EU Regulation 396/2005: Pesticide Residue Testing and the Critical Role of QuEChERS Evaporation in Food Safety

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 4th May 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application note by Shimadzu, presentation by MDCW / JEOL and technical note by Thermo Fisher Scientific!<h3>1. MDCW / JEOL: Flow-Modulated GCxGC-QMS Analysis Without Splitting Off the GC Flow</h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_16_Jensen_11e29d5022.pdf">Full PDF for download</a></li></ul><section><div><div><div><div><div><div>This presentation by Kirk Jensen (JEOL USA) explores the feasibility of performing flow-modulated comprehensive two-dimensional gas chromatography (GC×GC) coupled with quadrupole mass spectrometry (QMS) without splitting the GC flow, which is traditionally required to protect MS systems from high carrier gas flows. The core concept builds on GC×GC, where compounds are separated using a primary and secondary column connected via a modulator, significantly increasing separation power compared to one-dimensional GC. The presentation contrasts thermal modulation (offering sharper peaks and higher theoretical sensitivity but requiring cryogenic cooling) with flow modulation, which avoids cryogens, handles volatile analytes well, and is more flexible, but typically demands higher gas flows that standard MS systems cannot tolerate .To address this limitation, the study utilizes the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=24&amp;search=JMS-Q1600GC">JEOL JMS-Q1600GC</a> UltraQuad quadrupole GC-MS system, which can accept unusually high carrier gas flows (up to ~20 mL/min), enabling direct coupling with a SepSolve INSIGHT flow modulator without splitting the effluent . The analytical setup includes dual GC columns (e.g., Zebron ZB-5MSplus for the first dimension and BPX50 for the second), high secondary flow rates (~25 mL/min), and electron ionization (EI) MS detection. Additional system components include optional FID detection, bleed line control, and ChromeSpace software for data processing . This configuration allows full analyte transfer into the MS, eliminating the need for flow splitting and potentially improving detection efficiency.Experimental results demonstrate the applicability of this approach to complex mixtures, including a pesticide mixture containing over 200 compounds and real-world samples such as perfumes and fuels. The GC×GC-MS system produced detailed two-dimensional chromatograms with high spectral quality, enabling the correct identification of approximately 120 compounds despite relatively moderate spectral match factors . Comparisons at different flow rates (e.g., 25 vs. 50 mL/min) showed that spectral integrity and compound identification remain robust, indicating that higher flow operation does not significantly compromise MS performance.In conclusion, the work demonstrates that flow-modulated GC×GC-QMS without flow splitting is feasible, provided that the MS system can tolerate high carrier gas flows. While further optimization is needed (e.g., column selection, inlet pressure, and separation conditions), the approach offers a practical alternative to thermal modulation by eliminating cryogens and simplifying operation. Future work will focus on improving sensitivity, optimizing separations, and exploring alternative carrier gases such as hydrogen to reduce costs and expand applicability</div></div></div></div></div></div></section><h3>2. Shimadzu: Detailed Hydrocarbon Analysis by Nexis GC-2030 Using ASTM D6730</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00863_en_eb633bc741.pdf">Full PDF for download</a></li></ul><h5>User Benefits</h5><ul><li>Detailed compositional analysis of gasoline in accordance with ASTM D6730 is feasible using the Nexis GC-2030.&nbsp;</li><li>By employing PONAsolution, a PONA/DHA analysis software, laborious identification tasks can be reduced, and quantitation calculations and report generation can be performed automatically.</li></ul>ASTM D6730 specifies the analysis of hydrocarbons in gasoline and oxygenates such as ethanol, methyl tert-butyl ether (MTBE), and ethyl tert-butyl ether (ETBE) over a boiling point range up to 225 ̊C. Identification and quantification of individual compounds in gasoline are critically important for refinery process control and product quality assurance. In this application news, we report compositional analysis of gasoline conforming to ASTM D6730 using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexis+GC-2030">Nexis GC-2030 gas chromatograph</a>. Gasoline typically comprises over 100 hydrocarbons, making identification tasks highly complex; however, PONAsolution, a PONA/DHA analysissoftware,simplifies this process.