EU Regulation 396/2005: Pesticide Residue Testing and the Critical Role of QuEChERS Evaporation in Food Safety

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 4th May 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application note by<strong> Shimadzu, </strong>presentation by <strong>MDCW / JEOL</strong> and technical note by <strong>Thermo Fisher Scientific!</strong></p><h3><strong>1. MDCW / JEOL: Flow-Modulated GCxGC-QMS Analysis Without Splitting Off the GC Flow</strong></h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_16_Jensen_11e29d5022.pdf"><strong>Full PDF for download</strong></a></li></ul><section><div><div><div><div><div><div><p>This presentation by Kirk Jensen (JEOL USA) explores the feasibility of performing <strong>flow-modulated comprehensive two-dimensional gas chromatography (GC×GC) coupled with quadrupole mass spectrometry (QMS)</strong> without splitting the GC flow, which is traditionally required to protect MS systems from high carrier gas flows. The core concept builds on GC×GC, where compounds are separated using a primary and secondary column connected via a modulator, significantly increasing separation power compared to one-dimensional GC. The presentation contrasts <strong>thermal modulation</strong> (offering sharper peaks and higher theoretical sensitivity but requiring cryogenic cooling) with <strong>flow modulation</strong>, which avoids cryogens, handles volatile analytes well, and is more flexible, but typically demands higher gas flows that standard MS systems cannot tolerate .</p><p>To address this limitation, the study utilizes the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=24&amp;search=JMS-Q1600GC"><strong>JEOL JMS-Q1600GC</strong></a><strong> UltraQuad quadrupole GC-MS system</strong>, which can accept unusually high carrier gas flows (up to ~20 mL/min), enabling direct coupling with a <strong>SepSolve INSIGHT flow modulator</strong> without splitting the effluent . The analytical setup includes dual GC columns (e.g., Zebron ZB-5MSplus for the first dimension and BPX50 for the second), high secondary flow rates (~25 mL/min), and electron ionization (EI) MS detection. Additional system components include optional FID detection, bleed line control, and ChromeSpace software for data processing . This configuration allows full analyte transfer into the MS, eliminating the need for flow splitting and potentially improving detection efficiency.</p><p>Experimental results demonstrate the applicability of this approach to complex mixtures, including a <strong>pesticide mixture containing over 200 compounds</strong> and real-world samples such as perfumes and fuels. The GC×GC-MS system produced detailed two-dimensional chromatograms with high spectral quality, enabling the correct identification of approximately 120 compounds despite relatively moderate spectral match factors . Comparisons at different flow rates (e.g., 25 vs. 50 mL/min) showed that spectral integrity and compound identification remain robust, indicating that higher flow operation does not significantly compromise MS performance.</p><p>In conclusion, the work demonstrates that <strong>flow-modulated GC×GC-QMS without flow splitting is feasible</strong>, provided that the MS system can tolerate high carrier gas flows. While further optimization is needed (e.g., column selection, inlet pressure, and separation conditions), the approach offers a practical alternative to thermal modulation by eliminating cryogens and simplifying operation. Future work will focus on improving sensitivity, optimizing separations, and exploring alternative carrier gases such as hydrogen to reduce costs and expand applicability</p></div></div></div></div></div></div></section><h3><strong>2. Shimadzu: Detailed Hydrocarbon Analysis by Nexis GC-2030 Using ASTM D6730</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00863_en_eb633bc741.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>User Benefits</strong></h5><ul><li>Detailed compositional analysis of gasoline in accordance with ASTM D6730 is feasible using the Nexis GC-2030.&nbsp;</li><li>By employing PONAsolution, a PONA/DHA analysis software, laborious identification tasks can be reduced, and quantitation calculations and report generation can be performed automatically.</li></ul><p>ASTM D6730 specifies the analysis of hydrocarbons in gasoline and oxygenates such as ethanol, methyl tert-butyl ether (MTBE), and ethyl tert-butyl ether (ETBE) over a boiling point range up to 225 ̊C. Identification and quantification of individual compounds in gasoline are critically important for refinery process control and product quality assurance. In this application news, we report compositional analysis of gasoline conforming to ASTM D6730 using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexis+GC-2030"><strong>Nexis GC-2030 gas chromatograph</strong></a>. Gasoline typically comprises over 100 hydrocarbons, making identification tasks highly complex; however, PONAsolution, a PONA/DHA analysissoftware,simplifies this process.