Analytical Challenges and Strategies for Compound Identification Using Gas Chromatography–Ion Mobility Spectrometry

<p><strong>Measurement results are only fit for purpose if the measurement uncertainty (MU) is reliable and has a magnitude small enough for the intended use. The target MU is the maximum admissible uncertainty defined for a specific measurement goal.&nbsp;</strong></p><p>In compliance assessment, the MU should be small enough to enable identification of deviations from compliance relevant to the interests to be protected (such as public health or industrial productivity). Too large an uncertainty would not provide the required protection, while an uncertainty that is too small could mean the use of unnecessary expensive measurements.&nbsp;</p><p>The Eurachem/CITAC guide on ‘<i><strong>Setting and Using Target Uncertainty in Chemical Measurement</strong></i>’ suggests how to set upper boundaries for the uncertainty based on the intended use of the result [1].&nbsp;</p><p><strong>The impact of the MU on decisions is illustrated in a fictional scenario.&nbsp;</strong></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Setting_Target_Measurement_Uncertainty_2_daf2cb4ec8.jpg" alt="Eurachem: Setting Target Measurement Uncertainty" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Setting_Target_Measurement_Uncertainty_2_daf2cb4ec8.jpg 150w," sizes="100vw" width="740" height="770"></p><p>Mr. Reis is a farmer planning to sell oranges to a juice producer. The juice producer checks oranges for thiabendazole pesticide residues and Brix level (degrees Brix provides a measure of orange juice sweetness). The producer only accepts oranges with thiabendazole residues below 1 mg kg<sup>-1</sup> and a Brix level above 55 °Bx, paying more if the Brix level is above 65 °Bx.&nbsp;</p><p>Mr. Reis contracted Laboratory C to analyse his oranges before shipping them to the producer knowing that the customer also checks the oranges in its laboratory. Mr. Reis was very happy with the results provided by Laboratory C although the pesticide residue analyses were expensive.&nbsp;</p><p>The producer accepted the oranges but decided to pay less than expected.&nbsp;</p><p>After asking the juice producer, the detailed results of both laboratories were compared. This showed that although the results were metrologically compatible they supported different decisions on the oranges’ price.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Setting_Target_Measurement_Uncertainty_3_aa7c28e61a.jpg" alt="Eurachem: Setting Target Measurement Uncertainty - Laboratory C" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Setting_Target_Measurement_Uncertainty_3_aa7c28e61a.jpg 245w," sizes="100vw" width="927" height="192"></p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Setting_Target_Measurement_Uncertainty_4_4588f40881.jpg" alt="Eurachem: Setting Target Measurement Uncertainty - Juice producers Laboratory" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Setting_Target_Measurement_Uncertainty_4_4588f40881.jpg 245w," sizes="100vw" width="911" height="195"></p><p>The measurement of thiabendazole residues performed by Laboratory C is associated with an extremely low uncertainty making measurements more expensive than necessary. However, the uncertainty associated with the determination of the Brix level is too large, making compliance decisions too uncertain.</p><p>Measurement results are only fit for the intended use if the measurement uncertainty (MU) is smaller than a maximum acceptable value (i.e. the target MU).&nbsp;</p><p>Even if the customer or the regulator does not define the target MU, the laboratory should define it to decide if the measurement is fit for the intended use. The Eurachem/CITAC guide [1] suggests the use of different indicators of the measurement quality requirement to define the target MU. Information used to define the target MU is presented from the most likely to become harmonised to the ones supported with less adequate data. The following figure presents this hierarchy of adequacy with numbers from #1 to #9.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Setting_Target_Measurement_Uncertainty_01cd73bb2c.jpg" alt="Eurachem: Setting Target Measurement Uncertainty" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Setting_Target_Measurement_Uncertainty_01cd73bb2c.jpg 245w," sizes="100vw" width="1600" height="900"></p><blockquote><p>Approaches to defining the target MU described in the Eurachem/CITAC Guide, where u<sup>tg</sup> and U<sup>tg</sup> represent the target standard and expanded uncertainties, respectively. (the numbers in the bottom of the circles identify the sections of the Guide)</p></blockquote>

