<p><strong>Dimethyl carbonate (DMC) plays a critical role in lithium-ion battery electrolytes, where solvent purity directly impacts performance, safety, and lifetime. Even trace-level impurities can contribute to degradation of solid electrolyte interfaces, consumption of lithium ions, or gas formation—effects that compromise both efficiency and safety.</strong></p><p>As battery materials continue to evolve, analytical approaches must provide both high sensitivity and high-confidence identification. A recent LECO application study demonstrates how combining two GC-MS platforms enables a more complete characterization of DMC impurities than either approach alone.</p><h3><strong>Why Impurity Characterization in DMC Is Challenging</strong></h3><p>Battery-grade solvents demand detection of contaminants across a wide concentration range, starting from major byproducts to trace-level species. In DMC, impurities may include oxygenated compounds, hydrocarbons, and nitriles, many of which arise from synthesis or handling processes.</p><p>These compounds can co-elute or exist at levels below typical detection thresholds, making comprehensive analysis difficult with a single analytical technique. In addition, electron ionization (EI) spectra do not always provide a clear molecular ion, complicating compound confirmation.</p><h3><strong>A Complementary Analytical Strategy: Sensitivity + Confidence</strong></h3><p>The application note demonstrates a combined workflow using the approach:</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1097"><strong>Pegasus BTX (GC-TOFMS)</strong></a>&nbsp;for high-sensitivity detection</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/38"><strong>Pegasus HRT (high-resolution GC-MS)</strong></a>&nbsp;for accurate mass confirmation</li></ul><p>The<strong> Pegasus BTX </strong>enables detection of impurities at<strong> below parts-per-billion levels</strong>, ensuring that even low-abundance analytes are captured.</p><p>Following detection, the<strong> Pegasus HRT</strong> provides high-resolution, accurate mass data in both EI and positive chemical ionization (PCI) modes. PCI is particularly valuable when EI spectra lack a clear molecular ion, allowing confirmation through common adduct species such as protonated molecular ions [M+H]⁺.</p><p>Because both ionization modes can be accessed without hardware changes, the workflow supports efficient, multi-dimensional confirmation of analyte identity.</p><h3><strong>Observations</strong></h3><p>Using this combined approach, multiple classes of impurities were identified in the DMC sample. These included:</p><ul><li>Oxygenated reaction byproducts</li><li>Alcohols, carbonates, and ethers</li><li>Hydrocarbons and aromatic species</li><li>Additional low-level analytes detected with high library match scores</li></ul><p>Importantly, the high sensitivity of the Pegasus BTX revealed a broader set of low-concentration compounds, while the Pegasus HRT increased confidence in compound identification through accurate mass measurements and confirmation of molecular formulas. &nbsp;</p><p>The study also highlights cases where co-eluting compounds were successfully deconvoluted, allowing individual components to be identified even without complete chromatographic separation.</p><h3><strong>Why This Matters for Battery Materials Analysis</strong></h3><p>This work illustrates a key principle for advanced materials characterization: detection and identification are distinct challenges that often require complementary solutions.</p><ul><li>Detection alone&nbsp;is insufficient without confident identification</li><li>High-resolution confirmation&nbsp;is limited if low-level species are not first detected</li></ul><p>By combining these capabilities, laboratories can gain deeper insight into solvent purity, production processes, and potential performance risks in battery systems.</p><h3><strong>Explore the Complete Study</strong></h3><p>This short overview highlights only a portion of the findings. The full application note provides:</p><ul><li>Detailed acquisition parameters and workflows</li><li>Chromatographic and spectral data examples</li><li>Confirmed impurity lists with retention times and similarity scores</li><li>Examples demonstrating EI/PCI complementarity and accurate mass confirmation</li></ul><p>To better understand how complementary GC-MS techniques can improve confidence in battery solvent analysis, download the full application note: <a target="_blank" rel="noopener noreferrer" href="https://www.leco.com/documents/203-821-731/"><strong>“Battery Solvent Characterization: Identifying Impurities in Dimethyl Carbonate”</strong>.</a></p>

 Confident Identification of Battery Solvent Impurities Using Complementary GC-MS Techniques

<p><strong>The international standard ISO/IEC 17025 [1] clause 7.7.2 with regards to ensuring the validity of results, requires a laboratory to participate in proficiency testing (PT) and/or to participate in interlaboratory comparisons (ILCs) other than PT. However, no guidance as to what these other ILCs might be, or indeed how they might compare in relation to PT, is provided. This leaflet aims to outline other ILCs available, pointing out some of the limitations as compared to PT.&nbsp;</strong></p><p>There are three major types of ILCs in which a group of laboratories analyses identical portions from a homogeneous, stable test sample, with each type being characterized by its intended purpose [2,3]:</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_2_d9263807fb.jpg" alt="Eurachem: Interlaboratory comparisons other than proficiency testing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_2_d9263807fb.jpg 245w," sizes="100vw" width="1507" height="607"></p><p>A key point is that PT is an ILC that is designed to specifically evaluate the performance of participants, providing them with an infrastructure to monitor and assess the validity of their results. This is not the key purpose of the two other ILCs, and thus depending on their intended purpose they have a number of limitations that laboratories need to be aware of when using them rather than PT. Only proficiency testing should have been conducted in full compliance to the competency standard ISO/IEC 17043 [4].&nbsp;</p><h4><strong>Evaluation of measurement procedure performance&nbsp;</strong></h4><p>These ILCs, are designed to assess how a particular measurement procedure performs and whether it is fit for its intended purpose. These ILCs are often referred to as a ‘method performance study’ or a ‘collaborative study’ [2]. Some limitations of using such ILCs for monitoring laboratory performance as an alternative to PT are:&nbsp;</p><ul><li>All participants use the same measurement procedure i.e. the measurement procedure that is being validated. Unless the measurement procedure is being routinely used by the participating laboratory such an ILC will not assess the routine performance of the laboratory using their own routine measurement procedure. Nor does it enable them to compare their performance with other laboratories using alternative measurement procedures.&nbsp;</li><li>The measurement procedure is likely to be new, so participants may not have established stable procedures and quality control, so performance may not reflect routine use.&nbsp;</li><li>The report from such an ILC would not provide information on the performance of the participant, if the statistical model used makes the assumption that all laboratories perform with equal variability.</li><li>The design of the study may require the participants to assess multiple samples and/or to undertake multiple replicate analysis on the test materials. This may not be representative of the routine measurements or tests undertaken by the laboratory.&nbsp;</li><li>The conclusion of the ILC might be that the measurement procedure being assessed is not valid.&nbsp;</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_3_a53ecd2f5d.jpg" alt="Eurachem: Interlaboratory comparisons other than proficiency testing" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Eurachem_Interlaboratory_comparisons_other_than_proficiency_testing_3_a53ecd2f5d.jpg 157w," sizes="100vw" width="570" height="566"></p><h4><strong>Characterisation of candidate reference materials&nbsp;</strong></h4><p>These are ILCs that assign a property value to a candidate reference material, usually with a stated measurement uncertainty. These are often referred to as a ‘material certification study’ [2]. Limitations of using such ILCs as an alternative to PT are:&nbsp;</p><ul><li>The analysis of the candidate reference material is likely to require additional care in exercising the routine measurement procedure, such as substantially more replication, and/or may require quite different reporting formats (e.g. all valid replicates instead of a mean result). Thus, such an ILC will not necessarily provide an evaluation of the performance of the laboratory based on the routine use of their measurement procedures.&nbsp;</li><li>The report from such an ILC may include the results from the participating laboratories but would not provide information on the performance of each laboratory.&nbsp;</li><li>Participating laboratories may be required to assess multiple samples and/or to undertake multiple replicate analysis on the candidate reference materials. Thus this may not be representative of the routine measurements or tests undertaken by the laboratory.&nbsp;</li></ul><h4><strong>Other ILCs&nbsp;</strong></h4><p>Some other ILCs, whilst not being conducted in full compliance of the requirements of ISO/IEC 17043, may be designed to evaluate participant performance. These would include small ILCs as defined by EA‑2/21 [5] or split sample ILCs i.e. where a portion of a single sample is sent to two or three laboratories. Whilst these ILCs are specifically designed to evaluate participant performance, they may not provide a comprehensive comparison that a PT might provide. In such cases the laboratory needs to evaluate carefully the competence of the organization managing the ILC and the suitability of the service externally provided (ISO/IEC 17025 clause 6.6).</p>

Interlaboratory comparisons other than proficiency testing

RI Calibration in NIST26 Chromatogram and Applying to Calculating RI in Samples

Article

Product

Application

Academy

Video

Software

Eurachem is a European network promoting international traceability of chemical measurements and good analytical practice. It provides expert guidance, supports method validation, uncertainty evaluation, proficiency testing, and facilitates discussion on technical and policy issues in analytical quality.

