Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 18th August 2025? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you poster by Agilent Technologies / ASMS and application note by Shimadzu!<h3>1. Agilent Technologies / ASMS: New Pollutant Screening of Environmental Samples Using High-Resolution GC/Q-TOF and Accurate Mass Spectral Library of Emerging Environmental Pollutants&nbsp;</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/ps_7250_pdcl_library_pal3_suremass_asms_2025_thp_083_en_agilent_3f1ac53d50.pdf">Full PDF for download</a></li></ul>This paper conducts qualitative and semi - quantitative analysis of complex GC/Q-TOF sample data by using high-resolution, accurate-mass gas chromatography/quadrupole time-of-flight mass spectrometry (GC/Q-TOF), an accurate mass spectral library of environmental pollutants specifically created for emerging pollutant screening, and analytical software with a screening process platform. Actual environmental water samples are used to verify the sensitivity, accuracy, and spiked recovery rate of the solution. All results confirm that this solution is simple, stable, and effective, providing technical support for emerging pollutant screening.<h4>Experimental</h4><h5>Instrument Analysis&nbsp;</h5>The samples were analyzed by <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8890+GC">Agilent 8890 GC</a> and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=7250+GC%2FQ-TOF">7250 high resolution accurate mass GC/Q-TOF system</a>, It was configurated with a mid-column backflush setup (Figure 1). A 55.5 - min retention time locked GC oven temperature program is utilized which is listed in Table 1. The key mass spectrometry parameters of the GC/Q-TOF are as follows: It operates in the Electron Ionization (EI) mode with an energy of 70 electron volts, conducts detection in the time-of-flight scan mode within a mass-to-charge ratio range of 50 - 1000. The spectral acquisition rate is 5 Hz, and both the interface temperature and the source temperature are set at 280 °C. Data analysis is performed with the assistance of MassHunter data analysis software. The high-resolution accurate mass spectral library employed in the screening process is independently created by the laboratory.<h5>Data Analysis&nbsp;</h5><ul><li>The data processing used Agilent <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=Masshunter+software">Masshunter data analysis software</a>, including Suremass.&nbsp;</li><li>The target screening of new pollutants was based on an independently created by the laboratory GC/Q-TOF PCDL library1.</li></ul><h4>Conclusions&nbsp;</h4><ul><li>Based on the currently collected list of new pollutants, a truly meaningful new pollutant PCDL high-resolution spectral library has been created.&nbsp;</li><li>This work demonstrated a total workflow for targeted screening and semi-quantification in real water sample.&nbsp;</li><li>The confidence in identification of new pollutants was enhanced by stable RT and excellent mass accuracy as a result of using an RTL backflush method and highresolution accurate mass measurement.</li></ul><h3>2. Shimadzu: Analysis of SAF Using Comprehensive Two- Dimensional Gas Chromatography (GC× GC)&nbsp;</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00862_en_f1ee0a435f.pdf">Full PDF for download</a></li></ul><h4>User Benefits</h4><ul><li>By comparing chromatograms obtained as two-dimensional images, it can be utilized for quality control Inspection of SAF.</li><li>Changing the column combination customizes separation characteristics to the sample composition.</li><li>Utilizing the FASST (Fast Automated Scan/SIM Type) allows for the simultaneous analysis of the composition of SAF and the quantitative analysis of antioxidants.</li></ul>SAF (Sustainable Aviation Fuel) produced from waste cooking oil, used paper, and sugarcane has gained attention in recent years from the perspective of achieving a carbon neutral society. The physical properties of SAF,such as combustibility, vary depending on its components. Therefore, component analysis of SAF is crucial; however, since SAF is a mixture of various hydrocarbons, complete separation of each component is extremely challenging. Comprehensive two-dimensional gas chromatography (GC×GC), which utilizes the separation characteristics of two different types of columns, is an effective method for analyzing SAF with such a complex composition. Additionally, the GCMS-QP2050 enables ultra-fast scanning (30,000 u/sec), which improves the separation of adjacent peaks and allows for high-precision qualitative analysis(Application News No.01-00788-EN).In this application, two types of SAF (A and B) and one intermediate product from the SAF production process (C) were measured using a combination of GC×GC with a non-polar column as the first column and a medium-polarity column as the second column. The two-dimensional images allow for a visual representation of the composition distribution, making quality control Inspection. Moreover, high separation of paraffins and naphthenes using a combination of a medium-polar column as the first column and a non-polar column asthe second column, as well as the quantification of antioxidants in SAF, which are regulated by concentration in ASTM D2425 will be introduced.<h5>System Configuration</h5><ul><li>GC Model: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexis%E2%84%A2+GC-2030">Nexis GC-2030</a> / <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=AOC-30i">AOC-30i</a></li><li>MS Model: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-QP2050">GCMS-QP2050</a> (TMP exhaust: 255 L/sec)</li><li>Injection Port: SPL</li><li>Modulator: ZX1 thermal modulator (ZOEX corp.)</li><li>Nitrogen generator: MT-24F (System Instruments Co., Ltd.)</li><li>Software:<ul><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Labsolutions+GCMS">LabsolutionsTM GCMS</a></li><li>GC Image (GC Image, LLC)</li></ul></li><li>Library: NIST Mass Spectral Library</li></ul><h4>Conclusion</h4>Three SAF samples were measured using a combination of lowpolar to medium polar columns and compared the twodimensional images. The two-dimensional images allow for intuitive comprehension of the distribution of each component, making it easy to identify differences in composition and conducting quality control Inspection. Additionally, in the measurement of SAF using a combination of medium-polar to non-polar columns, the separation of paraffins and naphthenes was improved. Furthermore, by utilizing the FASST, composition analysis of SAF and quantitative analysis of antioxidants were simultaneously performed, which are regulated by concentration in ASTM D2425.

