp; Weight:</h5><ul><li>Size (W × D × H): 9.5 × 8 × 19.5 in (241 × 203 × 495 mm)</li><li>Weight: 13.25 lbs (6 kg)</li></ul>Warranty: 1 year

Organomation H Series Hydrogen Generator

The H Series Hydrogen Generator delivers up to 600 mL/min hydrogen with 99.9999% purity, advanced safety features, and scalable modular design.

The Organomation H Series Hydrogen Generator is a modular hydrogen generation system designed for GC, GC-MS (GC-MSD), and FAST GC applications. It is available in three models with flow rates of 200, 400, and 600 mL/min, delivering ultra-high purity hydrogen up to 99.9999%.The system uses HT PEM electrolytic cell technology, producing hydrogen on demand, minimizing internal gas storage and enhancing safety.A comprehensive safety system includes acoustic alarms, display messages, and automatic shutdown in case of gas leaks, with automatic switching to inert gas if hydrogen production stops.The generator features a touchscreen CPU, supports CAN-BUS and LAN connectivity, and allows real-time monitoring, diagnostics, and maintenance management. Up to four units can be connected in parallel for scalable performance.<h4>Key Features</h4><ul><li>Three models: 200 / 400 / 600 mL/min</li><li>Hydrogen purity up to 99.9999% (UHP)</li><li>HT PEM electrolytic cell technology</li><li>On-demand hydrogen production</li><li>Advanced safety system with alarms and auto shutdown</li><li>Automatic switch to inert gas</li><li>Removable water tank for easy maintenance</li><li>Low maintenance and low operating cost</li><li>Parallel connection of up to 4 units</li><li>Touchscreen CPU with CAN-BUS and LAN</li><li>Full monitoring of system status and alarms</li></ul><h4>Available Models</h4><h5>H Series 200</h5><ul><li>Flow rate: 200 mL/min ±10%</li><li>Power consumption: 110 W</li></ul><h5>H Series 400</h5><ul><li>Flow rate: 400 mL/min ±10%</li><li>Power consumption: 180 W</li></ul><h5>H Series 600</h5><ul><li>Flow rate: 600 mL/min ±10%</li><li>Power consumption: 250 W</li></ul><h4>Standard Features</h4><ul><li>HT PEM electrolytic cell</li><li>Touchscreen CPU</li><li>LAN connectivity</li><li>CAN-BUS communication</li><li>Removable water tank</li><li>Automatic water refill pump</li><li>Safety system with alarms and auto shutdown</li><li>Automatic inert gas switching</li><li>Modular stackable configuration</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Technology: HT PEM electrolytic cell</li><li>Purity: 99.9999%</li><li>Oxygen: &lt; 1 ppm</li><li>Dew point: &lt; -70°C</li><li>Output pressure: 2–8 bar (30–116 psi)</li><li>Max altitude: 2000 m</li><li>Noise: &lt; 50 dBA</li><li>Protection class: IP20</li></ul><h4>Electrical</h4><ul><li>115/230 V, 50–60 Hz</li><li>H200: 110 W</li><li>H400: 180 W</li><li>H600: 250 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–35 °C</li><li>Humidity: max 90% non-condensing</li></ul><h4>Water Requirements</h4><ul><li>Minimum resistivity: &gt;1 MΩ·cm (ASTM II)</li><li>Recommended: &lt;10 MΩ·cm (ASTM I)</li></ul><h4>Dimensions &amp; Weight</h4><ul><li>Dimensions: 47 × 38 × 53 cm</li><li>Weight: 30 kg</li></ul><h4>Connections</h4><ul><li>Hydrogen output: G 1/8" female (AISI 316)</li><li>Exhaust: 4 mm quick connector</li><li>Water input: 1/4" connection</li></ul><h4>Warranty</h4><ul><li>2 years</li></ul><h4>Accessories</h4><ul><li>Water demineralizer</li><li>Maintenance kit (9,000 / 18,000 hours)</li><li>Water refill pump</li></ul>

Organomation HG 2200 R Hydrogen Generator

The Organomation HG 2200 R delivers up to 200 mL/min hydrogen with >99.999% purity, low noise, and easy maintenance for THC analyzers.

