<p><strong>In this technical tip from </strong><span><strong>Phenomenex</strong></span><strong>, the topic of gas chromatography (GC) column trimming is addressed from a troubleshooting perspective. The key question explored is whether trimming a GC column is necessary and how it impacts chromatographic performance.</strong></p><h3><strong>Why Trim a GC Column?</strong></h3><p>Column trimming is primarily used to <strong>restore chromatographic performance</strong> by removing damaged or contaminated sections, typically located at the column inlet.</p><h5><strong>1. Baseline Bleed, Noise, Ghost Peaks, Poor Peak Shape</strong></h5><ul><li><strong>Cause:</strong> Column contamination</li><li>Removing the contaminated stationary phase at the column entrance helps restore performance.</li></ul><h5><strong>2. Elevated Baseline (Especially at High Temperature)</strong></h5><ul><li><strong>Cause:</strong> Column bleed</li><li>Degradation of the stationary phase due to <strong>oxygen exposure or thermal damage</strong> leads to increased baseline.</li></ul><h5><strong>3. Ghost Peaks (Peaks Without Injection)</strong></h5><ul><li><strong>Cause:</strong> Residual sample or contamination</li><li>Compounds trapped at the beginning of the column can appear as peaks even when no sample is injected.</li></ul><h5><strong>4. Peak Tailing (Asymmetrical Peaks)</strong></h5><ul><li><strong>Cause:</strong> Damaged or contaminated column sections</li><li>These issues result in <strong>adsorption effects or poor flow dynamics</strong>.</li></ul><h5><strong>5. Retention Time Shifts</strong></h5><ul><li><strong>Cause:</strong> Contamination or damage near the inlet</li><li>Although trimming slightly changes retention time, it can correct shifts caused by inlet-side issues.</li></ul><h5><strong>6. Baseline Noise and Spikes</strong></h5><ul><li><strong>Cause:</strong> Particulate matter or degraded stationary phase</li><li>These can lead to <strong>detector instability</strong> and random signal fluctuations.</li></ul><h5><strong>7. Baseline Drift or Wander</strong></h5><ul><li><strong>Cause:</strong> Contamination or oxidized column sections</li><li>Removing these regions stabilizes the baseline.</li></ul><h5><strong>8. Loss of Resolution or Sensitivity</strong></h5><ul><li><strong>Cause:</strong> General column degradation</li><li>Trimming removes the most exposed and damaged portions, effectively <strong>rejuvenating column performance</strong>.</li></ul><h3><strong>How to Trim a GC Column</strong></h3><p>A capillary GC column consists of:</p><ul><li><strong>Polyimide outer coating</strong> (protective layer)</li><li><strong>Fused silica tubing</strong> (fragile but flexible core)</li></ul><h3><strong>Step-by-Step Procedure</strong></h3><h5><strong>1. Scoring the Column</strong></h5><ul><li>Use a <strong>ceramic wafer</strong></li><li>Hold it at an <strong>inclined angle</strong></li><li>Score the polyimide coating <strong>perpendicular to the column</strong></li></ul><h5><strong>2. Breaking the Column</strong></h5><ul><li>Perform a <strong>quick, decisive flick</strong></li><li>This ensures a <strong>clean, square cut</strong></li></ul><h5><strong>3. Inspecting the Cut</strong></h5><p>After trimming, visually inspect the column end.</p><h3><strong>Examples of Column Cuts</strong></h3><h4><strong>Good Cut</strong></h4><ul><li>Clean, <strong>square end</strong></li><li>Ensures proper sealing and connection</li></ul><h5><strong>Bad Cuts</strong></h5><ul><li><strong>Slight Irregularity</strong><ul><li>Small imperfection at the edge</li><li>Can cause <strong>leaks</strong> and <strong>active sites</strong></li></ul></li><li><strong>Poor / Rough Cuts</strong><ul><li>Uneven or jagged edges</li><li>Lead to:<ul><li>Poor connections</li><li>Active sites</li><li>Peak tailing</li></ul></li></ul></li></ul><h2><strong>Conclusion</strong></h2><p>Trimming a GC column is a simple yet effective troubleshooting step. By removing contaminated or damaged sections—especially near the inlet—it can resolve a wide range of chromatographic issues, including baseline instability, ghost peaks, and loss of performance.</p><p>Proper cutting technique is essential to avoid introducing new problems such as leaks or active sites.</p>