News from LabRulezGCMS Library - Week 34, 2025

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 20th October 2025? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you applicaton notes by Agilent Technologies, EST Analytical, Shimadzu and Thermo Fisher Scientific!<h3>1. Agilent Technologies: FAMEs Analysis of Oils by GC-FID Coupled with Fully Automated Sample Preparation using a PAL3 Series 2 RTC</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_fame_oil_gc_pal3_5994_8543en_agilent_418da94d17.pdf">Full PDF for download</a></li></ul>The analysis of fatty acid methyl esters (FAMEs) is a widely used technique for characterizing lipid profiles in various food products, including oils, meats, and seeds. Fats are composed of a complex mixture of saturated, monounsaturated, and polyunsaturated fatty acids, each with varying carbon chain lengths.2 This type of analysis is routinely performed in governmental, quality control (QC), and contract research laboratories worldwide. The resulting data often informs product labeling. Among the analytical techniques available, gas chromatography (GC) with flame ionization detection (GC-FID) is one of the most common methods for determining fatty acid composition in&nbsp;foods.&nbsp;This application note describes the use of automated sample preparation and analysis of FAMEs using the PAL3 Series&nbsp;2 RTC Autosampler system coupled with Agilent 8890 GC system equipped with an FID. The results shown here focus on two different methods of derivatization for FAMEs extraction: (1) base catalyzed reactions using potassium hydroxide (KOH) (part&nbsp;number M5795-14000) and (2) base plus acid catalyzed reactions using boron trifluoride (BF3 ) 1 (part number M5795-14001). For ease of use, both processes have been transcribed into dedicated sample preparation methods. These methods are part of the Agilent automated sample preparation workflow suite of solutions. These workflows improve process safety, optimizes throughput, and minimizes&nbsp;errors.<h4>Experimental&nbsp;</h4>The 37 component FAME mix standard was purchased from Sigma-Aldrich (part number CRM47885), and three consumer oil products were purchased from a local grocery store. The samples were prepared and injected into the GC using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=PAL3">PAL3 Series 2-RTC system</a>. The analysis was performed using an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8890+GC">8890 GC</a> equipped with an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=DB%E2%80%91FastFAME">Agilent DB‑FastFAME GC column</a>, 30&nbsp;m × 250 µm, 0.25&nbsp;µm, (part number G3903‑63011) and configured with an FID using Agilent&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=OpenLab+CDS+v2.7">OpenLab CDS v2.7+</a>.<h4>Conclusion&nbsp;</h4>In summary, the current study demonstrated excellent reproducibility and accuracy using automated sample preparation and analysis of FAMEs. Two different sample preparation methods were demonstrated, both delivering comparable and reliable results. The base-catalyzed method enables rapid analysis but is not suitable for samples containing free fatty acids. In contrast, the acid-catalyzed method, while more extensive, is compatible with a broader range of lipid classes, including free fatty acids, phosphoglycerides, and triglycerides. The Agilent automated sample preparation workflow suite of solutions deliver a comprehensive package by combining preconfigured hardware, optimized analytical methods, and the necessary consumables to ensure efficient and reliable results.<h3>2. EST Analytical: Unregulated Contaminant Monitoring Rule 3 for USEPA Method 524.3 and 524.4</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Purge_and_Trap_Unregulated_Contaminant_Monitoring_Rule_3_for_USEPA_Method_524_3_and_524_4_b774e6ab4c.pdf">Full PDF for download</a></li></ul>The third Unregulated Contaminant Monitoring Rule (UCMR 3) was finalized in April of 2012. UCMR 3 requires public water systems to monitor for a specific list of 30 contaminants under three separate lists: list one, assessment monitoring, list two, screening survey, and list three, pre-screen testing. This application note will address the volatile organic compounds found in list one, assessment monitoring contaminants. USEPA Method 524.3 and 524.4 will be the methods evaluated for sampling and analysis.