Setting Target Measurement Uncertainty

<h3><a target="_blank" rel="noopener noreferrer" href="https://www.isc2026.org/"><strong>ISC 2026</strong></a></h3><p><strong>The </strong><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/companies/314"><strong>International Symposium on Chromatography (ISC)</strong></a><strong> represents the oldest conference series on separation science. ISC symposia have been organised since 1956 in each even year. ISC is one of the premier meetings series for discussion of all modes of chromatography and separation science with a broad coverage of techniques and applications.</strong></p><h4><strong>35th International Symposium on Chromatography</strong></h4><p>📆<strong>6. - 10. September 2026</strong></p><p>📍<strong>Prague, Czech Republic</strong></p><h3><strong>REGISTRATION</strong></h3><blockquote><p class="cke-user_style-important"><strong>👉</strong><a target="_blank" rel="noopener noreferrer" href="https://www.czech-in.org/cmPortalV15/Account/Login?ReturnUrl=%2FcmPortalV15%2FPortal%2FISC26%2Fnormal"><strong>Register HERE for the ISC 2026</strong></a></p><p><strong>Late Registration until 25 August 2026</strong></p></blockquote><h3><strong>VENDOR SEMINARS</strong></h3><p>Discover the vendor seminars taking place during ISC 2026 in Prague, where leading analytical technology companies will present the latest developments in chromatography, mass spectrometry, and biopharmaceutical analysis. The programme covers stationary phase selectivity, UHPLC and ion chromatography innovations, superficially porous particle columns, virtual GC-MS method modelling, and advanced LC-MS workflows for emerging therapeutics.</p><h4><strong>Lunch seminar Avantor</strong></h4><h5><strong>Stationary Phase Selectivity: A Powerful Tool for Challenging Separations</strong></h5><ul><li>Monday, 7 September 2026&nbsp;</li><li>13:00-14:00</li><li><strong>👉</strong><a target="_blank" rel="noopener noreferrer" href="https://form.jotform.com/262112522534345"><strong>REGISTER HERE</strong></a></li></ul><p>Stationary phase chemistry is one of the most influential variables in chromatographic method development, providing a powerful means of controlling selectivity and achieving successful separations. While the wide range of commercially available stationary phase chemistries provides extensive opportunities to optimise selectivity, navigating these choices can be challenging, often leading to suboptimal column selection and missed opportunities to improve separation performance or speed of analysis.</p><p>This seminar will explore why stationary phase selectivity is one of the most powerful tools available to chromatographers for method development. Approaches for characterizing selectivity, including the Tanaka and Neue methodologies, will be discussed as practical tools for understanding and differentiating column chemistries. These concepts will then be used to demonstrate how stationary phase design can be rationalized and how a deeper understanding of selectivity can guide more effective column selection.</p><p>Application examples will highlight the impact of stationary phase chemistry across a range of analytes, including small molecules and peptides. The seminar will also examine how rational stationary phase selection can be incorporated into streamlined workflows for reversed-phase LC, HILIC and SFC method development.</p><p>Attendees will gain a deeper understanding of how strategic column selection can enhance resolution, reduce method development time, and enhance overall method performance. The concepts presented will provide a practical framework for scientists seeking a more structured, efficient, and knowledge-driven approach to method development.</p><blockquote><p><strong>Dr Matt James</strong></p><p>Matt James is a Senior Research Scientist at Avantor Sciences. Matt gained his PhD at University of Bristol and over the last 15 years, he has worked within the Technical Support, Applications and R&amp;D teams within Hichrom, now part of Avantor. Recent focuses have been HPLC/UHPLC method transfer and translation, the use of solid core phases, development of next generation LC stationary phases and the development of LC methods for key applications, such as the analysis of nitrosamines and PFAS by LC-MS/MS.</p></blockquote><h4><strong>Lunch seminar Shimadzu</strong></h4><h5><strong>Three New Reasons to Rethink Your Workflow</strong></h5><ul><li><strong>Dr. Gesa Schad</strong>, Shimadzu Europa GmbH</li><li><strong>Dr. Waldemar Weber</strong>, Shimadzu Europa GmbH</li><li>Monday, 7 September 2026&nbsp;</li><li>13:00-14:00</li><li><strong>👉</strong><a target="_blank" rel="noopener noreferrer" href="https://www.shimadzu.eu/forms/vendor-seminar-registartion_isc2026.html"><strong>REGISTER HERE</strong></a></li></ul><p>Join us for an engaging seminar introducing three new analytical solutions designed to help laboratories work smarter, respond faster, improve robustness, and achieve greater confidence in their results. As analytical demands continue to grow, laboratories need technologies that not only deliver strong performance, but also enhance efficiency, flexibility, and ease of operation. This seminar will highlight how the latest innovations can streamline workflows, support complex applications, and create new opportunities for productivity across the laboratory.