Trimming a GC Column: Purpose, Symptoms, and Proper Technique

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 30th March 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Agilent Technologies, Thermo Fisher Scientific, </strong>brochure by<strong> Shimadzu </strong>and presentation by<strong> MDCW / LECO!</strong></p><h3><strong>1. Agilent Technologies: Extraction and Analysis of Pesticides from Water by Solid Phase Extraction and GC/MS</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_extraction_analysis_pesticides_water_gcms_5994_8996en_agilent_28fc35d0e7.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Drinking water is defined as water intended for human consumption obtained from different sources. Several guidelines/regulations exist for ensuring that undesirable substances such as pesticides are not present in excessive amounts that may be harmful to human health. These regulations ensure that water intended for human consumption can be consumed safely. In India, the Bureau of Indian Standards (BIS) has set regulatory limits for residual pesticides in drinking water (IS 10500)<sup>1</sup> , packaged drinking water (IS 14543)<sup>2</sup> , and natural mineral water (IS 13428).<sup>3</sup> A total of 26 pesticides are regulated by BIS standards, of which four compounds (monocrotophos, phorate, 2,4-D, and isoproturon) are more suitable for analysis by liquid chromatography.&nbsp;</p><p>EPA Method 525.2 is a general-purpose method for determination of organic compounds in finished drinking water or water from any source or treatment stage.<sup>4</sup> This method is applicable to a range of organic compounds that are partitioned from the water sample onto a C18 organic phase packed in a disk or cartridge. The organic compounds are then eluted using a suitable eluent, concentrated, and analyzed by GC/MS.&nbsp;</p><p>This application note describes the use of EPA Method 525.2 for extraction of pesticide residues at trace levels in water using solid-phase extraction (Agilent Bond Elut C18: Straight barrel cartridges, p/n 12102118) and analysis using Agilent 8890-5977 GC/MS.&nbsp;</p><p>Excellent linearity with R2 &gt; 0.995 was obtained for all pesticides considered for the study. Recoveries were obtained in the range of 80–120% with associated RSDs &lt; 15% at 0.005–0.080 ng/mL level of fortification.</p><h4><strong>Experimental</strong></h4><h5><strong>Instrument parameters</strong></h5><ul><li><strong>GC:</strong> <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=8890"><strong>Agilent 8890</strong></a></li><li><strong>Column:</strong> Agilent <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=J%26W+HP-5ms"><strong>J&amp;W HP-5ms</strong></a> UI 30 m × 0.25 mm, 0.25 μm&nbsp;</li><li><strong>Carrier Gas:</strong> Helium, constant flow, 1.2 mL/min&nbsp;</li><li><strong>Inlet:</strong> Agilent Multimode Inlet (MMI)</li><li><strong>MS:</strong> <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=5977"><strong>5977 GC/MS</strong></a></li></ul><h4><strong>Conclusion&nbsp;</strong></h4><p>A simple, easy, and efficient method based on EPA 525.2 was implemented for the determination of 22 pesticides in water. The method demonstrated good sensitivity, precision, and accuracy, and allows for rapid analysis. The results demonstrate that pesticide residues can be detected below the current maximum residue levels (MRL) required by the BIS specifications. Acceptable recoveries and precision were obtained at concentrations as low as 5 ng/L for all pesticides. The method is ideally suited for use in a regulatory laboratory for the determination of pesticides in surface, drinking, and packaged drinking water.</p><h3><strong>2. MDCW / LECO: Exploring PFAS in Consumer Goods Using GCxGC and High-Resolution Mass Spectrometry</strong></h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_3_Alonso_6f61e3ea43.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Per- and polyfluoroalkyl substances (PFAS) are widely used in consumer and industrial products due to their unique physicochemical properties, but their persistence and potential health risks have made their detection increasingly important. This study focuses on developing an untargeted analytical approach for screening PFAS and related compounds in consumer goods using advanced chromatographic and mass spectrometric techniques.</p><p>The analytical workflow combines gas chromatography with time-of-flight mass spectrometry (GC-TOFMS) and comprehensive two-dimensional gas chromatography coupled with high-resolution TOFMS (GC×GC-HRTOFMS), using systems such as the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1097"><strong>LECO Pegasus® BTX</strong> </a>and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/38"><strong>Pegasus® HRT+</strong></a> platforms. Sample introduction is performed via thermal desorption or pyrolysis, enabling analysis of both volatile and complex matrices. High-resolution MS provides accurate mass measurements and elemental composition, which are essential for identifying unknown compounds and reducing matrix interferences.