<h4>Discussion&nbsp;</h4>The amendments to the Safe Drinking Water Act (SDWA) require the EPA to list no more than 30 unregulated contaminants to be monitored by public water systems. Every five years, this list needs to be updated. List one contaminants include seven volatile organic compounds to be analyzed by USEPA Method 524.3. The detection limits for these compounds are much lower; therefore, Single Ion Monitoring (SIM) must be used for compound detection. USEPA Method 524.3 and 524.4 allow for modification of purge and trap parameters in order to take advantage of purge and trap improvements. Thus, method parameters can be modified in order to optimize purge and trap cycle times. Since the purge and trap parameters were established for these methods previously, refer to application note Drinking Water Analysis Conditions for USEPA Method 524.3 and the Newly Proposed Method 524.4, purge and trap method development was not required for this application. For this study, Helium and Nitrogen purge gases were compared utilizing the same purge volume then comparing experimental results for the linearity, precision, accuracy and overall compound response for the low level requirements set by UCMR 3.&nbsp;<h4>Experimental&nbsp;</h4>The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2160">EST Analytical Encon Evolution purge and trap concentrator</a> and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2159">Centurion WS autosampler </a>were interfaced to an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=7890%2F5975">Agilent 7890/5975 GC/MS</a>. The purge and trap concentrator was configured with a Vocarb 3000 (K) analytical trap. A chiller unit capable of keeping the sample vials cooled below 10°C was installed on the Centurion WS autosampler. The experimental parameters are listed in Tables 1 and 2.<h4>Conclusion</h4>The Encon Evolution and Centurion WS in conjunction with the Agilent 7890/5975 GC/MS performed very well using both the Helium and Nitrogen purge gases and employing SIM for compound detection. The Nitrogen and the Helium purge gases met USEPA Method 524.3 curve linearity criteria and produced comparable results for precision and accuracy at the low and mid-levels of the calibration curve. Overall, the principal difference between the two purge gases was exhibited in the compound response. When examining the overall compound response factors over the curve range, it is evident that the analytes’ responses are slightly lower with the Nitrogen purge gas as opposed to the Helium purge gas.<h3>3. Shimadzu: Comparison of Metabolites in Rice from Different Production Areas Using GC-MS/MS</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01000_en_9c1d7cfe70.pdf">Full PDF for download</a></li></ul>Metabolomics is a research method for comprehensively analyzing metabolites contained in an organism. It is used for a wide variety of fields, such as medical science and food. Because food quality is affected by many components complexly, comprehensive analysis of metabolites can help improve food development and manufacturing processes. Rice contains metabolites, such as sugars, amino acids, and fatty acids. In recent years, development of more flavorful rice has been studied.&nbsp;This article describes simultaneous analysis of 502 metabolites and multivariate analysis of a variety of rice from different production areas. The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-TQ8040+NX">GCMS-TQ8040 NX</a> with the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Smart+Metabolites+Database+ver.+2">Smart Metabolites Database Ver. 2</a> was used for measurement. <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=LabSolutions+Insight">LabSolutions Insight </a>was used for data processing, and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=eMSTAT+Solution">eMSTAT Solution</a> was used for multivariate analysis. The process flow, from pretreatment to data analysis, is shown in Fig. 1.