Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 25th May 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application note by Shimadzu, presentation by MDCW / University of Washington and poster by Waters Corporation!<h3>1. MDCW / University of Washington: Implementing Tile-Based Fisher Ratio Analysis of GC×GC-TOFMS Data to Obtain a Master Peak Table of All Detected Analyte Compounds in Many Petroleum-Based Samples</h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_9_Halvorsen_136808e314.pdf">Full PDF for download</a></li></ul><section><div><div><div><div><div><div>This presentation describes the development of a new chemometric workflow for processing GC×GC-TOFMS (comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry) data from petroleum-derived fuels. The work was conducted by researchers from the University of Washington in collaboration with Chevron Technical Center and focuses on creating a comprehensive Master Peak Table (MPT) containing all detectable analytes across multiple fuel sample classes. The motivation was that moving from conventional GC to GC×GC dramatically increased chromatographic peak capacity and resolution, but also created a need for more sophisticated data analysis methods capable of handling the much larger number of detected compounds.The analytical platform employed <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/37">GC×GC-TOFMS</a> with a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1289">thermal-flow modulator</a> and a TOF mass spectrometer detector. Fuel samples were analyzed using an Rxi-1 column (30 m × 0.25 mm × 0.25 μm) in the first dimension and an Rxi-17MS column (2.0 m × 0.18 mm × 0.20 μm) in the second dimension. The sample set included multiple petroleum products such as hydrobates, reformates, naphthas, FCC gasoline, and blank samples. Log-scale chromatograms revealed numerous late-eluting trace compounds and significant compositional differences between fuel batches that were not readily visible in conventional chromatographic representations.To process these highly complex datasets, the researchers implemented a tile-based Fisher Ratio (F-ratio) chemometric approach using <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/348">ChromaTOF Tile software</a>. The method divides GC×GC chromatograms into small tiles and identifies regions where analyte signals differ significantly between sample classes by comparing between-class and within-class variance. Instead of relying solely on F-ratio ranking, the workflow incorporates statistical testing against blank samples. Three blank chromatograms were used to establish tile-specific confidence intervals and p-test thresholds, allowing the system to determine whether detected signals represent genuine compounds rather than background noise. This strategy enabled the creation of a unified master peak table while minimizing problems caused by retention-time shifts and reducing the need for manual user intervention.Application of the method generated 719 statistically significant analyte hits across the fuel classes and demonstrated excellent reproducibility, with only 6.3% of classifications showing inconsistent behavior among replicates. Detected compounds included hydrocarbons and aromatic species such as 1-methylnaphthalene, 1,2,4-trimethylbenzene, β-vatirenene, 2-octene, and tetramethylheptadecane, whose occurrence patterns aligned well with expected fuel chemistry. The resulting master peak table contained both shared and sample-specific compounds and provided a much more comprehensive representation of petroleum composition than conventional workflows. The authors conclude that the approach should be broadly applicable to other complex sample types and could be extended using alternative chemometric metrics beyond Fisher Ratio analysis to address different experimental objectives.<h3>2. Shimadzu: A Simple Method for Determination of β-Sitosterol as a Marker of Vegetable Oil Adulteration in Ghee by GC</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_06_sip_gc_042_en_f4c307005b.pdf">Full PDF for download</a></li></ul><h5>User Benefits</h5><ul><li>ShimadzuNexis GC-2030 can be effectivelyused for determination of adulteration of Ghee with vegetable oil.</li><li>The NexisGC-2030 easily meets the acceptancecriteria as per the proposed FSSAI method no.01.097:2022.</li><li>This method is suitable for routine food industry analysis and academic research.</li></ul>The most common milk product in Indian cuisine is ghee or clarified butter. Due to its high cost, ghee is adulterated with vegetable oil, to gain commercial benefits. β-sitosterol, a common phytosterol, found in a variety of natural sources, including vegetable fat or oil from plants (Figure 1). It is used as a marker of vegetable oil adulteration in ghee1.The primary goal of this study is to assess the vegetable oil adulteration in ghee by analyzing β-Sitosterol as a marker using gas chromatography (GC). This will establish a foundation for the rapid detection of ghee adulteration. In this study, a simple, sensitive, and inexpensive method is developed for extraction of β-Sitosterol from ghee which is then subjected to gas chromatography with flame ionization detection for quantitation. The effects of several important parameters influencing the extraction efficiencies of β-Sitosterol including water-immiscible organic solvent (type and volume), volume of water, sonication time, surfactant (type and concentration), and organic modifier (type and volume) were investigated. This method is ideal for routine analysis in the food industry during the manufacturing, processing, and commercial testing of milk fat samples, or for academic research purposes.<h4>&nbsp;Sample Preparation and Analysis Conditions</h4>Standard and sample preparations were conducted following the guidelines outlined in the proposed FSSAI method No. 01.097:20222. The analysis was performed using a Shimadzu <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexis+GC-2030">Nexis GC-2030</a> equipped with a Flame Ionization Detector (FID), as shown in Figure 2. The specific configuration and analytical conditions used during the study are provided in Table 1.<h4>Conclusion&nbsp;</h4>A gas chromatography–based method using GC-2030 was developed for the estimation of β-Sitosterol in ghee. The method exhibits a detection limit of 2 %, enabling the identification of vegetable oil adulteration in ghee at levels as low as 2 %. At this adulteration level, the signal of β-Sitosterol achieved a signal-to-noise (S/N) greater than 3, confirming the reliability of detection at the established limit. This method provides a reliable and effective approach for the quantification of β-Sitosterol, which serves as a marker for vegetable oil adulteration in ghee.<h3>3. Waters Corporation: Multidimensional Characterization of Short Chain Chlorinated Paraffins (SCCPs) with GC-APCI and Cyclic Ion Mobility</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/720009386_3232568115.pdf">Full PDF for download</a></li></ul>This poster presents a multidimensional analytical approach for the characterization of short-chain chlorinated paraffins (SCCPs), a class of persistent environmental pollutants included in the Stockholm Convention due to their environmental persistence and bioaccumulation potential. SCCPs are highly complex mixtures of chlorinated hydrocarbons containing thousands of possible congeners, making their analysis particularly challenging. The study evaluates the use of gas chromatography coupled with atmospheric pressure chemical ionization, cyclic ion mobility spectrometry, and high-resolution mass spectrometry (GC-APCI-IMS-HRMS) as a powerful platform for improved SCCP characterization.The analytical instrumentation consisted of a modified <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8890">Agilent 8890 gas chromatograph</a> equipped with an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=7&amp;search=Rxi-5SilMS">Rxi-5SilMS capillary column</a> (30 m × 0.25 mm × 0.25 μm) and connected to a <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/202">Waters SELECT SERIES Cyclic IMS</a> high-resolution mass spectrometer using an Atmospheric Pressure GC (APGC) ion source. Unlike conventional electron ionization methods, APCI was operated in negative-ion mode with a chloroform modifier, promoting the formation of characteristic [M+Cl]⁻ molecular ions. This significantly reduced fragmentation and provided strong molecular-ion signals, improving both qualitative identification and quantitative analysis of SCCP homologues.Using three commercial SCCP technical mixtures (51.5%, 55%, and 63% chlorine content), the researchers demonstrated that GC-APCI-HRMS could selectively detect SCCP homologues according to carbon-chain length and degree of chlorination. Although substantial chromatographic overlap was observed among many homologues, the addition of ion mobility spectrometry (IMS) introduced a valuable extra separation dimension. Distinct drift-time versus m/z trendlines were observed for compounds sharing the same number of chlorine atoms, allowing homologues to be grouped and characterized more effectively than by chromatographic retention and mass spectrometry alone. The IMS data also enabled estimation of the relative abundance of individual homologue groups within each technical mixture.The authors further explored the resolving power of the cyclic IMS device by employing multiple ion-mobility passes (up to eight cycles) to investigate individual SCCP congeners. While complete separation of individual congeners within a homologue group was not achieved, higher ion-mobility resolution revealed measurable differences between early- and late-eluting species and provided additional insight into compositional differences among SCCP mixtures. The study concludes that combining GC-APCI, cyclic ion mobility spectrometry, and high-resolution mass spectrometry offers a powerful multidimensional workflow for the characterization of complex chlorinated paraffin mixtures and may improve environmental monitoring and future regulatory analysis of these challenging contaminants.</div></div></div></div></div></div></section>