Eurachem

In 1936, the Laboratory Equipment Company introduced the first rapid carbon determinator for the American iron and steel industry.  Today, almost 80 years later, LECO is recognized globally as a leader in the development of high-quality analytical instrumentation, mass spectrometers, comprehensive two-dimensional chromatography, metallography & optical equipment as well as consumables.

LECO

My main interest is the identification of organic compounds by mass spectrometry in organic mixtures.

James Little/Mass Spec Interpretation Services

Watrex xTrovert FLEX-O automation SPE sample preparation system

FLEX-O robotic system enabling automation sample preparation on solid phase using 96-titre plates.

<p><strong>FLEX-O robotic system enabling automation sample preparation on solid phase using 96-titre plates. Although there are solutions for automatic SPE on classic column formats, robotic system for automation in 96-well SPE plates is not currently on the market.</strong></p><p>In addition to <strong>the 8-channel pipetting head</strong>, the robot is equipped with <strong>a gripper</strong> and <strong>a filling dispenser</strong>, which applies wash solutions to the SPE positions on the plate. Instead of filtering using classic vacuum pump, which is used for manual SPE on columns or 96plates, the <a target="_blank" rel="noopener noreferrer" href="https://watrex.com/obchod/laboratory-automation/xtrovert-flex-o/?utm_source=labrulez&amp;utm_medium=propagace&amp;utm_campaign=labrulez_produkty"><strong>xTrovert FLEX-O</strong></a> system uses the so-called <strong>positive pressure technology</strong> when it is the reagent is pushed through the SPE membrane with a multi-channel pressure attachment. That’s it ensuring <strong>flow uniformity and reproducibility</strong> between individual samples on the plate.</p><p>The robot is capable of <strong>processing up to 4 x 96-well sample plates</strong> (384 of total samples) using a protocol with <strong>up to 8 different washing and extraction reagents</strong>.The system is <strong>compatible with the Waters OligoWorks™ SPE Macroplate</strong> (96-well), <strong>Waters Oasis™ PRiME HLB</strong>, <strong>Macherey-Nagel™ SPE MULTI 96-Monoblock CHROMABOND™</strong> and other 96-plate format SPE systems.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Watrex_x_Trovert_FLEX_O_automation_SPE_sample_preparation_system_ec3768960e.jpg" alt="Watrex xTrovert FLEX-O automation SPE sample preparation system.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Watrex_x_Trovert_FLEX_O_automation_SPE_sample_preparation_system_ec3768960e.jpg 208w," sizes="100vw" width="1433" height="1075"></p><p>If necessary, the <strong>user can make modifications to the log</strong> using a simple scripting language and subsequent wireless upload to the device. Userthe interface for controlling the system is based on the integrated computer Raspberry Pi ® s 800×480 RGB LCD multi-touch touch screen and the possibility of remote wifi accessfrom an external device (e.g. mobile phone or tablet).</p><h4>Application</h4><ul><li><strong>Purification of oligonucleotide synthesis products</strong></li><li><strong>Organic Synthesis</strong></li><li><strong>Environmental Analysis</strong></li><li><strong>Medical diagnostics</strong></li><li><strong>Molecular biology and biochemistry</strong></li></ul><p>The entire system was designed and developed by Watrex Praha and is <strong>manufactured in the Czech Republic</strong> and promises a shift in the performance and efficiency of laboratory processes worldwide!</p>

Organomation ROT-X-TRACT-S Soxhlet extractor

Unlike traditional wire or sand baths which are used to heat receiving flasks, the ROT-X-TRACT-S uses a water steam bath which provides gentle even heat to delicate samples.

<p><strong>Soxhlet extraction is ideal for extracting soluble analytes from a solid sample into an organic solvent. Unlike traditional wire or sand baths which are used to heat receiving flasks, the ROT-X-TRACT-S uses a water steam bath which provides gentle even heat to delicate samples.</strong></p><p>The ROT-X-TRACT-S rotary Soxhlet extractors can accommodate up to <strong>8 or 10 Soxhlet extractors</strong>. The bath cover disc holes can accommodate round <strong>sample flasks from 125 ml-1 L</strong>. <strong>Models 13070</strong> and <strong>13090 </strong>can accommodate smaller <strong>250 mL flasks</strong>, while model <strong>13008</strong> can accommodate larger <strong>500 mL flasks</strong>. A wide range of sample sizes and quantities make this instrument ideal for Soxhlet extraction of samples in any lab.</p><h4><strong>Standard features</strong></h4><ul><li>Stainless steel construction</li><li>Stepped bath rim and cover disk seals steam chamber</li><li>Each condenser water line attached to centrally located water manifold</li><li>Laboratory grade materials stand up to organic solvents</li></ul><h4><strong>OPTIONS (Add to main Cat# when purchasing)</strong></h4><ul><li>Positive pressure type Z purged bath (Option Code -Z), Cat# 13070/13090/13008-Z</li><li>240V wiring and plug (Option Code -2), Cat# 13070/13090/13008-2</li></ul><h4><strong>ACCESSORIES</strong></h4><ul><li>P1332: O-rings for S-EVAP/RXT water manifold</li><li>All associated glassware</li><li>Rotary clamp manifold assembly</li><li>Bath cover disks</li></ul><h4><strong>Specification</strong></h4><h5><strong>Model 13070 – 8 Position, 37 mm Extractors</strong></h5><p>Ideal for labs using 250 mL round-bottom flasks, this model features a <strong>medium-size 12-inch ID water bath</strong> (Model 9125) and supports <strong>GS3137 or GS3129 glassware</strong>.</p><ul><li><strong>Overall Dimensions:</strong> 18 × 16 × 34 in (46 × 41 × 86 cm)</li><li><strong>Heating Power:</strong> 900 W</li><li><strong>Temperature Control:</strong> Dial thermostat with ±2 °C accuracy</li></ul><h5><strong>Model 13090 – 10 Position, 37 mm Extractors</strong></h5><p>This high-throughput option also works with <strong>250 mL flasks</strong> and uses a <strong>larger 16-inch ID bath</strong> (Model 16165) to accommodate 10 samples simultaneously.</p><ul><li><strong>Overall Dimensions:</strong> 24 × 19 × 34 in (61 × 48 × 86 cm)</li><li><strong>Heating Power:</strong> 1600 W</li><li><strong>Temperature Control:</strong> Dial thermostat with ±2 °C accuracy</li></ul><h5><strong>Model 13008 – 8 Position, 50 mm Extractors</strong></h5><p>For larger sample volumes, Model 13008 supports <strong>500 mL round-bottom flasks</strong> and includes a <strong>16-inch bath</strong> with higher accuracy temperature control. It uses <strong>GS3150 glassware</strong> and larger <strong>55/50 extractor joints</strong> for robust handling of bigger samples.</p><ul><li><strong>Overall Dimensions:</strong> 24 × 19 × 37 in (61 × 48 × 94 cm)</li><li><strong>Heating Power:</strong> 1600 W</li><li><strong>Temperature Control:</strong> Dial thermostat with <strong>±0.5 °C accuracy</strong></li></ul><h5><strong>Key Shared Features</strong></h5><ul><li><strong>Extractor Joint Sizes:</strong><ul><li>13070 &amp; 13090: 45/50, 24/40</li><li>13008: 55/50, 24/40</li></ul></li><li><strong>Condenser Options:</strong><ul><li><strong>Standard:</strong> Allihn</li><li><strong>Optional:</strong> Friedrichs (for enhanced cooling performance)</li></ul></li><li><strong>Condenser Joint Size:</strong> 55/50</li><li><strong>Bath Temperature Range:</strong> 40–100 °C</li><li><strong>Heating Medium:</strong> Water</li><li><strong>Bath Inside Dimensions:</strong><ul><li>13070: 12 × 4.5 in (30.5 × 11.4 cm)</li><li>13090 &amp; 13008: 16 × 4.5 in (40.6 × 11.4 cm)</li></ul></li></ul>

Organomation 12 Position N-EVAP Nitrogen Evaporator

The 12 position N-EVAP nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously.  At each individual sample position, the gas flow can be controlled via a precision needle valve.

