EU Regulation 396/2005: Pesticide Residue Testing and the Critical Role of QuEChERS Evaporation in Food Safety

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 4th May 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application note by<strong> Shimadzu, </strong>presentation by <strong>MDCW / JEOL</strong> and technical note by <strong>Thermo Fisher Scientific!</strong></p><h3><strong>1. MDCW / JEOL: Flow-Modulated GCxGC-QMS Analysis Without Splitting Off the GC Flow</strong></h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_16_Jensen_11e29d5022.pdf"><strong>Full PDF for download</strong></a></li></ul><section><div><div><div><div><div><div><p>This presentation by Kirk Jensen (JEOL USA) explores the feasibility of performing <strong>flow-modulated comprehensive two-dimensional gas chromatography (GC×GC) coupled with quadrupole mass spectrometry (QMS)</strong> without splitting the GC flow, which is traditionally required to protect MS systems from high carrier gas flows. The core concept builds on GC×GC, where compounds are separated using a primary and secondary column connected via a modulator, significantly increasing separation power compared to one-dimensional GC. The presentation contrasts <strong>thermal modulation</strong> (offering sharper peaks and higher theoretical sensitivity but requiring cryogenic cooling) with <strong>flow modulation</strong>, which avoids cryogens, handles volatile analytes well, and is more flexible, but typically demands higher gas flows that standard MS systems cannot tolerate .</p><p>To address this limitation, the study utilizes the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=24&amp;search=JMS-Q1600GC"><strong>JEOL JMS-Q1600GC</strong></a><strong> UltraQuad quadrupole GC-MS system</strong>, which can accept unusually high carrier gas flows (up to ~20 mL/min), enabling direct coupling with a <strong>SepSolve INSIGHT flow modulator</strong> without splitting the effluent . The analytical setup includes dual GC columns (e.g., Zebron ZB-5MSplus for the first dimension and BPX50 for the second), high secondary flow rates (~25 mL/min), and electron ionization (EI) MS detection. Additional system components include optional FID detection, bleed line control, and ChromeSpace software for data processing . This configuration allows full analyte transfer into the MS, eliminating the need for flow splitting and potentially improving detection efficiency.</p><p>Experimental results demonstrate the applicability of this approach to complex mixtures, including a <strong>pesticide mixture containing over 200 compounds</strong> and real-world samples such as perfumes and fuels. The GC×GC-MS system produced detailed two-dimensional chromatograms with high spectral quality, enabling the correct identification of approximately 120 compounds despite relatively moderate spectral match factors . Comparisons at different flow rates (e.g., 25 vs. 50 mL/min) showed that spectral integrity and compound identification remain robust, indicating that higher flow operation does not significantly compromise MS performance.</p><p>In conclusion, the work demonstrates that <strong>flow-modulated GC×GC-QMS without flow splitting is feasible</strong>, provided that the MS system can tolerate high carrier gas flows. While further optimization is needed (e.g., column selection, inlet pressure, and separation conditions), the approach offers a practical alternative to thermal modulation by eliminating cryogens and simplifying operation. Future work will focus on improving sensitivity, optimizing separations, and exploring alternative carrier gases such as hydrogen to reduce costs and expand applicability</p></div></div></div></div></div></div></section><h3><strong>2. Shimadzu: Detailed Hydrocarbon Analysis by Nexis GC-2030 Using ASTM D6730</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00863_en_eb633bc741.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>User Benefits</strong></h5><ul><li>Detailed compositional analysis of gasoline in accordance with ASTM D6730 is feasible using the Nexis GC-2030.&nbsp;</li><li>By employing PONAsolution, a PONA/DHA analysis software, laborious identification tasks can be reduced, and quantitation calculations and report generation can be performed automatically.</li></ul><p>ASTM D6730 specifies the analysis of hydrocarbons in gasoline and oxygenates such as ethanol, methyl tert-butyl ether (MTBE), and ethyl tert-butyl ether (ETBE) over a boiling point range up to 225 ̊C. Identification and quantification of individual compounds in gasoline are critically important for refinery process control and product quality assurance. In this application news, we report compositional analysis of gasoline conforming to ASTM D6730 using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexis+GC-2030"><strong>Nexis GC-2030 gas chromatograph</strong></a>. Gasoline typically comprises over 100 hydrocarbons, making identification tasks highly complex; however, PONAsolution, a PONA/DHA analysissoftware,simplifies this process.