<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 25th May 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application note by<strong> Shimadzu, </strong>presentation by <strong>MDCW / University of Washington</strong> and poster by <strong>Waters Corporation!</strong></p><h3><strong>1. MDCW / University of Washington: Implementing Tile-Based Fisher Ratio Analysis of GC×GC-TOFMS Data to Obtain a Master Peak Table of All Detected Analyte Compounds in Many Petroleum-Based Samples</strong></h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_9_Halvorsen_136808e314.pdf"><strong>Full PDF for download</strong></a></li></ul><section><div><div><div><div><div><div><p>This presentation describes the development of a new chemometric workflow for processing <strong>GC×GC-TOFMS (comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry)</strong> data from petroleum-derived fuels. The work was conducted by researchers from the University of Washington in collaboration with Chevron Technical Center and focuses on creating a comprehensive <strong>Master Peak Table (MPT)</strong> containing all detectable analytes across multiple fuel sample classes. The motivation was that moving from conventional GC to GC×GC dramatically increased chromatographic peak capacity and resolution, but also created a need for more sophisticated data analysis methods capable of handling the much larger number of detected compounds.</p><p>The analytical platform employed <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/37"><strong>GC×GC-TOFMS</strong></a> with a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1289"><strong>thermal-flow modulator</strong></a> and a TOF mass spectrometer detector. Fuel samples were analyzed using an <strong>Rxi-1 column (30 m × 0.25 mm × 0.25 μm)</strong> in the first dimension and an <strong>Rxi-17MS column (2.0 m × 0.18 mm × 0.20 μm)</strong> in the second dimension. The sample set included multiple petroleum products such as hydrobates, reformates, naphthas, FCC gasoline, and blank samples. Log-scale chromatograms revealed numerous late-eluting trace compounds and significant compositional differences between fuel batches that were not readily visible in conventional chromatographic representations.</p><p>To process these highly complex datasets, the researchers implemented a <strong>tile-based Fisher Ratio (F-ratio) chemometric approach</strong> using <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/348"><strong>ChromaTOF Tile software</strong></a>. The method divides GC×GC chromatograms into small tiles and identifies regions where analyte signals differ significantly between sample classes by comparing between-class and within-class variance. Instead of relying solely on F-ratio ranking, the workflow incorporates statistical testing against blank samples. Three blank chromatograms were used to establish tile-specific confidence intervals and p-test thresholds, allowing the system to determine whether detected signals represent genuine compounds rather than background noise. This strategy enabled the creation of a unified master peak table while minimizing problems caused by retention-time shifts and reducing the need for manual user intervention.</p><p>Application of the method generated <strong>719 statistically significant analyte hits</strong> across the fuel classes and demonstrated excellent reproducibility, with only <strong>6.3% of classifications showing inconsistent behavior among replicates</strong>. Detected compounds included hydrocarbons and aromatic species such as <strong>1-methylnaphthalene, 1,2,4-trimethylbenzene, β-vatirenene, 2-octene, and tetramethylheptadecane</strong>, whose occurrence patterns aligned well with expected fuel chemistry. The resulting master peak table contained both shared and sample-specific compounds and provided a much more comprehensive representation of petroleum composition than conventional workflows. The authors conclude that the approach should be broadly applicable to other complex sample types and could be extended using alternative chemometric metrics beyond Fisher Ratio analysis to address different experimental objectives.</p><h3><strong>2. Shimadzu: A Simple Method for Determination of β-Sitosterol as a Marker of Vegetable Oil Adulteration in Ghee by GC</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_06_sip_gc_042_en_f4c307005b.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>User Benefits</strong></h5><ul><li>ShimadzuNexis GC-2030 can be effectivelyused for determination of adulteration of Ghee with vegetable oil.</li><li>The NexisGC-2030 easily meets the acceptancecriteria as per the proposed FSSAI method no.01.097:2022.</li><li>This method is suitable for routine food industry analysis and academic research.</li></ul><p>The most common milk product in Indian cuisine is ghee or clarified butter. Due to its high cost, ghee is adulterated with vegetable oil, to gain commercial benefits. β-sitosterol, a common phytosterol, found in a variety of natural sources, including vegetable fat or oil from plants (Figure 1). It is used as a marker of vegetable oil adulteration in ghee<sup>1</sup>.</p><p>The primary goal of this study is to assess the vegetable oil adulteration in ghee by analyzing β-Sitosterol as a marker using gas chromatography (GC). This will establish a foundation for the rapid detection of ghee adulteration. In this study, a simple, sensitive, and inexpensive method is developed for extraction of β-Sitosterol from ghee which is then subjected to gas chromatography with flame ionization detection for quantitation. The effects of several important parameters influencing the extraction efficiencies of β-Sitosterol including water-immiscible organic solvent (type and volume), volume of water, sonication time, surfactant (type and concentration), and organic modifier (type and volume) were investigated. This method is ideal for routine analysis in the food industry during the manufacturing, processing, and commercial testing of milk fat samples, or for academic research purposes.</p><h4><strong>&nbsp;Sample Preparation and Analysis Conditions</strong></h4><p>Standard and sample preparations were conducted following the guidelines outlined in the proposed FSSAI method No. 01.097:20222. The analysis was performed using a Shimadzu <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexis+GC-2030"><strong>Nexis GC-2030</strong></a> equipped with a Flame Ionization Detector (FID), as shown in Figure 2. The specific configuration and analytical conditions used during the study are provided in Table 1.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>A gas chromatography–based method using GC-2030 was developed for the estimation of β-Sitosterol in ghee. The method exhibits a detection limit of 2 %, enabling the identification of vegetable oil adulteration in ghee at levels as low as 2 %. At this adulteration level, the signal of β-Sitosterol achieved a signal-to-noise (S/N) greater than 3, confirming the reliability of detection at the established limit. This method provides a reliable and effective approach for the quantification of β-Sitosterol, which serves as a marker for vegetable oil adulteration in ghee.</p><h3><strong>3. Waters Corporation: Multidimensional Characterization of Short Chain Chlorinated Paraffins (SCCPs) with GC-APCI and Cyclic Ion Mobility</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009386_3232568115.pdf"><strong>Full PDF for download</strong></a></li></ul><p>This poster presents a multidimensional analytical approach for the characterization of <strong>short-chain chlorinated paraffins (SCCPs)</strong>, a class of persistent environmental pollutants included in the Stockholm Convention due to their environmental persistence and bioaccumulation potential. SCCPs are highly complex mixtures of chlorinated hydrocarbons containing thousands of possible congeners, making their analysis particularly challenging. The study evaluates the use of <strong>gas chromatography coupled with atmospheric pressure chemical ionization, cyclic ion mobility spectrometry, and high-resolution mass spectrometry (GC-APCI-IMS-HRMS)</strong> as a powerful platform for improved SCCP characterization.</p><p>The analytical instrumentation consisted of a modified <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8890"><strong>Agilent 8890 gas chromatograph</strong></a> equipped with an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=7&amp;search=Rxi-5SilMS"><strong>Rxi-5SilMS capillary column</strong></a><strong> (30 m × 0.25 mm × 0.25 μm)</strong> and connected to a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/202"><strong>Waters SELECT SERIES Cyclic IMS</strong></a><strong> high-resolution mass spectrometer</strong> using an <strong>Atmospheric Pressure GC (APGC) ion source</strong>. Unlike conventional electron ionization methods, APCI was operated in negative-ion mode with a chloroform modifier, promoting the formation of characteristic <strong>[M+Cl]⁻ molecular ions</strong>. This significantly reduced fragmentation and provided strong molecular-ion signals, improving both qualitative identification and quantitative analysis of SCCP homologues.</p><p>Using three commercial SCCP technical mixtures (51.5%, 55%, and 63% chlorine content), the researchers demonstrated that GC-APCI-HRMS could selectively detect SCCP homologues according to carbon-chain length and degree of chlorination. Although substantial chromatographic overlap was observed among many homologues, the addition of <strong>ion mobility spectrometry (IMS)</strong> introduced a valuable extra separation dimension. Distinct drift-time versus m/z trendlines were observed for compounds sharing the same number of chlorine atoms, allowing homologues to be grouped and characterized more effectively than by chromatographic retention and mass spectrometry alone. The IMS data also enabled estimation of the relative abundance of individual homologue groups within each technical mixture.</p><p>The authors further explored the resolving power of the <strong>cyclic IMS device</strong> by employing multiple ion-mobility passes (up to eight cycles) to investigate individual SCCP congeners. While complete separation of individual congeners within a homologue group was not achieved, higher ion-mobility resolution revealed measurable differences between early- and late-eluting species and provided additional insight into compositional differences among SCCP mixtures. The study concludes that combining <strong>GC-APCI, cyclic ion mobility spectrometry, and high-resolution mass spectrometry</strong> offers a powerful multidimensional workflow for the characterization of complex chlorinated paraffin mixtures and may improve environmental monitoring and future regulatory analysis of these challenging contaminants.</p></div></div></div></div></div></div></section>