</p><p>In the first case study, anti-fog solutions were analyzed and found to contain a wide range of compounds, including fluorotelomer alcohols and related PFAS species. While GC-TOFMS enabled initial screening, high-resolution TOFMS was necessary to characterize unknown compounds through accurate mass determination and complementary ionization techniques (EI and PCI). This approach allowed tentative structural assignment using external databases, demonstrating the importance of HRMS in identifying compounds not present in standard libraries.</p><p>The second case study focused on chewing gum, a highly complex matrix with diverse chemical constituents and trace-level analytes. The use of GC×GC-HRTOFMS significantly improved chromatographic separation and spectral clarity, enabling detailed profiling of volatile and semi-volatile compounds. A dedicated PFAS screening workflow based on mass defect analysis and spectral filtering was applied, leveraging the characteristic CF₂ patterns of PFAS molecules to simplify data interpretation.</p><p>Despite the complexity of the sample, no PFAS were detected in the chewing gum, its packaging, or the box. Overall, the study demonstrates that combining GC×GC separation, high-resolution mass spectrometry, and advanced data processing tools provides a powerful and reliable strategy for untargeted PFAS screening in complex consumer products, particularly when unknown or emerging contaminants are of concern.</p><h3><strong>3. Shimadzu: Gas Chromatograph Nexis GC-2060</strong></h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/c184_e056_06c3456516.pdf"><strong>Full PDF for download</strong></a></li></ul><p>The Shimadzu <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=3&amp;search=Nexis+GC-2060"><strong>Nexis GC-2060</strong></a> represents a new generation of gas chromatographs, built on over 70 years of GC development and designed to serve as a flexible and future-proof analytical platform. It integrates the concept of <i>Analytical Intelligence</i>, which enables automated system monitoring, troubleshooting, and optimization, helping both experienced and less experienced users achieve reliable and consistent results. The system is highly configurable, supporting up to two injectors, three injection units, and four detectors simultaneously, allowing a single instrument to cover multiple analytical applications.</p><p>A key advantage of the Nexis GC-2060 is its versatility in sample introduction and detection. The Multi-Mode Injection Unit (MMI) supports a wide range of injection techniques, including split/splitless, PTV, direct injection, large-volume injection (LVI), and thermal desorption, significantly reducing the need for complex sample preparation. The system is also equipped with next-generation detectors such as FID and TCD, offering high sensitivity, stability, and linearity, with additional detector options (ECD, FPD, FTD, BID) enabling broad application coverage.</p><p>The instrument is designed to maximize laboratory efficiency and minimize downtime. Features such as tool-free column installation (ClickTek), automated startup/shutdown, Easy sTop maintenance mode, and Clean Pilot for automated column conditioning simplify routine operation and reduce manual intervention. In addition, Eco Idling technology automatically optimizes gas and power consumption during standby, significantly lowering operational costs while maintaining readiness for analysis.</p><p>From an analytical performance perspective, the Nexis GC-2060 delivers excellent reproducibility and sensitivity, supported by advanced autosamplers (e.g., AOC-30) and compatibility with third-party systems. The platform supports hydrogen carrier gas for faster analysis and includes smart gas management features such as automatic gas switching. Its modular design allows seamless integration with various sample preparation systems, autosamplers, and detectors, ensuring adaptability to evolving laboratory needs.</p><p>Overall, the Nexis GC-2060 combines high performance, operational efficiency, and flexibility in a single platform, making it suitable for a wide range of applications, including pharmaceutical analysis, environmental testing, food analysis, and energy-related measurements. Its scalability and continuous software updates ensure long-term usability and alignment with future analytical requirements.</p><h3><strong>4. Thermo Fisher Scientific: Accurate multi-component blast furnace gas analysis maximizes iron production and minimizes coke consumption</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/epm_AN_Iron_Production_Prima_PRO_bd5de98b44.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Over a billion tonnes of iron a year are produced in blast furnaces, representing around 94% of global iron production¹. The blast furnace consists of a large steel stack, lined with refractory brick. Iron ore, coke and limestone are dropped into the top of the furnace and preheated air blown into the bottom through nozzles called ‘Tuyeres’. Iron oxides are reduced in the melting zone, or ‘Bosh’, forming liquid iron (called ‘hot metal’) and liquid slag. These liquid products are drained from the furnace at regular intervals, and the blast furnace will run continuously for several years, until the refractory lining needs replacing.