</p><h4><strong>PONAsolution</strong></h4><p>PONAsolution Ver.6 provides retention index libraries for each relevant standard (ASTM D6730, D6729, D5134, D6733). Identification of n-alkanes automatically corrects the retention times of the remaining several hundred components, thus streamlining the identification process. When only a specific retention region requires adjustment, the two-point identification function is useful (Fig. 1). In the two-point identification procedure, reference and sample chromatograms are compared while assigning corresponding peaks. First, click on an identified component mark in the reference data (Fig. 1, a), then click the matching sample peak (Fig. 1, b). Repeat this for a second pair of peaks. The retention times of components between these two anchor points are then automatically corrected.</p><h4><strong>Conclusion</strong></h4><p>Compositional analysis of gasoline in accordance with ASTM D6730 was performed. The combination of SH PONA Tuning Column and SH-1 PONA main column enabled separation of compounds with closely spaced retention times. Moreover, use of PONAsolution software greatly simplifies complex identification tasks.</p><h3><strong>3. Thermo Fisher Scientific: Fiber optic probes add flexibility to Raman chemical analysis</strong></h3><ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/drx3_flex_tech_note_tn54708_bebb56b870.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Fourier Transform Infrared Spectroscopy (FTIR) and Raman Spectroscopy are non-destructive analytical techniques that rely on the interaction of electromagnetic radiation with molecular vibrations to provide information about the chemical composition and structure of a sample. Despite their similarities, there are some distinct differences between the two techniques. In principle, FTIR is based on the absorption of infrared radiation by molecules and measures changes in dipole moment during molecular vibrations. Raman spectroscopy, on the other hand, is based on the inelastic scattering of monochromatic light and measures changes in polarizability during molecular vibrations.&nbsp;</p><p>When applied to bulk chemical analysis, both FTIR and Raman spectroscopy can be used to analyze solids, liquids, and gases, but the nature of Raman spectroscopy lends some unique sampling advantages. Additionally, Raman often requires little to no sample preparation. Presented herein are application examples that highlight some of the sampling advantages of Raman spectroscopy. All the spectral data in this technical note were collected using a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2238"><strong>Thermo Scientific™ DXR3 Flex Raman Spectrometer</strong></a> equipped with a fiber optic probe. (Fiber optics are readily available for Raman spectroscopy because of the use of visible and NIR light and do not require the exotic materials associated with FTIR fiber optics.) Preliminary tests for all samples were carried out using both 532 nm and 785 nm excitations, and it was determined that the 785 nm laser set gave an overall better balance between fluorescence and Raman scattering efficiency.</p><h4><strong>Summary&nbsp;</strong></h4><p>In this technical note, the analyses of a variety of samples by Raman spectroscopy are demonstrated. All samples were analyzed without sample preparation.&nbsp;</p><ul><li>Precise and localized analysis at the focal point of the Raman-exciting laser allows sampling through glass bottles, blister packaging and plastic containers, which eliminates possible cross contamination and analyst exposure to hazardous materials. The contributions from the packaging and containers depend on the type of container material, the container thickness, and the materials’ chemical compositional complexity, but these contributions can be readily subtracted out when needed.&nbsp;</li><li>Water is a weak Raman scatterer. Raman therefore has reduced water sensitivity, making it a preferred technique for aqueous solution analysis over FTIR. As demonstrated in the analysis of an energy drink, the Raman bands from water can be subtracted from the spectrum of the aqueous solution, leading to the identification of the components of the solution.&nbsp;</li><li>Raman spectroscopy is well suited for the analysis of inorganic materials, especially in identifying the crystal phases and polymorphs, as demonstrated by the analyses of minerals and pigments in a painting.&nbsp;</li><li>Fiber optic probes provide flexibility and ease of maneuverability. This is particularly advantageous when analyzing samples that are difficult to access or manipulate, such as large containers, geological samples and paintings</li></ul><p>The DXR3 Flex has multiple sampling options available. A properly configured fiber-optic probe is arguably the most versatile accessory for the analysis of bulk solids and liquids. The advantages, both from those inherent to Raman spectroscopy and those resulting from the use of fiber optic probe, provide opportunities for a wide variety of different applications when using the DXR3 Flex Raman Spectrometer.</p>