</p><h4><strong>PONAsolution</strong></h4><p>PONAsolution Ver.6 provides retention index libraries for each relevant standard (ASTM D6730, D6729, D5134, D6733). Identification of n-alkanes automatically corrects the retention times of the remaining several hundred components, thus streamlining the identification process. When only a specific retention region requires adjustment, the two-point identification function is useful (Fig. 1). In the two-point identification procedure, reference and sample chromatograms are compared while assigning corresponding peaks. First, click on an identified component mark in the reference data (Fig. 1, a), then click the matching sample peak (Fig. 1, b). Repeat this for a second pair of peaks. The retention times of components between these two anchor points are then automatically corrected.</p><h4><strong>Conclusion</strong></h4><p>Compositional analysis of gasoline in accordance with ASTM D6730 was performed. The combination of SH PONA Tuning Column and SH-1 PONA main column enabled separation of compounds with closely spaced retention times. Moreover, use of PONAsolution software greatly simplifies complex identification tasks.</p><h3><strong>3. Thermo Fisher Scientific: Fiber optic probes add flexibility to Raman chemical analysis</strong></h3><ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/drx3_flex_tech_note_tn54708_bebb56b870.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Fourier Transform Infrared Spectroscopy (FTIR) and Raman Spectroscopy are non-destructive analytical techniques that rely on the interaction of electromagnetic radiation with molecular vibrations to provide information about the chemical composition and structure of a sample. Despite their similarities, there are some distinct differences between the two techniques. In principle, FTIR is based on the absorption of infrared radiation by molecules and measures changes in dipole moment during molecular vibrations. Raman spectroscopy, on the other hand, is based on the inelastic scattering of monochromatic light and measures changes in polarizability during molecular vibrations.&nbsp;</p><p>When applied to bulk chemical analysis, both FTIR and Raman spectroscopy can be used to analyze solids, liquids, and gases, but the nature of Raman spectroscopy lends some unique sampling advantages. Additionally, Raman often requires little to no sample preparation. Presented herein are application examples that highlight some of the sampling advantages of Raman spectroscopy. All the spectral data in this technical note were collected using a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2238"><strong>Thermo Scientific™ DXR3 Flex Raman Spectrometer</strong></a> equipped with a fiber optic probe. (Fiber optics are readily available for Raman spectroscopy because of the use of visible and NIR light and do not require the exotic materials associated with FTIR fiber optics.) Preliminary tests for all samples were carried out using both 532 nm and 785 nm excitations, and it was determined that the 785 nm laser set gave an overall better balance between fluorescence and Raman scattering efficiency.</p><h4><strong>Summary&nbsp;</strong></h4><p>In this technical note, the analyses of a variety of samples by Raman spectroscopy are demonstrated. All samples were analyzed without sample preparation.&nbsp;</p><ul><li>Precise and localized analysis at the focal point of the Raman-exciting laser allows sampling through glass bottles, blister packaging and plastic containers, which eliminates possible cross contamination and analyst exposure to hazardous materials. The contributions from the packaging and containers depend on the type of container material, the container thickness, and the materials’ chemical compositional complexity, but these contributions can be readily subtracted out when needed.&nbsp;</li><li>Water is a weak Raman scatterer. Raman therefore has reduced water sensitivity, making it a preferred technique for aqueous solution analysis over FTIR. As demonstrated in the analysis of an energy drink, the Raman bands from water can be subtracted from the spectrum of the aqueous solution, leading to the identification of the components of the solution.&nbsp;</li><li>Raman spectroscopy is well suited for the analysis of inorganic materials, especially in identifying the crystal phases and polymorphs, as demonstrated by the analyses of minerals and pigments in a painting.&nbsp;</li><li>Fiber optic probes provide flexibility and ease of maneuverability. This is particularly advantageous when analyzing samples that are difficult to access or manipulate, such as large containers, geological samples and paintings</li></ul><p>The DXR3 Flex has multiple sampling options available. A properly configured fiber-optic probe is arguably the most versatile accessory for the analysis of bulk solids and liquids. The advantages, both from those inherent to Raman spectroscopy and those resulting from the use of fiber optic probe, provide opportunities for a wide variety of different applications when using the DXR3 Flex Raman Spectrometer.</p>