<h4>eMSTAT Solution&nbsp;</h4>eMSTAT Solution is statistical analysis software that enables multivariate and discriminant analysis of chromatogram data. For multivariate analysis, it can discriminate between samples, and it can search for the marker peaks that contribute to those differences. For discriminant analysis, it can create a discriminant model based on training data and use the model for discriminant analysis. Users can easily switch both modes with just a single click. Workflow of the data analysis is shown in Fig. 2.<h4>Conclusion&nbsp;</h4>Metabolites in same variety of rice from different production areas were analyzed, and the differences between samples were identified by multivariate analysis. Score plots were used to visualize differences between the samples, and loading plots were used to confirm the characteristic compounds. Smart Metabolites Database Ver. 2, LabSolutions Insight, and eMSTAT Solution make metabolites analysis, data processing, and multivariate analysis easy for beginner users.<h3>4. Thermo Fisher Scientific: Automated, multi-parameter gasoline characterization using GC-VUV and ASTM D8071</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_003957_gc_vuv_trace_1610_vga_industrial_an003957_na_en_3c0a64e3b2.pdf">Full PDF for download</a></li></ul>Gasoline is a complex hydrocarbon blend whose composition directly impacts combustion behavior, emissions, and regulatory compliance. Accurately quantifying components such as aromatics, olefins, ethanol, and benzene is critical, but traditional ASTM methods require multiple techniques (FIA, GC-FID, GC-MS, etc.) to measure all relevant parameters. Table 1 summarizes several test methods and their respective scopes.&nbsp;ASTM D8071 introduces a consolidated method using GC-VUV, offering improved precision, spectral resolution, and reduced operational burden. This approach is now recognized as an EPA- and CARB-approved alternative to several legacy test methods, including ASTM D1319, D5599, D5769, and D3606.<h4>Experimental&nbsp;</h4>Gasoline samples were analyzed on the VUV Analyzer Platform for Fuels with no sample preparation required. The VUV Analyzer consists of the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/486">Thermo Scientific™ TRACE™ 1610 gas chromatograph</a> coupled to the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=3&amp;search=VGA-100">VGA-100™ spectrometer detector </a>(VUV Analytics, Inc.).&nbsp;Data are acquired and processed with the VUVision™ Software and VUV Analyze™ Software (VUV Analytics, Inc), respectively, specifically configured to run ASTM D8071.&nbsp;<h5>Workflow overview&nbsp;</h5>The VUV Analyzer Platform for Fuels performs gasoline PIONA class analysis using a streamlined five-step workflow:&nbsp;<ol><li>System validation – Verifies instrument performance using standard hydrocarbons.&nbsp;</li><li>Sample prep – No preparation required.&nbsp;</li><li>Data acquisition – Performed using VUVision Software.&nbsp;</li><li>Spectral matching – Automated deconvolution with VUV Analyze Software.&nbsp;</li><li>Quantitation – Volume % and mass % calculated with high accuracy using built-in response factors and density data.</li></ol><h4>Conclusion&nbsp;</h4>GC-VUV with ASTM D8071 enables complete hydrocarbon group and compound-level analysis of gasoline in a single method. Its ability to automate spectral deconvolution and report mass and volume percentages simplifies operations while meeting strict compliance standards. This solution not only enhances analytical accuracy and repeatability but also drastically reduces operating costs and lab complexity.&nbsp;<ul><li>Short analysis time with full gasoline class and compound profiling in 34 minutes&nbsp;</li><li>Faster throughput with full automation from injection to reporting&nbsp;</li><li>12× lower cost-per-analysis, due to reduced labor, no calibration standards, and consolidated workflow</li></ul>