</p><p>Analysis of carbon monoxide (CO) and carbon dioxide (CO₂) give vital information on the efficiency of the reduction processes. Historically, two non-dispersive infrared (NDIR) analyzers were used, one to measure CO, the other CO₂. Additional discrete analyzers were required to monitor oxygen and hydrogen – typically paramagnetic O₂ analyzers and thermal conductivity analyzers for H₂.&nbsp;</p><p>Thermo Scientific™ process mass spectrometers have been widely used for many years for key gas analysis applications in iron and steel plants, including blast furnace, basic oxygen steelmaking, coke oven gas analysis, secondary steel process control, fuel gas analysis and direct reduction iron processes²</p><h4><strong>Process control requirements&nbsp;</strong></h4><p>The advantages of process MS over conventional analysis techniques have been proven over many years in the iron and steel industry. The ability to measure a wide range of components on a single analyzer, coupled with advanced calibration, data transmission, and self-diagnostic software, makes the modern mass spectrometer ideal for integration into the modern plant. On blast furnaces, superior gas analysis is being used to calculate gas efficiency, mass and heat balances, and heat profiles through probe analysis, as well as being an essential tool in the early detection of cooling water leaks and sample system failures.&nbsp;</p><p>Figure 2 shows 64 hours of data from a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2305"><strong>Thermo Scientific™ Prima™ PRO Process MS</strong></a> monitoring the six gases in a blast furnace top gas every 10 seconds. The pulse every 12 hours is generated by an automatic nitrogen blowback from the sample conditioning system, to keep the sample probe clear of particulates.</p><h4><strong>Hydrogen analysis&nbsp;</strong></h4><p>An increase in the hydrogen level in the furnace can indicate a leak from the furnace cooling system, as water dissociates into hydrogen and oxygen in the furnace. This has implications both for plant efficiency and plant safety. Water leaks will lower the furnace temperature, causing heat loss and a consequent increase in fuel consumption. In extreme cases, damage to plant and personnel can be caused by ignition of these hazardous mixtures of explosive gases.&nbsp;</p><p>Figure 4 shows a plot of top gas hydrogen concentration measured by Thermo Scientific process MS over a 24-hour period, with the departure of the measured H2 value from that predicted by the mass balance model indicating a water leak. This leak was caused by the failure of a cooling member, and the furnace was taken off blast for repair. The mass spectrometer’s ability to provide fast, accurate hydrogen analysis removes the need for an additional discrete analyzer.&nbsp;</p><p>Gas composition measurement is particularly important during the end-of-campaign blowdown that takes place prior to rebuilds and relines, because explosive gas mixtures can be generated.&nbsp;</p><h4><strong>Probe analysis&nbsp;</strong></h4><p>The fast analysis provided by MS offers another significant advantage over discrete analyzers—a number of process streams can be analyzed using a single instrument. This is achieved using a fully automated multi-inlet system, designed to switch between sample streams at high speeds with minimal sample flushing times. For example, as well as furnace top gas, the MS can also analyze gases from probes placed above and below the burden (the furnace charge of iron ore, coke and limestone). These are known as above-burden and sub-burden probes and provide valuable information on fuel efficiency, iron conversion and furnace charging. Figure 5 shows a schematic of these two probes; they can be moved across the furnace to build a cross-sectional profile of the furnace.</p><h4><strong>Summary&nbsp;</strong></h4><p>Thermo Scientific process mass spectrometers have been successfully monitoring blast furnace off gas at many of the world’s iron and steel companies for over 30 years. For a blast furnace producing 5,000 tonnes a day, a reduction in coke consumption of just 10 kg per tonne of iron produced provides a payback of over $10,000 a day. Users report that the combination of fast, accurate MS gas analysis for gas efficiency, heat and mass balances and hydrogen analysis, with advanced process control and mathematical modeling, has reduced coke consumption by up to 100 kg per tonne and increased iron production. Upgrading to Prima PRO MS can therefore result in complete installation payback within a few weeks.&nbsp;</p><ul><li>Reduces coke consumption&nbsp;</li><li>Produces consistent quality iron&nbsp;</li><li>Reduces downstream processing costs&nbsp;</li><li>Detects water leaks fast&nbsp;</li><li>Improves thermal control of furnace&nbsp;</li><li>Enables safer operation during blowdown</li></ul>