News from LabRulezGCMS Library - Week 22, 2026

<p><strong>Low analyte recovery is one of the most common challenges encountered during Solid Phase Extraction (SPE) sample preparation. In this Phenomenex Video Tip, Genevie Hodson, Senior Manager of Technical Support and Applications at Phenomenex, explains a practical troubleshooting approach for situations where analyte recovery after an </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=6&amp;manufacturerItems=50"><strong>SPE </strong></a><strong>procedure is lower than expected.</strong></p><p>The key objective of troubleshooting is not simply to identify that recovery is low, but to determine exactly where the analyte was lost during the extraction process. Once the point of loss has been identified, corrective actions can be implemented systematically.</p><h3><strong>Fundamental Principle of SPE Recovery Troubleshooting</strong></h3><h4><strong>Determine Where the Analyte Is Going</strong></h4><p>The most important step when troubleshooting low recovery is to identify the location of the missing analyte.</p><p>The process begins with the assumption that the sample originally contained 100% of the target analyte. If the final recovery is lower than expected, some portion of the analyte has been lost during SPE processing.</p><p>To identify the loss point, each fraction generated during the SPE procedure must be collected and analyzed separately.</p><h5><strong>Fractions to Collect</strong></h5><p>During the SPE workflow, the following fractions should be collected individually:</p><ul><li><strong>Load fraction (flow-through)</strong></li><li><strong>Wash fraction(s)</strong></li><li><strong>Elution fraction</strong></li></ul><p>Each collected fraction is transferred into a vial and analyzed using the laboratory’s analytical method.</p><p><strong>The analytical results reveal whether the analyte is:</strong></p><ul><li>Present in the load fraction</li><li>Present in one of the wash fractions</li><li>Present in the elution fraction</li><li>Missing from all collected fractions</li></ul><p>The location of the analyte provides direct information about the root cause of the recovery problem and guides the next troubleshooting steps.</p><h4><strong>Scenario 1: Analyte Detected in the Load Fraction</strong></h4><h5><strong>What It Means</strong></h5><ul><li>If the analyte appears in the load fraction, it was not retained by the SPE sorbent during sample loading.</li><li>Instead of binding to the stationary phase, the analyte passed directly through the cartridge.</li></ul><h5><strong>Possible Causes</strong></h5><ol><li><strong>Incorrect Phase Selection</strong></li></ol><ul><li>The selected SPE sorbent may not be appropriate for the analyte being extracted.</li><li>If the analyte cannot interact effectively with the sorbent chemistry, retention will not occur.</li></ul><ol start="2"><li><strong>Excessively Strong Sample Solvent</strong></li></ol><ul><li>The sample may be dissolved in a solvent that is too strong.</li><li>A strong sample solvent can prevent proper interaction between the analyte and the sorbent, causing breakthrough during loading.</li></ul><ol start="3"><li><strong>Incorrect pH Conditions</strong></li></ol><ul><li>Retention often depends on maintaining the analyte in the correct ionization state.</li><li>If the sample pH is not appropriate, the analyte may not interact correctly with the sorbent and therefore will not be retained.</li></ul><ol start="4"><li><strong>Sorbent Overload</strong></li></ol><ul><li>The SPE cartridge may have received:<ul><li>Too much analyte</li><li>Too much sample matrix</li></ul></li><li>When sorbent capacity is exceeded, analytes can break through the cartridge and appear in the load fraction.</li></ul><h5><strong>Corrective Action</strong></h5><p>When overload is suspected, increasing the amount of sorbent can improve analyte retention and prevent breakthrough.</p><h4><strong>Scenario 2: Analyte Detected in the Wash Fraction</strong></h4><h5><strong>What It Means</strong></h5><p>If the analyte appears in the wash fraction, it was initially retained but subsequently removed during the washing step.</p><h5><strong>Possible Causes</strong></h5><ol><li><strong>Wash Solvent Too Strong</strong></li></ol><ul><li>The most common cause is an overly aggressive wash solvent.</li><li>A wash solution with excessive elution strength can remove the analyte before the intended elution step.</li></ul><ol start="2"><li><strong>Incorrect pH During Washing</strong></li></ol><ul><li>When pH control is required for retention, the same conditions must be maintained throughout the process.</li><li>A pH change during washing may alter analyte retention and cause premature elution.</li></ul><h5><strong>Corrective Action</strong></h5><p><strong>Review:</strong></p><ul><li>Wash solvent composition</li><li>Wash solvent strength</li><li>pH conditions during washing</li></ul><p>Adjustments should ensure that the analyte remains retained until the elution step.</p><h4><strong>Scenario 3: Analyte Missing from All Fractions</strong></h4><h5><strong>What It Means</strong></h5><ul><li>If the analyte is not found in the load fraction, wash fractions, or elution fraction, it is likely still retained on the SPE sorbent.</li><li>In this situation, the analyte has not been effectively eluted from the cartridge.</li></ul><h5><strong>Possible Cause</strong></h5><p><strong>Elution Solvent Not Strong Enough</strong></p><ul><li>The final elution solvent may lack sufficient strength to remove the analyte from the sorbent.</li><li>As a result, the analyte remains bound to the stationary phase and never reaches the collection vial.</li></ul><h4><strong>Corrective Action</strong></h4><ul><li>Increase the strength of the elution solvent during the final SPE elution step.</li><li>A stronger solvent can improve analyte desorption and recovery.</li></ul><h3><strong>Summary of Low Recovery Troubleshooting Strategy</strong></h3><p>The recommended troubleshooting workflow consists of four steps:</p><h4><strong>1. Collect All SPE Fractions</strong></h4><p><strong>Gather:</strong></p><ul><li>Load fraction</li><li>Wash fraction(s)</li><li>Elution fraction</li></ul><h4><strong>2. Analyze Each Fraction Separately</strong></h4><p>Use the analytical method to determine where the analyte is located.</p><h4><strong>3. Identify the Root Cause</strong></h4><div><div><h5><strong>Analyte Location&nbsp;&nbsp;/&nbsp;&nbsp;Likely Cause</strong></h5><ul><li><strong>Load fraction:</strong> Incorrect phase, strong sample solvent, incorrect pH, sorbent overload</li><li><strong>Wash fraction: </strong>Wash solvent too strong, incorrect pH</li><li><strong>Not found in any fraction:</strong> Incomplete elution from sorbent</li></ul></div></div><h4><strong>4. Apply Corrective Measures</strong></h4><p><strong>Modify:</strong></p><ul><li>Sorbent selection</li><li>Sample solvent composition</li><li>pH conditions</li><li>Sorbent amount</li><li>Wash solvent strength</li><li>Elution solvent strength</li></ul><h3><strong>Other Common SPE Issues</strong></h3><p>In addition to low recovery, several other SPE-related problems are commonly encountered.</p><p><strong>These include:</strong></p><ul><li>Contamination</li><li>Reproducibility Problems</li><li>Flow-Related Issues</li></ul><h3><strong>Conclusion</strong></h3><p>Successful troubleshooting of low SPE recovery depends on identifying where the analyte is lost during the extraction process. Collecting and analyzing individual SPE fractions provides a systematic method for locating the analyte and determining the underlying cause of poor recovery.</p><p>Whether the analyte passes through during loading, elutes during washing, or remains bound to the sorbent after extraction, fraction-based investigation enables targeted corrective actions. This structured approach allows SPE methods to be optimized efficiently and helps restore acceptable analyte recovery.</p>