News from LabRulezGCMS Library - Week 43, 2025

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 8th December 2025? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies and Thermo Fisher Scientific and other document by Shimadzu!<h3>1. Agilent Technologies: High-Precision Determination of Four Greenhouse Gases in the Atmosphere Using the Agilent 8890 GC</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_monitoring_greenhouse_gas_8890_gc_5994_8744en_agilent_0e08f0909f.pdf">Full PDF for download</a></li></ul>Currently, China is actively implementing dual-control measures on total energy consumption and intensity. The Ministry of Ecology and Environment issued "The 14th Five-Year Plan for Ecological and Environmental Monitoring", which specifically highlights the advancement of technologies for direct measurement of carbon emissions. It calls for organizing pilot projects in multiple key industries and enterprises to monitor greenhouse gas emissions such as carbon dioxide and methane, establishing greenhouse gas monitoring networks in key cities, and upgrading the greenhouse gas monitoring capabilities of national atmospheric background stations. As a result, conducting greenhouse gas monitoring within the environmental protection stations of provinces and cities has become a critical task.The use of GC for detecting greenhouse gases has a long history. The conventional methods used gas sampling valve for injection, TCD and FID for sequential detection of CO2 and CH4 , or combining a methanizer with an FID to detect CO2 and CH4 in one analytical channel and detecting N2O on ECD in another analytical channel.2 The analytical precision for CO2, CH4, and N2 O achieved with such configurations typically ranges from 0.2% to 0.5%, but it is difficult to obtain precision better than 0.1%, which does not meet the current requirements for greenhouse gas monitoring accuracy and precision. Moreover, the traditional methods rarely report analytical precision for SF6 at ppt concentration levels. To monitor trace levels of CO2 , CH4, N2O, and ultratrace levels of SF6 on the same GC system with high-precision results, it is necessary to optimize multiple factors included in sample injection, separation, and detection. Furthermore, the system configuration must be flexible enough to allow expansion for future analytical needs, such as incorporating trace CO analysis in air. This work demonstrates how the 8890&nbsp;GC achieves high-precision analysis of four key greenhouse gases by optimizing the injection volume, controlling injection reproducibility, and utilizing multichannel separation and high-sensitivity detectors to ensure the system runs stably in long‑term operation.<h4>Experimental</h4><h5>Instrumental&nbsp;</h5>The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=8890+GC">8890 GC</a> is configured as a three-channel/multivalve/multicolumn system, enabling independent analysis of four greenhouse gases—CH4 , CO2 , N2O, and SF6 —within 8 minutes using a single injection. The target compounds are analyzed in separate channels, reducing chromatographic peak broadening and thereby improving sensitivity and&nbsp;repeatability.&nbsp;<ul><li>For CO2 analysis, a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=1&amp;search=methanizer">methanizer</a> is used to convert CO2 to CH4 , which is then detected by FID. The system eliminates the need for dehydration through backflushing and venting operation via switching valves, preventing interference from moisture and oxygen in the air and extending the lifespan of the methanizer.&nbsp;</li><li>For N2O and SF6 analysis, the ECD with hidden anode design is used for high‑sensitivity detection and strong anti‑contaminant capability.&nbsp;</li><li>The CH4 analysis is conducted on a single column with a dedicated large injection loop, significantly enhancing detection sensitivity and repeatability, achieving a detection limit for methane as low as single-digit ppb levels.