<p><strong>The 12 position N-EVAP nitrogen evaporator (cat# 11155) is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position, the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying evaporation end points. The sample tray has a spring tensioner which allows any test tube between 10-30 mm to be processed without any modifications to the instrument. An optional small sample holder allows samples with an outside diameter of 5-16 mm to be processed.</strong></p><p>First introduced in 1959 as The Meyer N-EVAP, the 12 position N-EVAP (cat# 11155) was the first nitrogen dryer created by Organomation. It has proven to be an <strong>extremely durable, time tested and highly affordable </strong>member of Organomation’s N-EVAP line. These economical units provide controlled concentration of sample vials through the application of nitrogen gas within a heated water bath. The N-EVAP’s circular rotating design permits each sample to be accessible from the front of the instrument for easy insertion and retrieval. The chrome plated needle valves are individually milled from solid brass, enabling precise, uniform adjustments for your nitrogen blow down. This promotes efficient and safe sample reduction with minimal nitrogen waste.</p><ul><li><strong>Small Footprint:</strong> N-EVAP Model 111 requires under one square foot of bench space</li><li><strong>Flexible:</strong> An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li><strong>Customizable: </strong>Options are available for use with acidic or flammable solvents, heat- or water-sensitive samples, and more</li><li><strong>Individualized Control: </strong>Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_12_Position_N_EVAP_Nitrogen_Evaporator_5_339151fb9f.jpg" alt="Organomation 12 Position N-EVAP Nitrogen Evaporator ." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_12_Position_N_EVAP_Nitrogen_Evaporator_5_339151fb9f.jpg 156w," sizes="100vw" width="1400" height="1400"></p><h3><strong>STANDARD FEATURES</strong></h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-10 LPM</li><li>High pressure phthalate free tubing for safety</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly (except in dry bath model)</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3><strong>OPTIONS&nbsp;</strong></h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11155-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11155-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11155-RT</li></ul><h3><strong>SPECS</strong></h3><h4><strong>12p N-EVAP (Water Bath)</strong></h4><ul><li><strong>Bath Type</strong>: Water</li><li><strong>Instrumental Catalog Number</strong>: 11155</li><li><strong>Number of Sample Positions</strong>: 12</li><li><strong>Overall Dimension (w x d x h)</strong>: 13 x 11 x 31 in / 33 x 28 x 79 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Single Ring</li><li><strong>Test Tube Range (Standard Sample Holder)</strong>: 10–30 mm OD</li><li><strong>Test Tube Range (Optional Sample Holder)</strong>: 5–16 mm OD</li><li><strong>Gas Flow Meter</strong>: 0–10 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Sample Tray Lift Mechanism</strong>: Dual Band Spring Hoist Assembly</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: Standard</li><li><strong>Standard Gas Input Range</strong>: 20–30 psig</li><li><strong>Optional Gas Input Range with Optional Pressure Reducing Regulator</strong>: 30–160 psig</li><li><strong>Acid Resistant Coating (Option Code -RT)</strong>: Optional</li></ul><h5><strong>Heating Device Specs</strong></h5><ul><li><strong>Model Number</strong>: 5585</li><li><strong>Heating Medium</strong>: Water</li><li><strong>Inside Dimensions (Diameter × Depth)</strong>: 8.5 × 4.5 in / 21.6 × 11.4 cm</li><li><strong>Outside Dimensions (w × d × h)</strong>: 13 × 11 × 7 in / 33 × 28 × 18 cm</li><li><strong>Total Wattage</strong>: 550 W</li><li><strong>Bath Temperature Range</strong>: 30–90 °C</li><li><strong>Temperature Controller Type</strong>: Mechanical Thermostat</li><li><strong>Controller Accuracy</strong>: ± 2 °C</li></ul><h4><strong>12p N-EVAP (Dry Bath)</strong></h4><ul><li><strong>Bath Type</strong>: Dry</li><li><strong>Instrumental Catalog Number</strong>: 11155-DA</li><li><strong>Number of Sample Positions</strong>: 12</li><li><strong>Overall Dimension (w x d x h)</strong>: 13 x 11 x 27.5 in / 33 x 28 x 70 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Single Ring</li><li><strong>Test Tube Range (Standard Sample Holder)</strong>: 10–30 mm OD</li><li><strong>Test Tube Range (Optional Sample Holder)</strong>: 5–16 mm OD</li><li><strong>Gas Flow Meter</strong>: 0–10 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Sample Tray Lift Mechanism</strong>: None/Fixed</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: N/A</li><li><strong>Standard Gas Input Range</strong>: 20–30 psig</li><li><strong>Optional Gas Input Range with Optional Pressure Reducing Regulator</strong>: 30–160 psig</li><li><strong>Acid Resistant Coating (Option Code -RT)</strong>: Optional</li></ul><h5><strong>Heating Device Specs</strong></h5><ul><li><strong>Model Number</strong>: 5085</li><li><strong>Heating Medium</strong>: Aluminum Beads (Glass Beads in RT Models)</li><li><strong>Inside Dimensions (Diameter × Depth)</strong>: 8.5 × 4.5 in / 21.6 × 11.4 cm</li><li><strong>Outside Dimensions (w × d × h)</strong>: 13 × 11 × 7 in / 33 × 28 × 18 cm</li><li><strong>Total Wattage</strong>: 500 W</li><li><strong>Bath Temperature Range</strong>: 40–130 °C</li><li><strong>Temperature Controller Type</strong>: Mechanical Thermostat</li><li><strong>Controller Accuracy</strong>: ± 2 °C</li></ul><h4><strong>12p N-EVAP (No Bath)</strong></h4><ul><li><strong>Bath Type</strong>: None</li><li><strong>Instrumental Catalog Number</strong>: 11155-O</li><li><strong>Number of Sample Positions</strong>: 12</li><li><strong>Overall Dimension (w x d x h)</strong>: 12 × 8 × 31 in / 33 × 28 × 79 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Single Ring</li><li><strong>Test Tube Range (Standard Sample Holder)</strong>: 10–30 mm OD</li><li><strong>Test Tube Range (Optional Sample Holder)</strong>: 5–16 mm OD</li><li><strong>Gas Flow Meter</strong>: 0–10 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Sample Tray Lift Mechanism</strong>: Dual Band Spring Hoist Assembly</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: Standard</li><li><strong>Standard Gas Input Range</strong>: 20–30 psig</li><li><strong>Optional Gas Input Range with Optional Pressure Reducing Regulator</strong>: 30–160 psig</li><li><strong>Acid Resistant Coating (Option Code -RT)</strong>: Optional</li></ul><h3><strong>MODELS</strong></h3><h5><strong>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</strong></h5><ul><li>11155: <strong>Water Bath</strong></li><li>11155-NT: <strong>No Teflon, Water Bath*</strong></li><li>11155-DA: <strong>Dry Bath</strong></li><li>11155-O: <strong>No Bath</strong></li></ul><p><strong>*</strong> No Teflon (-NT) units designed for PFAS analysis using EPA methods 533, 537 and 537.1.<br><strong>**</strong>All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.</p><h3><strong>ACCESSORIES</strong></h3><ul><li>Small vessel sample holder, for vial outside diameters of 5-16 mm (cat# NA1132)</li><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>Pressure reducing regulator 0-160 psi (cat# NA0630)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3><strong>REPLACEMENT PARTS</strong></h3><ul><li>P0627: <strong>Valve Tube Assembly</strong> – Post 1997</li><li>P0607:<strong> Luer &amp; washer for N-EVAP valve tube</strong></li><li>P0634: <strong>Tube Fitting nylon 3 part for N-EVAP valve tube</strong></li></ul>

Organomation 24 Position N-EVAP Nitrogen Evaporator

The 24 position N-EVAP is our most adaptable benchtop evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. 