SPE Troubleshooting: Understanding and Resolving Low Recovery in Solid Phase Extraction

<p><strong>New edition of the Wiley Registry of Mass Spectral Data expands compound coverage to over 915,500 reference spectra, strengthening a foundational layer of Wiley’s scientific data and research intelligence portfolio.</strong></p><p>Wiley, a global leader in authoritative content and research intelligence for the advancement of scientific discovery, innovation and learning, today released the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/887"><strong>Wiley Registry of Mass Spectral Data 2026</strong></a>.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Wiley_Registry_of_Mass_Spectral_Data_2026_bc408d8245.jpg" alt="Wiley: Registry of Mass Spectral Data 2026" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Wiley_Registry_of_Mass_Spectral_Data_2026_bc408d8245.jpg 110w," sizes="100vw" width="1527" height="2162"></p><p>As AI-driven research pipelines become standard practice across pharmaceuticals, materials science and forensic investigation, the quality of reference data underpinning those pipelines determines whether results are trusted—or stall at the verification stage.</p><p>The Wiley Registry of Mass Spectral Data 2026 addresses this issue directly: <strong>One of the world’s largest and most trusted mass spectral reference databases</strong> for identifying unknown chemical compounds, it is now expanded and validated to meet the analytical demands of modern, AI-assisted laboratory workflows.</p><p>Laboratories face increasingly complex analytical challenges—from detecting emerging environmental contaminants to identifying novel substances in forensic investigations. As a result, having access to a comprehensive, rigorously validated spectral database has become foundational to getting results right. It is also a critical validation layer for AI-driven workflows.</p><p>The Wiley Registry database helps scientists and researchers around the world with <strong>environmental testing, forensic investigation, food safety research, drug analysis, defense research, homeland security</strong>, and more, providing critical reference data for identifying and analyzing chemical compounds and materials.</p><p>The new edition represents a significant expansion of the collection, which now contains <strong>more than 915,500 reference spectra</strong>—the unique chemical “signatures” used to identify substances—making it among the most comprehensive databases of its kind. <strong>More than 42,000 new GC-MS spectra</strong> representing <strong>34,100 compounds </strong>have been added, with data from laboratories, world patents and peer-reviewed scientific literature. Each spectrum is validated to the same rigorous standard, ensuring that the data perform reliably whether a researcher is running a manual comparison or feeding it into an automated identification pipeline.</p><p>The Wiley Registry is part of Wiley’s growing portfolio of scientific data and research intelligence solutions, which includes spectral databases, chemistry and materials literature, and analytical tools designed to support researchers and organizations from discovery through to applied outcomes. Wiley spectral database solutions are trusted by the world’s top pharmaceutical companies and many Fortune 500 organizations—reflecting Wiley’s mission to transform knowledge into actionable intelligence, equipping researchers with the rigorous reference data that drives real-world scientific discovery.</p><p><strong>Updated every three years,</strong> the Wiley Registry is among the company’s longest-standing data products, with a history spanning decades of continuous development.</p><p>“<i>The Wiley Registry is a foundational layer of intelligence for any laboratory conducting GC-MS analysis—and increasingly, for the AI-assisted workflows being built around that analysis</i>,” said Armughan Rafat, Wiley senior vice president and chief AI &amp; data analytics officer. “<i>By expanding compound coverage and applying consistent quality measures across the collection, we help analysts provide a deterministic layer to move from unknown to identified faster.</i>”</p><p>Available in the most common instrumentation manufacturer formats, the Wiley Registry of Mass Spectral Data 2026 also offers bundled options to access even more data with its <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/885"><strong>Wiley Registry/NIST</strong></a> and the <strong>KnowItAll GC-MS Library collection</strong> for labs seeking the most comprehensive coverage and workflow integration. The Wiley Registry is also available as a KnowItAll subscription for continued access to new data as they are added to the collection.</p><p>Spectral databases contain detailed “<strong>fingerprints</strong>” of substances captured through analytical techniques such as <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/934"><strong>mass spectrometry (MS)</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1271"><strong>Raman spectroscopy</strong></a>, enabling researchers to identify unknown materials by comparing their spectral signatures against validated reference spectra. This data is essential for quality control, research verification and discovery across industries from pharmaceuticals to materials science.</p><blockquote><p>For more information about the Wiley Registry of Mass Spectral Data 2026, please <a target="_blank" rel="noopener noreferrer" href="https://sciencesolutions.wiley.com/solutions/technique/gc-ms/wiley-registry-of-mass-spectral-data/"><strong>visit this website</strong></a>.</p></blockquote><h4><strong>About Wiley</strong></h4><p>Wiley (NYSE: WLY) is a global leader in authoritative content and research intelligence for the advancement of scientific discovery, innovation, and learning. With more than 200 years at the center of the scholarly ecosystem, Wiley combines trusted publishing heritage with AI-powered platforms to transform how knowledge is discovered, accessed, and applied. From individual researchers and students to Fortune 500 R&amp;D teams, Wiley enables the transformation of scientific breakthroughs into real-world impact. From knowledge to impact—Wiley is redefining what's possible in science and learning. Visit us at Wiley.com.</p>

Wiley releases the 2026 edition of the Wiley Registry of Mass Spectral Data to expand GC-MS identification intelligence

Article

Product

Application

Academy

Presentation

Software

Video

Poster

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

For over 200 years we have been helping people and organizations develop the skills and knowledge they need to succeed.
We develop digital education, learning, assessment, and certification solutions to help universities, businesses, and individuals move between education and employment and achieve their ambitions.

Wiley

Thermo Scientific SII for Empower Software

Incorporate and operate Thermo Scientific UHPLC, HPLC, GC, and IC instruments within other vendors' software platforms with the Thermo Scientific™ SII for Empower 3 Software plug-in.