</li></ul><h4>Conclusion&nbsp;</h4>Based on its exceptional pneumatic control and valve-based flow path design, the multivalve/multicolumn Agilent 8890 GC system achieves high-sensitivity and high-precision measurements of four key greenhouse gases. This is accomplished through optimized and precise control of sample flow rate/volume, selection of premium analytical columns, and the use of highly stable and robust FID and ECD. Standard gas samples of CO2 , CH4 , N2 O, and SF6 , with concentrations equivalent to atmospheric levels, were measured continuously 10 times. The measurement precision for these gases was better than 0.05%, 0.1%, 0.1%, and 0.5%, respectively, fully meeting the high-precision monitoring requirements of environmental monitoring stations at various levels for target greenhouse gases. Compared to other monitoring solutions, this approach is based on a stable and reliable gas chromatography platform that is technically easier to master and deploy. It represents a trusted solution developed by Agilent to assist in establishing a greenhouse gas monitoring network in China.<h3>2. Shimadzu: GC/MS Mass Spectra Library - Polymer Additives Library Ver.2</h3><ul><li>Other document</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/c146_e506_d4c93c4d60.pdf">Full PDF for download</a></li></ul><h4>Contains Approximately 5,800 Mass Spectra&nbsp;</h4>This library consists of a library*, which contains 5,775 mass spectra for 590 types of polymer additives and GC/MS pyrolysates from the pyrolysis GC/MS analysis of additives, and a library containing the mass spectra for 65 compounds often targeted for analysis, selected based on their usage in the commercial market, and chemical substance regulatory information. In total, this product contains 5,840 mass spectra, which provides strong support for the analysis of polymer additives. In Ver.2, the compound registration has been newly enhanced, for example vulcanizing accelerators utilized in the rubber filed. Approximately 1,000 spectra have been added.&nbsp;*ADD-MS22B F-Search Additives Library from Frontier Laboratories<h4>Can Be Used with a Variety of GC/MS Systems&nbsp;</h4>The library can be used for a variety of GC/MS applications, including pyrolysis GC/MS, which is widely used for the analysis of additives in polymer materials, and liquid sample injection GC/MS. It supports a wide range of additive analysis for customers.<h4>Library Specifications</h4><ul><li>Registered compounds: 5,775+65&nbsp;</li><li>Registered information: Mass spectrum, retention index for each analytical condition, compound name, molecular weight, compositional formula, structural formula, classification of additives</li><li>Applicable models: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=3&amp;search=GCMS-QP2050">GCMS-QP™ serie</a>s, <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=3&amp;search=GCMS-TQ8050">GCMS-TQ™ series</a> (This library does not include MS/MS spectra.)&nbsp;</li><li>Pyrolyzer (Pyrolysis analysis system): <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=43&amp;search=PY-2020D">PY-2020D</a>, <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=43&amp;search=PY-2020iD">PY-2020iD</a>, and <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=43&amp;search=EGA%2FPY-3030D">EGA/PY-3030D</a></li><li>Workstations: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=3&amp;search=GCMSsolution">GCMSsolution</a>™ Ver. 4.6 and later, <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=3&amp;search=LabSolutions+GCMS">LabSolutions™ GCMS</a>™ Ver. 5.131 and later, LabSolutions DB/CS GCMS Ver. 6.131 and later</li></ul><h3>3. Thermo Fisher Scientific: Trace analysis of epichlorohydrin in drinking water using GC-MS coupled with purge and trap</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_003894_gc_single_quad_isq_7610_environmental_an003894_na_en_70123385ae.pdf">Full PDF for download</a></li></ul>Epichlorohydrin (ECH) is a versatile starting material in the production of drugs and polymers and is also used as an insect fumigant and solvent for organic synthesis reactions. ECH-based polymer pipes are commonly used in the production of drinking water due to their durability and resistance to corrosion. However, ECH is known for its high reactivity and toxicity, which poses significant health risks if it contaminates drinking water. Exposure to ECH can cause respiratory issues, skin irritation, and has been classified as a probable human carcinogen.1Due to these risks, many countries have imposed strict limits on the amount of ECH allowed in drinking water. Recently, Europe set a minimum detection limit (MDL) of 30 parts per trillion (ppt) for ECH in drinking water.2 Whereas typically required detection limits for most compounds mandated for analysis in Europe can be achieved