News from LabRulezGCMS Library - Week 19, 2026

<p><strong>🎤Francis Femi Oloy</strong></p><p><strong>In this episode of Concentrating on Chromatography, David speaks with Francis Femi Oloy about using chromatography to uncover hidden pollutants in real-world water systems.</strong></p><p>Femi’s team analyzed polychlorinated biphenyls (PCBs) in six major rivers in southwestern Nigeria — compounds that were banned decades ago but still persist in the environment. Using a workflow that many analytical labs will recognize — liquid–liquid extraction, cleanup, rotary evaporation, nitrogen blowdown, and GC-ECD detection — they quantified 25 PCB congeners at trace levels and linked the results to ecological and human health risk.</p><h4><strong>In this conversation, we cover:</strong></h4><ul><li>Why legacy pollutants like PCBs still show up today</li><li>Choosing GC-ECD vs LC-MS for halogenated compounds</li><li>Liquid–liquid extraction and matrix cleanup strategies</li><li>Why sample concentration is critical for dilute environmental samples</li><li>How rotovap + nitrogen blowdown work together without losing volatile analytes</li><li>Seasonal trends (why wet season levels were higher)</li><li>Translating concentration data into meaningful risk assessments</li></ul><h3><strong>Video Transcription</strong></h3><section><div><div><div><div><div><div><p><strong>Persistent organic pollutants</strong> such as polychlorinated biphenyls (<strong>PCBs</strong>) remain a significant environmental concern despite decades of regulatory restrictions. In this interview, Francais Femi Oloy discusses the environmental and analytical challenges associated with monitoring PCB contamination in rivers of southwestern Nigeria, a rapidly industrializing region where urban growth, industrial activity, agriculture, and dense populations intersect with extensive aquatic systems.</p><p>Oloy explains that his interest in environmental contaminant analysis emerged from observing unexplained health problems and environmental degradation while growing up in Nigeria. This motivated his transition into organic and environmental chemistry, with a focus on identifying pollutants present in drinking water, agricultural soils, and food systems. Southwestern Nigeria, particularly the Lagos region, represents a critical environmental monitoring area due to intense industrial development, shipping activity, and widespread human dependence on rivers for domestic use, agriculture, and fishing.</p><p>Although PCBs are considered “<strong>legacy pollutants</strong>” and are no longer intentionally produced, the interview highlights why they continue to persist in aquatic environments. Old electrical transformers and aging industrial equipment still contain PCB residues, while historical contamination stored in river sediments can become remobilized during flooding, dredging, or sediment disturbance. Because PCBs are hydrophobic and resistant to degradation, they preferentially accumulate in sediments and bioaccumulate through aquatic food chains, creating long-term environmental and human exposure risks.</p><p>A major focus of the discussion centers on the analytical workflow used for PCB determination in environmental water samples. Composite river water samples were collected in amber glass bottles to avoid contamination and photodegradation, preserved with sodium azide to minimize microbial activity, and stored under cooled conditions prior to extraction. The analytical protocol employed <strong>liquid–liquid extraction</strong> using dichloromethane (DCM) and hexane to recover both polar and nonpolar PCB congeners. Oloy emphasizes that liquid–liquid extraction was selected over solid-phase extraction (SPE) because of concerns about congener retention within sorbent materials and clogging issues associated with large-volume environmental samples.