<div id="product-description"><p><strong>Incorporate and operate Thermo Scientific UHPLC, HPLC, GC, and IC instruments within other vendors' software platforms with the Thermo Scientific™ Standard Instrument Integration (SII) for Empower 3 Software plug-in. The SII for Empower 3 plug-in is based on the </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Thermo Scientific™ Chromeleon™ Chromatography Data System (CDS)</strong></a><strong> and offers unique and smart features that deliver maximum ease-of-use, reliability, and performance. It also enables Thermo Scientific™ chromatography systems to be operated and controlled by </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/627"><strong>Waters™ Empower™ 3 CDS software</strong></a><strong>.</strong></p></div><div><p>While <strong>Chromeleon CDS</strong> is the recommended software for control of <strong>Thermo Scientific UHPLC, HPLC, GC, and IC </strong>instruments due to its maximum ease of use, reliability, and performance, other vendors' CDS software can also incorporate and operate these instruments with the <strong>SII for Empower™ 3 Software</strong> plug-in.</p><p>The SII for Empower™ Software installs and uses portions of<strong> </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Chromeleon CDS</strong></a>, such as the Services Manager, Instrument Configuration Manager, Instrument View, and Instrument Method Editor, to deliver flawless integration of Thermo Scientific LC, IC, and GC instrumentation into Empower™ 3 CDS without loss of functionality. Instrument control, data acquisition, and data processing are performed completely under Empower™ 3 Software.</p><p><strong>Configure your instruments</strong><br>Up to four instruments can be configured per Empower™ node using the standard Chromeleon Instrument Configuration Manager.</p><p><strong>Control your instruments</strong><br>SII for Empower™ Software provides a complete set of commands because they are present under native <strong>Chromeleon CDS </strong>control. For the user, this means that all the Chromeleon CDS tools and advanced features, such as preparing the next sample during an ongoing analysis, can be implemented to increase productivity and receive more data with fewer injections.</p><p><strong>SII for Empower™ controls the following systems:</strong></p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=37&amp;manufacturerItems=3&amp;search=Vanquish"><strong>Thermo Scientific™ Vanquish™ HPLC and UHPLC systems</strong></a></li><li><strong>Thermo Scientific™ UltiMate™ 3000 HPLC systems</strong></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/410"><strong>Thermo Scientific™ Dionex™ ICS-6000 HPIC™ system</strong></a></li><li><strong>Thermo Scientific™ Dionex™ ICS-5000 HPIC™ system</strong></li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/408"><strong>Thermo Scientific™ Dionex™ Integrion™ HPIC™ system</strong></a></li><li><strong>Thermo Scientific™ Dionex™ Aquion™ system</strong></li><li><strong>Thermo Scientific™ TRACE™ 1300 GC systems</strong></li></ul><p>Monitoring instrument status within Empower™ can be performed using the <strong>Empower™ Control Panel. </strong>Here, an enhanced SII Instrument View is easily accessed to provide further options to control and monitor the instrument and its modules.</p><p><strong>Instrument Methods</strong><br>Setting up an instrument method is simple, intuitive, and fast due to the <strong>SII for Empower™ Instrument Method Wizard and Editor</strong>, both of which are integrated into the Instrument <strong>Method Editor of Empower™</strong>. The wizard guides the user through all modules, enabling the entry of all necessary information, while the editor allows the review and modification of all aspects of a method.</p><p><strong>Process your data</strong><br>Complete data processing takes place inside<strong> Empower™ Software</strong>, which allows you to use all functionalities as you would normally, for example, overlay of chromatograms or other channels like pressure traces. The Empower™ user experience <strong>does not change </strong>for any data processing aspect.</p></div>

Thermo Scientific™ Chromeleon™ XPS Open Access Software

Thermo Scientific™ Chromeleon™ XPS provides streamlined and easy-to-use interface for Thermo Scientific™ Chromeleon™ CDS, while maintaining full capabilities of the CDS software.

<p><strong>In modern laboratories, chromatography techniques and the use of mass spectrometry (MS) detection are in high demand. Until recently, MS detectors were regarded as sophisticated detection tools that could be operated only by a highly trained specialist. Nowadays mass spectrometers are increasingly used as straightforward detectors for chromatography.</strong></p><p>Alongside this move into routine use of MS is the continued deskilling of staff in the laboratory world, causing highly experienced chromatographers to be in short supply. The result is a substantial number of regular scientists and process operators that need to generate chromatographic results using advanced instrumentation themselves.</p><p>The solution is an Open Access tool enabling users to simply walk up and use a very straightforward interface to exploit the full power of the chromatography data system (CDS), without actually using the CDS software itself. <strong>Thermo Scientific™ Chromeleon™ XPS </strong>provides this <strong>streamlined and easy-to-use</strong> interface for <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Thermo Scientific™ Chromeleon™ CDS</strong></a>, while maintaining <strong>full capabilities</strong> of the CDS software, like instrument control, data processing, reporting and compliance tools.</p><h3><strong>Workflow</strong></h3><p>Users can walk up to <strong>any chromatography instrument</strong> connected to the CDS, with or without MS detection, and start to run their analysis with only a <strong>few mouse-clicks.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_5e8f8c3dec.jpg" alt="Thermo Scientific™ Chromeleon™ XPS Open Access Software: First, select the analysis to perform (A) and which instrument should be used (B). The instrument overview shows the current instrument status’ and displays the estimated wait time until each instrument is available and the number of sample positions still available.  The instrument list is filtered depending on the analysis selected and the users privileges to only show appropriate instruments." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_5e8f8c3dec.jpg 196w," sizes="100vw" width="876" height="697"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_2_a8b64a52ae.jpg" alt="Thermo Scientific™ Chromeleon™ XPS Open Access Software: Next, enter the sample names (C) and any other parameters (D) required for the analysis." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_2_a8b64a52ae.jpg 196w," sizes="100vw" width="876" height="697"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_3_4b4367ffae.jpg" alt="Thermo Scientific™ Chromeleon™ XPS Open Access Software: Place the sample vials in the indicated positions and select Submit." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_3_4b4367ffae.jpg 196w," sizes="100vw" width="876" height="697"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_4_0386d31c9a.jpg" alt="Thermo Scientific™ Chromeleon™ XPS Open Access Software: The sequence is submitted and will run. The operator is shown the expected start and finish time of the analyses." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_4_0386d31c9a.jpg 245w," sizes="100vw" width="625" height="263"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_5_1b51ab8dd2.jpg" alt="Thermo Scientific™ Chromeleon™ XPS Open Access Software: At the end of the run, the results are automatically printed and/or exported and a link to the exported report can be distributed via email." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_5_1b51ab8dd2.jpg 245w," sizes="100vw" width="814" height="309"></p><h3><strong>Configuration and management</strong></h3><p>Running samples is as easy as described above once Chromeleon XPS software is set up, configured and managed by an experienced chromatographer.</p><ul><li>All the methods required for the analysis must be created; the instrument method with all instrument control and data acquisition parameters, the processing method with all data processing parameters and the report template with all required results, to be reported.&nbsp;</li><li>A Chromeleon eWorkflow is created using these methods. An eWorkflow is an electronic procedure that automates all steps of the laboratory process related to a chromatographic analysis</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_6_a3b2219e42.jpg" alt="Thermo Scientific™ Chromeleon™ XPS Open Access Software: The lab manager can customize Chromeleon XPS to show or hide individual toolbar buttons (A), which eWorkflows are visible to users (B) and which instruments they can access (C)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_6_a3b2219e42.jpg 196w," sizes="100vw" width="876" height="697"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_7_d647111f5d.jpg" alt="Thermo Scientific™ Chromeleon™ XPS Open Access Software: In addition, it is possible to define various system options, such as which email notifications to send." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Chromeleon_XPS_Open_Access_Software_7_d647111f5d.jpg 193w," sizes="100vw" width="659" height="533"></p><p>Chromeleon XPS Open Access software lets <strong>any user</strong> run samples on their own by delivering a <strong>clean, streamlined walk-up interface</strong> that utilizes the<strong> full power</strong> of Chromeleon CDS. Users can access<strong> all instruments controlled by </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Chromeleon CDS</strong></a><strong>, including MS</strong>, and automatically receive results or notifications about run completion or failure. The management console contains advanced customization options to fulfill any organization’s requirements, included fully regulated environments.</p><p><strong>Chromeleon XPS software provides error-free execution of any chromatography analysis with minimal training requirements for users.</strong></p>

Thermo Scientific SureSTART Vials and Well Plates Collection

Start your analysis with confidence using SureSTART vials, caps, well plates, and kits—offering full compatibility, quality materials, and performance across three levels.