News from LabRulezGCMS Library - Week 22, 2026

Low analyte recovery is one of the most common challenges encountered during Solid Phase Extraction (SPE) sample preparation. In this Phenomenex Video Tip, Genevie Hodson, Senior Manager of Technical Support and Applications at Phenomenex, explains a practical troubleshooting approach for situations where analyte recovery after an <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products?category=6&amp;manufacturerItems=50">SPE </a>procedure is lower than expected.The key objective of troubleshooting is not simply to identify that recovery is low, but to determine exactly where the analyte was lost during the extraction process. Once the point of loss has been identified, corrective actions can be implemented systematically.<h3>Fundamental Principle of SPE Recovery Troubleshooting</h3><h4>Determine Where the Analyte Is Going</h4>The most important step when troubleshooting low recovery is to identify the location of the missing analyte.The process begins with the assumption that the sample originally contained 100% of the target analyte. If the final recovery is lower than expected, some portion of the analyte has been lost during SPE processing.To identify the loss point, each fraction generated during the SPE procedure must be collected and analyzed separately.<h5>Fractions to Collect</h5>During the SPE workflow, the following fractions should be collected individually:<ul><li>Load fraction (flow-through)</li><li>Wash fraction(s)</li><li>Elution fraction</li></ul>Each collected fraction is transferred into a vial and analyzed using the laboratory’s analytical method.The analytical results reveal whether the analyte is:<ul><li>Present in the load fraction</li><li>Present in one of the wash fractions</li><li>Present in the elution fraction</li><li>Missing from all collected fractions</li></ul>The location of the analyte provides direct information about the root cause of the recovery problem and guides the next troubleshooting steps.<h4>Scenario 1: Analyte Detected in the Load Fraction</h4><h5>What It Means</h5><ul><li>If the analyte appears in the load fraction, it was not retained by the SPE sorbent during sample loading.</li><li>Instead of binding to the stationary phase, the analyte passed directly through the cartridge.</li></ul><h5>Possible Causes</h5><ol><li>Incorrect Phase Selection</li></ol><ul><li>The selected SPE sorbent may not be appropriate for the analyte being extracted.</li><li>If the analyte cannot interact effectively with the sorbent chemistry, retention will not occur.</li></ul><ol start="2"><li>Excessively Strong Sample Solvent</li></ol><ul><li>The sample may be dissolved in a solvent that is too strong.</li><li>A strong sample solvent can prevent proper interaction between the analyte and the sorbent, causing breakthrough during loading.</li></ul><ol start="3"><li>Incorrect pH Conditions</li></ol><ul><li>Retention often depends on maintaining the analyte in the correct ionization state.</li><li>If the sample pH is not appropriate, the analyte may not interact correctly with the sorbent and therefore will not be retained.</li></ul><ol start="4"><li>Sorbent Overload</li></ol><ul><li>The SPE cartridge may have received:<ul><li>Too much analyte</li><li>Too much sample matrix</li></ul></li><li>When sorbent capacity is exceeded, analytes can break through the cartridge and appear in the load fraction.</li></ul><h5>Corrective Action</h5>When overload is suspected, increasing the amount of sorbent can improve analyte retention and prevent breakthrough.<h4>Scenario 2: Analyte Detected in the Wash Fraction</h4><h5>What It Means</h5>If the analyte appears in the wash fraction, it was initially retained but subsequently removed during the washing step.<h5>Possible Causes</h5><ol><li>Wash Solvent Too Strong</li></ol><ul><li>The most common cause is an overly aggressive wash solvent.</li><li>A wash solution with excessive elution strength can remove the analyte before the intended elution step.</li></ul><ol start="2"><li>Incorrect pH During Washing</li></ol><ul><li>When pH control is required for retention, the same conditions must be maintained throughout the process.</li><li>A pH change during washing may alter analyte retention and cause premature elution.</li></ul><h5>Corrective Action</h5>Review:<ul><li>Wash solvent composition</li><li>Wash solvent strength</li><li>pH conditions during washing</li></ul>Adjustments should ensure that the analyte remains retained until the elution step.<h4>Scenario 3: Analyte Missing from All Fractions</h4><h5>What It Means</h5><ul><li>If the analyte is not found in the load fraction, wash fractions, or elution fraction, it is likely still retained on the SPE sorbent.</li><li>In this situation, the analyte has not been effectively eluted from the cartridge.</li></ul><h5>Possible Cause</h5>Elution Solvent Not Strong Enough<ul><li>The final elution solvent may lack sufficient strength to remove the analyte from the sorbent.</li><li>As a result, the analyte remains bound to the stationary phase and never reaches the collection vial.</li></ul><h4>Corrective Action</h4><ul><li>Increase the strength of the elution solvent during the final SPE elution step.</li><li>A stronger solvent can improve analyte desorption and recovery.</li></ul><h3>Summary of Low Recovery Troubleshooting Strategy</h3>The recommended troubleshooting workflow consists of four steps:<h4>1. Collect All SPE Fractions</h4>Gather:<ul><li>Load fraction</li><li>Wash fraction(s)</li><li>Elution fraction</li></ul><h4>2. Analyze Each Fraction Separately</h4>Use the analytical method to determine where the analyte is located.<h4>3. Identify the Root Cause</h4><div><div><h5>Analyte Location&nbsp;&nbsp;/&nbsp;&nbsp;Likely Cause</h5><ul><li>Load fraction: Incorrect phase, strong sample solvent, incorrect pH, sorbent overload</li><li>Wash fraction: Wash solvent too strong, incorrect pH</li><li>Not found in any fraction: Incomplete elution from sorbent</li></ul></div></div><h4>4. Apply Corrective Measures</h4>Modify:<ul><li>Sorbent selection</li><li>Sample solvent composition</li><li>pH conditions</li><li>Sorbent amount</li><li>Wash solvent strength</li><li>Elution solvent strength</li></ul><h3>Other Common SPE Issues</h3>In addition to low recovery, several other SPE-related problems are commonly encountered.These include:<ul><li>Contamination</li><li>Reproducibility Problems</li><li>Flow-Related Issues</li></ul><h3>Conclusion</h3>Successful troubleshooting of low SPE recovery depends on identifying where the analyte is lost during the extraction process. Collecting and analyzing individual SPE fractions provides a systematic method for locating the analyte and determining the underlying cause of poor recovery.Whether the analyte passes through during loading, elutes during washing, or remains bound to the sorbent after extraction, fraction-based investigation enables targeted corrective actions. This structured approach allows SPE methods to be optimized efficiently and helps restore acceptable analyte recovery.