<p><strong>The 24 position N-EVAP is our most adaptable benchtop evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can accommodate samples with an outside diameter of 10-30 mm. However, with the optional 8 position large sample holder, vials with an outside diameter of 30-70 mm can be processed. The 24 position N-EVAP test tube evaporator can also be upgraded to include digital controls for heat and time with the addition of the side control box (Option code -CB).</strong></p><p>These economical units provide controlled concentration of sample vials through the application of nitrogen gas within a heated water bath. The dual band spring hoist assembly provides a simple and effective means of removing samples from the heated water bath. The N-EVAP’s circular rotating design permits each sample to be accessible from the front of the instrument for easy insertion and retrieval. The chrome plated needle valves are individually milled from solid brass, enabling precise, uniform adjustments for your nitrogen blow down. This promotes efficient and safe sample reduction with minimal nitrogen waste. Time tested technology and proven construction ensure a long lasting, user-friendly experience.</p><ul><li><strong>Gentle: </strong>N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples</li><li><strong>Flexible: </strong>An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li><strong>Customizable: </strong>A large sample holder option can be added to accommodate vials with a larger outside diameter up to 70 mm</li><li><strong>Individualized Control: </strong>Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_24_Position_N_EVAP_Nitrogen_Evaporator_2_18a854b63f.jpg" alt="Organomation 24 Position N-EVAP Nitrogen Evaporator ." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_24_Position_N_EVAP_Nitrogen_Evaporator_2_18a854b63f.jpg 156w," sizes="100vw" width="1400" height="1400"></p><h3><strong>STANDARD FEATURES</strong></h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-20 LPM</li><li>High pressure phthalate free tubing for safety</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly (except in dry bath model)</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3><strong>OPTIONS&nbsp;</strong></h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11250-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11250-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11250-RT</li><li>Side control box with built-in digital controller, timer, and pressure regulator (Option Code -CB), Cat# 11250-CB</li></ul><h3><strong>SPECS</strong></h3><h4><strong>24 Position N-EVAP (Water Bath)</strong></h4><ul><li><strong>Bath Type</strong>: Water</li><li><strong>Instrumental Catalog Number</strong>: 11250</li><li><strong>Number of Sample Positions</strong>: 24</li><li><strong>Overall Dimension (w × d × h)</strong>: 16 × 15 × 33 in / 41 × 38 × 84 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Single Ring</li><li><strong>Test Tube Range (Standard Sample Holder)</strong>: 10–30 mm OD</li><li><strong>Test Tube Range (Optional Sample Holder)</strong>: 30–70 mm OD</li><li><strong>Gas Flow Meter</strong>: 0–20 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Sample Tray Lift Mechanism</strong>: Dual Band Spring Hoist Assembly</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: Standard</li><li><strong>Standard Gas Input Range</strong>: 20–30 psig</li><li><strong>Gas Input Range with Optional Pressure Reducing Regulator</strong>: 30–160 psig</li><li><strong>Acid Resistant Coating</strong>: Optional</li></ul><h5><strong>Heating Device Specs</strong></h5><ul><li><strong>Model Number</strong>: 9125</li><li><strong>Heating Medium</strong>: Water</li><li><strong>Inside Dimensions (Diameter × Depth)</strong>: 12.0 × 4.5 in / 30.5 × 11.4 cm</li><li><strong>Outside Dimensions (w × d × h)</strong>: 16 × 15 × 7 in / 41 × 38 × 18 cm</li><li><strong>Total Wattage</strong>: 900 W</li><li><strong>Bath Temperature Range</strong>: 30–90 °C</li><li><strong>Temperature Controller Type</strong>: Mechanical Thermostat</li><li><strong>Controller Accuracy</strong>: ±2 °C</li></ul><h4><strong>24 Position N-EVAP (Dry Bath)</strong></h4><ul><li><strong>Bath Type</strong>: Dry</li><li><strong>Instrumental Catalog Number</strong>: 11250-DA</li><li><strong>Number of Sample Positions</strong>: 24</li><li><strong>Overall Dimension (w × d × h)</strong>: 16 × 15 × 27.5 in / 41 × 38 × 70 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Single Ring</li><li><strong>Test Tube Range (Standard Sample Holder)</strong>: 10–30 mm OD</li><li><strong>Test Tube Range (Optional Sample Holder)</strong>: 30–70 mm OD</li><li><strong>Gas Flow Meter</strong>: 0–20 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Sample Tray Lift Mechanism</strong>: None/Fixed</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: N/A</li><li><strong>Standard Gas Input Range</strong>: 20–30 psig</li><li><strong>Gas Input Range with Optional Pressure Reducing Regulator</strong>: 30–160 psig</li><li><strong>Acid Resistant Coating</strong>: Optional</li></ul><h5><strong>Heating Device Specs</strong></h5><ul><li><strong>Model Number</strong>: 5125</li><li><strong>Heating Medium</strong>: Aluminum Beads (Glass Beads in RT Models)</li><li><strong>Inside Dimensions (Diameter × Depth)</strong>: 12.0 × 4.5 in / 30.5 × 11.4 cm</li><li><strong>Outside Dimensions (w × d × h)</strong>: 16 × 15 × 7 in / 41 × 38 × 18 cm</li><li><strong>Total Wattage</strong>: 540 W</li><li><strong>Bath Temperature Range</strong>: 40–130 °C</li><li><strong>Temperature Controller Type</strong>: Mechanical Thermostat</li><li><strong>Controller Accuracy</strong>: ±2 °C</li></ul><h4><strong>24 Position N-EVAP (No Bath)</strong></h4><ul><li><strong>Bath Type</strong>: None</li><li><strong>Instrumental Catalog Number</strong>: 11250-O</li><li><strong>Number of Sample Positions</strong>: 24</li><li><strong>Overall Dimension (w × d × h)</strong>: 16 × 15 × 31.75 in / 41 × 38 × 81 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Single Ring</li><li><strong>Test Tube Range (Standard Sample Holder)</strong>: 10–30 mm OD</li><li><strong>Test Tube Range (Optional Sample Holder)</strong>: 30–70 mm OD</li><li><strong>Gas Flow Meter</strong>: 0–20 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Sample Tray Lift Mechanism</strong>: Dual Band Spring Hoist Assembly</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: Standard</li><li><strong>Standard Gas Input Range</strong>: 20–30 psig</li><li><strong>Gas Input Range with Optional Pressure Reducing Regulator</strong>: 30–160 psig</li><li><strong>Acid Resistant Coating</strong>: Optional</li></ul><h3><strong>MODELS</strong></h3><h5><strong>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</strong></h5><ul><li>11250: <strong>Water Bath</strong></li><li>11250-NT: <strong>No Teflon, Water Bath*</strong></li><li>11250-DA: <strong>Dry Bath</strong></li><li>11250-O: <strong>No Bath**</strong></li></ul><p><strong>*</strong> No Teflon (-NT) units designed for PFAS analysis using EPA methods 533, 537 and 537.1.<br><strong>**</strong>All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.</p><h3><strong>ACCESSORIES</strong></h3><ul><li>Large vessel sample holder, 8 positions, for vial outside diameters of 30-70 mm (cat# NA1228)</li><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>Pressure reducing regulator 0-160 psi (cat# NA0630)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3><strong>REPLACEMENT PARTS</strong></h3><ul><li>P0627: <strong>Valve Tube Assembly</strong> – Post 1997</li><li>P0607:<strong> Luer &amp; washer for N-EVAP valve tube</strong></li><li>P0634: <strong>Tube Fitting nylon 3 part for N-EVAP valve tube</strong></li></ul>

Organomation 34 Position N-EVAP Nitrogen Evaporator

Our 34-position nitrogen evaporator (cat# 11634) offers a large number of sample positions, without compromising any of the classic N-EVAP features. 