The Organomation HG 2200 R is a compact hydrogen generator designed for THC and emission monitoring analyzers. It delivers flow rates up to 200 mL/min with hydrogen purity greater than 99.999%, and oxygen content below 0.1 ppm when used with additional purifiers.The unit allows adjustable outlet pressure from 1 to 4 bar (up to 6 bar on demand) and features a removable external water tank for easy maintenance. An automatic water loading pump supports continuous operation.<h4>Key Features</h4><ul><li>Hydrogen flow up to 200 mL/min</li><li>Purity &gt;99.999% (UHP)</li><li>O₂ &lt;0.1 ppm with additional purifier</li><li>Adjustable outlet pressure: 1–4 bar (up to 6 bar)</li><li>Removable water tank for easy cleaning</li><li>Optional continuous water supply (pump)</li><li>Low noise level &lt;46 dB</li><li>Compact benchtop design</li><li>Simple operation and maintenance</li></ul><h4>Standard Features</h4><ul><li>UHP hydrogen generation (&gt;99.999%)</li><li>Pressure control via keyboard</li><li>Removable water tank</li><li>External water supply capability</li><li>Integrated dryer with molecular sieve</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Model: HG 2200 R</li><li>Flow rate: 200 mL/min</li><li>Purity: &gt;99.999%</li><li>Oxygen content: &lt;0.1 ppm (with purifier)</li></ul><h4>Output Pressure</h4><ul><li>Standard: 1–4 bar</li><li>Maximum: 6 bar (on request)</li></ul><h4>Electrical</h4><ul><li>115/230 V, 50–60 Hz</li><li>Power rating: 100 VA</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li><li>Noise level: &lt;46 dB</li></ul><h4>Water Requirements</h4><ul><li>Demineralized water ≤ 5 µS/cm (~0.2 MΩ·cm)</li></ul><h4>Consumables</h4><ul><li>Dryer with molecular sieve</li></ul><h4>Dimensions &amp; Weight</h4><ul><li>Dimensions: 31 × 48 × 38 cm</li><li>Weight: 20 kg</li></ul><h4>Warranty</h4><ul><li>1 year</li></ul><h4>Accessories / Options</h4><ul><li>Additional purifiers for ultra-low O₂</li><li>Water refill pump</li></ul>

Organomation NiGen Micro Nitrogen Generator

The Organomation NiGen Micro delivers up to 4 L/min nitrogen with 99.5% purity, PSA technology, and scalable modular configuration.

The Organomation NiGen Micro is a compact nitrogen generator based on PSA (Pressure Swing Adsorption) technology, designed for laboratory applications requiring a stable nitrogen supply up to 4 L/min with purity up to 99.5%.The system is designed for plug &amp; play integration with the AirComp oil-free compressor (Brezza series) and supports parallel connection of up to four units for increased capacity.It features a CPU with touchscreen display, with CAN-BUS and Ethernet connectivity, enabling real-time monitoring, diagnostics, alarm reporting, and maintenance control.<h4>Key Features</h4><ul><li>Nitrogen flow up to 4 L/min</li><li>Purity up to 99.5%</li><li>PSA technology with Fast Purity process</li><li>Rapid high-purity nitrogen generation</li><li>Plug &amp; play integration with AirComp compressor</li><li>Parallel connection of up to 4 units</li><li>Touchscreen CPU with CAN-BUS communication</li><li>Ethernet connection for PC integration</li><li>Low noise operation (&lt;50 dBA)</li><li>Compact modular design</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator (Claind Fast Purity technology)</li><li>Touchscreen CPU</li><li>CAN-BUS communication</li><li>Ethernet interface</li><li>Modular stackable configuration</li><li>Compatibility with AirComp compressor</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Model: NiGen Micro</li><li>Flow rate: 4 L/min</li><li>Purity: up to 99.5%</li><li>Technology: PSA (Pressure Swing Adsorption)</li></ul><h4>Output Parameters</h4><ul><li>Pressure: 0–6 bar (0–87 psi)</li><li>Dew point: &lt; -50 °C (±2 °C)</li></ul><h4>Air Input Requirements</h4><ul><li>Particles: ≤ 0.01 µm</li><li>Oil vapors: ≤ 0.01 mg/m³</li><li>Moisture: ≤ 3 °C dew point</li><li>Minimum pressure: 8 bar</li><li>Minimum flow: 18 L/min</li></ul><h4>Electrical</h4><ul><li>115/230 V, 50–60 Hz</li><li>Power consumption: 50 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–35 °C</li><li>Humidity: max 90% non-condensing</li><li>Max altitude: 2000 m</li></ul><h4>Noise</h4><ul><li>&lt;50 dBA (98% of operation)</li><li>&lt;60 dBA (short peaks)</li></ul><h4>Dimensions &amp; Weight</h4><ul><li>Dimensions: 47 × 38 × 53 cm</li><li>Weight: 28 kg</li></ul><h4>Connections</h4><ul><li>Compressed air inlet: G 1/8" female</li><li>Nitrogen outlet: G 1/8" female</li></ul><h4>Warranty</h4><ul><li>2 years</li></ul><h4>Accessories</h4><ul><li>AirComp oil-free compressor (Brezza series)</li><li>CPU interface (Brezza version)</li><li>Installation kit</li><li>Maintenance kit (8,000 / 16,000 hours)</li></ul>