SPE Troubleshooting: Understanding and Resolving Low Recovery in Solid Phase Extraction

New edition of the Wiley Registry of Mass Spectral Data expands compound coverage to over 915,500 reference spectra, strengthening a foundational layer of Wiley’s scientific data and research intelligence portfolio.Wiley, a global leader in authoritative content and research intelligence for the advancement of scientific discovery, innovation and learning, today released the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/887">Wiley Registry of Mass Spectral Data 2026</a>.<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Wiley_Registry_of_Mass_Spectral_Data_2026_bc408d8245.jpg" alt="Wiley: Registry of Mass Spectral Data 2026" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Wiley_Registry_of_Mass_Spectral_Data_2026_bc408d8245.jpg 110w," sizes="100vw" width="1527" height="2162">As AI-driven research pipelines become standard practice across pharmaceuticals, materials science and forensic investigation, the quality of reference data underpinning those pipelines determines whether results are trusted—or stall at the verification stage.The Wiley Registry of Mass Spectral Data 2026 addresses this issue directly: One of the world’s largest and most trusted mass spectral reference databases for identifying unknown chemical compounds, it is now expanded and validated to meet the analytical demands of modern, AI-assisted laboratory workflows.Laboratories face increasingly complex analytical challenges—from detecting emerging environmental contaminants to identifying novel substances in forensic investigations. As a result, having access to a comprehensive, rigorously validated spectral database has become foundational to getting results right. It is also a critical validation layer for AI-driven workflows.The Wiley Registry database helps scientists and researchers around the world with environmental testing, forensic investigation, food safety research, drug analysis, defense research, homeland security, and more, providing critical reference data for identifying and analyzing chemical compounds and materials.The new edition represents a significant expansion of the collection, which now contains more than 915,500 reference spectra—the unique chemical “signatures” used to identify substances—making it among the most comprehensive databases of its kind. More than 42,000 new GC-MS spectra representing 34,100 compounds have been added, with data from laboratories, world patents and peer-reviewed scientific literature. Each spectrum is validated to the same rigorous standard, ensuring that the data perform reliably whether a researcher is running a manual comparison or feeding it into an automated identification pipeline.The Wiley Registry is part of Wiley’s growing portfolio of scientific data and research intelligence solutions, which includes spectral databases, chemistry and materials literature, and analytical tools designed to support researchers and organizations from discovery through to applied outcomes. Wiley spectral database solutions are trusted by the world’s top pharmaceutical companies and many Fortune 500 organizations—reflecting Wiley’s mission to transform knowledge into actionable intelligence, equipping researchers with the rigorous reference data that drives real-world scientific discovery.Updated every three years, the Wiley Registry is among the company’s longest-standing data products, with a history spanning decades of continuous development.“The Wiley Registry is a foundational layer of intelligence for any laboratory conducting GC-MS analysis—and increasingly, for the AI-assisted workflows being built around that analysis,” said Armughan Rafat, Wiley senior vice president and chief AI &amp; data analytics officer. “By expanding compound coverage and applying consistent quality measures across the collection, we help analysts provide a deterministic layer to move from unknown to identified faster.”Available in the most common instrumentation manufacturer formats, the Wiley Registry of Mass Spectral Data 2026 also offers bundled options to access even more data with its <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/885">Wiley Registry/NIST</a> and the KnowItAll GC-MS Library collection for labs seeking the most comprehensive coverage and workflow integration. The Wiley Registry is also available as a KnowItAll subscription for continued access to new data as they are added to the collection.Spectral databases contain detailed “fingerprints” of substances captured through analytical techniques such as <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/934">mass spectrometry (MS)</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1271">Raman spectroscopy</a>, enabling researchers to identify unknown materials by comparing their spectral signatures against validated reference spectra. This data is essential for quality control, research verification and discovery across industries from pharmaceuticals to materials science.<blockquote>For more information about the Wiley Registry of Mass Spectral Data 2026, please <a target="_blank" rel="noopener noreferrer" href="https://sciencesolutions.wiley.com/solutions/technique/gc-ms/wiley-registry-of-mass-spectral-data/">visit this website</a>.</blockquote><h4>About Wiley</h4>Wiley (NYSE: WLY) is a global leader in authoritative content and research intelligence for the advancement of scientific discovery, innovation, and learning. With more than 200 years at the center of the scholarly ecosystem, Wiley combines trusted publishing heritage with AI-powered platforms to transform how knowledge is discovered, accessed, and applied. From individual researchers and students to Fortune 500 R&amp;D teams, Wiley enables the transformation of scientific breakthroughs into real-world impact. From knowledge to impact—Wiley is redefining what's possible in science and learning. Visit us at Wiley.com.

Wiley releases the 2026 edition of the Wiley Registry of Mass Spectral Data to expand GC-MS identification intelligence

Article

Product

Application

Academy

Presentation

Software

Video

Poster

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

For over 200 years we have been helping people and organizations develop the skills and knowledge they need to succeed.
We develop digital education, learning, assessment, and certification solutions to help universities, businesses, and individuals move between education and employment and achieve their ambitions.

Wiley

Organomation H Series Hydrogen Generator

The H Series Hydrogen Generator delivers up to 600 mL/min hydrogen with 99.9999% purity, advanced safety features, and scalable modular design.