<p><strong>Our 34-position nitrogen evaporator (cat# 11634) offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of all our N-EVAPs. The evaporative system, along with the standard flow control and pressure reducing regulator, enables the operator to achieve the desired level of concentration with efficient nitrogen usage. Our unique dual band spring hoist assembly ensures easy and effective operator use.</strong></p><p>Additionally, the 34 position N-EVAP includes a side control box, which provides timed and digitally controlled water bath temperatures to produce even evaporation rates. The pressure regulator and timer combine to allow timed automatic gas flow cut off which slows evaporation to a minimum once the timed cycle has been completed. In order to prevent damage to delicate samples, the timer also provides the option for the heat to shut off once the cycle is complete.</p><ul><li><strong>Gentle: </strong>N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples</li><li><strong>Flexible: </strong>An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li><strong>Precise: </strong>Digital controls allow exact temperature regulation</li><li><strong>Individualized Control: </strong>Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_34_Position_N_EVAP_Nitrogen_Evaporator_3_04176ee4e2.jpg" alt="Organomation 34 Position N-EVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_34_Position_N_EVAP_Nitrogen_Evaporator_3_04176ee4e2.jpg 156w," sizes="100vw" width="1400" height="1400"></p><h3><strong>STANDARD FEATURES</strong></h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-30 LPM</li><li>Built-in pressure reducing regulator</li><li>Side control box</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Safety control cover plate</li><li>High pressure phthalate free tubing&nbsp;</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly&nbsp;</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3><strong>OPTIONS&nbsp;</strong></h3><ul><li>220v wiring harness (Option Code# -2), Cat# 111634-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11634-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11634-RT</li></ul><h3><strong>SPECS</strong></h3><h4><strong>34 Position N-EVAP (Water Bath)</strong></h4><ul><li><strong>Bath Type</strong>: Water</li><li><strong>Instrumental Catalog Number</strong>: 11634</li><li><strong>Number of Sample Positions</strong>: 34</li><li><strong>Overall Dimension (w × d × h)</strong>: 24 × 19 × 34 in / 61 × 48 × 86 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Single Ring</li><li><strong>Test Tube Range (Standard Sample Holder)</strong>: 10–30 mm OD</li><li><strong>Gas Flow Meter</strong>: 0–30 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Built-in Nitrogen Gauge Input</strong>: 30–110 psig</li><li><strong>Sample Tray Lift Mechanism</strong>: Dual Band Spring Hoist Assembly</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: Standard</li><li><strong>Acid Resistant Coating</strong>: Optional</li></ul><h5><strong>Heating Device Specs</strong></h5><ul><li><strong>Model Number</strong>: 13165</li><li><strong>Heating Medium</strong>: Water</li><li><strong>Inside Dimensions (Diameter × Depth)</strong>: 16.0 × 4.5 in / 40.6 × 11.4 cm</li><li><strong>Outside Dimensions (w × d × h)</strong>: 24 × 19 × 6 in / 61 × 48 × 15 cm</li><li><strong>Total Wattage</strong>: 1300 W</li><li><strong>Bath Temperature Range</strong>: 30–90 °C</li><li><strong>Temperature Controller Type</strong>: Digital Electronic with LED Display</li><li><strong>Controller Accuracy</strong>: ±2 °C</li><li><strong>Side Mounted Control Box with Timer for Nitrogen &amp; Heat</strong>: Standard</li></ul><h4><strong>34 Position N-EVAP (No Bath)</strong></h4><ul><li><strong>Bath Type</strong>: None</li><li><strong>Instrumental Catalog Number</strong>: 11634-O</li><li><strong>Number of Sample Positions</strong>: 34</li><li><strong>Overall Dimension (w × d × h)</strong>: 19 × 17 × 32 in / 48 × 43 × 81 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Single Ring</li><li><strong>Test Tube Range (Standard Sample Holder)</strong>: 10–30 mm OD</li><li><strong>Gas Flow Meter</strong>: 0–30 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Built-in Nitrogen Gauge Input</strong>: 30–110 psig</li><li><strong>Sample Tray Lift Mechanism</strong>: Dual Band Spring Hoist Assembly</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: Standard</li><li><strong>Acid Resistant Coating</strong>: Optional</li></ul><h3><strong>MODELS</strong></h3><h5><strong>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</strong></h5><ul><li>11634: <strong>Water</strong></li><li>11634-O: <strong>No Bath*</strong></li></ul><p><strong>*</strong>All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.</p><h3><strong>ACCESSORIES</strong></h3><ul><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3><strong>REPLACEMENT PARTS</strong></h3><ul><li>P0627: <strong>Valve Tube Assembly</strong> – Post 1997</li><li>P0607:<strong> Luer &amp; washer for N-EVAP valve tube</strong></li><li>P0634: <strong>Tube Fitting nylon 3 part for N-EVAP valve tube</strong></li></ul>

Organomation 45 Position N-EVAP Nitrogen Evaporator

Our 45-position nitrogen evaporator offers the largest number of sample positions in our N-EVAP line. 

<p><strong>Our 45-position nitrogen evaporator (Catalog # 11645) offers the largest number of sample positions in our N-EVAP line. The sample holder has dual circular rings. The outer ring has 30 positions and can accommodate samples with an outside diameter of 10-19 mm The inner ring has 15 positions and can accommodate samples with an outside diameter of 16-30 mm and a minimum height of 70 mm.</strong></p><p>This time-tested, durable system provides the least expensive price per position of all our N-EVAPs. The evaporative system, along with the standard flow control and pressure reducing regulator, enables the operator to achieve the desired level of concentration with efficient nitrogen usage. Our unique dual band spring hoist assembly ensures easy and effective operator use. Additionally, the 45 position N-EVAP includes a side control box. Timed, digitally controlled water bath temperatures provide even evaporation rates. The pressure regulator and timer combine to allow timed automatic gas flow cut off which slows evaporation to a minimum once the timed cycle has been completed. The heat can also be shut off with the gas after a timed cycle.</p><ul><li><strong>Gentle: </strong>N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples</li><li><strong>Flexible: </strong>An adjustable sample holder design fits a wide variety of sample tubes and vials at once</li><li><strong>Precise: </strong>Digital controls allow exact temperature regulation</li><li><strong>Individualized Control: </strong>Optimize evaporation of diverse samples with individual gas flow control at each vial</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Organomation_45_Position_N_EVAP_Nitrogen_Evaporator_5_20078e3969.jpg" alt="Organomation: 45 Position N-EVAP Nitrogen Evaporator." srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Organomation_45_Position_N_EVAP_Nitrogen_Evaporator_5_20078e3969.jpg 156w," sizes="100vw" width="1400" height="1400"></p><h3><strong>STANDARD FEATURES</strong></h3><ul><li>Nitrogen filter</li><li>Adjustable flow meter, 0-30 LPM</li><li>Built-in pressure reducing regulator</li><li>Side control box</li><li>Digital temperature controller</li><li>Electronic timer</li><li>Safety control cover plate</li><li>High pressure phthalate free tubing&nbsp;</li><li>High temperature limit switch for safety</li><li>Dual band spring hoist assembly&nbsp;</li><li>Precision needle valve tube assembly</li><li>Needles, 4 inch x 19 gauge with chrome plated brass hub and stainless steel shaft</li></ul><h3><strong>OPTIONS&nbsp;</strong></h3><ul><li>220v wiring harness (Option Code# -2), Cat# 11645-2</li><li>Z-Purge/positive pressure purge case (Option Code# -Z), Cat# 11645-Z</li><li>Acid resistant coating on instrument and needles (Option Code# -RT), Cat# 11645-RT</li></ul><h3><strong>SPECS</strong></h3><h4><strong>45 Position N-EVAP (Water Bath)</strong></h4><ul><li><strong>Bath Type</strong>: Water</li><li><strong>Instrumental Catalog Number</strong>: 11645</li><li><strong>Number of Sample Positions</strong>: 45</li><li><strong>Overall Dimension (w × d × h)</strong>: 24 × 19 × 34 in / 61 × 48 × 86 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Dual Rings</li><li><strong>Outer Circle Sample Holder Test Tube Range</strong>: 10–19 mm OD</li><li><strong>Inner Circle Sample Holder Test Tube Range</strong>: 16–30 mm OD; &gt;70 mm height</li><li><strong>Gas Flow Meter</strong>: 0–30 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Sample Tray Lift Mechanism</strong>: Dual Band Spring Hoist Assembly</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: Standard</li><li><strong>Built-in Nitrogen Gauge Input</strong>: 30–110 psig</li><li><strong>Acid Resistant Coating</strong>: Optional</li></ul><h5><strong>Heating Device Specs</strong></h5><ul><li><strong>Model Number</strong>: 13165</li><li><strong>Heating Medium</strong>: Water</li><li><strong>Inside Dimensions (Diameter × Depth)</strong>: 16.0 × 4.5 in / 40.6 × 11.4 cm</li><li><strong>Outside Dimensions (w × d × h)</strong>: 24 × 19 × 6 in / 61 × 48 × 15 cm</li><li><strong>Total Wattage</strong>: 1300 W</li><li><strong>Bath Temperature Range</strong>: 30–90 °C</li><li><strong>Temperature Controller Type</strong>: Digital Electronic with LED Display</li><li><strong>Controller Accuracy</strong>: ±2 °C</li><li><strong>Side Mount Control Box with Timer for Nitrogen &amp; Heat</strong>: Standard</li></ul><h4><strong>45 Position N-EVAP (No Bath)</strong></h4><ul><li><strong>Bath Type</strong>: None</li><li><strong>Instrumental Catalog Number</strong>: 11645-O</li><li><strong>Number of Sample Positions</strong>: 45</li><li><strong>Overall Dimension (w × d × h)</strong>: 24 × 19 × 32 in / 61 × 48 × 81 cm</li><li><strong>Sample Holder Layout</strong>: Circular</li><li><strong>Gas Manifold Layout</strong>: Dual Rings</li><li><strong>Outer Circle Sample Holder Test Tube Range</strong>: 10–19 mm OD</li><li><strong>Inner Circle Sample Holder Test Tube Range</strong>: 16–30 mm OD; 70 mm height</li><li><strong>Gas Flow Meter</strong>: 0–30 L/min</li><li><strong>Stainless Steel Needles (Length × Gauge)</strong>: 4.0 in × 19 ga / 102 mm × 19 ga</li><li><strong>Sample Tray Lift Mechanism</strong>: Dual Band Spring Hoist Assembly</li><li><strong>Rotating, Leak Tight Gas Fitting</strong>: Standard</li><li><strong>Built-in Nitrogen Gauge Input</strong>: 30–110 psig</li><li><strong>Acid Resistant Coating</strong>: Optional</li></ul><h3><strong>MODELS</strong></h3><h5><strong>Catalog Number &nbsp;/&nbsp;&nbsp;&nbsp;Bath Type</strong></h5><ul><li>11645: <strong>Water Bath</strong></li><li>11634-O: <strong>No Bath*</strong></li></ul><p><strong>*</strong>All “-O” models come with a base and stand assembly instead of a heated bath. These instruments are designed for evaporation procedures performed at ambient temperature.</p><h3><strong>ACCESSORIES</strong></h3><ul><li>Nitrogen generator (cat# NA1955)</li><li>Pasteur pipette adapters (cat# NA0636)</li><li>High temperature silicone fluid (cat# NA1240)</li><li>Various needle sizes and gauges</li></ul><h3><strong>REPLACEMENT PARTS</strong></h3><ul><li>P0627: <strong>Valve Tube Assembly</strong> – Post 1997</li><li>P0607:<strong> Luer &amp; washer for N-EVAP valve tube</strong></li><li>P0634: <strong>Tube Fitting nylon 3 part for N-EVAP valve tube</strong></li></ul>