News from LabRulezGCMS Library - Week 14, 2026

<h3><strong>We're excited to announce that </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/999"><strong>Clarity Chromatography Software</strong></a><strong> version 10.1.2 is now available!</strong></h3><p><strong>This minor update expands Clarity’s portfolio with new control modules.</strong></p><h4><strong>Newly added Instrument control modules</strong></h4><ul><li>Ecom auxiliary modules</li><li>HTA ICF control modules</li><li>Spark pump</li></ul><h4><strong>Updated Instrument control modules</strong></h4><ul><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/168"><strong>Ecom</strong></a> HPLC</li><li><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/328"><strong>Knauer</strong></a> HPLC</li><li>Spark ICF control modules</li><li>YoungIn Chromass HPLC</li></ul><blockquote><p>For a complete list of module changes, see the <a target="_blank" rel="noopener noreferrer" href="https://www.dataapex.com/version_history?product=1"><strong>Changelog</strong></a>. For more info about exciting new features directly in Clarity, explore what was introduced in the <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/article/5622"><strong>Clarity 10.1 release highlights</strong></a>.</p><p>Clarity can control <strong>1000+ instruments</strong>; the <a target="_blank" rel="noopener noreferrer" href="https://www.dataapex.com/controls"><strong>list can be previewed here</strong></a>.</p></blockquote><h4><strong>Supported Instruments in Clarity (DataApex) — Quick Guide</strong></h4><p>Clarity Chromatography Software supports a wide range of chromatographs and peripherals via <strong>digital control (DD)</strong> and <strong>analog acquisition (A/D)</strong> using the <strong>Colibrick</strong> module.</p><h5><strong>Gas Chromatographs (GC)</strong></h5><p>Digital integration over LAN/RS232 (many via ICF):</p><ul><li><strong>Agilent</strong>: 5890, 6890, 7890, 8860, 8890, <strong>Intuvo 9000</strong></li><li><strong>Shimadzu</strong>: GC-2010/2014, <strong>Nexis GC-2030</strong></li><li><strong>Thermo Fisher</strong>: TRACE 1300/1310</li><li><strong>PerkinElmer</strong>: Clarus 400–690</li><li>Also supported: <strong>Dani</strong>, <strong>Ellutia</strong>, <strong>Young In Chromass</strong>, <strong>Apix</strong>, <strong>Fuli</strong>, <strong>GOW-MAC</strong> (selected models)</li></ul><blockquote><p>Note: Most Agilent 6890–8890 and Intuvo use <strong>LAN – ICF</strong>.</p></blockquote><h5><strong>HPLC Systems</strong></h5><p>Full system/module control:</p><ul><li><strong>Agilent</strong> 1100–<strong>1290 Infinity II</strong> (ICF)</li><li><strong>Shimadzu</strong> LC-10/20 and <strong>Nexera LC-40</strong></li><li><strong>PerkinElmer</strong> Flexar / NexSAR</li><li><strong>Knauer</strong> Azura / BlueShadow / Smartline</li><li><strong>Hitachi</strong> Chromaster / Primaide</li><li><strong>Young In Chromass</strong> ChroZen series</li><li><strong>Sykam</strong> S500–S600, <strong>Watrex</strong> Streamline, <strong>Hanon</strong> LC7000–7300</li></ul><h5><strong>HPLC Modules (Pumps, Detectors, Ovens, Fraction Collectors)</strong></h5><ul><li><strong>Pumps</strong>: Agilent 1100–1290 families, Knauer, Shimadzu, PerkinElmer, Sykam, SSI, Ecom</li><li><strong>Detectors</strong>: VWD/DAD(PDA)/RID/FLD/ELSD across Agilent, Shimadzu, Knauer, PerkinElmer, Young In Chromass, Ecom, etc.</li><li><strong>Column Ovens</strong>: Agilent G1316x / G7116x, Shimadzu CTO-20/30/40, Knauer CT2.1, PerkinElmer Flexar</li><li><strong>Fraction Collectors</strong>: Knauer FC 6.1, Teledyne FOXY series, Ecom ECF 2096, Waters Fraction Collector II</li></ul><h5><strong>Autosamplers</strong></h5><ul><li><strong>Agilent</strong> GC ALS (7673/7683/7693/8697), HPLC ALS modules (G1313A–G7167C)</li><li><strong>Shimadzu</strong> AOC-20 / AOC-5000+, SIL-10 / SIL-20 / <strong>SIL-40</strong> series</li><li><strong>CTC Analytics PAL</strong>, <strong>HTA</strong> autosamplers, <strong>Spark</strong> Alias/UHPLC, <strong>Knauer</strong> AS 6.1L</li><li><strong>PerkinElmer</strong> Flexar / NexSAR AS</li></ul><h5><strong>Other Devices</strong></h5><ul><li><strong>GC×GC modulators</strong> (e.g., Charles University GC×GC Modulator)</li><li><strong>Valves &amp; switch modules</strong> (Agilent, Knauer, Shimadzu, VICI-Valco)</li><li><strong>Degassers, flow monitors, managers, interfaces</strong></li><li><strong>LC-MS / GC-MS</strong>: Advion Expression CMS, Microsaic 4500 MiD, Markes BenchTOF (and others)</li><li><strong>Balances (EA extension)</strong>: Mettler Toledo, Sartorius</li></ul><h5><strong>Analog Acquisition (Colibrick)</strong></h5><p>A/D support for legacy or analog-output devices:</p><ul><li><strong>GC</strong>: Agilent 5880/4890A, Varian 3xxx/3800/3900, PerkinElmer Clarus series, Thermo TRACE, Shimadzu GC-14/9A, Scion 43x/45x/83xx/85xx, etc.</li><li><strong>HPLC Detectors</strong>: Waters 2487/2489, ESA Corona, Hitachi L-series, JASCO FP/UV, Ecom LCD series, many others</li><li><strong>Elemental &amp; Amino Acid Analyzers</strong>: Carlo Erba/Costech ECS, Biochrom 20/30+</li></ul><p>If you are interested in a <strong>DEMO VERSION</strong>, contact us!</p>

DataApex Clarity Chromatography software 10.1.2 just released!

Article

Product

Application

Academy

Presentation

Software

Video

Since 1991 DataApex develops and manufactures chromatography data stations. DataApex is constantly striving to provide users with efficient and up-to-date tools for chromatography data processing.

DataApex

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

Mestrelab Mnova MSChrom software

Mnova MSChrom (Formerly MS) provides a common interface for different vendor data and automates all functionality such as data importing and display, integration, background subtraction, display of extracted mass chromatograms, molecule match, enumeration of molecular formulae, etc.