News from LabRulezGCMS Library - Week 19, 2026

<p><strong>🎤Francis Femi Oloy</strong></p><p><strong>In this episode of Concentrating on Chromatography, David speaks with Francis Femi Oloy about using chromatography to uncover hidden pollutants in real-world water systems.</strong></p><p>Femi’s team analyzed polychlorinated biphenyls (PCBs) in six major rivers in southwestern Nigeria — compounds that were banned decades ago but still persist in the environment. Using a workflow that many analytical labs will recognize — liquid–liquid extraction, cleanup, rotary evaporation, nitrogen blowdown, and GC-ECD detection — they quantified 25 PCB congeners at trace levels and linked the results to ecological and human health risk.</p><h4><strong>In this conversation, we cover:</strong></h4><ul><li>Why legacy pollutants like PCBs still show up today</li><li>Choosing GC-ECD vs LC-MS for halogenated compounds</li><li>Liquid–liquid extraction and matrix cleanup strategies</li><li>Why sample concentration is critical for dilute environmental samples</li><li>How rotovap + nitrogen blowdown work together without losing volatile analytes</li><li>Seasonal trends (why wet season levels were higher)</li><li>Translating concentration data into meaningful risk assessments</li></ul><h3><strong>Video Transcription</strong></h3><section><div><div><div><div><div><div><p><strong>Persistent organic pollutants</strong> such as polychlorinated biphenyls (<strong>PCBs</strong>) remain a significant environmental concern despite decades of regulatory restrictions. In this interview, Francais Femi Oloy discusses the environmental and analytical challenges associated with monitoring PCB contamination in rivers of southwestern Nigeria, a rapidly industrializing region where urban growth, industrial activity, agriculture, and dense populations intersect with extensive aquatic systems.</p><p>Oloy explains that his interest in environmental contaminant analysis emerged from observing unexplained health problems and environmental degradation while growing up in Nigeria. This motivated his transition into organic and environmental chemistry, with a focus on identifying pollutants present in drinking water, agricultural soils, and food systems. Southwestern Nigeria, particularly the Lagos region, represents a critical environmental monitoring area due to intense industrial development, shipping activity, and widespread human dependence on rivers for domestic use, agriculture, and fishing.</p><p>Although PCBs are considered “<strong>legacy pollutants</strong>” and are no longer intentionally produced, the interview highlights why they continue to persist in aquatic environments. Old electrical transformers and aging industrial equipment still contain PCB residues, while historical contamination stored in river sediments can become remobilized during flooding, dredging, or sediment disturbance. Because PCBs are hydrophobic and resistant to degradation, they preferentially accumulate in sediments and bioaccumulate through aquatic food chains, creating long-term environmental and human exposure risks.</p><p>A major focus of the discussion centers on the analytical workflow used for PCB determination in environmental water samples. Composite river water samples were collected in amber glass bottles to avoid contamination and photodegradation, preserved with sodium azide to minimize microbial activity, and stored under cooled conditions prior to extraction. The analytical protocol employed <strong>liquid–liquid extraction</strong> using dichloromethane (DCM) and hexane to recover both polar and nonpolar PCB congeners. Oloy emphasizes that liquid–liquid extraction was selected over solid-phase extraction (SPE) because of concerns about congener retention within sorbent materials and clogging issues associated with large-volume environmental samples.</p><p>Following extraction, concentration and cleanup represented critical analytical stages due to the trace-level occurrence and volatility of PCBs. Silica and alumina cleanup procedures were used to remove matrix interferences prior to instrumental analysis. The concentration workflow combined rotary evaporation for bulk solvent reduction with nitrogen blowdown for final volume reduction to less than 1 mL, while carefully avoiding excessive temperature or complete dryness to minimize analyte loss. Oloy repeatedly stresses that improper concentration procedures are among the most common causes of analytical failure in PCB analysis.</p><p>For instrumental determination, the study utilized <strong>gas chromatography coupled with electron capture detection (GC-ECD)</strong> rather than LC-MS or GC-MS. According to Oloy, GC was preferred because PCBs are sufficiently volatile for gas chromatographic separation, while ECD provided superior sensitivity and selectivity for chlorinated compounds at environmentally relevant concentrations. The interview also discusses analytical validation strategies, including the use of surrogate standards to assess <strong>recoveries,</strong> which ranged from approximately <strong>85% to 114%</strong>, and signal-to-noise-based determination of detection limits.</p><p>The study further examined <strong>seasonal variations in PCB concentrations</strong>, revealing <strong>higher levels during the wet season</strong>. This observation was attributed to rainfall-driven runoff from contaminated infrastructure, sediment resuspension, and lower temperatures that reduce volatilization losses. To communicate toxicological relevance beyond simple concentration reporting, the researchers also calculated <strong>toxic equivalency values (TEQs)</strong>, converting mixtures of PCB congeners into biologically meaningful toxicity estimates comparable to dioxin toxicity metrics.</p><p>Beyond environmental monitoring, Oloy highlights broader research interests focused on <strong>pollutant remediation and sustainable environmental protection</strong>. His group is also involved in developing catalytic materials capable of degrading or removing persistent contaminants from environmental systems. Throughout the discussion, he emphasizes that analytical chemistry plays a central role not only in detecting pollutants, but also in enabling prevention, remediation, and long-term environmental management strategies.</p></div></div></div></div></div></div></section><blockquote><p><strong>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</strong></p></blockquote><blockquote><h4><strong>Concentrating on Chromatography Podcast</strong></h4><p>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!</p><p>You can find <strong>Concentrating on Chromatography Podcast </strong>in podcast apps:</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL"><strong>Spotify</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185"><strong>Apple podcast</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography"><strong>podscan</strong></a></li></ul><p>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos"><strong>YouTube channel</strong></a></p></blockquote>