</p><p>Following extraction, concentration and cleanup represented critical analytical stages due to the trace-level occurrence and volatility of PCBs. Silica and alumina cleanup procedures were used to remove matrix interferences prior to instrumental analysis. The concentration workflow combined rotary evaporation for bulk solvent reduction with nitrogen blowdown for final volume reduction to less than 1 mL, while carefully avoiding excessive temperature or complete dryness to minimize analyte loss. Oloy repeatedly stresses that improper concentration procedures are among the most common causes of analytical failure in PCB analysis.</p><p>For instrumental determination, the study utilized <strong>gas chromatography coupled with electron capture detection (GC-ECD)</strong> rather than LC-MS or GC-MS. According to Oloy, GC was preferred because PCBs are sufficiently volatile for gas chromatographic separation, while ECD provided superior sensitivity and selectivity for chlorinated compounds at environmentally relevant concentrations. The interview also discusses analytical validation strategies, including the use of surrogate standards to assess <strong>recoveries,</strong> which ranged from approximately <strong>85% to 114%</strong>, and signal-to-noise-based determination of detection limits.</p><p>The study further examined <strong>seasonal variations in PCB concentrations</strong>, revealing <strong>higher levels during the wet season</strong>. This observation was attributed to rainfall-driven runoff from contaminated infrastructure, sediment resuspension, and lower temperatures that reduce volatilization losses. To communicate toxicological relevance beyond simple concentration reporting, the researchers also calculated <strong>toxic equivalency values (TEQs)</strong>, converting mixtures of PCB congeners into biologically meaningful toxicity estimates comparable to dioxin toxicity metrics.</p><p>Beyond environmental monitoring, Oloy highlights broader research interests focused on <strong>pollutant remediation and sustainable environmental protection</strong>. His group is also involved in developing catalytic materials capable of degrading or removing persistent contaminants from environmental systems. Throughout the discussion, he emphasizes that analytical chemistry plays a central role not only in detecting pollutants, but also in enabling prevention, remediation, and long-term environmental management strategies.</p></div></div></div></div></div></div></section><blockquote><p><strong>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</strong></p></blockquote><blockquote><h4><strong>Concentrating on Chromatography Podcast</strong></h4><p>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!</p><p>You can find <strong>Concentrating on Chromatography Podcast </strong>in podcast apps:</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL"><strong>Spotify</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185"><strong>Apple podcast</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography"><strong>podscan</strong></a></li></ul><p>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos"><strong>YouTube channel</strong></a></p></blockquote>