</p><h5><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=nexera+IC"><strong>Nexera IC</strong></a><strong> – new compact ion chromatograph&nbsp;</strong></h5><ul><li>This new ion chromatography solution is designed to deliver reliable, high-sensitivity analysis for a anions and cations. With a focus on stability, ease of operation, and workflow efficiency, it helps laboratories achieve consistent results while supporting applications in environmental, food, chemical, and pharmaceutical testing.</li></ul><h5><a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library?mainauthorItems=1&amp;search=x4"><strong>Nexera X4</strong></a><strong> – No more compromise in UHPLC analysis</strong></h5><ul><li>This next-generation UHPLC platform is designed for laboratories that demand both ultra-high performance and robust operation, without compromise. Combining improved usability with dependable, consistent results, it helps optimize throughput, improve data quality, and simplify daily workflows across both routine and advanced analyses.</li></ul><h5><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-TQ+RX"><strong>GCMS-TQ RX Series</strong></a><strong> – Enhanced Sensitivity and Reliability in GC-MS/MS Analysis&nbsp;</strong></h5><ul><li>Our new advanced triple quadrupole GC-MS/MS systems are engineered to provide highly sensitive, selective, and dependable analysis for complex samples. Designed to support challenging applications such as trace-level detection and regulatory testing, they enable laboratories to strengthen analytical confidence, improve reproducibility, and manage demanding workflows more effectively.</li></ul><p>Join us to explore the latest innovations and gain valuable insights into our technologies. Register today to secure your place.</p><h4><strong>Lunch seminar Advanced Materials Technology</strong></h4><h5><strong>Advantages of Superficially Porous Particle Columns for HPLC and LC-MS</strong></h5><ul><li><strong>Stephanie Schuster, Joshua McBee, Conner McHale, Peter Pellegrinelli</strong> (Advanced Materials Technology, 3521 Silverside Rd., Wilmington, DE 19810)</li><li>Tuesday, 8 September 2026&nbsp;</li><li>13:00-14:00</li><li><strong>👉</strong><a target="_blank" rel="noopener noreferrer" href="https://halocolumns.com/isc-2026-vendor-lunch-seminar/"><strong>REGISTER HERE</strong></a></li></ul><p><br>Superficially porous particle (SPP) columns have existed in one form or another since the late 1960s. However, the benefits of the particle with the solid silica core surrounded by the porous silica shell were not realized for small molecules until 2006 when the first sub-3-µm superficially porous particle columns were introduced. This particle technology enabled efficiencies similar to sub-2-µm fully porous particles (FPPs) without the need for ultra-high pressure capable instrumentation. As a result of the high efficiencies and lower back pressure, the columns may be run at faster flow rates to enable high throughput separations. Additionally, the SPP columns are rugged and offer long column lifetimes. This presentation will highlight comparisons between SPP columns and FPP columns for separations of pharmaceuticals, pesticides, and oligonucleotides.</p><h4><strong>Lunch seminar Restek</strong></h4><h5><strong>Virtual Chromatographic Modelling Software For Optimising Separation Of Isobaric Compounds in GC-MS Methods</strong></h5><ul><li><strong>Sebastian Prisacariu, Anna Pulte</strong></li><li>Tuesday, 8 September 2026&nbsp;</li><li>13:00-14:00</li><li><strong>👉</strong><a target="_blank" rel="noopener noreferrer" href="https://form.jotform.com/262112099571355"><strong>REGISTER HERE</strong></a></li></ul><p>There is a constant balance for high-throughput laboratories between method run times for large panel analyses and resolution of analytes across these panels to allow sufficient data quality. Developing such methods is often time consuming and expensive for laboratories, as dedicated resources are required to test methods iteratively. Chromatographic modelling tools are becoming increasingly popular for method setup and refinement in high-throughput laboratories looking to minimise instrument and analyst downtime. These tools traditionally offer column phase and method condition suggestions based on the separation of a list of analytes, which can then be modified to improve specific separations as necessary.