Organomation NITRO Nitrogen Generator

The Organomation NITRO 35/70 delivers up to 70 L/min nitrogen with 99.99% purity, PSA technology, remote monitoring, and integrated storage.

The Organomation NITRO (NiGen Nitro 35 / 70) is a high-performance nitrogen generator based on PSA technology, designed for applications requiring flow rates up to 70 L/min and purity up to 99.99%.It is available in two models:<ul><li>NITRO 35 – up to 35 L/min</li><li>NITRO 70 – up to 70 L/min</li></ul>The system delivers a dew point below -50 °C and hydrocarbon levels below 0.01 ppm, making it suitable for demanding applications such as LC/MS.An integrated 24 L internal tank ensures stable nitrogen supply and reduces downtime. The unit features a touchscreen display, supports remote access via Claind4You, and enables full system integration using MODBUS, MQTT, and HTTPS protocols.<h4>Key Features</h4><ul><li>Two models: 35 and 70 L/min</li><li>Nitrogen purity up to 99.99%</li><li>Dew point &lt; -50 °C</li><li>Hydrocarbon content &lt; 0.01 ppm</li><li>PSA (Pressure Swing Adsorption) technology</li><li>24 L internal storage tank</li><li>Touchscreen display with monitoring and alerts</li><li>Remote control via Claind4You</li><li>Integration via MODBUS, MQTT, HTTPS</li><li>Automatic operation with leak detection</li><li>Mobile design with wheels</li><li>Reliable continuous operation</li></ul><h4>Available Models</h4><h5>NITRO 35</h5><ul><li>Flow rate: up to 35 L/min</li><li>Weight: 75 kg</li></ul><h5>NITRO 70</h5><ul><li>Flow rate: up to 70 L/min</li><li>Weight: 90 kg</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator (Claind technology)</li><li>Touchscreen display</li><li>Automatic operation with alarms</li><li>Alarm logging and diagnostics</li><li>24 L internal tank</li><li>Remote access (Claind4You)</li><li>Communication protocols (MODBUS, MQTT, HTTPS)</li><li>Wheels for mobility</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Model: NiGen Nitro 35 / 70</li><li>Technology: PSA</li><li>Purity: up to 99.99%</li><li>Dew point: &lt; -50 °C</li><li>Hydrocarbons: &lt; 0.01 ppm</li><li>Output pressure: 0–6.5 bar (0–94 psi)</li></ul><h4>Flow Rate</h4><ul><li>NITRO 35: up to 35 L/min</li><li>NITRO 70: up to 70 L/min</li></ul><h4>Air Input Requirements</h4><ul><li>Particles: ≤ 0.01 µm</li><li>Oil: ≤ 0.01 mg/m³</li><li>Moisture: ≤ 3 °C dew point</li><li>Air flow:<ul><li>35: up to 90 L/min</li><li>70: up to 170 L/min</li></ul></li></ul><h4>Electrical</h4><ul><li>115 / 230 V</li><li>50–60 Hz</li><li>Power consumption: 200 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li><li>Humidity: 5–80%</li><li>Max altitude: 2000 m</li></ul><h4>Dimensions</h4><ul><li>92 × 26.5 × 75 cm</li></ul><h4>Weight</h4><ul><li>NITRO 35: 75 kg</li><li>NITRO 70: 90 kg</li></ul><h4>Communication</h4><ul><li>MODBUS (TCP), MQTT, HTTPS</li><li>Wi-Fi connectivity</li></ul><h4>Protection</h4><ul><li>IP20</li></ul><h4>Warranty</h4><ul><li>2 years</li></ul><h4>Accessories</h4><ul><li>100 L reservoir (air or nitrogen storage)</li><li>Installation kit for LC/MS (A200)</li><li>Dual Purity module (99.999% for LC-MS collision cell)</li></ul>