<h4>PONAsolution</h4>PONAsolution Ver.6 provides retention index libraries for each relevant standard (ASTM D6730, D6729, D5134, D6733). Identification of n-alkanes automatically corrects the retention times of the remaining several hundred components, thus streamlining the identification process. When only a specific retention region requires adjustment, the two-point identification function is useful (Fig. 1). In the two-point identification procedure, reference and sample chromatograms are compared while assigning corresponding peaks. First, click on an identified component mark in the reference data (Fig. 1, a), then click the matching sample peak (Fig. 1, b). Repeat this for a second pair of peaks. The retention times of components between these two anchor points are then automatically corrected.<h4>Conclusion</h4>Compositional analysis of gasoline in accordance with ASTM D6730 was performed. The combination of SH PONA Tuning Column and SH-1 PONA main column enabled separation of compounds with closely spaced retention times. Moreover, use of PONAsolution software greatly simplifies complex identification tasks.<h3>3. Thermo Fisher Scientific: Fiber optic probes add flexibility to Raman chemical analysis</h3><ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/drx3_flex_tech_note_tn54708_bebb56b870.pdf">Full PDF for download</a></li></ul>Fourier Transform Infrared Spectroscopy (FTIR) and Raman Spectroscopy are non-destructive analytical techniques that rely on the interaction of electromagnetic radiation with molecular vibrations to provide information about the chemical composition and structure of a sample. Despite their similarities, there are some distinct differences between the two techniques. In principle, FTIR is based on the absorption of infrared radiation by molecules and measures changes in dipole moment during molecular vibrations. Raman spectroscopy, on the other hand, is based on the inelastic scattering of monochromatic light and measures changes in polarizability during molecular vibrations.&nbsp;When applied to bulk chemical analysis, both FTIR and Raman spectroscopy can be used to analyze solids, liquids, and gases, but the nature of Raman spectroscopy lends some unique sampling advantages. Additionally, Raman often requires little to no sample preparation. Presented herein are application examples that highlight some of the sampling advantages of Raman spectroscopy. All the spectral data in this technical note were collected using a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2238">Thermo Scientific™ DXR3 Flex Raman Spectrometer</a> equipped with a fiber optic probe. (Fiber optics are readily available for Raman spectroscopy because of the use of visible and NIR light and do not require the exotic materials associated with FTIR fiber optics.) Preliminary tests for all samples were carried out using both 532 nm and 785 nm excitations, and it was determined that the 785 nm laser set gave an overall better balance between fluorescence and Raman scattering efficiency.<h4>Summary&nbsp;</h4>In this technical note, the analyses of a variety of samples by Raman spectroscopy are demonstrated. All samples were analyzed without sample preparation.&nbsp;<ul><li>Precise and localized analysis at the focal point of the Raman-exciting laser allows sampling through glass bottles, blister packaging and plastic containers, which eliminates possible cross contamination and analyst exposure to hazardous materials. The contributions from the packaging and containers depend on the type of container material, the container thickness, and the materials’ chemical compositional complexity, but these contributions can be readily subtracted out when needed.&nbsp;</li><li>Water is a weak Raman scatterer. Raman therefore has reduced water sensitivity, making it a preferred technique for aqueous solution analysis over FTIR. As demonstrated in the analysis of an energy drink, the Raman bands from water can be subtracted from the spectrum of the aqueous solution, leading to the identification of the components of the solution.&nbsp;</li><li>Raman spectroscopy is well suited for the analysis of inorganic materials, especially in identifying the crystal phases and polymorphs, as demonstrated by the analyses of minerals and pigments in a painting.&nbsp;</li><li>Fiber optic probes provide flexibility and ease of maneuverability. This is particularly advantageous when analyzing samples that are difficult to access or manipulate, such as large containers, geological samples and paintings</li></ul>The DXR3 Flex has multiple sampling options available. A properly configured fiber-optic probe is arguably the most versatile accessory for the analysis of bulk solids and liquids. The advantages, both from those inherent to Raman spectroscopy and those resulting from the use of fiber optic probe, provide opportunities for a wide variety of different applications when using the DXR3 Flex Raman Spectrometer.