</p><p>When developing gas chromatography (GC) methods, shortening cycle time often comes at the cost of compounds co-eluting, with the expectation that a mass selective detector, such as a mass spectrometer (MS) will allow resolution through ion-selective quantitation. An issue arises when the method attempts to analyse isobaric compounds, which cannot be distinguished by MS, and as a result labs must rely upon physical separation via column phase chemistry.</p><p>As GC-MS techniques continue to be adopted by laboratories, there is a need for more tools that consider mass data for analytes when optimising large panel separations. The virtual chromatographic modelling tool used in this study is built with mass spectrum data for compounds included in libraries. When operating in “MS mode”, the software identifies isobaric compounds and prioritises their separation when making recommendations regarding column phase and method conditions. For those using non-mass selective detection methods, the tool is easily toggled to “FID mode” for users interested in resolving all compounds, regardless of specific mass, allowing for flexibility in instrumentation. Results help labs save time and resources in method development and refinement by considering the instrumentation involved in the model.</p><h4><strong>Lunch seminar Thermo Fisher Scientific</strong></h4><h5><strong>ASOs, ADCs, and Other Therapeutics: Advanced Characterization with Novel Reversed-Phase Columns and Integrated LC–MS Platform</strong></h5><ul><li>Tuesday, 8 September 2026&nbsp;</li><li>13:00-14:00</li><li><strong>👉</strong><a target="_blank" rel="noopener noreferrer" href="https://forms.cloud.microsoft/pages/responsepage.aspx?id=LXJ9toqqd0ehaevremo7Zz9X1b58h7ZKmlE1n_EPKh5URFJOMFFMVlZWOEc2NUQzWUlTTVY2UEhSTy4u&amp;route=shorturl"><strong>REGISTER HERE</strong></a></li></ul><p>Biotherapeutics are becoming increasingly structurally diverse, placing greater demands on analytical platforms that can support efficient development and regulatory readiness. Reversed-phase chromatography (RPC) remains a widely adopted and adaptable technique, supporting applications that range from oligonucleotide analysis to detailed protein characterization and post-translational modification assessment.</p><p>This seminar explores the integration of a macroporous, monodisperse reversed-phase column with a next-generation bioinert LC system for the analysis of two emerging classes of biotherapeutics. Antisense oligonucleotides were examined under optimized chromatographic conditions, using a design-of-experiments strategy to evaluate how ion-pairing reagents influence both LC separation and downstream MS performance. The platform was further applied to antibody–drug conjugates, combining RPC with Orbitrap mass spectrometry to support multi-level characterization. Intact, sub-unit, and bottom-up analyses enabled drug-to-antibody ratio determination alongside detailed PTM profiling — including glycosylation, oxidation, and deamidation — under native and stress conditions. Collectively, these studies demonstrate a streamlined and adaptable workflow for comprehensive biotherapeutic characterization.</p><blockquote><p><strong>Sara Carillo, Ph.D. &nbsp;</strong>(Bioanalytical Research Lead, Characterization and Comparability Laboratory National Institute for Bioprocessing Research and Training (NIBRT), Dublin, Ireland)</p><p>Sara Carillo completed her Ph.D. in chemical sciences in 2013 at the University of Naples Federico II, where she focused on the structural characterization of polysaccharides and glycoconjugates from Gram-negative bacteria using NMR and mass spectrometry techniques. In 2015, she joined the CCL group at NIBRT, led by Prof. Jonathan Bones. She began her postdoctoral research investigating the effects of extractables and leachables from single-use bioreactors on both the CHO cell N-glycome and the monoclonal antibodies they produce. She currently serves as Bioanalytical Research Lead at NIBRT, where her work centers on developing new mass spectrometry–based analytical approaches to enable deeper and more accessible understanding of biomanufacturing processes and the structural complexity of biopharmaceuticals.</p><p><strong>Sukhdev Bangar</strong> (Senior Product Marketing Manager, Thermo Fisher Scientific, Hemel Hempstead, UK)</p><p>Sukhdev graduated from De Montfort University (UK) with a BSc. in Pharmaceutical Sciences. After which he worked in the Pharmaceutical industry at GSK &amp; Astra Zeneca performing LC &amp; LC-MS analyses. From 2005 till 2023 Sukhdev worked various roles at Waters Corporation; LC-MS applications, Pharma LC-MS Demo group leader and HPLC Product manager. In his current role at Thermo Fisher Scientific he is responsible for marketing activities for the Vanquish analytical LC’s product portfolio. In this role, he represents the voice of the customer helping shape the future of Vanquish LC systems.&nbsp;</p></blockquote>