Organomation FLO Nitrogen Generator

The Organomation FLO provides adjustable nitrogen purity with integrated storage, real-time monitoring, and PSA technology for flexible lab applications.

The Organomation FLO (N2 FLO Series) is an advanced nitrogen generator based on PSA technology, designed for applications requiring flexible purity control and continuous operation.The system includes an oxygen analyzer and pressure regulator, enabling real-time nitrogen purity monitoring. Thanks to its integrated storage tank, no external buffer is required – one vessel serves both as buffer and supply reservoir.The generator automatically switches to energy-saving standby mode when production exceeds demand. An air quality analyzer (humidity and oil particles) ensures protection of the system and gas purity.The unit supports digital control and integration via MODBUS, MQTT, and HTTP protocols. An optional E941 food-grade configuration is available.<h4>Key Features</h4><ul><li>PSA technology (Claind Fast Purity)</li><li>Real-time nitrogen purity monitoring (O₂ analyzer)</li><li>Integrated storage tank (no buffer required)</li><li>Automatic standby mode for energy savings</li><li>Adjustable nitrogen purity</li><li>Digital control and communication (MODBUS, MQTT, HTTP)</li><li>Air quality protection (humidity, oil, particles)</li><li>Unattended continuous operation</li><li>Optional food-grade configuration (E941)</li></ul><h4>Available Models</h4><ul><li>N2 FLO 1</li><li>N2 FLO 2</li><li>N2 FLO 3</li><li>N2 FLO 4</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator</li><li>Oxygen analyzer</li><li>Pressure regulator</li><li>Digital control system</li><li>Integrated nitrogen tank</li><li>Air quality protection system</li><li>Communication interfaces (MODBUS, MQTT, HTTP)</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Technology: PSA (Fast Purity)</li><li>Dew point: -50 °C</li><li>Output pressure: 1.5 bar below inlet pressure</li><li>Noise: ≤ 60 dB</li><li>Protection class: IP20</li></ul><h4>Electrical</h4><ul><li>115 / 230 V</li><li>50–60 Hz</li><li>Power consumption: 50 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li></ul><h4>Air Input Requirements</h4><ul><li>Pressure: 6.5–13 bar</li><li>Quality: ISO 8573-1 Class 1.4.1</li><li>Dry, clean, oil-free air</li></ul><h4>Dimensions</h4><ul><li>118 × 40 × 80 cm</li></ul><h4>Weight</h4><ul><li>FLO 1: 92 kg</li><li>FLO 2: 113 kg</li><li>FLO 3: 134 kg</li><li>FLO 4: 155 kg</li></ul><h4>Performance vs Purity (L/min at 8.5 bar, 20 °C)</h4><h5>N2 FLO 1</h5><ul><li>99.999%: 3 L/min</li><li>99.99%: 6 L/min</li><li>99.9%: 15 L/min</li><li>99.5%: 25 L/min</li><li>99%: 33 L/min</li><li>98%: 40 L/min</li><li>97%: 46 L/min</li></ul><h5>N2 FLO 2</h5><ul><li>99.999%: 8 L/min</li><li>99.99%: 13 L/min</li><li>99.9%: 30 L/min</li><li>99.5%: 48 L/min</li><li>99%: 60 L/min</li><li>98%: 76 L/min</li><li>97%: 88 L/min</li></ul><h5>N2 FLO 3</h5><ul><li>99.999%: 11 L/min</li><li>99.99%: 20 L/min</li><li>99.9%: 43 L/min</li><li>99.5%: 71 L/min</li><li>99%: 88 L/min</li><li>98%: 111 L/min</li><li>97%: 130 L/min</li></ul><h5>N2 FLO 4</h5><ul><li>99.999%: 16 L/min</li><li>99.99%: 28 L/min</li><li>99.9%: 61 L/min</li><li>99.5%: 96 L/min</li><li>99%: 120 L/min</li><li>98%: 151 L/min</li><li>97%: 176 L/min</li></ul>

Organomation MAXI Nitrogen Generator

The Organomation MAXI delivers high-capacity nitrogen generation with PSA technology, real-time monitoring, and scalable industrial performance.