News from LabRulezGCMS Library - Week 19, 2026

🎤Francis Femi OloyIn this episode of Concentrating on Chromatography, David speaks with Francis Femi Oloy about using chromatography to uncover hidden pollutants in real-world water systems.Femi’s team analyzed polychlorinated biphenyls (PCBs) in six major rivers in southwestern Nigeria — compounds that were banned decades ago but still persist in the environment. Using a workflow that many analytical labs will recognize — liquid–liquid extraction, cleanup, rotary evaporation, nitrogen blowdown, and GC-ECD detection — they quantified 25 PCB congeners at trace levels and linked the results to ecological and human health risk.<h4>In this conversation, we cover:</h4><ul><li>Why legacy pollutants like PCBs still show up today</li><li>Choosing GC-ECD vs LC-MS for halogenated compounds</li><li>Liquid–liquid extraction and matrix cleanup strategies</li><li>Why sample concentration is critical for dilute environmental samples</li><li>How rotovap + nitrogen blowdown work together without losing volatile analytes</li><li>Seasonal trends (why wet season levels were higher)</li><li>Translating concentration data into meaningful risk assessments</li></ul><h3>Video Transcription</h3><section><div><div><div><div><div><div>Persistent organic pollutants such as polychlorinated biphenyls (PCBs) remain a significant environmental concern despite decades of regulatory restrictions. In this interview, Francais Femi Oloy discusses the environmental and analytical challenges associated with monitoring PCB contamination in rivers of southwestern Nigeria, a rapidly industrializing region where urban growth, industrial activity, agriculture, and dense populations intersect with extensive aquatic systems.Oloy explains that his interest in environmental contaminant analysis emerged from observing unexplained health problems and environmental degradation while growing up in Nigeria. This motivated his transition into organic and environmental chemistry, with a focus on identifying pollutants present in drinking water, agricultural soils, and food systems. Southwestern Nigeria, particularly the Lagos region, represents a critical environmental monitoring area due to intense industrial development, shipping activity, and widespread human dependence on rivers for domestic use, agriculture, and fishing.Although PCBs are considered “legacy pollutants” and are no longer intentionally produced, the interview highlights why they continue to persist in aquatic environments. Old electrical transformers and aging industrial equipment still contain PCB residues, while historical contamination stored in river sediments can become remobilized during flooding, dredging, or sediment disturbance. Because PCBs are hydrophobic and resistant to degradation, they preferentially accumulate in sediments and bioaccumulate through aquatic food chains, creating long-term environmental and human exposure risks.A major focus of the discussion centers on the analytical workflow used for PCB determination in environmental water samples. Composite river water samples were collected in amber glass bottles to avoid contamination and photodegradation, preserved with sodium azide to minimize microbial activity, and stored under cooled conditions prior to extraction. The analytical protocol employed liquid–liquid extraction using dichloromethane (DCM) and hexane to recover both polar and nonpolar PCB congeners. Oloy emphasizes that liquid–liquid extraction was selected over solid-phase extraction (SPE) because of concerns about congener retention within sorbent materials and clogging issues associated with large-volume environmental samples.Following extraction, concentration and cleanup represented critical analytical stages due to the trace-level occurrence and volatility of PCBs. Silica and alumina cleanup procedures were used to remove matrix interferences prior to instrumental analysis. The concentration workflow combined rotary evaporation for bulk solvent reduction with nitrogen blowdown for final volume reduction to less than 1 mL, while carefully avoiding excessive temperature or complete dryness to minimize analyte loss. Oloy repeatedly stresses that improper concentration procedures are among the most common causes of analytical failure in PCB analysis.For instrumental determination, the study utilized gas chromatography coupled with electron capture detection (GC-ECD) rather than LC-MS or GC-MS. According to Oloy, GC was preferred because PCBs are sufficiently volatile for gas chromatographic separation, while ECD provided superior sensitivity and selectivity for chlorinated compounds at environmentally relevant concentrations. The interview also discusses analytical validation strategies, including the use of surrogate standards to assess recoveries, which ranged from approximately 85% to 114%, and signal-to-noise-based determination of detection limits.The study further examined seasonal variations in PCB concentrations, revealing higher levels during the wet season. This observation was attributed to rainfall-driven runoff from contaminated infrastructure, sediment resuspension, and lower temperatures that reduce volatilization losses. To communicate toxicological relevance beyond simple concentration reporting, the researchers also calculated toxic equivalency values (TEQs), converting mixtures of PCB congeners into biologically meaningful toxicity estimates comparable to dioxin toxicity metrics.Beyond environmental monitoring, Oloy highlights broader research interests focused on pollutant remediation and sustainable environmental protection. His group is also involved in developing catalytic materials capable of degrading or removing persistent contaminants from environmental systems. Throughout the discussion, he emphasizes that analytical chemistry plays a central role not only in detecting pollutants, but also in enabling prevention, remediation, and long-term environmental management strategies.</div></div></div></div></div></div></section><blockquote>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</blockquote><blockquote><h4>Concentrating on Chromatography Podcast</h4>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!You can find Concentrating on Chromatography Podcast in podcast apps:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL">Spotify</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185">Apple podcast</a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography">podscan</a></li></ul>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos">YouTube channel</a></blockquote>