Tracking Toxic PCBs in River Water using Gas Chromatography–Electron Capture Detection

Article

Product

Application

Video

Scientists

Environment

Food

Presentation

Interview

Science and research

Laboratories

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Bruker

Altium International (HPST)

C&EN

SciY/Mestrelab Research

<p><strong>Increasing interest in microplastics in the environment has resulted in how microplastics may be regulated in this arena.  These initiatives may occur at various levels and by various organizations, from international (e.g., European Chemical Agency, ISO documents) to national and subnational (e.g., federal and state efforts in the U.S.).  They all require standardization of monitoring methods.</strong></p>
<p>This presentation will provide an overview of the state of standardization, and challenges thereof, for microplastics measurement in the aquatic environment, from collection to extraction to quantification (e.g., by spectroscopic analysis).  Particular emphasis is placed on efforts within the State of California, which is the first jurisdiction to require monitoring for microplastics.</p>
<p><strong>Key Learning Objectives:</strong></p>
<ul>
<li>Progress towards standardized methods and testing requirements </li>
<li>What progress has been made in the development of standardized methodologies for microplastics in North America?</li>
<li>What are some of the key challenges that remain in the implementation of these?</li>
<li>How might these developments impact other areas and the potential for the implementation of regulations?</li>
</ul>
<p><strong>Who Should Attend:</strong></p>
<ul>
<li>Microplastics researchers</li>
<li>Microplastics analysts from commercial, QA, or research labs seeking to understand key challenges in Microplastics analysis.<br/>Those interested in the contamination of wastewater, seawater, freshwater, air, sediments, and food (such as fish, shellfish, crustaceans, and bottled water)</li>
</ul>
<blockquote>
<p><strong>Presenter:</strong> Charles Wong (Department Head, Chemistry, Southern California Coastal Water Research Project Authority)</p>
</blockquote>
<blockquote>
<p><strong>Presenter:</strong> Ann Thayer (Contributing Editor, C&amp;EN Media Group)</p>
</blockquote>


Standardizing environmental microplastics measurement for compliance monitoring: A case study of the California program

An overview of the state of standardization for microplastics measurement in the aquatic environment, from collection to extraction to quantification.