Waters Andrew+ pipetting robot

Andrew+ pipetting robot offers fully automated liquid handling using electronic pipettes and labware holders called Dominos.

<div data-id="7b8f701" data-element_type="widget" data-widget_type="heading.default"><div><h3><strong>Discover lab automation within reach</strong></h3></div></div><div data-id="c1b56fb" data-element_type="widget" data-widget_type="text-editor.default"><div><p><strong>Andrew+ pipetting robot offers fully automated liquid handling using electronic pipettes and labware holders called Dominos. By adding Device+, our ever-expanding portfolio of connected devices and tools for processes such as heating, shaking or labware transportation, Andrew+ evolves into a full walk-away automation solution.</strong></p><p>Creating the connected laboratory, Andrew+ is part of the&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://www.andrewalliance.com/laboratory-software/"><strong>OneLab</strong></a>&nbsp;ecosystem, executing laboratory protocols designed in OneLab.&nbsp; This flexible architecture enables you to effortlessly transition from laborious manual pipetting procedures to error-free, fully-robotized lab workflows – without any knowledge of programming, laboratory robotics or automation engineering.</p><blockquote><p class="cke-user_style-important"><strong>Video: </strong><a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=IGu3YxkkZY0"><strong>Andrew+ Demo</strong></a></p></blockquote><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Andrew_pipetting_robot_4_0569f8609e.jpg" alt="Waters Andrew+ pipetting robot" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Andrew_pipetting_robot_4_0569f8609e.jpg 245w," sizes="100vw" width="1440" height="540"></p><h3><strong>Andrew+ Case Studies&nbsp;</strong></h3><blockquote><p class="cke-user_style-important"><a target="_blank" rel="noopener noreferrer" href="https://www.andrewalliance.com/category/case-studies/"><span>See all case studies</span>&nbsp;</a></p></blockquote><div data-id="ee37b9e" data-element_type="widget" data-widget_type="heading.default"><div><h3><strong>Watch Andrew+ in action</strong></h3></div></div><div data-id="b265a33" data-element_type="widget" data-widget_type="text-editor.default"><div><p>In these videos, our biologists explain how Andrew+ enables users to automate commonly used, laborious, liquid handling for PCR Prep and Plasmid DNA Purification, respectively, whilst ensuring superior repeatability and full traceability.</p><blockquote><p class="cke-user_style-important"><strong>Video: </strong><a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=RnxDri3Z7f4"><strong>PCR Prep</strong></a></p><p class="cke-user_style-important"><strong>Video: </strong><a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/watch?v=oWOkzqF9X9I"><strong>Plasmid DNA Prep</strong></a></p></blockquote><div data-id="fc9cb9e" data-element_type="column"><div><div data-id="cbb1a9b" data-element_type="widget" data-widget_type="heading.default"><div><h3><strong>Intuitive user interface</strong></h3></div></div><div data-id="3799119" data-element_type="widget" data-widget_type="text-editor.default"><div><div><div><div><div><div><p>Reproducibility and full traceability of sample preparation is assured using a highly intuitive browser-based software environment.&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://www.andrewalliance.com/laboratory-software/"><strong>OneLab</strong></a> enables scientists to graphically design their own pipetting protocols in minutes and execute them straight away in any laboratory in the world, even allowing the remote monitoring of ongoing experiments. Use a flexible and secure platform that withstands the rigors of regulatory validation.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Onelab_design_2_489d32ac68/Waters-Onelab-design-2_l.webp" alt="Waters-Onelab-design-2_l.webp" width="1027" height="488"></p><div data-id="9199ea6" data-element_type="column"><div><div data-id="6db85f8" data-element_type="widget" data-widget_type="heading.default"><div><h3><strong>Widest pipetting volume range</strong></h3></div></div><div data-id="ae0caea" data-element_type="widget" data-widget_type="text-editor.default"><div><p>Andrew+ pipetting robot uses single and multichannel electronic pipettes, ensuring the best liquid handling performance and maximum flexibility. Smart electronic pipettes are manufactured by Sartorius and based upon their acclaimed Picus pipettes.</p><p>Electronic pipettes are optimized for used with the Andrew+ pipetting robot, allowing greater flexibility in the type of liquid handling experiments that can be run, providing superior experiment reproducibility, pipetting speed and a market leading dynamic range of dispensing volumes for a liquid handing robot –from 0.2 µL up to 10 mL.</p><figure class="image"><img style="aspect-ratio:529/382;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Andrew_pipetting_robot_f5ca4f825d.jpg" alt="Waters Andrew+ pipetting robot.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Andrew_pipetting_robot_f5ca4f825d.jpg 216w," sizes="100vw" width="529" height="382"></figure><div data-id="ed235f6" data-element_type="column"><div><div data-id="ef6b933" data-element_type="widget" data-widget_type="heading.default"><div><h3><strong>Andrew+ is compact</strong></h3></div></div><div data-id="7537e2e" data-element_type="widget" data-widget_type="text-editor.default"><div><div><div><div><div><div><p>The liquid handling robot is designed to fit the majority of laboratory benches and biosafety cabinets (BSC). Andrew+, even with 2 full rows of Dominos&nbsp;<i>(</i>allowing to use 7 microplates or 56 falcon tubes or 168 microtubes) occupies a depth of ~55cm/22”, that fits even the smallest hoods. The unique compact size and design of our liquid handler allows it to work at a temperature of 20°C-37°C.&nbsp;</p><figure class="image"><img style="aspect-ratio:836/556;" src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Andrew_pipetting_robot_2_fb174b1453.jpg" alt="Waters Andrew+ pipetting robot - 2.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Andrew_pipetting_robot_2_fb174b1453.jpg 235w," sizes="100vw" width="836" height="556"></figure><div data-id="c9b37a7" data-element_type="widget" data-widget_type="heading.default"><div><h3><strong>Versatile working deck, tools and devices for all your needs</strong></h3></div></div><section data-id="b802f90" data-element_type="section" data-settings="{&quot;jet_parallax_layout_list&quot;:[]}"><div><div data-id="3e689f0" data-element_type="column"><div><div data-id="5dc9372" data-element_type="widget" data-widget_type="text-editor.default"><div><p>The Andrew+ deck layout is quickly adaptable to your experiment materials and are incredibly easy to set with the ever-expanding range of Dominos: a magnetic-based modular solution that enables Andrew+ to use a broad range of consumables.</p></div></div></div></div><div data-id="5626074" data-element_type="column"><div><div data-id="40c6ef1" data-element_type="widget" data-widget_type="text-editor.default"><div><p>In addition to pipetting liquids, the Andrew+ liquid handler can perform a wide range of complex experimental steps such as tube/plate transport or solid-phase extraction using vacuum.<br>Thanks to OneLab, you will benefit to a seamless integration of new capabilities added to your setting.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Waters_Andrew_pipetting_robot_3_89b87a0d2e.jpg" alt="Waters Andrew+ pipetting robot - 3.jpg" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Waters_Andrew_pipetting_robot_3_89b87a0d2e.jpg 245w," sizes="100vw" width="1734" height="598"></p><div data-id="d090821" data-element_type="column"><div><div data-id="f9d733b" data-element_type="widget" data-widget_type="heading.default"><div><h3><strong>Automated Protocols with Andrew+</strong></h3><p>Specifically optimized for Andrew+, various applications and methods guarantee the delivery of better pipetting accuracy and improved reproducibility.</p><blockquote><ul><li><div><a target="_blank" rel="noopener noreferrer" href="https://onelab.andrewalliance.com/library/sars-cov-2-lc-ms-kit-ruo-9lwrvwkA"><span>Automated preparation of SARS-CoV-2 peptides for LC-MS analysis</span></a></div></li><li><div><a target="_blank" rel="noopener noreferrer" href="https://onelab.andrewalliance.com/library/automated-antibody-purification-jlwKQ0aY"><span>Automated Antibody Purification for higher recovery and reproducibility</span></a></div></li><li><div><a target="_blank" rel="noopener noreferrer" href="https://onelab.andrewalliance.com/app/lab/bl6MQP6z/library/standard-curve-generation-KlwRbwR3"><span>Reliable and Robust Sample Prep for Standard Curve Generation</span></a></div></li></ul><p class="cke-user_style-important"><a target="_blank" rel="noopener noreferrer" href="https://onelab.andrewalliance.com/library"><span><strong>More to discover in the Protocol Library</strong></span></a></p></blockquote><h3><strong>Get an extra pair of hands</strong></h3><div data-id="aa4715f" data-element_type="widget" data-widget_type="heading.default"><div><h4><strong>Reproducibility</strong></h4></div></div><div data-id="a1d2f3b" data-element_type="widget" data-widget_type="text-editor.default"><div><div><div data-animationtype="fadeInDown" data-animationduration="0.7" data-animationoffset="top-into-view"><div><p>Laboratory automation eliminates most human errors resulting in more reliable data and improved productivity. Together with complete integration inside OneLab, all experimental data from Andrew+ will be recorded and stored, improving the traceability of experiments and the data analysis.</p><div data-id="fb36639" data-element_type="widget" data-widget_type="heading.default"><div><h4><strong>Productivity</strong></h4></div></div><div data-id="c5f6abd" data-element_type="widget" data-widget_type="text-editor.default"><div><div><div data-animationtype="fadeInDown" data-animationduration="0.7" data-animationoffset="top-into-view"><div><div><div data-animationtype="fadeInDown" data-animationduration="0.7" data-animationoffset="top-into-view"><div><p>Andrew+ combines the flexibility of single channel pipetting (0.2 μL to 10 mL) with the higher throughput of multichannel pipetting. In addition, Andrew+ reduces the need to repeat experiments due to pipetting errors.</p><div data-id="0a035d7" data-element_type="widget" data-widget_type="heading.default"><div><h4><strong>Promoting health</strong></h4></div></div><div data-id="a72e364" data-element_type="widget" data-widget_type="text-editor.default"><div><div><div data-animationtype="fadeInDown" data-animationduration="0.7" data-animationoffset="top-into-view"><div><div id="applications"><div><div><div><div><div id="icon-area" data-animationoffset="top-into-view"><div><div data-animationtype="fadeInDown" data-animationduration="0.7" data-animationoffset="top-into-view"><div><p>Pipetting requires repetitive movements (of up to 500 times per day for the average user) that can lead to musculo-skeletal disorders like repetitive strain injury. Andrew+ helps eliminates physical stress to professionals, and also reduces the risk of exposure to hazardous materials used in certain experimental procedures.</p></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></section></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div>