Tracking Toxic PCBs in River Water using Gas Chromatography–Electron Capture Detection

Article

Product

Application

Video

Scientists

Environment

Food

Presentation

Interview

Science and research

Laboratories

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Agilent Technologies

Bruker

Thermo Fisher Scientific

SelectScience

This session will feature basics of FTIR measurements, using the most common sampling accessories.
<blockquote>
Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.
</blockquote>

Agilent Technologies: Anyone Can Collect FTIR Spectra

Anyone Can Collect FTIR Spectra

This session will feature basics of FTIR measurements, using the most common sampling accessories.

Can the TopScan 4300 FTIR test liquid? What is the detection limit of the 4300 FTIR? Is ambient light an issue for Vaya Raman spectrometer?
Lets discuss some of the most common questions about Agilent Handheld spectrometers.
<blockquote>
Presenter: Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.
</blockquote>

Agilent Technologies: Common Handheld FTIR and Raman Questions Answered

Common Handheld FTIR and Raman Questions Answered

Lets discuss some of the most common questions about Agilent Handheld spectrometers.

This first session of a four-part ‘Fundamentals of Spectroscopy’ course, will examine core concepts essential to understanding common optical spectroscopy methods.
In this session, Adam Wise, and applications specialist from Andor will explain how light – an electromagnetic wave – passes through, bounces off, gets absorbed by, and is made by, atoms, molecules and solids. This session is in no way designed to replace a long and rigorous course of study, but instead tries to show a physical model of the language used to describe spectroscopy, as well as define a common vocabulary that will be relied on as the course continues.
Key learning objectives
<ul>
<li>Understand that what a spectrometer ‘sees’ differs from our perception of color, both in terms of finer resolution, and no hard limits on the energies of light that can be detected</li>
<li>Discover a simple but meaningful model of how the electric field of light interacts with electrical charges in atoms and molecules</li>
<li>Recognize how the wavelength and energy of light relate to different size scales and emission/absorption processes within atoms, molecules, and bulk matter</li>
</ul>
Who should attend?
<ul>
<li>Academic Researcher</li>
<li>R&amp;D Scientist</li>
<li>Lab Technician</li>
<li>Principal Investigator</li>
<li>Laboratory Manager</li>
<li>Manager</li>
<li>Postdoctoral Research Assistant</li>
<li>Corporate Manager</li>
<li>PhD Student</li>
<li>Undergraduate Student</li>
<li>Engineer or Software Engineer</li>
<li>Teaching Fellow</li>
</ul>
<blockquote>
Presenter: Adam Wise (Andor Technology)
</blockquote>
<blockquote>
Adam Wise is an applications scientist at Andor Technology, specializing in spectroscopy and scientific cameras. He earned his PhD working with John Grey at the University of New Mexico, studying Raman spectroscopy of organic semiconductors. After his postdoctoral research at UMass Amherst, Wise entered the field of optical instrumentation, and continues to support research by helping scientists get the right cutting-edge tools.
</blockquote>
<blockquote>
Presenter: Georgina Wynne Hughes (Editorial Team)
</blockquote>
<blockquote>
Georgina studied at Birmingham University where she gained a BSc in Biomedical Science, and an MSc by Research in Cancer and Genomic Sciences, which focused on defective autophagy in rare neurodegenerative diseases. As a member of the Editorial team, she now plays an integral role in shaping the content on SelectScience.
</blockquote>

SelectScience: The basic physics of spectroscopy: Light-matter interaction for fun and profit

The basic physics of spectroscopy: Light-matter interaction for fun and profit

‘Fundamentals of Spectroscopy’ course, will examine core concepts essential to understanding common optical spectroscopy methods.