The Organomation H Series Hydrogen Generator is a modular hydrogen generation system designed for GC, GC-MS (GC-MSD), and FAST GC applications. It is available in three models with flow rates of 200, 400, and 600 mL/min, delivering ultra-high purity hydrogen up to 99.9999%.The system uses HT PEM electrolytic cell technology, producing hydrogen on demand, minimizing internal gas storage and enhancing safety.A comprehensive safety system includes acoustic alarms, display messages, and automatic shutdown in case of gas leaks, with automatic switching to inert gas if hydrogen production stops.The generator features a touchscreen CPU, supports CAN-BUS and LAN connectivity, and allows real-time monitoring, diagnostics, and maintenance management. Up to four units can be connected in parallel for scalable performance.<h4>Key Features</h4><ul><li>Three models: 200 / 400 / 600 mL/min</li><li>Hydrogen purity up to 99.9999% (UHP)</li><li>HT PEM electrolytic cell technology</li><li>On-demand hydrogen production</li><li>Advanced safety system with alarms and auto shutdown</li><li>Automatic switch to inert gas</li><li>Removable water tank for easy maintenance</li><li>Low maintenance and low operating cost</li><li>Parallel connection of up to 4 units</li><li>Touchscreen CPU with CAN-BUS and LAN</li><li>Full monitoring of system status and alarms</li></ul><h4>Available Models</h4><h5>H Series 200</h5><ul><li>Flow rate: 200 mL/min ±10%</li><li>Power consumption: 110 W</li></ul><h5>H Series 400</h5><ul><li>Flow rate: 400 mL/min ±10%</li><li>Power consumption: 180 W</li></ul><h5>H Series 600</h5><ul><li>Flow rate: 600 mL/min ±10%</li><li>Power consumption: 250 W</li></ul><h4>Standard Features</h4><ul><li>HT PEM electrolytic cell</li><li>Touchscreen CPU</li><li>LAN connectivity</li><li>CAN-BUS communication</li><li>Removable water tank</li><li>Automatic water refill pump</li><li>Safety system with alarms and auto shutdown</li><li>Automatic inert gas switching</li><li>Modular stackable configuration</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Technology: HT PEM electrolytic cell</li><li>Purity: 99.9999%</li><li>Oxygen: &lt; 1 ppm</li><li>Dew point: &lt; -70°C</li><li>Output pressure: 2–8 bar (30–116 psi)</li><li>Max altitude: 2000 m</li><li>Noise: &lt; 50 dBA</li><li>Protection class: IP20</li></ul><h4>Electrical</h4><ul><li>115/230 V, 50–60 Hz</li><li>H200: 110 W</li><li>H400: 180 W</li><li>H600: 250 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–35 °C</li><li>Humidity: max 90% non-condensing</li></ul><h4>Water Requirements</h4><ul><li>Minimum resistivity: &gt;1 MΩ·cm (ASTM II)</li><li>Recommended: &lt;10 MΩ·cm (ASTM I)</li></ul><h4>Dimensions &amp; Weight</h4><ul><li>Dimensions: 47 × 38 × 53 cm</li><li>Weight: 30 kg</li></ul><h4>Connections</h4><ul><li>Hydrogen output: G 1/8" female (AISI 316)</li><li>Exhaust: 4 mm quick connector</li><li>Water input: 1/4" connection</li></ul><h4>Warranty</h4><ul><li>2 years</li></ul><h4>Accessories</h4><ul><li>Water demineralizer</li><li>Maintenance kit (9,000 / 18,000 hours)</li><li>Water refill pump</li></ul>

Organomation HG 2200 R Hydrogen Generator

The Organomation HG 2200 R delivers up to 200 mL/min hydrogen with >99.999% purity, low noise, and easy maintenance for THC analyzers.

The Organomation HG 2200 R is a compact hydrogen generator designed for THC and emission monitoring analyzers. It delivers flow rates up to 200 mL/min with hydrogen purity greater than 99.999%, and oxygen content below 0.1 ppm when used with additional purifiers.The unit allows adjustable outlet pressure from 1 to 4 bar (up to 6 bar on demand) and features a removable external water tank for easy maintenance. An automatic water loading pump supports continuous operation.<h4>Key Features</h4><ul><li>Hydrogen flow up to 200 mL/min</li><li>Purity &gt;99.999% (UHP)</li><li>O₂ &lt;0.1 ppm with additional purifier</li><li>Adjustable outlet pressure: 1–4 bar (up to 6 bar)</li><li>Removable water tank for easy cleaning</li><li>Optional continuous water supply (pump)</li><li>Low noise level &lt;46 dB</li><li>Compact benchtop design</li><li>Simple operation and maintenance</li></ul><h4>Standard Features</h4><ul><li>UHP hydrogen generation (&gt;99.999%)</li><li>Pressure control via keyboard</li><li>Removable water tank</li><li>External water supply capability</li><li>Integrated dryer with molecular sieve</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Model: HG 2200 R</li><li>Flow rate: 200 mL/min</li><li>Purity: &gt;99.999%</li><li>Oxygen content: &lt;0.1 ppm (with purifier)</li></ul><h4>Output Pressure</h4><ul><li>Standard: 1–4 bar</li><li>Maximum: 6 bar (on request)</li></ul><h4>Electrical</h4><ul><li>115/230 V, 50–60 Hz</li><li>Power rating: 100 VA</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li><li>Noise level: &lt;46 dB</li></ul><h4>Water Requirements</h4><ul><li>Demineralized water ≤ 5 µS/cm (~0.2 MΩ·cm)</li></ul><h4>Consumables</h4><ul><li>Dryer with molecular sieve</li></ul><h4>Dimensions &amp; Weight</h4><ul><li>Dimensions: 31 × 48 × 38 cm</li><li>Weight: 20 kg</li></ul><h4>Warranty</h4><ul><li>1 year</li></ul><h4>Accessories / Options</h4><ul><li>Additional purifiers for ultra-low O₂</li><li>Water refill pump</li></ul>

Organomation NiGen Micro Nitrogen Generator

The Organomation NiGen Micro delivers up to 4 L/min nitrogen with 99.5% purity, PSA technology, and scalable modular configuration.

The Organomation NiGen Micro is a compact nitrogen generator based on PSA (Pressure Swing Adsorption) technology, designed for laboratory applications requiring a stable nitrogen supply up to 4 L/min with purity up to 99.5%.The system is designed for plug &amp; play integration with the AirComp oil-free compressor (Brezza series) and supports parallel connection of up to four units for increased capacity.It features a CPU with touchscreen display, with CAN-BUS and Ethernet connectivity, enabling real-time monitoring, diagnostics, alarm reporting, and maintenance control.<h4>Key Features</h4><ul><li>Nitrogen flow up to 4 L/min</li><li>Purity up to 99.5%</li><li>PSA technology with Fast Purity process</li><li>Rapid high-purity nitrogen generation</li><li>Plug &amp; play integration with AirComp compressor</li><li>Parallel connection of up to 4 units</li><li>Touchscreen CPU with CAN-BUS communication</li><li>Ethernet connection for PC integration</li><li>Low noise operation (&lt;50 dBA)</li><li>Compact modular design</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator (Claind Fast Purity technology)</li><li>Touchscreen CPU</li><li>CAN-BUS communication</li><li>Ethernet interface</li><li>Modular stackable configuration</li><li>Compatibility with AirComp compressor</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Model: NiGen Micro</li><li>Flow rate: 4 L/min</li><li>Purity: up to 99.5%</li><li>Technology: PSA (Pressure Swing Adsorption)</li></ul><h4>Output Parameters</h4><ul><li>Pressure: 0–6 bar (0–87 psi)</li><li>Dew point: &lt; -50 °C (±2 °C)</li></ul><h4>Air Input Requirements</h4><ul><li>Particles: ≤ 0.01 µm</li><li>Oil vapors: ≤ 0.01 mg/m³</li><li>Moisture: ≤ 3 °C dew point</li><li>Minimum pressure: 8 bar</li><li>Minimum flow: 18 L/min</li></ul><h4>Electrical</h4><ul><li>115/230 V, 50–60 Hz</li><li>Power consumption: 50 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–35 °C</li><li>Humidity: max 90% non-condensing</li><li>Max altitude: 2000 m</li></ul><h4>Noise</h4><ul><li>&lt;50 dBA (98% of operation)</li><li>&lt;60 dBA (short peaks)</li></ul><h4>Dimensions &amp; Weight</h4><ul><li>Dimensions: 47 × 38 × 53 cm</li><li>Weight: 28 kg</li></ul><h4>Connections</h4><ul><li>Compressed air inlet: G 1/8" female</li><li>Nitrogen outlet: G 1/8" female</li></ul><h4>Warranty</h4><ul><li>2 years</li></ul><h4>Accessories</h4><ul><li>AirComp oil-free compressor (Brezza series)</li><li>CPU interface (Brezza version)</li><li>Installation kit</li><li>Maintenance kit (8,000 / 16,000 hours)</li></ul>

Organomation NITRO Nitrogen Generator

The Organomation NITRO 35/70 delivers up to 70 L/min nitrogen with 99.99% purity, PSA technology, remote monitoring, and integrated storage.