Vendor Seminars at ISC 2026

Article

Events

Academy

Scientific article

Science and research

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

The International Symposium on Chromatography (ISC) represents the oldest conference series focussing on separation science. ISC symposia have been organised since 1956 in each even year. ISC is internationally recognised as one of the premier meeting series for discussion of all modes of chromatography and separation science with a broad coverage of techniques and applications.

International Symposium on Chromatography - (ISC)

Thermo Scientific TRACE 1310 GC Analyzers for Aromatics in Fuels

TRACE 1310 GC analyzers for BTEX in fuels enable fast, standard-compliant analysis of aromatics and oxygenates in gasoline. Preconfigured, tested, and automation-ready.

<div><p><strong>Easily analyze single or multiple spark ignition fuel samples using the Thermo Scientific™ TRACE™ 1310 GC Analyzers for aromatics (BTEX) in fuels. These automated gas chromatography systems measure and report aromatics, benzene, toluene, etc. in spark ignition fuels, such as gasoline.</strong></p><p>They are preconfigured, method tested, and ready to analyze samples after installation, using the<strong> </strong><a target="_blank" rel="noopener noreferrer" href="https://gcms.cz/products/76"><strong>Thermo Scientific™ Chromeleon™ Chromatography Data System (CDS)</strong></a> to acquire and analyze data. Each system is delivered with methods pre-installed and a complete documentation package.</p><div><p><strong>Three TRACE 1310 gas chromatography systems are available</strong>. Each is configured for analyzing gasoline (spark ignition fuels) according to ASTM standard test methods.</p><h4><strong>⚙️ TRACE 1310 GC for benzene and toluene by ASTM D3606</strong></h4><p>A thermal conductivity detector (TCD) detects and quantitates aromatics in spark ignition fuels such as gasoline and aviation fuels specified in ASTM D3606. The stripper column holds hydrocarbons up for backflush to prevent contamination of aromatics column.</p><h4><strong>⚙️ TRACE 1310 GC for aromatics by ASTM D5580</strong></h4><p>An FID channel detects and quantitates finished gasoline as specified in ASTM D7754. The stripper column holds non-aromatic hydrocarbons, which are backflushed to vent to prevent background contamination.</p><h4><strong>⚙️ TRACE 1310 GC for gasoline by ASTM D4815, 3606, and 5580</strong></h4><p>A combination analyzer for gasoline, it analyzes for oxygenates or aromatics. An FID channel detects and quantitates oxygenate compounds in spark ignition fuels (gasoline) as specified in the ASTM method D4815. Includes TCD channel to detect aromatic hydrocarbons by ASTM 3606. The stripper column holds hydrocarbons, which are vented by a pressure point tee to prevent contamination of oxygenates column.</p><h3><strong>🔧&nbsp;Built to maximize productivity and uptime</strong></h3><ul><li>Systems features Instant Connect detector modules increasing uptime with detector exchange in minutes</li><li>Heated sample bulkheads ensure complete sample transfer</li><li>Automated injection for liquid samples</li><li>Optimized system footprint to reduce benchspace requirement</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/application::product.product/Thermo-TRACEtm-1310-GC-Analyzers-for-Aromatics-in-Fuels.jpg" alt="Thermo Scientific TRACE 1310 GC Analyzers for Aromatics in Fuels" width="null" height="null"></p></div></div>

Thermo Scientific TRACE 1310 GC Natural Gas (NG) and Natural Gas Liquid (NGL) Analyzers

Choose from 15+ TRACE 1310 NG/NGL analyzers for standard-compliant analysis of BTU content, speciation, and impurities. Options from single to multi-channel systems.

<div><div><p><strong>Select from over 15 turnkey Thermo Scientific™ TRACE™ 1310 Natural Gas and Natural Gas Liquid Analyzers for the vital information you need to meet increasing need for analytical data as natural gas (NG) and natural gas liquid (NGL) demand, production, custody transfer, and consumption.</strong></p><p><strong>TRACE 1310 NG/NGL systems </strong>conduct analyses according to standard methods, GPA, ASTM, ISO, DIN, including calorific or BTU content, hydrocarbon speciation and impurities. Choose from low-cost single channel, best-value dual channel, or highly flexible combination systems.</p></div><div><h3><strong>⚙️&nbsp;Choice of Turnkey NG/NGL Analyzers</strong></h3><p>Our team of specialist, with over 60 years in the business, has developed a complete line of analyzers. We offer over 15 different combinations to select from and all feature the innovative modularity of our Instant Connect injectors and detectors, providing the highest uptime and easiest maintenance.</p><h4><strong>Single channel analyzers – Lowest priced systems</strong></h4><ul><li>Analyze a single sample per analysis using a single channel analyzer for NG or NGL.</li></ul><h4><strong>Dual channel analyzers – Best value systems</strong></h4><ul><li>Run two different samples simultaneously for improved productivity, or one sample with two channels of data BTU and speciation.</li></ul><h4><strong>Combination analyzers – Most flexible system</strong></h4><ul><li>A single platform capable of performing all the standard methods on a NG or NGL sample.</li></ul><h3><strong>🔧&nbsp;Common System Features</strong></h3><ul><li><strong>Gas Chromatograph: </strong>TRACE 1310 Gas Chromatography system with 12cm color touch screen</li><li><strong>Column Oven:</strong> Forced air heating with option cryo cooling</li><li><strong>Max Temp: </strong>450°C</li><li><strong>Maximum Heating Rate: </strong>125°C/min</li><li><strong>Heated Zones:</strong> 6</li><li><strong>Detector: </strong>Thermal conductivity detector (TCD)</li><li><strong>Filaments:</strong> Dual Ni/Fe</li><li><strong>Sensitivity: </strong>Hydrocarbons 0.005%, Permannet Gases 0.01%, H2S 0.05%</li><li><strong>Linear Dynamic Range:</strong> 1 x 105</li><li><strong>Max Temperature:</strong> 400°C</li><li><strong>Dimensions (HxWxD cm):</strong> 45 x 53.5 x 67</li><li><strong>Weight (kg):</strong> 41</li><li><strong>Voltage: </strong>120V +/- 10%</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_TRACE_1310_GC_Natural_Gas_NG_and_Natural_Gas_Liquid_NGL_Analyzers_03a7b3a3f4.jpg" alt="Thermo Scientific TRACE 1310 GC Natural Gas (NG) and Natural Gas Liquid (NGL) Analyzers: Natural Gas Sample – C6+ Early Regroup with Oxygen/Nitrogen Separation." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_TRACE_1310_GC_Natural_Gas_NG_and_Natural_Gas_Liquid_NGL_Analyzers_03a7b3a3f4.jpg 245w," sizes="100vw" width="1096" height="522"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_TRACE_1310_GC_Natural_Gas_NG_and_Natural_Gas_Liquid_NGL_Analyzers_2_c65fde10cb.jpg" alt="Thermo Scientific TRACE 1310 GC Natural Gas (NG) and Natural Gas Liquid (NGL) Analyzers: Natural Gas Liquid Sample – C7+ Early Regroup." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_TRACE_1310_GC_Natural_Gas_NG_and_Natural_Gas_Liquid_NGL_Analyzers_2_c65fde10cb.jpg 245w," sizes="100vw" width="1057" height="510"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_TRACE_1310_GC_Natural_Gas_NG_and_Natural_Gas_Liquid_NGL_Analyzers_3_23aa8bf3a2.jpg" alt="Thermo Scientific TRACE 1310 GC Natural Gas (NG) and Natural Gas Liquid (NGL) Analyzers: Extended Chromatogram for GPA 2186 (inset zoom of C6+)." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_TRACE_1310_GC_Natural_Gas_NG_and_Natural_Gas_Liquid_NGL_Analyzers_3_23aa8bf3a2.jpg 203w," sizes="100vw" width="1065" height="817"></p></div></div>