The basic physics of spectroscopy: Light-matter interaction

In this third session of a four-part ‘Fundamentals of Spectroscopy’ course, having previously covered the ‘why’, we’ll now focus on the ‘how’. There is currently a dizzying array of tools available for spectroscopy, but the fundamental goal remains the same.
Here we will discuss the current state-of-the-art common spectroscopy components – spectrometers, detectors, and associated optics – as well as their historical development. We will discuss some of the technological breakthroughs that have made the heroic measurements of yesterday commonplace practice today, as well as how different equipment has evolved to suit the particular needs of different experiments.
Key learning objectives
<ul>
<li>Discover the function of a spectrograph and how the earliest spectrographs achieved this</li>
<li>Understand the difference between a prism and grating spectrograph and learn why grating spectrographs are significantly more common</li>
<li>Consider what is meant by “dispersion” in a spectrometer, what is spectral resolution, and how the two concepts relate to each other</li>
</ul>
Who should attend?
<ul>
<li>Academic researchers</li>
<li>R&amp;D scientists</li>
<li>Lab technicians</li>
<li>Principal investigators</li>
<li>Laboratory, facilities or corporate managers</li>
<li>Postdoctoral research assistants</li>
<li>Undergraduate and PhD students</li>
<li>Engineers or software engineers</li>
<li>Teaching fellows</li>
</ul>
<blockquote>
Presenter: Adam Wise (Andor Technology)
</blockquote>
<blockquote>
Adam Wise is an applications scientist at Andor Technology, specializing in spectroscopy and scientific cameras. He earned his PhD working with John Grey at the University of New Mexico, studying Raman spectroscopy of organic semiconductors. After his postdoctoral research at UMass Amherst, Wise entered the field of optical instrumentation, and continues to support research by helping scientists get the right cutting-edge tools.
</blockquote>
<blockquote>
Presenter: Georgina Wynne Hughes (Editorial Team)
</blockquote>
<blockquote>
Georgina studied at Birmingham University where she gained a BSc in Biomedical Science, and an MSc by Research in Cancer and Genomic Sciences, which focused on defective autophagy in rare neurodegenerative diseases. As a member of the Editorial team, she now plays an integral role in shaping the content on SelectScience.
</blockquote>

SelectScience: Optimizing equipment for optical spectroscopy

Optimizing equipment for optical spectroscopy

In this third session of a four-part ‘Fundamentals of Spectroscopy’ course, having previously covered the ‘why’, we’ll now focus on the ‘how’.

IR spectroscopy is a ubiquitous analytical technique that was first used during World War II. Since that time it has undergone significant development, providing a means for the analysis of many types of samples both in the laboratory and in the field.
This session will focus on the theory of Infrared and will discuss some modern infrared analytical techniques.
<blockquote>
Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)
</blockquote>
<blockquote>
Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.
</blockquote>

Agilent Technologies: A discussion on the Theory of FTIR

A discussion on the Theory of FTIR

This session will focus on the theory of Infrared and will discuss some modern infrared analytical techniques.

We kindly invite you to join us for this live webinar: An Introduction to Nanoscale Infrared Spectroscopy and Imaging with Photothermal AFM-IR. Infrared (IR) spectroscopy is a commonly used characterization technique for organic materials and many inorganic compounds and crystals. While powerful, it is limited by the diffraction limit to resolution on the order of several microns, and the lateral resolution is strongly dependent on the wavelength. Photothermal AFM-IR&nbsp;is a novel technique which offers IR spectroscopy and imaging on materials with a lateral resolution 1000x better than traditional FTIR and &lt;1 nm detection sensitivity with model-free interpretation. AFM-IR achieves this by using an AFM probe as the detector of photothermal expansion. This opens a variety of applications on both organic and inorganic materials where nanometer sensitivity and resolution are key.<div> In this webinar we will:</div><ul><li>Introduce the photothermal AFM-IR technique</li><li>Explore the surprisingly simple mechanism underlying the technique</li><li>Highlight a few of its many broad applications</li><li>Offer a demonstration of photothermal AFM-IR on the Dimension IconIR system</li></ul><blockquote>Presenter: Peter De Wolf, Ph.D., (Director of Technology &amp; Application Development)Peter De Wolf is director for AFM technology &amp; application development at Bruker Nano Surfaces, covering all applications related to Scanning Probe Microscopy (SPM). He obtained his PhD from IMEC, Belgium on the development of new SPM methods for 2D carrier profiling in semiconductors and has more than 25 years of experience on SPM. He is the author and co-author of over 30 publications related to electrical characterization using SPM. He also owns several SPM patents, and developed several new SPM modes for electrical characterization.Presenter: Cassandra Phillips, Ph.D. (Application Scientist, Bruker)Cassandra did her Ph.D. at the University of Toronto exploring the photophysics of boron nitride nanotubes using scattering scanning nearfield optical microscopy (s-SNOM) and computational models. She has been working at Bruker Nano Surfaces and Metrology since September 2019 as an Applications Scientist focusing on nanoscale IR spectro-microscopy and other correlated imaging techniques realized with atomic force microscopy.Presenter: Dr. Qichi Hu, (Senior Applications Scientist )Qichi is currently a Senior Staff Applications Scientist at Bruker Nano. He received a bachelor’s degree from Peking University and Ph.D. from University of British Columbia. He then did postdocs in U.S. university and national labs. Qichi has been working on nanoIR development and applications for over a decade, at Anasys and now at Bruker.</blockquote>