<h3><strong>Process, analyze and report your LC-MS and GC-MS data from your different instruments</strong></h3>
<p>Mnova MSChrom (Formerly MS) provides a common interface for different vendor data and automates all functionality such as data importing and display, integration, background subtraction, display of extracted mass chromatograms, molecule match, enumeration of molecular formulae, etc.</p>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_Effortlessly_analyze_and_report_LCMS_and_GCMS_data_from_a_wide_range_of_instruments_b7f5482cde.jpg" alt="Mestrelab Research: Mnova MSChrom - Effortlessly analyze and report LCMS and GCMS data from a wide range of instruments."/></p>
<blockquote>
<h4><a href="http://www2.mestrelab.com/l/271522/2024-03-25/3nwslf"><strong>Visit MestreLab Research MSChrom product page to learn more!</strong></a></h4>
</blockquote>
<h3><strong>MSChrom Highlights</strong></h3>
<ul>
<li><strong>Common interface</strong> to visualize your data from different vendors.</li>
<li><strong>Automate all functionality</strong> such as data importing and display, integration, background subtraction, display of extracted mass chromatograms, molecule match, enumeration of molecular formula, etc.</li>
<li><strong>Verify proposed structures</strong> by automatically matching molecular ion and isotope peaks, and potentially the MS/MS fragmentation peaks.</li>
<li><strong>Predict the isotope clusters</strong> of a molecular formula with various adducts/losses and compare with observed mass spectrum.</li>
<li><strong>Process and report</strong> MS data on your computer, improves the efficiency and save time for more complex problems.</li>
<li><strong>Improve your efficiency</strong> by automating and customizing the analysis and reporting in batch mode or in real-time using Mnova scripts.</li>
<li>Make your <strong>analytical results searchable</strong> using Mnova DB!</li>
<li><strong>Calculate MS peak purity.</strong> The Mnova MS peak purity shows the curves associated to the most abundant mass peaks under the selected chromatogram peak.</li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_Opens_the_power_of_the_technique_to_all_non_expert_users_9ccef334fa.jpg" alt="Mestrelab Research: Mnova MSChrom - Opens the power of the technique to all non-expert users."/></p>
<h3><strong>Mnova MSChrom Features</strong></h3>
<h4><strong>Background Subtraction</strong></h4>
<ul>
<li>This new feature is designed to facilitate background subtraction in your datasets, offering the capability to apply mass spectra and UV subtraction to lower impurities and noisy common peaks obtained from your analytical system, etc. to achieve more precise data analysis.</li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_Sample_2_and_blank_1_used_to_apply_MS_Background_Subtraction_and_the_result_3_6a554048a8.jpg" alt="Mestrelab Research: Mnova MSChrom - Sample, 2, and blank, 1, used to apply MS Background Subtraction and the result, 3."/></p>
<h4><strong>New Enhanced Peak Picking Algorithm and Blind Regions</strong></h4>
<ul>
<li><p>Now, MSChrom includes a new <strong>Enhanced Peak Picking Algorithm</strong> providing an alternative to the Classic algorithm used in previous versions of MSChrom. Within <strong>Enhanced</strong> peak picking algorithm new settings are available to reproduce your best results in terms of detection and integration, including Baseline Correction, smoothing features, and a new functionality based on Saturated levels, where users can set an abundance threshold to identify those overloaded peaks due to detector saturation, and perform corrections on them.</p>
</li>
<li><p>Introducing the new <strong>Blind Regions</strong> tool-a highly beneficial addition. This tool enables the selective exclusion of those undesired regions from chromatograms during analytical processes as peak picking or any general data treatment. Blind Regions will remain ignored saving time, resources, providing better reproducible results. It proves especially helpful in cases where challenges arise in specific regions (solvent front in LC, column bleeding in GC, etc.) or, for instance, when opting to discard the limits of the chromatogram.</p>
</li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_Chromatographic_Peak_Detection_Settings_panel_and_Blind_Regions_table_displayed_after_peak_picking_9f4b2b6def.jpg" alt="Mestrelab Research: Mnova MSChrom - Chromatographic Peak Detection Settings panel and Blind Regions table displayed after peak picking process and applying two blind regions on the chromatogram."/></p>
<h4><strong>Combine NMR and LC-MS or GC-MS Data in the Same Document</strong></h4>
<ul>
<li>Automatically open analytical data from instruments like Agilent, Bruker, JEOL, Thermo, and Waters, along with data in mzData or mzXML formats (<a href="http://www2.mestrelab.com/l/271522/2024-04-10/3p2gs6"><strong>refer to supported formats here</strong></a>).</li>
<li>Integrate peaks in TIC, MS, and UV/ELSD traces, either automatically or manually.</li>
<li>Choose mass spectra based on TIC peaks, with or without background subtraction, and display them in either centroid or profile mode.</li>
<li>Manually co-add mass spectra, and seamlessly analyze and report NMR and MS data together in the same document</li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_Combine_NMR_and_LC_MS_or_GC_MS_Data_in_the_Same_Document_a575d33699.jpg" alt="Mestrelab Research: Mnova MSChrom - Combine NMR and LC-MS or GC-MS Data in the Same Document."/></p>