Thermo Scientific TRACE 1310 GC Analyzers for Permanent Gases & Trace Impurities

Choose TRACE 1310 GC systems for industrial gas stream analysis. From labs to at-line use, they’re pre-configured, tested, and ideal for permanent gases, CO/CO₂, and impurities.

<div><p><strong>Refuse to compromise by choosing from our variety of</strong><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products?category=9&amp;instrumentationItems=1&amp;manufacturerItems=3&amp;search=TRACE%E2%84%A2+1310"><strong> Thermo Scientific™ TRACE™ 1310 gas chromatography systems</strong></a><strong> for the analysis of industrial gas streams.&nbsp;</strong></p><p>These systems can be used in laboratories and in pilot/scale-up to at-line environments. Whether you need to analyze permanent gases, hydrogen, low levels of CO/CO<sub>2</sub>, impurities in chlorine, trace-level impurities in pure gases or a combination of those analyses, there is a system to meet your requirements. TRACE 1310 analyzers for industrial gas streams come pre-configured, factory tested and ready to connect to your lab services.</p><div><h3><strong>📑 Ready to Install and Run Samples</strong></h3><ul><li>Fully configured and factory tested before delivery</li><li>Full documentation set<ul><li>start-up and troubleshooting guide</li><li>detailed flow and plumbing schematics</li><li>spare parts list</li><li>method and factory test results</li></ul></li></ul><h3><strong>⚙️ Built to maximize productivity and uptime</strong></h3><ul><li>Two-oven design: Temperature programmable GC Oven and independent isothermal valve oven can hold up to six packed columns for optimal column management</li><li>Features Instant Connect detector modules, increasing uptime with detector exchange in minutes</li><li>Optional third isothermal oven for molecular sieve columns</li><li>Spacious independent valve oven with easy access to valves, rotors, and actuators</li><li>Heated sample bulkheads ensure complete sample transfer</li><li>Optimized system footprint to reduce bench space requirement</li></ul><h4><strong>🧪 Permanent Gas - CO/CO<sub>2</sub></strong></h4><ul><li>Single channel system for N<sub>2</sub>, O<sub>2</sub>, CO, and CO<sub>2</sub></li><li>Single channel for low level CO and CO<sub>2</sub></li><li>Dual channel system for N<sub>2</sub>, O<sub>2</sub>, and low-level CO/CO<sub>2</sub></li><li>Dual Channel system for N<sub>2</sub>, O<sub>2</sub>, CO, CO<sub>2</sub> and H<sub>2</sub></li></ul><h4><strong>🧪 Trace-level impurities at ppb-ppt in pure gases</strong></h4><ul><li>Impurities in Oxygen - H<sub>2</sub>, Ar, N<sub>2</sub>, CO, CO<sub>2</sub> and C1-C4</li><li>Impurities in Helium - H<sub>2</sub>, Ar, N<sub>2</sub>, O<sub>2</sub>, CO, CO<sub>2</sub> and C1-C4</li><li>Impurities in inert, pure gases - H<sub>2</sub>, Ar, N<sub>2</sub>, O<sub>2</sub>, CO, CO<sub>2</sub> and C1-C4</li></ul><h4><strong>🧪 Impurities in Chlorine Gas</strong></h4><ul><li>Channel 1 - H<sub>2</sub></li><li>Channel 2 - Ar, N<sub>2</sub>, O<sub>2</sub>, CO, CO<sub>2</sub> and C1-C4</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/application::product.product/TRACEtm-1310-GC-Analyzers-for-Permanent-Gases-and-Trace-Impurities.jpg" alt="Thermo Scientific TRACE 1310 GC Analyzers for Permanent Gases &amp; Trace Impurities" width="null" height="null"></p></div></div>

Thermo Scientific TRACE 1310 GC Analyzers for Dissolved Gases

Automate analysis of dissolved gases in transformer oils with TRACE GC 1310. Fully compliant with ASTM D3612 A/C, pre-configured, tested, and ready for fast startup.