Standardizing environmental microplastics measurement

<p><strong>In this webinar we will show you:</strong></p><ul><li>Why FT-IR is the method of choice for particle-driven analysis of microplastics.</li><li>Demands and requirements to establish a microplastic lab based on FT-IR technology.</li><li>Necessary steps in sample preparation from various sources.</li><li>Theoretical basics to understand the idea behind FT-IR analysis of microparticles.</li><li>That there are comprehensive, complete solutions to microplastic analysis, right out of the box.</li></ul><p><strong>You will learn about:</strong></p><ul><li>Instrumental setup and experimentals</li><li>Particle analysis and evaluation</li><li>Microplastic software solutions</li></ul><p><strong>We will cover the basics of:</strong></p><ul><li>Different microplastics analysis techniques</li><li>Sample types</li><li>Sample preparation steps</li><li>FT-IR experimental procedures</li><li>FT-IR instrumentation</li></ul><p><strong>Who should attend:</strong></p><ul><li>Analytical service laboratories</li><li>Environmental researchers</li><li>Food &amp; Feed producers</li><li>Drinks &amp; Beverages producers</li></ul><p>FT-IR and Raman are very versatile analytical techniques - but did you know that Bruker offers by far the most comprehensive product range for spectroscopy? Our instruments cover all applications from routine incoming inspection, to multispectral fundamental research at the highest level, to solutions for in-process monitoring.</p><p>If you are looking for new and innovative solutions to your analytical problems, we welcome you to join our free webinars on spectroscopic measurement techniques, perhaps making your daily work easier.</p><p>Your Bruker Optics Team</p>

Bruker: Why FT-IR FPA Imaging is King in Microplastics Analysis?

Why FT-IR FPA Imaging is King in Microplastics Analysis?

In this webinar we will show you why FT-IR is the method of choice for particle-driven analysis of microplastics.

<p><strong>Reports on the omnipresence of microplastics have focused mainly on their presence in the environment, but there is growing interest in investigating the impact of microplastics in the food we eat.</strong></p><p>We invite you to webinar about Agilent solutions for microplastics analysis: two complementary techniques will be approached:</p><ul><li>LDIR (Laser Direct Infrared)</li><li>GC-MS Technology (Gas Chromatography-Mass Spectrometry)</li></ul><p>Both techniques are essential for the assessment and monitoring of environmental or food pollution by microplastics and the subsequent development of mitigation strategies.</p><p>LDIR technology utilizes a quantum cascade laser detector (QCL) for infrared spectroscopy that offers the ability to process samples in minutes to hours instead of days and also provides an imaging component. GC-MS allows the identification and quantification of microplastics by analyzing the volatile and semi-volatile compounds released after pyrolysis or thermal desorption of the sample. This method offers high sensitivity and specificity allowing the detection of trace microplastics in complex matrices, during this webinar we will present the different options available for µplastics analysis using GCMS detection : Pyr-GCMS, TD-GCMS or TED-GCMS.</p><h5><strong>Key learning points</strong></h5><ul><li>the worldwide microplastic problem</li><li>Clear overview of Micro plastic analysis techniques</li><li>Advantages &amp; Benefits for the different techniques</li><li>Comparison of Pyr-GCMS, TD-GCMS or TED-GCMS.</li><li>Norms in place</li><li>Sample preparation overview</li><li>How is the Reporting and Results</li></ul><blockquote><p><strong>Presenter:</strong> Jan Wuelfken (Product Specialist Molecular Spectroscopy EMEA IDO, Agilent Technologies)</p><p><strong>Presenter:</strong> Bryan White (GC, GCMS Product Specialist UK and Ireland, Agilent Technologies)</p></blockquote>

Altium International: Microplastics Analysis Technologies from Agilent: Overview, comparison, and benefits from the different techniques IR & GCMS/Pyr/TD/TED

Microplastics Analysis Technologies from Agilent: Overview, comparison, and benefits from the different techniques IR & GCMS/Pyr/TD/TED

Webinar about Agilent solutions for microplastics analysis: two complementary techniques will be approached: LDIR and GC-MS.