<h4><strong>Streamlined choice. Trusted quality.</strong></h4><p><strong>Start your analysis with confidence using Thermo Scientific™ SureSTART™ vials, caps, inserts, well plates, mats, and certified kits designed to meet your analytical, regulatory, and performance requirements. With full instrument compatibility, high material quality, and consistent performance across three defined levels, the SureSTART collection offers a smarter way to choose the right sample containment solution for your workflow.</strong></p><h3><strong>Why choose SureSTART?</strong></h3><ul><li><strong>Proven reliability</strong>: Every product is manufactured and certified to meet physical specifications—no weak links in your workflow.</li><li><strong>Clear selection</strong>: Three performance levels help you balance sensitivity, robustness, and cost, now visually marked with one, two, or three waves on the vial.</li><li><strong>Universal compatibility</strong>: Designed for seamless integration with all major GC, HPLC/UHPLC, and MS autosamplers across all vendors.</li><li><strong>Certified cleanliness</strong>: Products are manufactured using the purest glass and plastics with low extractables and leachables, including GOLD-grade and silanized glass.</li><li><strong>Maximum sample integrity</strong>: Minimize analyte loss and background peaks with precision-engineered sealing, surface chemistry, and material composition.</li><li><strong>Bulk savings &amp; simplified inventory</strong>: Available in multiple pack sizes, performance levels, and formats to support your lab’s needs and budget.</li></ul><h3><strong>The Three Performance Levels</strong></h3><ul><li><strong>Level 1 – Everyday analysis</strong>: For general-purpose GC/HPLC detection (e.g. UV/Vis, FID, RI). These chromatography-approved products are ideal for routine analyses with cost-efficiency in mind.</li><li><strong>Level 2 – High-throughput analysis</strong>: Designed for regulated labs requiring robust and reproducible data, especially when using MS detectors for routine quantification.</li><li><strong>Level 3 – High performance</strong>: For the most sensitive and selective analyses near the method detection limit. Packed in cleanroom environments and made with ultra-pure materials for maximum sample security and MS compatibility.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_5a8b0da936.jpg" alt="Thermo Scientific SureSTART Vials and Well Plates Collection: Three performance levels help you balance sensitivity, robustness, and cost, now visually marked with one, two, or three waves on the vial." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_5a8b0da936.jpg 245w," sizes="100vw" width="1182" height="270"></p><h3><strong>SureSTART Certified Vial and Cap Kits</strong></h3><ul><li><strong>Specification Certified</strong>: Routine analyses – Certified for physical specifications; no individual certificate.</li><li><strong>LC/GC Certified</strong>: Chromatography-grade – Tested for 15 physical parameters with LC-UV &amp; GC-FID; certificate included.</li><li><strong>MSCERT</strong>: For LC-MS/GC-MS – Certified low-adsorption kits tested with MS; includes SureStop™ vials with AVCS™ caps.</li><li><strong>MSCERT+</strong>: For trace-level MS or DIA – Pre-cleaned, tested with LC-MS/GC-MS, and sold only as kits to ensure purity.</li><li><strong>Application Certified</strong>: Pre-matched kits for specific instruments or validated applications.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_2_fef6049d71.jpg" alt="Thermo Scientific SureSTART Vials and Well Plates Collection: There are several factors to consider when choosing a vial or well plate for your application. The table below will help guide you through this process to determine what type of product/performance level is most suitable for your application requirements." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_2_fef6049d71.jpg 204w," sizes="100vw" width="1515" height="1159"></p><h3><strong>SureSTART Well Plates and Mats</strong></h3><p>Thermo Scientific™ WebSeal™ well plates are ideal for laboratories seeking to increase autosampler capacity, reduce solvent usage, and streamline high-throughput workflows. Available in <strong>96- and 384-well formats</strong>, they offer a certified alternative to traditional vials and are fully compatible with automated SPE/SLE platforms.</p><ul><li><strong>Space-saving efficiency</strong>: Replace vials with well plates to increase sample capacity up to 8× and reduce storage footprint.</li><li><strong>Flexible performance levels</strong>:<ul><li><strong>Level 1: Standard plates for routine</strong>, non-regulated use (GC-tested).</li><li><strong>Level 2: Low-bleed plates and high-performance mats</strong>, validated for LC-MS/GC-MS.</li><li><strong>Level 3: Premium WebSeal Plate+</strong> with glass-coated plastic wells—ideal for trace analytes and protein adsorption control.</li></ul></li><li><strong>Solvent stability and clean sample contact</strong>: WebSeal Plate+ uses nanolayered silicon dioxide for minimal extractables and ultra-low adsorption.</li><li><strong>Compatible sealing options</strong>:<ul><li><strong>Silicone mats: </strong>For long-term storage and consistent results.</li><li><strong>Pre-slit mats: </strong>For autosampler injection without evaporation or contamination.</li><li><strong>Adhesive seals: </strong>For single-use workflows and re-sealing options with cavity protection.</li></ul></li></ul><p>Whether you work with polar solvents, proteins, or trace-level analyses, SureSTART well plates and sealing accessories help you optimize throughput, precision, and data confidence across all chromatography workflows.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_3_abce3dd960.jpg" alt="Thermo Scientific SureSTART Vials and Well Plates Collection: Selecting the perfect Thermo Scientific WebSeal well plates and mats for your chromatography requirements is easy using our selector tools and resources." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Sure_START_Vials_and_Well_Plates_Collection_3_abce3dd960.jpg 245w," sizes="100vw" width="1516" height="902"></p>

VUV Analytics VGA-100 Gas Chromatography Detector for TRACE 1600 Series GC

The VGA-100 GC detector with VUV technology and TRACE 1600 GC delivers rapid, accurate analysis of isomers and complex mixtures with higher productivity and reliability.

<p><strong>The Thermo Scientific™ VGA-100™ Gas Chromatography Detector (developed by VUV Analytics, Inc.) introduces the next generation of GC detection through revolutionary vacuum ultraviolet (VUV) absorption technology. Delivering unmatched sensitivity, selectivity, and precision, the VGA-100 provides both qualitative and quantitative data with exceptional accuracy.</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_VGA_100_Gas_Chromatography_Detector_2_e45d1cf5c3.jpg" alt="Thermo Scientific VGA-100 Gas Chromatography Detector." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_VGA_100_Gas_Chromatography_Detector_2_e45d1cf5c3.jpg 165w," sizes="100vw" width="752" height="710"></p><h3><strong>Key Benefits</strong></h3><ul><li><strong>Seamless integration with TRACE 1600 Series GC</strong> – Together, the VGA-100 and<a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/483"><strong> TRACE™ 1600 GC </strong></a>form a powerful, scalable, and intuitive system designed to meet the most demanding laboratory workflows.</li><li><strong>Enhanced productivity and speed</strong> – Faster analysis, higher throughput, and reduced operational costs thanks to automated spectral deconvolution and streamlined data processing.</li><li><strong>Superior selectivity and clarity</strong> – Compound-specific absorption spectra enable confident identification of isomers and co-eluting compounds without baseline separation.</li><li><strong>Universal and mass-sensitive detection</strong> – Provides comprehensive 3D data (time, wavelength, intensity) with library matching for reliable compound identification across a broad range of analytes.</li><li><strong>Ease of use</strong> – No vacuum pumps required, minimal maintenance, intuitive operation, and full compatibility with both R&amp;D and QC environments.</li><li><strong>VUV Analyze™ Software integration</strong> – Push-button workflows, automated Time Internal Deconvolution™ (TID), and ready-to-use spectral libraries deliver fast, reliable, and reproducible results.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_VGA_100_Gas_Chromatography_Detector_5_e387eb9360.jpg" alt="Thermo Scientific VGA-100 Gas Chromatography Detector: VUV spectra of hydrocarbons exhibit class-based similarities, simplifying complex fuel mixture analysis." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_VGA_100_Gas_Chromatography_Detector_5_e387eb9360.jpg 245w," sizes="100vw" width="1170" height="552"></p><h3><strong>Applications</strong></h3><p>The VGA-100 detector addresses critical analytical challenges such as accurate isomer identification, analyte co-elution, long run times, and complex data interpretation. It is especially impactful in:</p><ul><li><strong>Petrochemical analysis</strong> – Simplifies PIONA (paraffins, isoparaffins, olefins, naphthenes, aromatics) characterization in finished fuels, enabling rapid, automated fuel analysis.</li><li><strong>Environmental, food, and pharmaceutical testing</strong> – Reliable quantification of complex mixtures with improved accuracy and reduced calibration complexity.</li><li><strong>Quality control and research labs</strong> – Scalable, intuitive platform supporting compliance, throughput, and robust data integrity.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_VGA_100_Gas_Chromatography_Detector_3_ddcbe84bde.jpg" alt="Thermo Scientific VGA-100 Gas Chromatography Detector: Simplified PIONA compound analysis in finished gasoline." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_VGA_100_Gas_Chromatography_Detector_3_ddcbe84bde.jpg 245w," sizes="100vw" width="956" height="426"></p><h3><strong>Summary</strong></h3><p>The <strong>VGA-100 GC Detector</strong> sets a new benchmark in gas chromatography by combining VUV absorption technology with the robust performance of the TRACE 1600 Series GC. Laboratories gain a powerful “ready-to-use” solution that enhances throughput, accuracy, and confidence across diverse industries.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_VGA_100_Gas_Chromatography_Detector_4_5595ee9da1.jpg" alt="Thermo Scientific VGA-100 Gas Chromatography Detector." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_VGA_100_Gas_Chromatography_Detector_4_5595ee9da1.jpg 139w," sizes="100vw" width="816" height="918"></p>