Bruker: Introduction to Nanoscale Infrared Spectroscopy and Imaging with Photothermal AFM-IR

Introduction to Nanoscale Infrared Spectroscopy and Imaging with Photothermal AFM-IR

An Introduction to Nanoscale Infrared Spectroscopy and Imaging with Photothermal AFM-IR.

Nanoscale IR Spectroscopy / Imaging with Photothermal AFM-IR

The scary details of FTIR and data collection will be explained<blockquote>Presenter: Louis Tisinger, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)Louis (Lou) Tisinger has a Ph.D. in Analytical Chemistry from Miami University in Oxford Ohio, where his graduate research involved the study of ATR imaging and microscope performance in vibrational spectroscopy. Most of his career has been related to pre- and post-sales support of FTIR spectrometers, microscopes, imaging systems, and thermal analytical instruments, focusing on analyzing customer samples, demonstrations, post-sales training, troubleshooting, and R&amp;D.</blockquote>

FTIR Theory

The scary details of FTIR and data collection will be explained

FT-IR spectroscopy is an easy-to-use and nondestructive analysis tool for chemical identification, quantification, composition analysis, optical characterization and many more. Depending on measurement geometry (beside transmission measurement) and optical properties of sample materials FT-IR can be very surface sensitive. It provides plenty of surface analysis techniques with different penetration depth to qualitatively or quantitatively characterize the upper layer of a sample, to follow surface reactions or to observe surface emissions etc. Depending on sample form, e.g. powder, gel, liquid, crystal blocks, coatings, micro sized samples or else, different FT-IR techniques can be applied.In this Webinar You Will Learn:<ul><li>Attenuated Total Reflection - ATR</li><li>Diffuse Reflectance Infrared Fourier Transform Spectroscopy - DRIFT</li><li>Specular Reflectance</li><li>InfraRed Reflection Absorption Spectroscopy - IRRAS</li><li>Emission Spectroscopy</li><li>Photo Acoustic Spectroscopy - PAS</li></ul>Who Should Attend?<ul><li>Surface analysis experts (e.g. material science, polymers, automotive…)</li><li>Spectroscopy experts (e.g. academia, physicists, chemists…)</li><li>Microscopy experts (e.g. research, pharmaceuticals, electronics… )</li></ul><blockquote>Presenter: Dr. Xia StammerDr. Xia Stammer studied Physical Chemistry and focused on surface functionalization and characterization during her PhD and research activities. She has been FT-IR application specialist since almost 10 years at Bruker and is specialized for FT-IR research solutions for catalysis, material science and surface analysis.Presenter:&nbsp;Dr. Inga Köhler&nbsp;Dr. Inga Köhler studied Geology and Paleontology and acquired her PhD with focus on Early Earth. Inga has a strong interest in communicating scientific topics to the public and continues to contribute to Archean research. At Bruker, she works as a Scientific Content Creator for FT-IR and Raman spectroscopy as well as microscopy.</blockquote>

Bruker: Shed Light on Surface | How to use FT-IR to characterize surfaces  

Shed Light on Surface | How to use FT-IR to characterize surfaces

In this webinar, you will learn about various FT-IR techniques for surface characterization.