<p><strong>Automate the analysis of dissolved gases in transformer insulating oils using the Thermo Scientific™ TRACE™ GC for Dissoved Gases. This gas chromatography system is based on the robust and reliable Thermo Scientific™ TRACE™ 1310 series gas chromatograph.&nbsp;</strong></p><p>It includes all of the components required to measure gas samples from transformer oil and is fully compliant with ASTM D3612 Method A or C. The system is delivered pre-configured and tested to enable fast startup and commissioning. Documentation includes startup procedures, troubleshooting guide, instrument method, and recommended spare parts.</p><h3><strong>Ready to install and run samples</strong></h3><ul><li>Fully configured and factory tested</li><li>Designed to meet industry standard methods - <strong>ASTM 3612, Method A or C</strong></li><li>Includes method delivered with system</li><li>Includes commission and training upon installation</li><li><strong>Available in two configurations:&nbsp;</strong><ul><li><strong>TOGAMAC010011</strong> -Thermal Conductivity Detector (TCD) in series with methanizer Flame Ionization Detector (FID)</li><li><strong>TOGAMAC010021 </strong>- TCD in series with methanizer FID. Includes integrated bypass to allow diversion of sulfur species and sulfur hexafluoride to prevent damage to nickel catalyst.</li></ul></li><li>Enables analysis of samples from vacuum extraction via manual gas-tight syringe or automated headspace sampling systems</li><li>Features Instant Connect detector modules, which increase uptime by enabling detector exchange in minutes</li><li>Offers optional third isothermal oven for molecular sieve columns</li><li>Designed for increased uptime and ease of support</li><li>Features spacious independent valve oven with easy access to valves, rotors, and actuators</li><li>Optimized system footprint to reduce bench space requirement</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_TRACE_1310_GC_Analyzers_for_Dissolved_Gases_a826e9752a.jpg" alt="Thermo Scientific TRACE 1310 GC Analyzers for Dissolved Gases" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_TRACE_1310_GC_Analyzers_for_Dissolved_Gases_a826e9752a.jpg 245w," sizes="100vw" width="1021" height="594"></p>

Thermo Scientific TRACE 1310 GC Refinery Gas Analyzers

TRACE 1310 Refinery Gas Analyzers: pre-tested, ready-to-use systems for ASTM, UOP, GPA, ISO methods. Fast RGA performance, Instant Connect, and full documentation.