Microplastics Analysis Technologies from Agilent

<p><strong>Content uniformity and assay are critical quality attributes for solid oral dosage forms, yet traditional wet chemistry methods are time consuming and destructive. In this webinar, we’ll showcase the automated SciYbotic Tablet Testing (TT) system that enables faster, more accurate non-destructive testing for tablet release.</strong></p><p>The system showcases a fully automated workflow for tablet quality testing that integrates robotic handling, 3D vision, and spectroscopic analysis with the Bruker Multi Purpose Analyzer (MPA) to eliminate manual variability and enhance precision. By aligning with Process Analytical Technology (PAT) and Pharma 4.0 goals, the SciYbotic TT enables real-time predictions of API content. It supports efficient, compliant tablet release, demonstrating the transformative impact of automation in pharmaceutical manufacturing.</p><h4><strong>Learning Points</strong></h4><ul><li>You’ll discover how the SciYbotic Tablet Testing (TT) system enables non-destructive, real-time analysis of content uniformity and assay.&nbsp;</li><li>Explore the integration of robotic handling, 3D vision, and spectroscopic analysis by Bruker MPA in a fully automated workflow.&nbsp;</li><li>Learn how the system aligns with PAT and Pharma 4.0 initiatives.&nbsp;</li><li>See how automation enhances precision, compliance, and efficiency in tablet release processes.&nbsp;</li></ul><h4><strong>Who should attend</strong></h4><ul><li>Oral Solid Dose (OSD) manufacturing professionals seeking to modernize quality control.&nbsp;</li><li>Quality assurance and quality control specialists focused on improving tablet release workflows.&nbsp;</li><li>Senior managers, process engineers and automation leads exploring Pharma 4.0 solutions and technology transfer.&nbsp;</li><li>PAT and advanced control strategy experts and leaders.&nbsp;</li></ul><blockquote><p><strong>Presenter:</strong> Andrew Anderson (Consultant)</p><p>Andrew Anderson is a strategic pharma leader with extensive expertise in small molecule development and advanced analytical technologies. At GSK and Johnson &amp; Johnson, he led the technology strategy, roadmaps, automation, and Process Analytical Technology (PAT) across R&amp;D and commercial operations. Recognized for forging impactful government, academic, and cross-pharma partnerships, Andrew promotes innovation through cross-functional leadership and comprehensive tech implementation, delivering measurable improvements in efficiency, data integrity, and resource optimization.</p><p><strong>Presenter: </strong>Matt Jones (Account Manager, SciY)</p><p>Matt Jones is a seasoned automation specialist with over 20 years of experience delivering engineered solutions across highly regulated sectors, including pharmaceuticals, biotechnology, and advanced manufacturing. His work frequently involves the application of process analytical technology (PAT) within custom automation systems designed to meet stringent industry standards.<br>With a strong foundation in vision systems and robotics engineering, Matt has deep expertise in machine integration, control architecture, and data-driven process optimization. He excels at translating complex requirements into scalable, compliant automation platforms that enhance throughput, quality, and traceability.</p><p><strong>Presenter: </strong>Holger Lutz (Business Unit Manager Chemistry, Pharma &amp; Process Applied Spectroscopy - Bruker Optics GmbH &amp; Co. KG)</p><p>PhD in Chemistry at University of Karlsruhe, Germany, focus on Analytical Chemistry. Starting 2002 as a NIR sales person at Bruker Optics. In 2007, took over the sales responsibility of PAT solutions in Germany. In parallel, built up a global sales and support infrastructure for PAT. Since 2018, is business unit manager of the newly created business unit “Chemistry, Pharma &amp; Process”. In this function, is involved in the product management of the new PAT analyzers and related software, supports the global sales &amp; application team, and is the main contact for Key Accounts.</p></blockquote>

SciY: Tablet Release Reinvented: Robotics, Vision, and Spectral Intelligence

Tablet Release Reinvented: Robotics, Vision, and Spectral Intelligence

Learn how automated robotic, vision, and spectroscopic workflows streamline non-destructive tablet testing, compliance, and Pharma 4.0 readiness.

GCMS webinars focusing on FTIR Spectroscopy, Sample prep - page 1