Thermo Scientific Dionex AutoTrace 280 Solid-Phase Extraction Instrument

Extract analytes of interest from large volume aqueous samples easily and efficiently with the Thermo Scientific™ Dionex™ AutoTrace™ 280 Solid-Phase Extraction (SPE) Instrument.

<p><strong>Extract analytes of interest from large volume aqueous samples easily and efficiently with the Thermo Scientific™ Dionex™ AutoTrace™ 280 Solid-Phase Extraction (SPE) Instrument.&nbsp;</strong></p><p>The AutoTrace 280 automates all four steps of SPE (conditioning, loading, rinsing, and eluting), reducing solvent consumption and improving recovery and reproducibility. Boost productivity and reduce cost of analysis by simultaneously processing up to six samples in 2-3 hours with only 15 minutes of operator involvement. The AutoTrace 280 meets requirements in US EPA methods including the 500 and 600 series.</p><h5><strong>Improved reliability and recovery</strong></h5><ul><li>Automated SPE minimizes operator intervention</li><li>Positive pressure loading and elution of samples and solvents provide constant flow for improved analytical precision</li></ul><h5><strong>Flexibility in operation</strong></h5><ul><li>Loads sample volumes from 20 mL to 4 L</li><li>Compatible with 1, 3, and 6 mL cartridges and with 47 mm SPE disks</li><li>Automatically conditions, rinses, and elutes SPE cartridges with a choice of five solvents</li><li>Offers a choice of six different collection vial racks</li></ul><h5><strong>Improved laboratory safety</strong></h5><ul><li>Minimal sample handling reduces operator exposure to hazardous chemicals</li><li>No hood required</li></ul><h5><strong>Enhanced laboratory productivity and reduced costs</strong></h5><ul><li>Unattended operation</li><li>Batch processing of up to 6 samples</li><li>Reduced solvent usage</li><li>Segregates aqueous and solvent waste using separate waste lines for efficient, cost-effective waste handling</li></ul><h5><strong>Supports a range of matrices and applications</strong></h5><ul><li>Ability to process samples containing suspended solids</li><li>Meets requirements for solid-phase extraction for U.S. EPA methods including 500 and 600 series</li></ul><h5><strong>Recommended use</strong></h5><ul><li>Analyze prepared samples with Thermo Scientific LC or GC systems for a fully integrated workflow</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Instrument Type:</strong> Automated Solid Phase Extraction (SPE) System</li><li><strong>Application:</strong> For use with 47 mm SPE disks</li><li><strong>Model Description:</strong> AutoTrace 280 SPE System</li></ul><h5><strong>Performance &amp; Operating Details</strong></h5><ul><li><strong>Disk Compatibility:</strong> Designed for 47 mm SPE disks</li><li><strong>Pressure Range:</strong><ul><li>Output: 0 to 30 psi (0 to 1.4 bar)</li><li>Input: Up to 100 psi (6.9 bar) maximum</li></ul></li><li><strong>Voltage:</strong> 100–240 V ±10%</li><li><strong>Frequency:</strong> 47–63 Hz</li></ul><h5><strong>Physical Specifications</strong></h5><ul><li><strong>Dimensions (D × W × H):</strong> 57 × 63.5 × 69 cm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific EXTREVA ASE Accelerated Solvent Extractor

Achieve true walkaway sample-to-vial sample preparation with the Thermo Scientific™ EXTREVA™ ASE™ Accelerated Solvent Extractor. 