Tracking Toxic PCBs in River Water using Gas Chromatography–Electron Capture Detection

Article

Product

Application

Video

Scientists

Environment

Food

Presentation

Interview

Science and research

Laboratories

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Thermo Fisher Scientific

<p>Join this webinar and learn about a solution for microplastic and nanoplastic analysis using pyrolysis in combination with single quadrupole GC-MS or high resolution GC-MS.</p>
<p>In this webinar, you will:</p>
<ul>
<li><strong>understand the workflow for biota (salmon) from sample preparation to a quantitative result</strong></li>
<li><strong>hear how pyrolysis in combination with GC-MS technology provides a fully automated workflow and the required selectivity and quantification abilities for the detection of microplastics</strong></li>
<li><strong>learn how software tools support you to gain the required selectivity for microplastics and to quantify results</strong></li>
</ul>
<p>This webinar is relevant for:</p>
<ul>
<li>researchers from the food and environmental field</li>
<li>control and governmental labs</li>
<li>plastic manufacturers that are interested to understand more about the degradation of their products</li>
<li>cosmetic industry or research and control labs for this industry</li>
</ul>
<p>Microplastic are particles of  1µm to 5mm and turned into an an emerging issue all over the globe. The intake into the environment can derive from different sources such as laundry effluents, car tires, plastic waste to name a few. Microplastic is found in soil, air and water. Here is an example to give an impression of magnitude of microplastic in the marine environment:  4.8 million tons of plastic waste enter the world&#39;s oceans each year (1). They degradate and can enter as micro- or nanoplastic into the food chain. The degradation of microplastic makes it more risky since nanoplastic (particles smaller than 1 µm) can go directly into human cells.</p>
<p>In addition to their presence which is already of concern, they can adsorb other pollutants like  persistent organic compounds (POPs) on their surfaces. These hydrophobic organic chemicals adhere to the microplastic particles and reach concentrations up to 1 million times higher that of the surrounding medium (e.g., water) (2). The particles may enter the stomach and release the POPs, which accumulate in fat cells. </p>
<p>The goal of researchers is the determination of the micro- and and nanoplastics, their composition and quantities, as well as their degradation products and their source of origin. To identify the kind of plastic like polyethylene (PE) or polyamid-66 (Nylon66), spectroscopic techniques such as FTIR can be used. If quantification or detection of nanoplastic are required, pyrolysis in combination with single quadrupole GC-MS comes into place. For more detailed information, such as degradation products or isotopic ratios for the determination of source of origin, high-resolution-MS is the technology the technology of choice.</p>
<ul>
<li><a href="https://www.thuenen.de/de/fachinstitute/fischereioekologie/plasm-mikroplastik-und-meeresfische">References: (1)</a></li>
<li><a href="https://www.aquakulturinfo.de/mikroplastik">References: (2)</a></li>
</ul>
<blockquote>
<p><strong>Presenter:</strong> Dr. Michael Soll (European Business Development Manager, Frontier Laboratories Ltc.)</p>
</blockquote>
<blockquote>
<p>Michael Soll studied biology and received his PhD in 1993 at Ruhr University Bochum, Germany.</p>
</blockquote>
<blockquote>
<p>He has over 25 years of experience in business development, marketing and sales at various companies active in analytical instrumentation and analytical services in Europe. His functional experience included marketing, application and sales of LC- and GC-coupled mass spectrometry, MALDI-TOF MS and chromatographic tools. End of 2014, he joined Frontier Laboratories, a global leading company in GC/MS coupled analytical pyrolysis. Here, he is managing and supporting distribution partners and supports users of analytical pyrolyzers in whole Europe in terms of applications and technical concerns.</p>
</blockquote>
<blockquote>
<p>His most recent employment history is as follows:</p>
</blockquote>
<blockquote>
<p>Frontier Laboratories Ltd, Koriyama, Japan, 2014 to present as European Business Development Manager, responsible for support of distribution partners and users in Europe, marketing directed to sales channels and customers</p>
</blockquote>
<blockquote>
<p>LECO Germany, Mönchengladbach, Germany, 2008 to 2014 as Managing Director, responsible for achievement of sales targets, strategic directions, marketing and service optimization</p>
</blockquote>
<blockquote>
<p>SGS, Geneva, Switzerland, 2006 to 2008 asBusiness development manager biopharma quality control Europe.</p>
</blockquote>
<blockquote>
<p>ABSciex, Darmstadt, Germany, 1999 to 2006 asSales Manager Proteomics products in DACH territory: increase sales of Mass Spectrometry and Chromatography products</p>
</blockquote>
<blockquote>
<p><strong>Presenter:</strong> Petra Gerhards (EMEA Regional Marketing Manager GC&amp;GC-MS, Thermo Fisher Scientific)</p>
</blockquote>
<blockquote>
<p>Petra holds a diploma engineer in instrumentalized analytical chemistry from the Technical University Krefeld/Germany. For more than 30 years, she worked in the field of GC and GC-MS and covered many technologies in GC and GC-MS. Currently, she supports users and customer application teams all over EMEA in her position as EMEA Regional Marketing Manager.</p>
</blockquote>


Pixabay/Filmbetrachter: Pyrolysis GC-MS for the analysis of microplastic in biota samples

Pyrolysis GC-MS for the analysis of microplastic in biota samples

 solution for microplastic and nanoplastic analysis using pyrolysis in combination with single quadrupole GC-MS or high resolution GC-MS.