VUV Analytics VUV Detector for TRACE 1600 Series GC

Thermo Scientific VGA-100 and LUMA VUV detectors for TRACE 1600 GC deliver accurate hydrocarbon speciation, impurity detection, and trace-level analysis with speed and reliability.

<div><div><div><div><div><h4><strong>Precision, clarity, and confidence from VUV spectroscopy in GC</strong></h4></div></div><div><div><p>VUV detectors paired with the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/483"><strong>Thermo Scientific TRACE 1600 Series GC </strong></a>conquer the challenge of complex mixtures, co-eluting compounds, and isomer differentiation&nbsp;for accurate hydrocarbon speciation, impurity detection, and trace-level detection.</p><p>Gas Chromatography (GC) is evolving, and VUV (Vacuum Ultraviolet) technology is at the forefront of this transformation. Now available on the TRACE 1600 Series GC, VUV spectroscopy, through VUV <strong>Analytics VGA-100 </strong>detector and the<strong> LUMA detector</strong>, provides accuracy in hydrocarbon speciation, impurity detection, and trace-level analysis.</p><h5><strong>Greater accuracy, automation, and confidence in your GC analysis</strong></h5><p>Traditional GC detectors struggle with complex mixtures, co-eluting compounds, and isomer differentiation. VUV spectroscopy overcomes these limitations by using absorption-based detection, capturing unique molecular fingerprints for each compound.</p><div><h3><strong>How VUV technology works</strong></h3></div><div><div><div><div><div><p>VUV detection provides qualitative and quantitative spectral information for most gas phase compounds.&nbsp;</p></div></div></div></div><div><div><div><div><div><p><strong>Broad-spectrum absorption:&nbsp;</strong>VUV detectors measure how molecules absorb light in the vacuum ultraviolet range (120–240 nm), revealing unique spectral signatures.</p><p><strong>Automated compound ID:&nbsp;</strong>To reduce errors and improve analysis speed, VUV software automatically deconvolutes overlapping peaks. unlike traditional GC detectors.</p><p><strong>Quantitative and qualitative insights:&nbsp;</strong>VUV enables compound identification and quantification in a single run by analyzing complete spectral data.</p></div></div></div></div></div><div><div><div><div><h4><strong>Principle of operations</strong></h4><div><div><div><div><ol><li><b style="font-size:1.0pc;"><strong>Sample injection in the GC: </strong></b>A sample is injected into the GC system and separated into its components as it travels through the GC column.</li><li><strong>Elution from the analytical column:&nbsp;</strong>The separated components elute from the GC column and enter the VUV detector.</li><li><strong>VUV light source:&nbsp;</strong>A deuterium lamp as VUV light source emits light in the vacuum ultraviolet range (typically 120-200 nm).</li><li><strong>Flow cell:&nbsp;</strong>The eluted components pass through a flow cell where they are exposed to the VUV light.</li><li><strong>Analytes absorption of VUV light:&nbsp;</strong>As components pass through the flow cell, they absorb VUV light at specific wavelengths. Each compound has a unique absorption spectrum in the VUV range.</li><li><strong>Analytes detection:&nbsp;</strong>Photodiode array detector measures the intensity of the transmitted VUV light. The decrease in light intensity corresponds to the absorption by the analytes.</li><li><strong>Data processing:&nbsp;</strong>Detector sends the signal to a data processing system, which converts the absorption data into a chromatogram.</li></ol><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_VUV_Detector_for_TRACE_1600_Series_GC_e3f5a229d6.jpg" alt="Thermo Scientific  VUV Detector for TRACE 1600 Series GC." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_VUV_Detector_for_TRACE_1600_Series_GC_e3f5a229d6.jpg 245w," sizes="100vw" width="2048" height="1128"></p><div><div><div><h3><strong>VUV for petrochemical and refining</strong></h3><ul><li><strong>PIONA analysis: </strong>Accurately classify paraffins, isomers, olefins, naphthenes, and aromatics with automated deconvolution for fast, confident hydrocarbon speciation and group type analysis in complex fuels.</li><li><strong>Fuel quality control (ASTM D8071):</strong> Ensure compliant, efficient fuel characterization using VUV’s spectral fingerprints, delivering fast, automated analysis for gasoline and other fuel blends.</li><li><strong>Sulfur &amp; nitrogen speciation:</strong> Detect and speciate sulfur and nitrogen compounds at trace levels in fuels, ensuring regulatory compliance and protecting product quality.</li></ul></div></div></div><div><div><div><h3><strong>VUV for pharmaceutical and chemicals</strong></h3><ul><li><strong>Residual solvent analysis: </strong>Faster, more sensitive detection of residual solvents, ensuring compliance with USP &lt;467&gt; and reducing reanalysis with precise, automated detection.</li><li><strong>Impurity profiling in APIs: </strong>VUV absorbance provides greater selectivity and lower detection limits than traditional GC detectors, ensuring reliable impurity profiling in even the most complex APIs.</li><li><strong>Trace-level contamination detection: </strong>Identify unknown contaminants at low levels in pharmaceuticals, chemicals, and environmental samples with enhanced selectivity and sensitivity.</li></ul></div><div><div><div><div><div><h4><strong>Benefits of upgrading to GC-VUV</strong></h4><div><div><div><div><div><p><strong>Hydrocarbon speciation</strong></p><ul><li>Distinguish paraffins, olefins, naphthenes, and aromatics (PONA) effortlessly</li><li>Eliminate misidentification errors common with FID and MS</li><li>Automate peak integration and classification</li></ul><div><div><div><div><div><p><strong>Trace impurity detection</strong></p><ul><li>Detect sulfur, nitrogen, and oxygen compounds at trace levels</li><li>Ensure compliance with regulatory standards in fuels and pharmaceuticals</li><li>Identify unknown contaminants in a single run</li></ul><div><div><div><div><div><p><strong>Analysis and workload</strong></p><ul><li>Decrease complex calibration standards requirement</li><li>Automated spectral deconvolution = less manual processing</li><li>Improved lab efficiency and throughput</li></ul><div><h3><strong>Which detector is right for you?</strong></h3><p>VGA-100 and LUMA detectors integrate seamlessly with the TRACE 1600 Series GC, offering plug-and-play installation, intuitive software, and superior analytical performance.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_VUV_Detector_for_TRACE_1600_Series_GC_2_f6a599c167.jpg" alt="Thermo Scientific  VUV Detector for TRACE 1600 Series GC." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_VUV_Detector_for_TRACE_1600_Series_GC_2_f6a599c167.jpg 245w," sizes="100vw" width="777" height="258"></p><blockquote><ul><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2177"><strong>VGA-100 detector</strong></a></li><li><strong>LUMA detector</strong></li></ul></blockquote></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div>

Thermo Scientific Triton Series Multicollector Thermal Ionization Mass Spectrometer (TIMS)

High-precision multicollector TIMS for demanding isotope ratio analysis, delivering exceptional sensitivity, stability, and accuracy for ultra-small and low-abundance samples.