<h4><strong>Effortlessly Generate EMC/EIC, UV Traces, and UV Spectra</strong></h4>
<ul>
<li>Create Extracted Mass/Ion Chromatograms (EMC/EIC) within a specified mass range or at a particular m/z value.</li>
<li>Generate UV Traces effortlessly by selecting a wavelength from a DAD trace.</li>
<li>Easily extract UV spectra at chosen retention times from a PDA total absorbance chromatogram.</li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_Effortlessly_Generate_EMC_EIC_UV_Traces_and_UV_Spectra_e80492edfa.jpg" alt="Mestrelab Research: Mnova MSChrom - Effortlessly Generate EMC/EIC, UV Traces, and UV Spectra."/></p>
<h4><strong>Automatic Molecule Matching for Structure Confirmation</strong></h4>
<ul>
<li>Beyond its extensive NMR structure confirmation tools within the NMR plugin, Mnova MSChrom introduces the molecular match feature, an invaluable resource for verifying structures through LC/GC/MS analysis.</li>
<li>This functionality is exceptionally swift and user-friendly, ensuring accessibility for all users, including those new to the field.</li>
<li>Import chemical structures and let the software automatically confirm matches with your experimental data. Customize match criteria by selecting adducts, losses, mass accuracy, score thresholds, etc.</li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_Automatic_Molecule_Matching_for_Structure_Confirmation_04d66572d1.jpg" alt="Mestrelab Research: Mnova MSChrom - Automatic Molecule Matching for Structure Confirmation."/></p>
<h4><strong>Isotope Cluster Prediction for Elemental Composition Verification</strong></h4>
<ul>
<li>The feature enables users to propose one or multiple molecular formulas and anticipate their mass peaks using a predefined list of adducts or losses.</li>
<li>Mnova MSChrom generates a list of molecular ion and isotopic peaks, automatically aligning them with experimental peaks, if present.</li>
<li>Customize the display by choosing the desired prediction, along with the corresponding adduct or loss, for comparison on the spectrum.</li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_Isotope_Cluster_Prediction_for_Elemental_Composition_Verification_7f75f9d6c3.jpg" alt="Mestrelab Research: Mnova MSChrom - Isotope Cluster Prediction for Elemental Composition Verification."/></p>
<h3><strong>Mnova MSChrom Market and Users</strong></h3>
<ul>
<li>Teaching MS and Chromatography to chemistry departments</li>
<li>Research in organic, medicinal and environmental chemistry</li>
<li>Quality control in chemical and pharmaceutical companies</li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_users_507a260da1.jpg" alt="Mestrelab Research: Mnova MSChrom users."/></p>
<h3><strong>Frequently Asked Questions</strong></h3>
<h5><strong>How can I know if my data is compatible with Mnova?</strong></h5>
<p><em>Mnova MS supports most of the different MSChrom data formats. You can check it on the MSChrom supported format table <a href="http://www2.mestrelab.com/l/271522/2024-04-10/3p2gs6"><strong>here</strong></a>. Please let us know if your MSChrom data format is not in the list.</em></p>
<h5><strong>How much does the MSChrom module cost?</strong></h5>
<p><em>You can find the cost of this module in our online store. You can also check out for any combo option if you have or you need Mnova NMR. For any questions about pricing you can always contact us directly at <strong>sales@mestrelab.com</strong></em></p>
<h5><strong>I have Mnova NMR and I am wondering if I could add my MS data to my NMR reports.</strong></h5>
<p><em>Yes. You can open NMR and MS data in the same document, and cut/paste the MSChrom display to the same page of NMR data if needed. Or you can create a display template to automatically format the reports.</em></p>
<h5><strong>Can I use my MSChrom data for verification purposes?</strong></h5>
<p><em>Yes. Run Molecule Match in Mnova MSChrom to verify the elemental composition automatically, or run Mnova Verify to verify a proposed structure against your MS data (Mnova Verify needs a separate license).</em></p>
<h5><strong>Can I use it to process my High Resolution MSChrom data?</strong></h5>
<p><em>Yes. Both high resolution and low resolution MS data can be used by Mnova MSChrom. Just make sure you set the proper mass tolerance parameters when you do Molecular Match.</em></p>
<h5><strong>Can I try Mnova MSChrom?</strong></h5>
<p><em>Yes, you can download a 45-day trial license of any of our products. The Mnova MSChrom module is included within the main Mnova installer. Download Mnova and try it now!</em></p>
<h3><strong>Case Studies</strong></h3>
<h4><strong>Automated analysis and reporting LC/MS and NMR together for compound registration – A case study</strong></h4>
<p>A pharma company does quality control of their compounds using both NMR and LC/MS before registration, and generates the analysis reports in their own format. Based on their requirement, we developed a Mnova script (R_NMR_MS.qs) that does all of this automatically.</p>
<blockquote>
<p><a href="http://www2.mestrelab.com/l/271522/2024-04-10/3p2gs9"><strong>read more</strong></a></p>
</blockquote>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mnova_MS_Chrom_Automated_analysis_and_reporting_LC_MS_and_NMR_together_for_compound_registration_A_case_study_8003aab1ff.jpg" alt="Mestrelab Research: Mnova MSChrom - Automated analysis and reporting LC-MS and NMR together for compound registration – A case study."/></p>