The Organomation NITRO (NiGen Nitro 35 / 70) is a high-performance nitrogen generator based on PSA technology, designed for applications requiring flow rates up to 70 L/min and purity up to 99.99%.It is available in two models:<ul><li>NITRO 35 – up to 35 L/min</li><li>NITRO 70 – up to 70 L/min</li></ul>The system delivers a dew point below -50 °C and hydrocarbon levels below 0.01 ppm, making it suitable for demanding applications such as LC/MS.An integrated 24 L internal tank ensures stable nitrogen supply and reduces downtime. The unit features a touchscreen display, supports remote access via Claind4You, and enables full system integration using MODBUS, MQTT, and HTTPS protocols.<h4>Key Features</h4><ul><li>Two models: 35 and 70 L/min</li><li>Nitrogen purity up to 99.99%</li><li>Dew point &lt; -50 °C</li><li>Hydrocarbon content &lt; 0.01 ppm</li><li>PSA (Pressure Swing Adsorption) technology</li><li>24 L internal storage tank</li><li>Touchscreen display with monitoring and alerts</li><li>Remote control via Claind4You</li><li>Integration via MODBUS, MQTT, HTTPS</li><li>Automatic operation with leak detection</li><li>Mobile design with wheels</li><li>Reliable continuous operation</li></ul><h4>Available Models</h4><h5>NITRO 35</h5><ul><li>Flow rate: up to 35 L/min</li><li>Weight: 75 kg</li></ul><h5>NITRO 70</h5><ul><li>Flow rate: up to 70 L/min</li><li>Weight: 90 kg</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator (Claind technology)</li><li>Touchscreen display</li><li>Automatic operation with alarms</li><li>Alarm logging and diagnostics</li><li>24 L internal tank</li><li>Remote access (Claind4You)</li><li>Communication protocols (MODBUS, MQTT, HTTPS)</li><li>Wheels for mobility</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Model: NiGen Nitro 35 / 70</li><li>Technology: PSA</li><li>Purity: up to 99.99%</li><li>Dew point: &lt; -50 °C</li><li>Hydrocarbons: &lt; 0.01 ppm</li><li>Output pressure: 0–6.5 bar (0–94 psi)</li></ul><h4>Flow Rate</h4><ul><li>NITRO 35: up to 35 L/min</li><li>NITRO 70: up to 70 L/min</li></ul><h4>Air Input Requirements</h4><ul><li>Particles: ≤ 0.01 µm</li><li>Oil: ≤ 0.01 mg/m³</li><li>Moisture: ≤ 3 °C dew point</li><li>Air flow:<ul><li>35: up to 90 L/min</li><li>70: up to 170 L/min</li></ul></li></ul><h4>Electrical</h4><ul><li>115 / 230 V</li><li>50–60 Hz</li><li>Power consumption: 200 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li><li>Humidity: 5–80%</li><li>Max altitude: 2000 m</li></ul><h4>Dimensions</h4><ul><li>92 × 26.5 × 75 cm</li></ul><h4>Weight</h4><ul><li>NITRO 35: 75 kg</li><li>NITRO 70: 90 kg</li></ul><h4>Communication</h4><ul><li>MODBUS (TCP), MQTT, HTTPS</li><li>Wi-Fi connectivity</li></ul><h4>Protection</h4><ul><li>IP20</li></ul><h4>Warranty</h4><ul><li>2 years</li></ul><h4>Accessories</h4><ul><li>100 L reservoir (air or nitrogen storage)</li><li>Installation kit for LC/MS (A200)</li><li>Dual Purity module (99.999% for LC-MS collision cell)</li></ul>

Organomation FLO Nitrogen Generator

The Organomation FLO provides adjustable nitrogen purity with integrated storage, real-time monitoring, and PSA technology for flexible lab applications.

The Organomation FLO (N2 FLO Series) is an advanced nitrogen generator based on PSA technology, designed for applications requiring flexible purity control and continuous operation.The system includes an oxygen analyzer and pressure regulator, enabling real-time nitrogen purity monitoring. Thanks to its integrated storage tank, no external buffer is required – one vessel serves both as buffer and supply reservoir.The generator automatically switches to energy-saving standby mode when production exceeds demand. An air quality analyzer (humidity and oil particles) ensures protection of the system and gas purity.The unit supports digital control and integration via MODBUS, MQTT, and HTTP protocols. An optional E941 food-grade configuration is available.<h4>Key Features</h4><ul><li>PSA technology (Claind Fast Purity)</li><li>Real-time nitrogen purity monitoring (O₂ analyzer)</li><li>Integrated storage tank (no buffer required)</li><li>Automatic standby mode for energy savings</li><li>Adjustable nitrogen purity</li><li>Digital control and communication (MODBUS, MQTT, HTTP)</li><li>Air quality protection (humidity, oil, particles)</li><li>Unattended continuous operation</li><li>Optional food-grade configuration (E941)</li></ul><h4>Available Models</h4><ul><li>N2 FLO 1</li><li>N2 FLO 2</li><li>N2 FLO 3</li><li>N2 FLO 4</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator</li><li>Oxygen analyzer</li><li>Pressure regulator</li><li>Digital control system</li><li>Integrated nitrogen tank</li><li>Air quality protection system</li><li>Communication interfaces (MODBUS, MQTT, HTTP)</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Technology: PSA (Fast Purity)</li><li>Dew point: -50 °C</li><li>Output pressure: 1.5 bar below inlet pressure</li><li>Noise: ≤ 60 dB</li><li>Protection class: IP20</li></ul><h4>Electrical</h4><ul><li>115 / 230 V</li><li>50–60 Hz</li><li>Power consumption: 50 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li></ul><h4>Air Input Requirements</h4><ul><li>Pressure: 6.5–13 bar</li><li>Quality: ISO 8573-1 Class 1.4.1</li><li>Dry, clean, oil-free air</li></ul><h4>Dimensions</h4><ul><li>118 × 40 × 80 cm</li></ul><h4>Weight</h4><ul><li>FLO 1: 92 kg</li><li>FLO 2: 113 kg</li><li>FLO 3: 134 kg</li><li>FLO 4: 155 kg</li></ul><h4>Performance vs Purity (L/min at 8.5 bar, 20 °C)</h4><h5>N2 FLO 1</h5><ul><li>99.999%: 3 L/min</li><li>99.99%: 6 L/min</li><li>99.9%: 15 L/min</li><li>99.5%: 25 L/min</li><li>99%: 33 L/min</li><li>98%: 40 L/min</li><li>97%: 46 L/min</li></ul><h5>N2 FLO 2</h5><ul><li>99.999%: 8 L/min</li><li>99.99%: 13 L/min</li><li>99.9%: 30 L/min</li><li>99.5%: 48 L/min</li><li>99%: 60 L/min</li><li>98%: 76 L/min</li><li>97%: 88 L/min</li></ul><h5>N2 FLO 3</h5><ul><li>99.999%: 11 L/min</li><li>99.99%: 20 L/min</li><li>99.9%: 43 L/min</li><li>99.5%: 71 L/min</li><li>99%: 88 L/min</li><li>98%: 111 L/min</li><li>97%: 130 L/min</li></ul><h5>N2 FLO 4</h5><ul><li>99.999%: 16 L/min</li><li>99.99%: 28 L/min</li><li>99.9%: 61 L/min</li><li>99.5%: 96 L/min</li><li>99%: 120 L/min</li><li>98%: 151 L/min</li><li>97%: 176 L/min</li></ul>

Organomation MAXI Nitrogen Generator

The Organomation MAXI delivers high-capacity nitrogen generation with PSA technology, real-time monitoring, and scalable industrial performance.