<p><strong>The Thermo Scientific™ Triton™ Series Multicollector Thermal Ionization Mass Spectrometer (TIMS) is a high-precision platform designed for the most demanding isotope ratio measurements. Built on more than two decades of continuous development, the Triton Series combines field-proven TIMS performance with state-of-the-art detection and ion-optical technologies to deliver exceptional accuracy, stability, and sensitivity—especially for small samples and low-abundance isotopes.</strong></p><p>At the heart of the Triton Series is a <strong>high-stability thermal ionization source</strong>, optimized for maximum ion transmission and minimal kinetic energy spread. This ensures highly reproducible ion beams for both single- and double-filament techniques, enabling precise isotope ratio analysis across a wide range of elements and applications.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Triton_Series_Multicollector_Thermal_Ionization_Mass_Spectrometer_TIMS_2_e9fa5e958e.jpg" alt="Thermo Scientific Triton Series Multicollector Thermal Ionization Mass Spectrometer (TIMS)" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Triton_Series_Multicollector_Thermal_Ionization_Mass_Spectrometer_TIMS_2_e9fa5e958e.jpg 182w," sizes="100vw" width="650" height="558"></p><h3><strong>Advanced detection and ion optics</strong></h3><p>The Triton Series integrates multiple complementary detector technologies to address diverse analytical challenges:</p><ul><li><strong>10¹³ Ω Amplifier Technology</strong> extends the lower detection limits, delivering faster response times, extremely low noise, and significantly improved internal precision for small ion beams.</li><li><strong>Retarding Potential Quadrupole (RPQ) lenses</strong> provide exceptional abundance sensitivity by suppressing scattered ions and mass tailing, enabling accurate quantification of minor isotopes even next to intense ion beams.</li><li><strong>Multi Ion Counting (MIC) packages</strong> allow simultaneous detection of the lowest-intensity ion beams using SEM and CDD ion counters, with flexible configurations tailored to nuclear, geochronological, and geochemical applications.</li><li><strong>Stable, linear SEM and CDD ion counters</strong> ensure reliable measurements for ultra-low sample amounts and rare isotopes.</li><li><strong>High-performance Faraday cups</strong> guarantee uniform response, long operational lifetime, and excellent linearity for high-precision static and dynamic measurements.</li><li><strong>Movable multicollector array</strong> supports up to nine Faraday cups with precise alignment over a wide mass range, extendable to static Ca and Li isotope measurements.</li><li><strong>Virtual amplifier technology</strong> enables cancellation of gain factor uncertainties through amplifier rotation, achieving low-ppm external reproducibility in efficient static measurement modes.</li></ul><h3><strong>Designed for the most demanding isotope ratio applications</strong></h3><p>The Triton Series is ideally suited for applications where ultimate precision and high abundance sensitivity are essential, including:</p><ul><li>Radiogenic and stable isotope geochemistry</li><li>Geochronology (U–Pb, Pb–Pb, Rb–Sr, Sm–Nd, Lu–Hf systems)</li><li>Nuclear safeguards and nuclear forensic isotope analysis</li><li>Environmental and cosmochemical research</li><li>Analysis of ultra-small sample amounts and isotopically scarce materials</li></ul><p>Available in configurations such as <strong>Triton XT</strong> and <strong>Triton Plus</strong>, tailored to different performance priorities within high-precision isotope ratio analysis, the Thermo Scientific Triton Series TIMS offers a flexible, future-proof solution that continues to set the benchmark for thermal ionization mass spectrometry.</p>

Thermo Scientific ConFlo IV Universal Continuous Flow Interface

Universal continuous flow interface for IRMS enabling automated multi-device control, higher throughput, lower costs, and stable, unattended isotope analysis.

<p><strong>Thermo Scientific™ ConFlo IV Universal Continuous Flow Interface is a versatile continuous flow interface designed to significantly expand the application range of stable isotope laboratories using isotope ratio mass spectrometry (IRMS). The ConFlo IV system enables seamless connection of multiple sample preparation devices, delivering fully automated, stable, and highly reproducible measurements.</strong></p><p>The system features <strong>intelligent management of all required reference gases, automatic sample-size recognition, precise matching of sample and reference signals, and advanced self-diagnostics</strong>. These capabilities reduce operator involvement, lower operating costs, and increase overall laboratory throughput.</p><h3><strong>Key features</strong></h3><ul><li><strong>Management of multiple devices</strong><br>Automated switching between different sample preparation units, including activation, deactivation, and reference gas changes, maximizes IRMS utilization.</li><li><strong>Continuous, unattended operation</strong><br>Application switching can occur at any time without operator intervention; preparation devices can be regenerated and reloaded while other analyses are running.</li><li><strong>Maximized performance and efficiency</strong><br>Using reference gases instead of bulk reference materials reduces operating costs by nearly 50 % while increasing sample throughput by almost 50 %.</li><li><strong>Enhanced accuracy and stability</strong><br>Automatic adjustment of reference gas pulse intensities equalizes conditions between sample and reference gases, improving precision and long-term reliability.</li><li><strong>Advanced data quality control</strong><br>Critical system parameters affecting data quality are automatically monitored across all sample sequences.</li><li><strong>Single-interface control</strong><br>All connected preparation and inlet devices are controlled through one interface, with the ability to add new samples or entirely new applications without interrupting ongoing data acquisition.</li></ul>

Thermo Scientific DELTA Q Isotope Ratio Mass Spectrometer

High-performance IRMS combining exceptional sensitivity, robust design, and intuitive Qtegra ISDS software for food authenticity, environmental, forensic, and research isotope applications.

<p><strong>The Thermo Scientific™ DELTA™ Q Isotope Ratio Mass Spectrometer (IRMS) represents a new evolutionary step in isotope ratio analysis, combining outstanding analytical performance with intuitive operation powered by </strong><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1489"><strong>Qtegra™ Intelligent Scientific Data Solution (ISDS)</strong></a><strong> software.&nbsp;</strong></p><p>The DELTA Q IRMS is designed for seamless integration with a wide range of Thermo Scientific peripherals, making it a highly flexible platform for applications such as <strong>food authenticity testing, environmental and forensic analysis, doping control, and advanced scientific research</strong>.</p><h4><strong>Outstanding sensitivity</strong></h4><ul><li>Sensitivities of up to <strong>800 molecules per CO₂ ion</strong> in dual-inlet mode and <strong>1,000 molecules per ion</strong> in continuous-flow mode.</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_DELTA_Q_Isotope_Ratio_Mass_Spectrometer_2_671e47510f.jpg" alt="Thermo Scientific DELTA Q Isotope Ratio Mass Spectrometer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_DELTA_Q_Isotope_Ratio_Mass_Spectrometer_2_671e47510f.jpg 197w," sizes="100vw" width="650" height="517"></p><h4><strong>Versatility for diverse applications</strong></h4><ul><li>Support for up to <strong>10 collectors</strong> in multiple configurations, covering all IRMS applications up to <strong>m/z 96</strong>.</li><li><strong>Simultaneous mass range up to ±25%</strong>, enabling efficient multi-isotope measurements.</li><li>Compatibility with <strong>preconcentrators, elemental analyzers, GC interfaces, LC interfaces</strong>, and continuous-flow inlets.</li><li><strong>On-line H₂ capability</strong> for hydrogen isotope analysis.</li></ul><h4><strong>Highly robust and reliable design</strong></h4><ul><li>A <strong>monolithic analyzer</strong> with fixed alignment of all ion-optical components, including the electromagnet, ensuring exceptional long-term stability and robustness.</li><li>Integrated signal amplifiers and digitizers minimize external connections and increase reliability.</li><li>Fixed-position ion optics eliminate the need for realignment during installation or routine maintenance.</li><li>Optimized pumping strategy enables <strong>single-stage turbo pumping</strong> for all standard continuous-flow applications.</li><li>Comprehensive, automated diagnostics driven by <strong>Qtegra ISDS software</strong> support continuous performance monitoring.</li></ul><h4><strong>Compact and user-friendly design</strong></h4><ul><li>Compact footprint requiring minimal laboratory space.</li><li>Dedicated space for online peripherals on top of the instrument.</li><li>Dual inlet, µ-volume, and multiport interfaces are neatly integrated inside the system.</li><li>Continuous-flow interfaces can be fully controlled from the front panel.</li><li>All pumps are located internally, reducing noise and laboratory clutter.</li></ul><h4><strong>Qtegra™ ISDS Software</strong></h4><ul><li>Significantly increases laboratory productivity with <strong>automatic Get Ready functionality</strong>, ready-to-use templates, and built-in quality control tools.</li><li>Intelligent, optimized workflows guide users from sample to result while allowing flexible switching between system configurations.</li><li>Ensures full <strong>data integrity and traceability</strong> for raw data, metadata, and reported results.</li></ul><h4><strong>ACT label certification</strong></h4><p>The DELTA Q IRMS is certified with the <strong>ACT Environmental Impact Label</strong> from My Green Lab, providing transparent, third-party verified information on environmental impact across manufacturing, energy and water use, packaging, and end-of-life considerations—supporting sustainable laboratory procurement and reduced carbon footprint.</p>