using methods based on static headspace, the stringent MDL required for ECH requires preconcentration, for example using purge and trap (P&amp;T) technology.3,4 This technology involves purging the water sample with an inert gas to release volatile organic compounds (VOCs), which are then trapped and concentrated for analysis, ensuring reliable detection at very low concentrations. In the United States, the analysis of VOCs in drinking water is mandated by the Environmental Protection Agency (EPA). The EPA requires the use of P&amp;T technology for drinking water analysis to ensure that even trace amounts of harmful compounds like ECH are detected and managed appropriately.&nbsp;The following evaluation describes the use of the ISQ 7610 Single Quadrupole MS system coupled with the Thermo Scientific™ TRACE™ 1610 GC with the Thermo Scientific™ HeSaver-H2 Safer™ split/splitless injector and Teledyne LABS Tekmar Lumin P&amp;T concentrator combined with the AQUATek LVA autosampler for the analysis of ECH in drinking water.<h4>Experimental</h4><h5>GC-MS parameters&nbsp;</h5>A <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/486">TRACE 1610 GC</a> was coupled to the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/484">ISQ 7610 MS</a> equipped with the Thermo Scientific™ NeverVent ™ vacuum probe interlock (VPI) and an ExtractaBrite ion source. A <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1773">Thermo Scientific™ TraceGOLD™ TG-VMS column</a>, 30 m × 0.25 mm, 1.4 µm film (P/N 26080-3320) was used for compound separation. The HeSaver-H2 Safer SSL injector was utilized to reduce the carrier gas consumption by decoupling the gas used for the chromatographic separation from the gas used to pressurize the inlet and maintain split and purge flows. The critical separations were maintained with a run time of under 15 minutes.For this analysis, the ISQ 7610 MS was operated in Selected Ion Monitoring (SIM) mode for increased selectivity, as required for this application. Extended method parameters for the ISQ 7610 MS are shown in Table 2.<h5>Instrument control and data processing&nbsp;</h5>Data was acquired, processed, and reported using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/76">Thermo Scientific™ Chromeleon™ Chromatography Data System (CDS)</a>. This software can control both the GC-MS system and the Tekmar Lumin P&amp;T with the AQUATek LVA. This allows a single software to be utilized for the full workflow, simplifying the instrument operation. This application note is available for download via the Thermo Scientific™ AppsLab Library, which contains all the parameters needed to acquire, process, and report the analytical data for analysis of ECH.5<h4>Conclusion&nbsp;</h4>This study demonstrates the capability of the Tekmar Lumin P&amp;T with the AQUATek LVA system connected to the ISQ 7610 Single Quadrupole GC-MS to detect and quantify low-level ECH in drinking water samples, in compliance with EPA requirements.&nbsp;<ul><li>Utilizing the Tekmar Lumin P&amp;T’s ability to purge with nitrogen, along with using the HeSaver-H₂Safer SSL injector, nearly four times less helium was consumed during the analysis without sacrificing system performance.&nbsp;</li><li>The linearity of the calibration curve from 30 ppt to 5,000 ppt passed method requirements.</li><li>The application proved robust during an extended study with 20 samples of a 1,000 ppt ECH standard injected over a series of 124 injections, obtaining 4.4% precision and 118% accuracy of the recovery.</li></ul>

News from LabRulezGCMS Library - Week 50, 2025

Enhancing the targeted and untargeted analysis of honey by vacuum-assisted SPME-GC × GC-MS. A green, practical, and highly informative approach

Article

Product

Events

Webinars

Application

Academy

Video

Poster

Scientists

Plastics

Environment

Food

Water

Health

Presentation

Scientific article

Interview

Toxicology

Popularization

Science and research

Software

Covid-19

Career

Laboratories

Various

Zaměření

Type of News

Focus

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Pittcon 2026

36th MassSpec Forum Vienna 2026

US HUPO 2026

The science of next-gen ingredients: fermentation, formulation and function

The Data Driven Plant; How AI Transforms Chemical Manufacturing

Process Raman: A Reliable and Versatile Tool For Downstream Process Monitoring and Control For mAB Production