The Organomation MAXI (N2 MAXI Series) is a high-capacity industrial nitrogen generator based on PSA Fast Purity technology, designed for applications requiring very high flow rates and stable nitrogen supply.The system includes an oxygen analyzer and pressure regulator, enabling real-time purity monitoring. Its integrated tank eliminates the need for a buffer vessel, combining storage and delivery in one system.The generator automatically switches to energy-saving standby mode when production exceeds consumption. An air quality monitoring system (humidity and oil) protects both performance and gas purity.Full IT integration is enabled via MODBUS, MQTT, and HTTP, with an optional E941 food-grade configuration.<h4>Key Features</h4><ul><li>PSA technology (Claind Fast Purity)</li><li>Very high flow rates (up to thousands L/min)</li><li>Real-time nitrogen purity monitoring</li><li>Integrated storage tank (no buffer required)</li><li>Automatic standby mode</li><li>Adjustable purity levels</li><li>Digital control with IT integration</li><li>Air quality protection system</li><li>Unattended continuous operation</li><li>Optional food-grade configuration (E941)</li></ul><h4>Available Models</h4><ul><li>N2 MAXI 1</li><li>N2 MAXI 2</li><li>N2 MAXI 3</li><li>N2 MAXI 4</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator</li><li>Oxygen analyzer</li><li>Pressure regulator</li><li>Digital control system</li><li>Integrated nitrogen tank</li><li>Air quality monitoring system</li><li>Communication interfaces (MODBUS, MQTT, HTTP)</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Technology: PSA (Fast Purity)</li><li>Dew point: -50 °C</li><li>Output pressure: 1.5 bar below inlet pressure</li><li>Noise: ≤ 60 dB</li><li>Protection class: IP20</li></ul><h4>Electrical</h4><ul><li>115 / 230 V</li><li>50–60 Hz</li><li>Power consumption: 50 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li></ul><h4>Air Input Requirements</h4><ul><li>Pressure: 6.5–13 bar</li><li>Quality: ISO 8573-1 Class 1.4.1</li><li>Dry, clean, oil-free air</li></ul><h4>Dimensions</h4><ul><li>Height: 207.5 cm</li><li>Depth: 117 cm</li><li>Width:<ul><li>MAXI 1: 62 cm</li><li>MAXI 2: 103 cm</li><li>MAXI 3: 142 cm</li><li>MAXI 4: 182 cm</li></ul></li></ul><h4>Weight</h4><ul><li>MAXI 1: 730 kg</li><li>MAXI 2: 1400 kg</li><li>MAXI 3: 2050 kg</li><li>MAXI 4: 2700 kg</li></ul><h4>Performance vs Purity (L/min at 8.5 bar, 20 °C)</h4><h5>N2 MAXI 1</h5><ul><li>99.999%: 103 L/min</li><li>99.99%: 150 L/min</li><li>99.9%: 311 L/min</li><li>99.5%: 518 L/min</li><li>99%: 651 L/min</li><li>98%: 828 L/min</li><li>97%: 931 L/min</li></ul><h5>N2 MAXI 2</h5><ul><li>99.999%: 206 L/min</li><li>99.99%: 300 L/min</li><li>99.9%: 623 L/min</li><li>99.5%: 1,035 L/min</li><li>99%: 1,311 L/min</li><li>98%: 1,648 L/min</li><li>97%: 1,850 L/min</li></ul><h5>N2 MAXI 3</h5><ul><li>99.999%: 310 L/min</li><li>99.99%: 450 L/min</li><li>99.9%: 935 L/min</li><li>99.5%: 1,553 L/min</li><li>99%: 1,965 L/min</li><li>98%: 2,483 L/min</li><li>97%: 2,780 L/min</li></ul><h5>N2 MAXI 4</h5><ul><li>99.999%: 413 L/min</li><li>99.99%: 600 L/min</li><li>99.9%: 1,246 L/min</li><li>99.5%: 2,070 L/min</li></ul>

Organomation PICO Nitrogen Generator

The Organomation PICO delivers flexible nitrogen generation with adjustable purity, integrated storage, and real-time monitoring.

The Organomation PICO (N2 PICO Series) is a compact and high-performance nitrogen generator based on PSA Fast Purity technology, designed for applications requiring flexible purity control and stable nitrogen supply.The system includes an oxygen analyzer and pressure regulator, enabling real-time purity monitoring. Its integrated tank eliminates the need for a buffer vessel, combining storage and delivery in one unit.The generator automatically switches to energy-saving standby mode when production exceeds consumption. An air quality analyzer (humidity and oil particles) protects system performance and gas quality.The system supports digital control and integration via MODBUS, MQTT, and HTTP, with an optional E941 food-grade configuration.<h4>Key Features</h4><ul><li>PSA technology (Claind Fast Purity)</li><li>Real-time nitrogen purity monitoring</li><li>Integrated storage tank (no buffer required)</li><li>Automatic standby mode</li><li>Adjustable nitrogen purity</li><li>Digital control and communication (MODBUS, MQTT, HTTP)</li><li>Air quality protection system</li><li>Unattended continuous operation</li><li>Optional food-grade configuration (E941)</li></ul><h4>Available Models</h4><ul><li>N2 PICO 3</li><li>N2 PICO 4</li><li>N2 PICO 5</li><li>N2 PICO 6</li></ul><h4>Standard Features</h4><ul><li>PSA nitrogen generator</li><li>Oxygen analyzer</li><li>Pressure regulator</li><li>Digital control system</li><li>Integrated nitrogen tank</li><li>Air quality monitoring system</li><li>Communication interfaces (MODBUS, MQTT, HTTP)</li></ul><h3>Technical Specifications</h3><h4>General</h4><ul><li>Technology: PSA (Fast Purity)</li><li>Dew point: -50 °C</li><li>Output pressure: 1.5 bar below inlet pressure</li><li>Noise: ≤ 60 dB</li><li>Protection class: IP20</li></ul><h4>Electrical</h4><ul><li>115 / 230 V</li><li>50–60 Hz</li><li>Power consumption: 50 W</li></ul><h4>Operating Conditions</h4><ul><li>Temperature: 5–40 °C</li></ul><h4>Air Input Requirements</h4><ul><li>Pressure: 6.5–13 bar</li><li>Quality: ISO 8573-1 Class 1.4.1</li><li>Dry, clean, oil-free air</li></ul><h4>Dimensions</h4><ul><li>138 × 40 × 130 cm</li></ul><h4>Weight</h4><ul><li>PICO 3: 230 kg</li><li>PICO 4: 270 kg</li><li>PICO 5: 310 kg</li><li>PICO 6: 350 kg</li></ul><h4>Performance vs Purity (L/min at 8.5 bar, 20 °C)</h4><h5>N2 PICO 3</h5><ul><li>99.999%: 25 L/min</li><li>99.99%: 41 L/min</li><li>99.9%: 90 L/min</li><li>99.5%: 143 L/min</li><li>99%: 173 L/min</li><li>98%: 230 L/min</li><li>97%: 268 L/min</li></ul><h5>N2 PICO 4</h5><ul><li>99.999%: 33 L/min</li><li>99.99%: 55 L/min</li><li>99.9%: 115 L/min</li><li>99.5%: 191 L/min</li><li>99%: 250 L/min</li><li>98%: 306 L/min</li><li>97%: 345 L/min</li></ul><h5>N2 PICO 5</h5><ul><li>99.999%: 38 L/min</li><li>99.99%: 66 L/min</li><li>99.9%: 153 L/min</li><li>99.5%: 240 L/min</li><li>99%: 306 L/min</li><li>98%: 383 L/min</li><li>97%: 441 L/min</li></ul><h5>N2 PICO 6</h5><ul><li>99.999%: 58 L/min</li><li>99.99%: 83 L/min</li><li>99.9%: 173 L/min</li><li>99.5%: 288 L/min</li><li>99%: 365 L/min</li><li>98%: 460 L/min</li><li>97%: 518 L/min</li></ul>