<div><div><p><strong>Experience outstanding reliability and performance in your gas chromatography analyses with Thermo Scientific™ TRACE™ 1310 Refinery Gas. Analyzers. We offer a wide selection of configurations for ASTM D1945, ASTM D7833, UOP 539, ASTM 2163, GPA 2166/2286, and ISO 6974. Pre-configured and factory tested, all configurations of TRACE 1310 Refinery Gas Analyzers are ready to analyze your samples right out of the box.</strong>&nbsp;</p><p>Experience easier maintenance and greater uptime with patented Instant Connect modularity. We offer six models to select from based upon your sample requirements and all deliver 'Fast RGA' performance. Each system includes a start-up guide with troubleshooting tips and full plumbing diagrams.</p></div><div><h3><strong>✅ Ready to Install and Run Samples</strong></h3><ul><li>Fully configured and factory tested</li><li>Designed to meet industry standard methods - ASTM UOP ISO</li><li>Method delivered with system</li><li>Commission and training on installation</li></ul><h3><strong>🔧 Variety of configurations to meet your requirements</strong></h3><h4><strong>3-Three-channel configurations</strong></h4><ul><li><strong>Ch1: </strong>PG &amp; CO<sub>2</sub>, Ch2: C1-C8, Ch3: H<sub>2</sub>/He</li><li><strong>Ch1:</strong> PG &amp; CO<sub>2</sub>, Ch2: C1-C5 C6+, Ch:3 H<sub>2</sub>/He</li><li><strong>Ch1: </strong>PG &amp; CO<sub>2</sub> H<sub>2</sub>S, Ch2: C1-C5 C6+, Ch:3 H<sub>2</sub>/He</li></ul><h4><strong>3-Four-channel configurations for expanded capability</strong></h4><ul><li><strong>Ch1: </strong>PG &amp; CO<sub>2</sub>, Ch2: C1-C5 C6+, Ch3: C1-C8, Ch4: H<sub>2</sub>/He</li><li><strong>Ch1: </strong>PG &amp; CO<sub>2</sub>, Ch2: C1-C8, Ch:3 low level CO &amp; CO<sub>2</sub>, Ch:4 H<sub>2</sub>/He</li><li><strong>Ch1:</strong> PG &amp; CO<sub>2</sub>, Ch2: C1-C8, Ch:3 H<sub>2</sub>/He, Ch4: Sulfur speciation</li></ul><h3><strong>🧪 Built for speed and flexibility</strong></h3><ul><li>All systems are <strong>'fast RGA' designs</strong> for <strong>faster sample turnaround</strong></li><li><strong>Two-oven design</strong> – Temperature programmable GC Oven and <strong>independent isothermal valve oven</strong> can hold <strong>up to 6 columns</strong> for <strong>optimal column management</strong></li><li>System features <strong>Instant Connect detector modules</strong>, increasing <strong>uptime</strong> with <strong>detector exchange in minutes</strong></li><li><strong>Four independent detector signals</strong> for <strong>simultaneous data collection</strong>, simplified data reduction and troubleshooting</li><li>Optional <strong>third isothermal oven</strong> for <strong>molecular sieve columns</strong></li><li>Designed for <strong>increased uptime</strong> and <strong>ease of support</strong></li><li><strong>Spacious independent valve oven</strong> with <strong>easy access</strong> to valves, rotors, actuators</li><li><strong>Heated sample bulkheads</strong> ensure <strong>complete sample transfer</strong></li><li><strong>Optimized system footprint</strong> to <strong>reduce bench space requirement</strong></li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/application::product.product/Thermo-TRACEtm-1310-Refinery-Gas-Analyzers-1.jpg" alt="Thermo Scientific TRACE 1310 GC Refinery Gas Analyzers" width="null" height="null"></p></div></div>

Thermo Scientific TRACE 1310 GC Analyzers for Oxygenates

TRACE 1310 GC analyzers for oxygenates: preconfigured, tested systems for refinery streams. Automated, Chromeleon CDS-ready, with full documentation and ASTM methods.

<div><p><strong>Automatically analyze single or multiple samples using the Thermo Scientific™ TRACE™ 1310 Analyzers for Oxygenates. These automated laboratory gas chromatography systems measure and report oxygenates and octane enhancers in refinery product streams. Systems are preconfigured, method tested, and ready to analyze samples after installation.&nbsp;</strong></p><p>These systems can use the powerful <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/76"><strong>Thermo Scientific™ Chromeleon™ Chromatotraphy Data System (CDS)</strong></a> to acquire and analyze chromatography data. Custom reporting allows generation of customer-specific reports. Each system is delivered with methods pre-installed and a complete documentation package that includes start-up, troubleshooting, plumbing diagram, and spare parts/consumables list.</p><div><p>We offer three systems configured for specific hydrocarbon streams and ASTM standard test methods. All systems utilize automated backflush of stripper column to prevent contamination of sensitive oxygentates column thus increasing uptime and performance.</p><h4><strong>TRACE™ 1310 GC for Oxygenates by ASTM D7423</strong></h4><ul><li>FID Channel detects and quantitates oxygenate compounds in light hydrocarbon streams C2-C5 as specified in ASTM D7423. Stripper column holds hydrocarbons up for backflush to prevent contamination of oxygenates column.</li></ul><h4><strong>TRACE™ 1310 GC for Oxygenates by ASTM D7754</strong></h4><ul><li>FID Channel detects and quantitates oxygenate compounds in spark ignition fuels (gasoline) as specified in the ASTM D7754. Stripper column holds hydrocarbons which are vented by a pressure point tee to prevent contamination of oxygenates column.</li></ul><h4><strong>TRACE™ 1310 GC for Oxygenates in Gasoline by ASTM D4815</strong></h4><ul><li>FID Channel detects and quantitates oxygenate compounds in spark ignition fuels (gasoline) as specified in the ASTM D4815. Stripper column holds hydrocarbons which are vented by a pressure point Tee to prevent contamination of oxygenates column.</li></ul><h3><strong>Built to maximize productivity and uptime</strong></h3><ul><li>Systems features<strong> Instant Connect detector modules</strong> increasing uptime with detector exchange in minutes</li><li>Heated sample bulkheads ensures complete sample transfer</li><li><strong>Automated injection</strong> for liquid samples</li><li><strong>Optimized system footprint</strong> to reduce benchspace requirement</li></ul></div></div>

Products from category Analyzers - page 1

Related content

Vendor Seminars at ISC 2026

Setting Target Measurement Uncertainty

Analytical Challenges and Strategies for Compound Identification Using Gas Chromatography–Ion Mobility Spectrometry