The Organomation MAXI (N2 MAXI Series) is a high-capacity industrial nitrogen generator based on PSA Fast Purity technology, designed for applications requiring very high flow rates and stable nitrogen supply.The system includes an oxygen analyzer and pressure regulator, enabling real-time purity monitoring. Its integrated tank eliminates the need for a buffer vessel, combining storage and delivery in one system.The generator automatically switches to energy-saving standby mode when production exceeds consumption. An air quality monitoring system (humidity and oil) protects both performance and gas purity.Full IT integration is enabled via MODBUS, MQTT, and HTTP, with an optional E941 food-grade configuration.<h4>Key Features</h4><ul><li>PSA technology (Claind Fast Purity)</li><li>Very high flow rates (up to thousands L/min)</li><li>Real-time nitrogen purity monitoring</li><li>Integrated storage tank (no buffer required)</li><li>Automatic standby mode</li><li>Adjustable purity levels</li><li>Digital control with IT integration</li><li>Air quality protection system</li><li>Unattended continuous operation</li><li>Optional food-grade configuration (E941)</li></ul><h4>Available Models</h4><ul><li>N2 MAXI 1</li><li>N2 MAXI 2</li><li>N2 MAXI 3</li><li>N2 MAXI 4</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator</li><li>Oxygen analyzer</li><li>Pressure regulator</li><li>Digital control system</li><li>Integrated nitrogen tank</li><li>Air quality monitoring system</li><li>Communication interfaces (MODBUS, MQTT, HTTP)</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Technology: PSA (Fast Purity)</li><li>Dew point: -50 °C</li><li>Output pressure: 1.5 bar below inlet pressure</li><li>Noise: ≤ 60 dB</li><li>Protection class: IP20</li></ul><h4>Electrical</h4><ul><li>115 / 230 V</li><li>50–60 Hz</li><li>Power consumption: 50 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li></ul><h4>Air Input Requirements</h4><ul><li>Pressure: 6.5–13 bar</li><li>Quality: ISO 8573-1 Class 1.4.1</li><li>Dry, clean, oil-free air</li></ul><h4>Dimensions</h4><ul><li>Height: 207.5 cm</li><li>Depth: 117 cm</li><li>Width:<ul><li>MAXI 1: 62 cm</li><li>MAXI 2: 103 cm</li><li>MAXI 3: 142 cm</li><li>MAXI 4: 182 cm</li></ul></li></ul><h4>Weight</h4><ul><li>MAXI 1: 730 kg</li><li>MAXI 2: 1400 kg</li><li>MAXI 3: 2050 kg</li><li>MAXI 4: 2700 kg</li></ul><h4>Performance vs Purity (L/min at 8.5 bar, 20 °C)</h4><h5>N2 MAXI 1</h5><ul><li>99.999%: 103 L/min</li><li>99.99%: 150 L/min</li><li>99.9%: 311 L/min</li><li>99.5%: 518 L/min</li><li>99%: 651 L/min</li><li>98%: 828 L/min</li><li>97%: 931 L/min</li></ul><h5>N2 MAXI 2</h5><ul><li>99.999%: 206 L/min</li><li>99.99%: 300 L/min</li><li>99.9%: 623 L/min</li><li>99.5%: 1,035 L/min</li><li>99%: 1,311 L/min</li><li>98%: 1,648 L/min</li><li>97%: 1,850 L/min</li></ul><h5>N2 MAXI 3</h5><ul><li>99.999%: 310 L/min</li><li>99.99%: 450 L/min</li><li>99.9%: 935 L/min</li><li>99.5%: 1,553 L/min</li><li>99%: 1,965 L/min</li><li>98%: 2,483 L/min</li><li>97%: 2,780 L/min</li></ul><h5>N2 MAXI 4</h5><ul><li>99.999%: 413 L/min</li><li>99.99%: 600 L/min</li><li>99.9%: 1,246 L/min</li><li>99.5%: 2,070 L/min</li></ul>

Organomation PICO Nitrogen Generator

The Organomation PICO delivers flexible nitrogen generation with adjustable purity, integrated storage, and real-time monitoring.