Organomation RapidVap Vacuum Concentrator

RapidVap vacuum concentration systems combine vacuum, controlled heating, and vortex mixing for fast and efficient sample preparation in pharmaceutical, agricultural, and environmental laboratories.

RapidVap Vacuum Evaporation Systems are developed for efficient sample preparation in applications including drug discovery, agricultural chemistry, mycotoxin analysis, and environmental testing. By integrating vacuum, controlled heating, and vortex motion, these systems speed up solvent evaporation while providing a practical alternative to traditional centrifugal evaporation techniques.&nbsp;Developed in partnership with Labconco.<ul><li>Dry Block - Dry heating system prevents potential contamination source</li><li>Increased Surface Area - Vortex motion increases surface area for faster evaporation</li><li>PTFE-Coated Chamber - Aluminum with PTFE coating for broad range of chemical compatibility</li><li>End-Point Detention - Signal completion of run allows samples to be left unattended while drying to desired eng point</li></ul><h3>Standard Features</h3><ul><li>Dry block heating system prevents adding potential contamination source</li><li>Vortex action, heat, and vacuum combine to accelerate evaporation</li><li>Automatic vacuum release in the event of power failure</li><li>PTFE-coated chamber for broad range of chemical compatibility</li><li>Microprocessor-controlled vortex motion increases surface area for faster evaporation</li><li>Signal completion of run allows samples to be left unattended while evaporation to desired end point</li></ul><h3>Requirements (not included)</h3><ul><li>Vacuum pump</li><li>Sample block</li><li>Glassware</li></ul><h3>Specifications</h3><div><section><div><div><div><div><div><div><ul><li>Instrument Catalog Number: LC-7900000</li><li>Number of Sample Positions: Up to 110</li><li>Dimensions (w x d x h): 20.7 x 18.4 x 13.5 in</li><li>Weight:&nbsp;<ul><li>Net: 92 lbs. (42 kg)</li><li>Gross: 100 lbs. (45 kg)</li></ul></li><li>Lid Material: Glass</li><li>Temperature Range: 0-100 °C</li><li>Warranty: 1 year</li><li>Electrical Requirements: 115V, 60 Hz</li><li>Vortex Speed: Up to 1000 RPM</li></ul><h3>Accessories</h3><ul><li>PTFE-coated aluminum blocks</li><li>Flat-bottom tubes</li><li>Eight-place stainless steel racks</li><li>Glass lid with heater</li><li>Diaphragm vacuum pumps</li><li>Liquid trap</li><li>Dry ice vacuum traps</li><li>Trapping valve</li><li>Vacuum tubing kit</li></ul></div></div></div></div></div></div></section></div>

Organomation ROT-X-TRACT-LC Extraction System

ROT-X-TRACT-LC is a high-throughput liquid-liquid extraction system supporting simultaneous processing of up to eight samples using Corning Accelerated One-Step apparatuses.

The ROT-X-TRACT-LC system is designed to support up to eight (8) Corning Accelerated One-Step extraction apparatuses, providing an efficient solution for high-throughput liquid-liquid extraction workflows. The Corning Accelerated One-Step extractor integrates extraction and concentration into a single continuous process, helping laboratories streamline sample preparation while reducing manual handling steps.To maintain compatibility with standard laboratory fume hoods, the system utilizes a modified Friedrichs condenser with a reduced overall height. Allihn condensers are also available upon customer request.The hydrophobic membrane enables continuous circulation of the organic solvent through the 1 L sample bottle until extraction is complete. By integrating a stopcock assembly and a 3-ball Snyder column, the Corning One-Step extractor is capable of both analyte extraction and final solvent evaporation within the same operating cycle.The system also includes an electronic side control module that allows users to program bath temperatures and timed operating cycles in accordance with specific analytical methodologies.<ul><li>Multiple Simultaneous Extractions: Extract and concentrate up to eight samples at once</li><li>Easy Sample Access: The instrument rotates allowing all samples to be accessed from the front</li><li>Fewer Connections: One water supply line in, one drain line out</li><li>Precise: Digital control option allows for exact temperature regulation</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_ROT_X_TRACT_LC_Extraction_System_c7cbab77de.jpg" alt="Organomation ROT-X-TRACT-LC Extraction System" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_ROT_X_TRACT_LC_Extraction_System_c7cbab77de.jpg 156w," sizes="100vw" width="1400" height="1400"><h3>Standard features</h3><ul><li>Stainless steel construction</li><li>Stepped bath rim and cover disk seals steam chamber</li><li>Each condenser water line attached to centrally located water manifold</li><li>Side control box</li><li>Water flow meter</li><li>Laboratory grade materials stand up to organic solvents</li></ul><h3>Glassware features</h3><ul><li>Stop cock to switch to sample concentration after extraction is complete</li><li>1 L sample bottle</li><li>J-shaped Snyder column</li><li>Hydrophobic Corning membranes (sold separately)</li><li>In-line KD flask for optimum heat transfer</li><li>Vacuum insulated concentrator tube</li></ul><h3>Options (Add to main Cat# when purchasing)</h3><ul><li>All associated glassware</li><li>Positive pressure type Z purged bath (Option Code -Z), Cat# 13318-Z</li><li>240V wiring and plug (Option Code -2), Cat# 13318-2</li></ul><h3>Specifications</h3><ul><li>Instrument Catalog Number: 11318</li><li>Instrument Name: Corning Accelerate One-Step Extractor</li><li>Max No. of Samples: 8</li><li>Bench Space: 24 x 19 x 42 in</li><li>w x d x h: 61 x 48 x 107 cm</li><li>Attached Control Box for Power &amp; Timer: Standard</li><li>Glassware 1000ml: GS3380</li><li>Extractor Type &amp; Size: Corning One-Step 1000 ml</li><li>Solvent Flask Type &amp; Size: In-Line KD 100 ml</li><li>Concentrator Tube: Insulated Tip</li><li>Type &amp; Size: 10 ml 19/22</li><li>Snyder Column Type: J Tube</li><li>Condenser Type: Cold Finger 45/50</li><li>Solvent Collection Flood Extractor: Standard</li><li>Hydrophobic Membrane: Standard</li><li>Water Bath Catalog Number: B3101</li><li>Bath Model Number: 16169</li><li>Bath Inside Dimensions: 16.0 x 8.5 in</li><li>Diameter x Depth: 40.6 x 21.6 cm</li><li>Bath Outside Dimensions: 24 x 19 x 10 in</li><li>w x d x h: 61 x 48 x 25 cm</li><li>Water Flow Meter: 0-3.0 lpm</li><li>Heaters Total Watts: 1600 w</li><li>Bath Temperature Range: 30 - 100 C</li><li>Bath Temperature Accuracy: +/- 2 C</li></ul><h3>Accessories</h3><ul><li>P1332: O-rings for S-EVAP/RXT water manifold</li><li>GA3446C-20: Membranes Corning for Accelerated One-Step extractor, pkg of 20</li><li>All associated glassware</li><li>Bath cover disks &nbsp;</li></ul>