Pyrolysis GC-MS for the analysis of microplastic in biota

<div><div container-id="cq-colctrl-lt0" comp-id="A1"><div><p><strong>Plastics are now part of our air, water, food—and even our biology. But how do we detect and characterize them at trace levels across such diverse matrices?</strong></p><p>Join us for this insightful webinar where experts will explore complementary Pyrolysis-GC-MS approaches to detecting and profiling micro- and nano-plastics (MNPs). From high-resolution workflows for biological exposure analysis to routine GC-MS methods for environmental monitoring, you’ll discover how scalable pyrolysis strategies are transforming our ability to identify, quantify, and understand plastic pollution.</p><ul><li><strong>Dr. Kuanliang Shao</strong> (Emory University) will share how Py-GC-HRMS is enabling population-level biomonitoring of MNPs in human tissues and its integration into exposomics frameworks.</li><li><strong>Dr. Giulia Riccardino</strong> (Thermo Fisher Scientific) will present a robust, single-quadrupole Py-GC-MS method for quantitative polymer profiling in plastic debris, including real-world samples collected from Mediterranean beaches.</li></ul><p>Whether you’re working in environmental science, analytical chemistry, or human health research, this session offers practical tools and cutting-edge insights into one of today’s most urgent global challenges.</p><h5><strong>Who should attend?</strong></h5><ul><li>Environmental researchers</li><li>Exposomics scientists</li><li>Analytical chemists</li><li>Public health professionals</li><li>Laboratories investigating plastic pollution or polymer exposure.</li></ul><blockquote><p><strong>Presenter: </strong>Kuanliang Shao, PhD (Postdoctoral Fellow, Department of Environmental Health Comprehensive Laboratory for Untargeted Exposome Science, Emory University)</p><p>Kuanliang Shao is a postdoctoral fellow in the Department of Environmental Health at Emory University’s Rollins School of Public Health. His research focuses on developing untargeted Py-GC-HRMS and LC-HRMS methods for detecting and quantifying micro- and nano-plastics (MNPs) and related chemicals in humans, along with their biological effects. He holds a B.S. in Chemistry from the University of Science and Technology of China and earned his Ph.D. in Physical Chemistry from the University of California, Riverside, where he advanced pyrolysis reaction theory. His work also includes studies on air pollution and exposure risk, supported by two internal UC research grants.</p><p><strong>Presenter:&nbsp;</strong>Giulia Riccardino (Senior GC/GC-MS Applications Specialist, Thermo Fisher Scientific)</p><p>Giulia Riccardino is a senior applications specialist for the GC/GC-MS business unit. Before joining Thermo Fisher Scientific she worked for more than 10 years as a biologist in a clinical and toxicology lab where she had an extensive experience with both gas and liquid chromatography. She started at Thermo Fisher as a product specialist for GC standalone and autosamplers and in 2018 she joined the product applications specialist team. Giulia holds a degree in Biology from the University of Milan with a further Specialization in Clinical Biochemistry.</p><p><strong>Moderator: </strong>Daniela Cavagnino (Product Marketing Manager, Thermo Fisher Scientific)</p></blockquote></div></div></div>

Thermo Fisher Scientific: Scalable Pyrolysis-GC-MS for Mapping Plastic Exposure in Environments and Biology

Scalable Pyrolysis-GC-MS for Mapping Plastic Exposure in Environments and Biology

Join us for webinar where experts will explore complementary Pyrolysis-GC-MS approaches to detecting and profiling micro- and nano-plastics (MNPs).

Scalable Pyrolysis-GC-MS for Plastic Exposure Mapping

<p><strong>Microplastics are increasingly detected across the environment and even within the human body, raising urgent questions about their sources, exposure pathways, and health implications.</strong></p><p>In this webinar, we will explore complementary analytical solutions for comprehensive microplastics characterization.</p><p>Discover how<strong> FTIR and Raman spectroscopy</strong> enable reliable particle identification and imaging—covering sizes from millimeters down to a few microns—while high-resolution mass spectrometry techniques such as pyrolysis <strong>GC-HRMS and LC-based workflows</strong> provide sensitive detection and quantification of polymers and plastic-related chemicals in complex environmental and biological matrices.</p><p>From particle-level identification to advanced chemical fingerprinting and exposure assessment, learn how Thermo Fisher Scientific technologies support micro- and nanoplastics analysis across research, environmental monitoring, and human biomonitoring applications.</p><blockquote><p><strong>Speaker: </strong>Dr. Kuanliang Shao (Postdoctoral Fellow, Department of Environmental Health Comprehensive Laboratory for Untargeted Exposome Science | Emory University) will share how Py-GC-HRMS is enabling population-level biomonitoring of MNPs in human tissues and its integration into exposomics frameworks.</p><p><strong>Speaker:&nbsp;</strong>Dr. Wang Rui (Business Development Manager, Chemical Analysis | Thermo Fisher Scientific) will provide an overview of FTIR and Raman spectroscopy solutions for microplastics identification, highlighting how technologies ranging from point-and-shoot systems to advanced imaging platforms enable reliable analysis across diverse environmental samples and particle sizes, from millimeters down to a few microns.</p></blockquote>

Thermo Fisher Scientific: Uncovering Microplastics: Identification, Quantification, and Exposure Assessment

Uncovering Microplastics: Identification, Quantification, and Exposure Assessment

In this webinar, we will explore complementary analytical solutions for comprehensive microplastics characterization.

GCMS webinars focusing on GC/MS/MS, Pyrolysis - page 1