The Organomation PICO (N2 PICO Series) is a compact and high-performance nitrogen generator based on PSA Fast Purity technology, designed for applications requiring flexible purity control and stable nitrogen supply.The system includes an oxygen analyzer and pressure regulator, enabling real-time purity monitoring. Its integrated tank eliminates the need for a buffer vessel, combining storage and delivery in one unit.The generator automatically switches to energy-saving standby mode when production exceeds consumption. An air quality analyzer (humidity and oil particles) protects system performance and gas quality.The system supports digital control and integration via MODBUS, MQTT, and HTTP, with an optional E941 food-grade configuration.<h4>Key Features</h4><ul><li>PSA technology (Claind Fast Purity)</li><li>Real-time nitrogen purity monitoring</li><li>Integrated storage tank (no buffer required)</li><li>Automatic standby mode</li><li>Adjustable nitrogen purity</li><li>Digital control and communication (MODBUS, MQTT, HTTP)</li><li>Air quality protection system</li><li>Unattended continuous operation</li><li>Optional food-grade configuration (E941)</li></ul><h4>Available Models</h4><ul><li>N2 PICO 3</li><li>N2 PICO 4</li><li>N2 PICO 5</li><li>N2 PICO 6</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator</li><li>Oxygen analyzer</li><li>Pressure regulator</li><li>Digital control system</li><li>Integrated nitrogen tank</li><li>Air quality monitoring system</li><li>Communication interfaces (MODBUS, MQTT, HTTP)</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Technology: PSA (Fast Purity)</li><li>Dew point: -50 °C</li><li>Output pressure: 1.5 bar below inlet pressure</li><li>Noise: ≤ 60 dB</li><li>Protection class: IP20</li></ul><h4>Electrical</h4><ul><li>115 / 230 V</li><li>50–60 Hz</li><li>Power consumption: 50 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li></ul><h4>Air Input Requirements</h4><ul><li>Pressure: 6.5–13 bar</li><li>Quality: ISO 8573-1 Class 1.4.1</li><li>Dry, clean, oil-free air</li></ul><h4>Dimensions</h4><ul><li>138 × 40 × 130 cm</li></ul><h4>Weight</h4><ul><li>PICO 3: 230 kg</li><li>PICO 4: 270 kg</li><li>PICO 5: 310 kg</li><li>PICO 6: 350 kg</li></ul><h4>Performance vs Purity (L/min at 8.5 bar, 20 °C)</h4><h5>N2 PICO 3</h5><ul><li>99.999%: 25 L/min</li><li>99.99%: 41 L/min</li><li>99.9%: 90 L/min</li><li>99.5%: 143 L/min</li><li>99%: 173 L/min</li><li>98%: 230 L/min</li><li>97%: 268 L/min</li></ul><h5>N2 PICO 4</h5><ul><li>99.999%: 33 L/min</li><li>99.99%: 55 L/min</li><li>99.9%: 115 L/min</li><li>99.5%: 191 L/min</li><li>99%: 250 L/min</li><li>98%: 306 L/min</li><li>97%: 345 L/min</li></ul><h5>N2 PICO 5</h5><ul><li>99.999%: 38 L/min</li><li>99.99%: 66 L/min</li><li>99.9%: 153 L/min</li><li>99.5%: 240 L/min</li><li>99%: 306 L/min</li><li>98%: 383 L/min</li><li>97%: 441 L/min</li></ul><h5>N2 PICO 6</h5><ul><li>99.999%: 58 L/min</li><li>99.99%: 83 L/min</li><li>99.9%: 173 L/min</li><li>99.5%: 288 L/min</li><li>99%: 365 L/min</li><li>98%: 460 L/min</li><li>97%: 518 L/min</li></ul>

Products from category Laboratory gases and gas generators focused on Laboratory gases and gas generators from Organomation - page 1

Related content

Lib Search: Similarity EI Hybrid Search for Spectra Sent from Chromatogram Window

Deadline for RAFA 2026 Early Registration and Oral Abstract Submission is approaching

Let’s call a PT scheme a PT scheme!