Organomation Teflon-Free N-EVAPs for PFAS Research

Teflon-Free N-EVAP is a nitrogen concentrator for PFAS sample preparation and concentration without the risk of PTFE contamination. It offers individual nitrogen flow control and supports up to 24 samples simultaneously.

Teflon-Free N-EVAP nitrogen evaporators are specifically designed for PFAS sample preparation and concentration workflows in analytical and environmental laboratories. Built entirely without PTFE or other fluoropolymers, these systems help minimize the risk of contamination during nitrogen blowdown evaporation while enabling simultaneous processing of multiple samples.Referenced in EPA PFAS methods 533, 537.1, and 1633, the Teflon-Free N-EVAP models are widely used in environmental and research laboratories requiring reliable PFAS sample preparation. The systems support both 15 mL and 50 mL centrifuge tubes and feature individual needle valves for each sample position, allowing independent nitrogen flow control and flexible processing of samples with different evaporation endpoints.Designed for laboratories requiring both contamination control and workflow flexibility, the Teflon-Free N-EVAP provides an efficient solution for PFAS research and analytical applications.<ul><li>Small Footprint: N-EVAP Models 111 and 112 require about one square foot of bench space</li><li>Flexible: An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li>Teflon-Free Guarantee: Made with 100% PTFE-free materials to avoid contamination of PFAS samples</li><li>Individualized Control: Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><h3>Standard features</h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter</li><li>Phthalate free silicon tubing eliminates contamination concerns</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly</li><li>Precision needle valve tube assembly</li><li>Needles, 4-inch x 19 gauge with chrome plated brass hub and stainless-steel shaft</li></ul><h3>Options (Add to main Cat# when purchasing)</h3><ul><li>220v wiring harness (Option Code# -2)<ul><li>12 position model: Cat# 11155-NT-2</li><li>24 position model: Cat# 11250-NT-2</li></ul></li><li>Reduced height (Option Code# -S)<ul><li>12 position model: Cat# 11155-NT-S</li><li>24 position model: Cat# 11250-NT-S</li></ul></li></ul><h3>Specifications</h3><ul><li>Bath Type: Water</li><li>Instrumental Catalog Number:&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 11155-NT</li><li>Teflon-Free 24p N-EVAP: 11250-NT</li></ul></li><li>Number of Sample Positions:&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 12</li><li>Teflon-Free 24p N-EVAP: 24</li></ul></li><li>Standard Dimensions (w x d x h):<ul><li>Teflon-Free 12p N-EVAP: 13 x 11 x 31 in / 33 x 28 x 79 cm</li><li>Teflon-Free 24p N-EVAP: 16 x 15 x 33 in / 41 x 38 x 61 cm</li></ul></li><li>Reduced Height Dimensions (w x d x h):<ul><li>Teflon-Free 12p N-EVAP: 13 x 11 x 24 in / 33 x 28 x 61 cm</li><li>Teflon-Free 24p N-EVAP: 16 x 15 x 24 in / 41 x 38 x 61 cm</li></ul></li><li>Sample Holder Layout: Circular</li><li>Gas Manifold Layout: Single Ring</li><li>Test Tube Range (Standard): 10-30 mm OD</li><li>Test Tube Range (Optional):&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 5-16 mm OD</li><li>Teflon-Free 24p N-EVAP: 30-70 mm OD</li></ul></li><li>Gas Flow Meter:&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 0-10 L/min</li><li>Teflon-Free 24p N-EVAP: 0-20 L/min</li></ul></li><li>Stainless Steel Needles (Length x Gauge):&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 4.0 in x 19 ga&nbsp;</li><li>Teflon-Free 24p N-EVAP: 102 mm x 19 ga</li></ul></li><li>Sample Tray Lift Mechanism: Dual Band Spring Hoist Assembly</li><li>Standard Gas Input Range: 20-30 psig</li><li>Gas Input Range w/Optional Pressure Reducing Regulator: 30-160 psig</li></ul><h5>Heating Device Specs</h5><ul><li>Model Number:<ul><li>Teflon-Free 12p N-EVAP: 5585</li><li>Teflon-Free 24p N-EVAP: 9125</li></ul></li><li>Heating Medium: Water</li><li>Inside Dimensions (Diameter x Depth):<ul><li>Teflon-Free 12p N-EVAP: 8.5 x 4.5 in / 21.6 x 11.4 cm</li><li>Teflon-Free 24p N-EVAP: 12.0 x 4.5 in / 30.5 x 11.4 cm</li></ul></li><li>Outside Dimensions (w x d x h):<ul><li>Teflon-Free 12p N-EVAP: 13 x 11 x 7 in / 33 x 28 x 18 cm</li><li>Teflon-Free 24p N-EVAP: 16 x 15 x 7 in / 41 x 38 x 18 cm</li></ul></li><li>Total Wattage:&nbsp;<ul><li>Teflon-Free 12p N-EVAP: 550 W</li><li>Teflon-Free 24p N-EVAP: 900 W</li></ul></li><li>Bath Temperature Range: 30-90 °C</li><li>Temperature Controller Type: Mechanical Thermostat</li><li>Controller Accuracy: +/- 2 °C</li></ul><h3>Accessories</h3><ul><li>Small vessel sample holder for 12 position N-EVAP model only, for vial outside diameters of 5-16 mm (cat# NA1132)</li><li>Large vessel sample holder for 24 position N-EVAP model only, for vial outside diameters of 30-56 mm (cat# NA1113)</li><li>Teflon-free nitrogen generator (cat# NA1955-NT)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>Teflon-free pressure reducing regulator 0-160 psi (cat# NA0630-NT)</li><li>Various needle sizes and gauges</li></ul><h3>Replacement parts</h3><ul><li>P0627: Valve Tube Assembly – Post 1997</li><li>P0607: Luer &amp; washer for N-EVAP valve tube</li><li>P0634: Tube Fitting nylon 3 part for N-EVAP valve tube</li></ul>

Products from Organomation distributed by Organomation - page 1

Related content

Wiley releases the 2026 edition of the Wiley Registry of Mass Spectral Data to expand GC-MS identification intelligence

SPE Troubleshooting: Understanding and Resolving Low Recovery in Solid Phase Extraction

News from LabRulezGCMS Library - Week 22, 2026