<p><strong>Achieve true walkaway sample-to-vial sample preparation with the Thermo Scientific™ EXTREVA™ ASE™ Accelerated Solvent Extractor. Without any intervention, perform sample extraction, in-cell cleanup and evaporation—all in one seamless operation—reducing manual labor from hours to minutes and enabling you to focus on other lab priorities while using up to 50% less solvent than other sample preparation techniques.</strong></p><p><strong>Accelerate your journey from sample to vial</strong></p><h5><strong>The EXTREVA ASE Accelerated Solvent Extractor offers:</strong></h5><ul><li><strong>All-in-one sample preparation.</strong> The EXTREVA ASE system automatically extracts and concentrates samples, eliminating the need to manually move sample extracts to another device for solvent evaporation.</li><li><strong>A walk-away solution. </strong>The system minimizes hands-on sample preparation tasks, enabling staff to accomplish other tasks.</li><li><strong>Parallel extraction. </strong>One EXTREVA ASE system can perform four parallel sample extractions, substantially increasing throughput.</li><li><strong>Gas-assisted extraction. </strong>The dynamic gas-assisted extraction mode reduces solvent consumption to between 5 and 100 milliliters per sample in most cases.</li><li><strong>Automation. </strong>Full automation improves recoveries and reproducibility while reducing training needs. Unlike humans, automated systems are ideal for performing the same tedious task repeatedly, and they don’t make mistakes.</li><li><strong>Method flexibility and optimization</strong>. Up to six different solvents can be used, including wash solvents for cleaning between methods. Precise flow control optimizes methods.</li><li><strong>Barcode-reading.</strong> The system tracks sample information and preparation parameters using a 2-D bar code reader to facilitate tracking and integrity. Data is recorded on the instrument or Thermo Scientific™ <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Chromeleon™ Chromatography Data System (CDS) software</strong></a>.</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Instrument Type:</strong> Automated Sample Preparation System</li><li><strong>Application:</strong> Simultaneous sample extraction and concentration</li><li><strong>Model Description:</strong> EXTREVA ASE Extraction and Evaporation System</li></ul><h5><strong>Performance &amp; Capabilities</strong></h5><ul><li><strong>Extraction Temperature Range:</strong> 40–200 °C</li><li><strong>Evaporation Temperature Range:</strong> 40–100 °C</li><li><strong>Compatible Solvents:</strong> Wide range of organic and aqueous solvents</li><li><strong>Pressure Capability:</strong> Up to 200 psi</li><li><strong>Power Consumption:</strong> 2000 W</li><li><strong>Frequency:</strong> 50/60 Hz</li></ul><h5><strong>Sample &amp; Solvent Handling</strong></h5><ul><li><strong>Extraction Cells (stainless steel):</strong> 1, 5, 10, 22, 34, 66, 100 mL</li><li><strong>Extraction Cell Tray:</strong> 16-position with 1 rinse</li><li><strong>Collection Vials:</strong><ul><li>60 mL and 100 mL evaporation vials</li><li>250 mL evaporation bottles</li><li>Direct concentrate to 2 mL sample vials with rinse capability</li></ul></li><li><strong>Collection Vial Tray:</strong> 16-position tray insert for 60 mL vials and 250 mL bottles; includes 4 rinse positions</li></ul><h5><strong>Utilities &amp; Requirements</strong></h5><ul><li><strong>Pneumatic Requirements:</strong><ul><li>Air: 130–140 psi</li><li>Nitrogen: 350–450 psi</li></ul></li></ul><h5><strong>Physical Specifications</strong></h5><ul><li><strong>Dimensions (D × W × H):</strong> 65.2 × 100 × 88.6 cm (25.6 × 39.4 × 34.8 in.)</li><li><strong>Weight:</strong> 160 kg (353 lb)</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor

Save time, reduce solvent consumption, and boost productivity with Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor.

<div><p><strong>Automate extraction, filtration and clean up of compounds from solid and semisolid samples in minutes using the automated Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor. This system accommodates sample sizes of 1-100g, allows unattended extraction of up to 24 samples and uses 50 to 90% less solvent compared to other methods.&nbsp;</strong></p><p>The chemically inert pathway supports acid and alkaline sample matrices and solvents. Flexible, easy-to-operate and cost-effective, the Dionex ASE 350 is ideally suited for high-throughput laboratories and for a wide variety of applications.</p><div><h4><strong>Rapid and efficient extractions</strong></h4><ul><li>Elevated temperature (up to 200°C) and pressure (1500psi) reduce extraction times and solvent consumption</li><li>Fast pump (70mL/min.) enables fast extractions (typically 12-20 minutes)</li><li>Specialized oven design ensures precise temperature control for excellent reproducibility</li><li>Integrated solvent controller allows mixing and delivery of up to three solvents</li><li>The <strong>Thermo Scientific™ SmartRun™ System</strong> ensures cell size and collection vessel size are matched for an optimal extraction</li></ul><h4><strong>Enhanced flexibility to support multiple applications</strong></h4><ul><li>System accommodates <strong>1, 5, 10, 22, 34, 66 </strong>and <strong>100mL cell sizes</strong></li><li>pH-hardened pathway with <strong>Thermo Scientific™ Dionium™ components and cell</strong> enables compatibility with acid or alkaline pretreated matrices</li></ul><h4><strong>Dramatically reduced solvent consumption</strong></h4><ul><li>Requires less than 50mL solvent for a 20g sample</li><li>Includes solvent saver mode for further solvent savings</li></ul><h4><strong>Enhanced laboratory productivity</strong></h4><ul><li>System holds up to 24 samples for unattended operation</li><li>Flow-through technology allows in-line filtration and in-cell cleanup</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Dionex_ASE_350_system_2_9426ff3f9a/Thermo-Scientific-Dionex-ASE-350-system_2.jpg" alt="Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Dionex_ASE_350_system_2_9426ff3f9a/thumbnail_Thermo-Scientific-Dionex-ASE-350-system_2.jpg 114w," sizes="100vw" width="579" height="792"></p><h3><strong>🛠️ Specifications</strong></h3><ul><li><strong>Collection Vial Tray</strong>: 26-position tray insert for 60 mL vials; 19-position tray insert for 250 mL bottles</li><li><strong>Depth (English)</strong>: 27.3 in.</li><li><strong>Depth (Metric)</strong>: 69.3 cm</li><li><strong>Description</strong>: Extractor Only</li><li><strong>Extraction Fluids</strong>: Compatible with a wide range of organic and aqueous solvents</li><li><strong>Fluid Sensors</strong>: IR</li><li><strong>Frequency</strong>: 50/60 Hz</li><li><strong>Height (English)</strong>: 24.3 in.</li><li><strong>Height (Metric)</strong>: 61.7 cm</li><li><strong>Pneumatic Requirements</strong>: Air at 400–827 kPa (60–120 psi); N2 (at 1034 ×–1340 kPa (150–200 psi))</li><li><strong>Power Consumption</strong>: 500 Max VA</li><li><strong>Pressure</strong>: 10 MPa (1500 psi)</li><li><strong>Pump Flow</strong>: 70 mL/min</li><li><strong>Temperature Control</strong>: Up to 200 °C</li><li><strong>Weight (English)</strong>: 140 lb.</li><li><strong>Weight (Metric)</strong>: 65 kg</li><li><strong>Width (English)</strong>: 26.5 in.</li><li><strong>Width (Metric)</strong>: 67.3 cm</li><li><strong>Collection Vials</strong>: 60, 250 mL</li><li><strong>Dimensions (D x W x H)</strong>: 69.3 x 67.3 x 61.7 cm</li><li><strong>Extraction Cell Tray</strong>: 24 Cell, 2 Rinse</li><li><strong>Extraction Cells</strong>: 1, 5, 10, 22, 34, 66, 100 mL</li><li><strong>For Use With (Equipment)</strong>: Dionex ASE 350</li><li><strong>Type</strong>: Dionex ASE 350 System</li><li><strong>Unit Size</strong>: Each</li></ul></div></div>

Products from category Sample preparation automation focused on Sample Preparation - page 3

Related content

RI Calibration in NIST26 Chromatogram and Applying to Calculating RI in Samples

Interlaboratory comparisons other than proficiency testing

Confident Identification of Battery Solvent Impurities Using Complementary GC-MS Techniques