Thermo Scientific Prima PRO Process Mass Spectrometer

Thermo Scientific™ Prima PRO is a highly reliable process analyzer designed for fast, precise multi-stream analysis in industrial processes. It delivers high analytical accuracy, stability, and robust performance in demanding process control applications.

<p><strong>The Thermo Scientific™ Prima PRO Process Mass Spectrometer is a highly reliable and versatile gas analyzer designed for fast, precise, multi-stream gas analysis in industrial process environments. Utilizing scanning magnetic sector technology, the system delivers superior analytical accuracy, long calibration intervals, and strong resistance to contamination. These capabilities make it suitable for demanding process control applications across the chemical, petrochemical, biotechnology, semiconductor, and steel industries.</strong></p><p>The integrated Rapid Multi-Stream Sampler (RMS) inlet system enables selection from up to <strong>127 process streams</strong>, allowing a single analyzer to replace multiple gas chromatographs while maintaining high sampling frequency. The intuitive touchscreen interface, configurable user permissions, and flexible model configurations support efficient operation, regulatory compliance, and scalable deployment across diverse industrial workflows.</p><h4><strong>Key features</strong></h4><ul><li><strong>High-precision scanning magnetic sector technology</strong> for real-time gas analysis</li><li><strong>Rapid Multi-Stream Sampling (RMS)</strong> system for up to 127 process streams</li><li><strong>Programmable analytical methods</strong> with universal detector capability</li><li><strong>Optional Variable Pressure Inlet</strong> (1000 mbar to 0.3 mbar) for flexible integration</li><li><strong>Intuitive touchscreen interface</strong> with real-time data visualization</li><li><strong>Advanced security </strong>with multi-role user permissions</li><li><strong>Scalable configurations</strong> for diverse industrial applications</li></ul><h4><strong>Technical specifications</strong></h4><ul><li><strong>Analysis time: </strong>0.3–1.0 s per gas component</li><li><strong>Analyzer type: </strong>Scanning laminated electromagnet, 6 cm radius, 80° deflection</li><li><strong>Area classification:</strong> ATEX / IECEx / UKEx Zone 1 and Zone 2 T3</li><li><strong>Detector: </strong>Faraday and optional Faraday/SEM dual detector</li><li><strong>Dynamic range: </strong>1 ppm – 100% (application dependent)</li><li><strong>Power: </strong>115/230 VAC</li><li><strong>Precision: </strong>Better than 0.1% relative over 24 h</li><li><strong>Resolution: </strong>Switchable collector slits; standard resolving powers 60 (1 mm) and 20 (4 mm); optional higher resolutions</li><li><strong>Stability:</strong> Better than 10% relative over one month</li><li><strong>User interface:&nbsp;</strong><ul style="list-style-type:circle;"><li><strong>Prima PRO 710:&nbsp;</strong>Color touchscreen GUI</li><li><strong>Prima PRO 700:&nbsp;</strong>None (remote operation)</li></ul></li><li><strong>Ambient temperature:</strong> 12–42 °C</li><li><strong>Mass range:</strong> 1–200 amu</li></ul>

Thermo Scientific ITEX Dynamic Headspace Tool 

Thermo Scientific ITEX Dynamic Headspace Tool enables automated VOC enrichment with ppt sensitivity using dynamic headspace for GC workflows.

<p><strong>The Thermo Scientific™ ITEX Dynamic Headspace Tool is an autosampler accessory for the</strong><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/63"><strong> TriPlus™ RSH </strong></a><strong>and </strong><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/422"><strong>TriPlus RSH SMART</strong></a><strong> Autosamplers designed for the enrichment of volatile organic compounds (VOCs) using dynamic headspace technology. It enables ppt-level sensitivity and allows sample enrichment to be easily integrated into an automated gas chromatography (GC) workflow.</strong></p><ul><li>The ITEX-DHS technique uses a gas-tight syringe to collect the headspace and a microtrap inside the syringe needle to efficiently trap and concentrate VOCs through repeated syringe strokes.&nbsp;</li><li>Sensitivity can be scaled according to the number of strokes, making the method suitable for both low- and high-concentration samples.&nbsp;</li><li>The system is designed for easy method set-up with only a few parameters, simple access to the trap, and excellent robustness for long-term operation.&nbsp;</li><li>A closed system removes any risk of breakthrough.&nbsp;</li><li>Independent trap desorption temperature and flow control maximize desorption efficiency without affecting GC inlet settings.&nbsp;</li><li>When used with the TriPlus RSH SMART autosampler, the SMART gas-tight syringe enables automatic usage traceability.&nbsp;</li><li>The entire automated workflow can be fully controlled through <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/76"><strong>Thermo Scientific™ Chromeleon™ CDS</strong></a>.</li></ul><p>For VOC analysis in many liquid and solid samples, ITEX offers a valuable alternative to classical enrichment techniques by combining ease of use with robust performance.</p><h3><strong>Key features</strong></h3><ul><li>Dynamic headspace VOC enrichment with<strong> ppt-level sensitivity</strong></li><li><strong>Easy integration</strong> into automated GC workflows</li><li><strong>Gas-tight syringe and microtrap</strong> in the needle for efficient analyte concentration</li><li><strong>Scalable sensitivity</strong> based on the number of syringe strokes</li><li><strong>Easy method set-up</strong> with few parameters</li><li><strong>Robust design </strong>for long-term operation</li><li><strong>Closed system</strong> minimizing the risk of breakthrough</li><li><strong>Independent desorption</strong> temperature and flow control</li><li><strong>Automatic usage</strong> traceability with SMART gas-tight syringe</li><li>Full control through <strong>Chromeleon CDS</strong></li></ul><h3><strong>Technical specifications</strong></h3><ul><li><strong>Description: </strong>includes SMART gas-tight syringe, focusing trap, built-in trap heating, cooling fan, and trap cleaning capability</li><li><strong>Application: </strong>enrichment of volatile organic compounds (VOCs)</li><li><strong>Compatible equipment: </strong><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/63"><strong>TriPlus RSH</strong></a> and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/422"><strong>TriPlus RSH SMART </strong></a>Autosamplers</li><li><strong>Type:</strong> autosampler accessory</li><li><strong>Unit size: </strong>each</li></ul>

Related content

Wiley releases the 2026 edition of the Wiley Registry of Mass Spectral Data to expand GC-MS identification intelligence

SPE Troubleshooting: Understanding and Resolving Low Recovery in Solid Phase Extraction

News from LabRulezGCMS Library - Week 22, 2026