How to use FT-IR to characterize surfaces  

<div><div container-id="cq-colctrl-lt0" comp-id="A1"><div>We are pleased to invite you to upcoming Webinar on "Exploring analytical methods &amp; applications in polymer science." This event is free to attend will cover key techniques such as Rheology, FTIR, NIR, Process Raman, XRF, XRD, and TGA, highlighting their roles in understanding polymer properties and optimizing processes.Join to learn how these methods can enhance material design, quality control, and performance. Gain insights into the latest advancements and applications in polymer science.<h3>Webinar Schedule</h3><h4>Day 1: Introduction to analytical methods</h4>Tuesday, September 30, 2025, | 10:00-11:15 UTC+1 &nbsp;&nbsp;<h5>Session 1: Basics of polymer rheology</h5><ul><li>Speaker: Dr. Fabian Meyer</li></ul>In this session, Dr. Fabian Meyer will introduce the fundamental concepts of polymer rheology. Rheology is the study of the flow and deformation of matter, which is crucial in understanding material properties and behaviour during processing. Dr. Meyer will cover:<ul><li>Key rheological properties and their measurement</li><li>Applications in various industries</li><li>Practical examples and case studies to illustrate the concepts</li></ul><h5>Session 2: Basics of FTIR, NIR and Raman Spectroscopy/Applications</h5><ul><li>Speaker: Mr. Shailesh Karavadra</li></ul>Mr. Shailesh Karavadra will guide you through the basics of Fourier Transform Infrared (FTIR), Near-Infrared (NIR), and Raman Spectroscopy. These techniques are essential for material characterization and identification. The session will include:<ul><li>Introduction to FTIR, NIR, and Raman Spectroscopy</li><li>How these techniques work and their differences</li><li>Applications in Polymers, plastics and recycling</li></ul><h5>Session 3: Basics of XRF and XRD Applications</h5><ul><li>Speaker: Dr. Simon Welzmiller</li></ul>Dr. Welzmiller will present an overview of X-ray Fluorescence (XRF) and X-ray Diffraction (XRD) techniques. These methods are widely used for elemental analysis and crystallographic studies. The session will cover:<ul><li>Fundamental principles of XRF and XRD</li><li>How these techniques are applied in material science and engineering</li><li>Examples of real-world applications and data interpretation</li></ul><blockquote>Presenter: Meyer, Fabian (Teamleiter Applikation Lab, Production Process and Analytics)Presenter: Karavadra, Shaileshkumar N. (Sr Manager, Sales Development/Product Specialists Chemical Analysis Division)Presenter: Welzmiller, Simon (Global Application Specialist XRD, Production Process and Analytics)</blockquote></div></div></div>

Thermo Fisher Scientific: Advanced analytical methods in polymer science webinar series

Advanced analytical methods in polymer science, Part 1

Join a free webinar on polymer science. Explore rheology, FTIR, NIR, Raman, XRF, and XRD to boost material analysis, quality, and performance.

FTIR spectroscopy is a powerful analytical technique that connects molecular vibrations to practical chemical measurements. In this webinar, we review the fundamentals of FTIR spectroscopy, including how infrared absorption arises from molecular structure, why IR spectra provide unique chemical fingerprints, and how quantitative information can be extracted using Beer–Lambert–based calibration with carefully selected spectral bands. These core concepts form the foundation for applying FTIR reliably to complex chemical systems, including aqueous samples, using the Agilent Cary 630 FTIR spectrometer.&nbsp;The webinar then transitions to the practical challenge of measuring oil and grease in water—an important requirement for wastewater, process water, and environmental monitoring. ClearShot™ Extraction Technology, developed by OSS Maine, provides a cost-effective, safe, and accurate approach for quantifying total oil and grease without the use of hazardous solvents. When paired with FTIR analysis, this workflow enables rapid measurements across a wide concentration range, supporting efficient, reliable water analysis.<blockquote>Presenter:&nbsp; Yanqia Wang, PhD (Application Engineer, Molecular Spectroscopy, Agilent Technologies, Inc.)Dr. Yanqia Wang started working for Agilent Technologies Inc. as a FTIR application Engineer in 2013, providing pre-&amp;post-sale application support. The products he covers from Bench-top FTIR microscopes to various Mobile FTIR spectrometers. Dr. Wang received his PhD of analytical chemistry from Duke University in 2004, doing dynamic IR spectroscopy research. Then he joined Fitzpatrick Center for Photonics at Duke University, doing Tissue Raman spectrometer instrumentation. Since 2007, Dr. Wang worked for Avery Dennison Corp. as a spectroscopist, providing molecular analytical support to the research &amp; development.</blockquote>

Agilent Technologies: Molecular spectroscopy webinars

FTIR in Action: From Spectroscopy Fundamentals to Oil and Grease Analysis in Water

Webinar on FTIR fundamentals and oil & grease analysis in water using ClearShot™ extraction and Agilent Cary 630 for rapid, reliable environmental testing.

GCMS webinars focusing on Academy/Principles, FTIR Spectroscopy - page 1