Mestrelab Mnova Gears – Chrom Best Method software

Chrom Best Method is a vendor agnostic tool that can seamlessly screen and compare several chromatographic methods, then suggest the one that is more likely to yield a pure compound.

<h3><strong>Automated solution for selection of the optimal separation method</strong></h3>
<p>Data processing and comparison between different chromatographic methods can quickly form a bottleneck when large amounts of data is generated, particularly when multiple different instruments are involved.</p>
<p><strong>Chrom Best Method</strong> is a vendor-agnostic tool that can seamlessly <strong>screen and compare several chromatographic methods</strong>, then suggest the one that is more likely to yield a pure compound. Chrom Best Method <strong>automates LC-MS data processing</strong>, <strong>target and impurity identification</strong>, <strong>method scoring</strong>, and <strong>report generation</strong>, to provide quick, smart, and robust answers, whilst still allowing for full review and overriding of results to accommodate users’ needs.</p>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mestrelab_Mnova_Gears_Chrom_Best_Method_software_Find_the_best_separation_conditions_for_your_compounds_with_Chrom_Best_Method_7d0d3f9805.jpg" alt="Mestrelab Research: Save time and money – find the best separation conditions for your compounds with Chrom Best Method!"/></p>
<blockquote>
<h3><a href="http://www2.mestrelab.com/l/271522/2024-03-25/3nwskj"><strong>Visit MestreLab Research Mnova Gears – Chrom Best Method product page to learn more!</strong></a></h3>
</blockquote>
<h3><strong>Chrom Best Method Benefits</strong></h3>
<ul>
<li>Effective, <strong>vendor-neutral analysis and comparison of your LC-MS data from different instruments</strong> in one software package.</li>
<li>Seamless <strong>evaluation of several methods</strong> for many targets in a single run, which accommodates <strong>HT experimentation</strong>.</li>
<li>Meaningful <strong>method scores</strong> based on your criteria, preferences, and operational requirements.</li>
<li>Substantial <strong>reduction in the time spent</strong> on manual analysis and creation of reports.</li>
<li>Effective <strong>result visualization and interpretation</strong>, enabling quick and confident decision making.</li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mestrelab_Mnova_Gears_Chrom_Best_Method_software_2_8cff8a724b.jpg" alt="Mestrelab Research: Mestrelab Mnova Gears – Chrom Best Method software"/></p>
<h3><strong>Chrom Best Method Features</strong></h3>
<ul>
<li><strong>Automated data preparation, analysis, and reporting of results</strong></li>
<li>Comprehensive <strong>method scoring</strong> that generates meaningful results</li>
<li>Powerful target <strong>peak assignment options</strong> and <strong>detection of impurities</strong></li>
<li><strong>Multiple ways to provide target information</strong> (using a structure, dataset file name, mapping file, or parameters)</li>
<li><strong>Flexible ion matching and analysis options</strong> that fit multiple-use cases</li>
<li>Optimized <strong>algorithm for chiral screening</strong></li>
<li>Possibility to <strong>screen methods on different targets in a single run</strong></li>
<li><strong>Manual review</strong> by exception of scoring and <strong>ability to override results</strong></li>
</ul>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mestrelab_Mnova_Gears_Chrom_Best_Method_software_ccc0c0e0ad.jpg" alt="Mestrelab Research: Mestrelab Mnova Gears – Chrom Best Method software."/></p>
<h3><strong>Purification Workflow</strong></h3>
<h4><strong>More Automation</strong></h4>
<p>Looking for an enterprise-level solution for improving your purification and data management procedures? Check the <a href="http://www2.mestrelab.com/l/271522/2024-03-25/3nwskm"><strong>Fraction Analysis</strong></a> and <a href="http://www2.mestrelab.com/l/271522/2024-03-25/3nwskq"><strong>Quality Control</strong></a> bricks that also run in full automation with Mgears. You have the complete flexibility to combine and adapt these solutions to your standard procedures to reap even more benefits to your organization.</p>
<p><a href="http://www2.mestrelab.com/l/271522/2024-04-10/3p2gsh"><strong>Contact us</strong></a> for more information.</p>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Mestrelab_Research_Mestrelab_Mnova_Gears_Chrom_Best_Method_software_4_f25f63daa7.jpg" alt="Mestrelab Research: Mestrelab Mnova Gears – Chrom Best Method software"/></p>
<h3><strong>Markets</strong></h3>
<p>Academic, Government &amp; Industrial</p>
<h4><strong>Who should be using Chrom Best Method?</strong></h4>
<p>Organic chemists, analysts, QC experts, and researchers using quantitative chromatographic methods for quality control, concentration/purity determination, or monitoring/optimization of reactions in one of the following markets and applications:</p>
<ul>
<li><p>Pharmaceutical / Drug development industry</p>
</li>
<li><p>Food &amp; Beverage industries</p>
</li>
<li><p>Personal care and Cosmetics</p>
</li>
<li><p>Fine chemical synthesis industries</p>
</li>
<li><p>Polymer industries</p>
</li>
<li><p>Academic research laboratories</p>
</li>
<li><p>Contract Research Organizations (CROs) offering purification services</p>
</li>
<li><p>Compound purification for subsequent use in studies or commercialization</p>
</li>
<li><p>Isolation of unknown impurities in finished products, natural products, or in the environment for structural disclosure, study, etc.</p>
</li>
<li><p>Chiral separation to remove unwanted enantiomers obtained during organic synthesis</p>
</li>
</ul>


Products focused on GC/MSD from SciY/Mestrelab Research distributed by SciY/Mestrelab Research - page 1

Related content

DataApex Clarity Chromatography software 10.1.2 just released!

Trimming a GC Column: Purpose, Symptoms, and Proper Technique

News from LabRulezGCMS Library - Week 14, 2026