Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 18th May 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application note by Shimadzu, poster by MDCW / InfoMass and brochure by Thermo Fisher Scientific!<h3>1. MDCW / InfoMass: Development of a Fully Software-Controlled, Alignment-Free Loop-Delay Thermal Modulator for GC×GC</h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/P_22_Wu_0662310ba1.pdf">Full PDF for download</a></li></ul><section><div><div><div><div><div><div>Loop-delay thermal modulation is a well-established approach for comprehensive two-dimensional gas chromatography (GC×GC) and inherently requires precise alignment of the modulation loop. In conventional designs, this alignment must be performed manually by the user, a process that is difficult, time-consuming, and often unreliable, as the modulation loop can shift during operation due to repeated hot-jet gas pulses, leading to misalignment and degraded modulation performance. This work addresses these limitations through a redesigned loop-delay modulator in which precise alignment is ensured intrinsically by the modulator geometry, eliminating user-dependent alignment while improving mechanical stability and operational robustness.&nbsp;<h4>Key Improvements &nbsp;</h4><ul><li>Intrinsic loop alignment by geometry, eliminating user-performed alignment&nbsp;</li><li>Mechanically secured loop holder, preventing loop movement during hot-jet gas pulses &nbsp;</li><li>Easy loop winding, simplifying installation and replacement&nbsp;</li><li>No moving mechanical parts, improving robustness and reliability&nbsp;</li><li>Fully software-controlled modulation, including hot-jet temperature, valve timing, modulation period, and cold-jet gas flow&nbsp;</li><li>Programmable cold-jet gas flow, providing indirect control of modulation temperature&nbsp;</li><li>Programmable modulation period, enabling flexible optimization for correcting peak wrap-around.&nbsp;</li><li>Independent of GC controls, enabling standalone operation</li></ul><h4>Installation and Compatibility&nbsp;</h4>Precise loop alignment is automatically achieved through the modulator’s mechanical design. The loop remains fixed during operation and is not affected by hot-jet gas pulses. The compact, modular system is compatible with most commercial gas chromatographs and operates independently of GC control hardware and software<h3>2. Shimadzu: Simultaneous Analysis of Methoxypyrazines in Processed Tomato Products by GC–MS/MS with SPME Arrow</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01141_en_78979e911f.pdf">Full PDF for download</a></li></ul><h5>User Benefits</h5><ul><li>SPME Arrow enables high-sensitivity determination of methoxypyrazines in processed tomato products by efficiently preconcentrating volatile compounds.</li><li>GC–MS/MS in MRM mode provides isomer selectivity and reliable quantitation of methoxypyrazines, even in complex sample matrices.</li><li>The AOC-6000 Plus multifunctional autosampler automates SPME Arrow injection to increase throughput and improve repeatability.</li></ul>In processed vegetable foods and beverages, small changes in aroma and flavor can strongly affect perceived quality. For processed tomato products in particular, a vegetative (green) or hay-like off-flavor is often a key concern. This off-flavor has been linked to methoxypyrazines present at very low levels (ppt levels around 10 ng/L).&nbsp;Methoxypyrazines include many closely related analogs. Therefore, a robust quantitative method must deliver both high sensitivity and sufficient selectivity (and/or separation) to handle real matrices.&nbsp;In this article, five methoxypyrazines previously detected in vegetables (Table 1) were analyzed using a GC-MS/MS system with the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=SPME+Arrow">SPME Arrow</a> injection method. The method provides stable quantitation at ng/L (ppt) levels, even in complex, interference-rich samples.<h4>System Configuration</h4>All measurements were performed with a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-TQ8040+NX">GCMS-TQ8040 NX triple quadrupole</a> GC–MS/MS system equipped with an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=AOC6000+Plus">AOC6000 Plus</a> multifunctional autosampler (Fig. 1).&nbsp;The AOC-6000 Plus supports multiple sample introduction techniques—including liquid injection, headspace, and SPME— and can switch between them automatically based on the method. This flexibility makes it well suited for laboratories that handle many sample types and applications.<h4>Conclusion</h4>By using an AOC-6000 Plus autosampler with the GCMS-TQ8040 NX system and optimizing the SPME Arrow injection method, five off-flavor methoxypyrazines were successfully measured at ng/L (ppt) levels. Using MRM improved selectivity and enabled isomer-specific analysis, including differentiation of isomers that are difficultto separate by GC alone.&nbsp;When applied to real processed tomato products, the method enabled quantitation of 2-methoxy-3,5-dimethylpyrazine (MDMP). This system reduces matrix interference and provides high sensitivity for trace-level off-flavor compounds.<h3>3. Thermo Fisher Scientific: Sentinel PRO 710 environmental mass spectrometer Precise real time gas analyzer for toxic volatile organic compounds</h3><ul><li>Product specification</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/sentinel_pro_710_spec_sheet_en_886523bfc2.pdf">Full PDF for download</a></li></ul>The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=3&amp;search=Sentinel+PRO">Thermo Scientific™ Sentinel PRO Environmental Mass Spectrometer </a>is a highly reliable and versatile gas analyzer ideal for reporting the presence of toxic VOCs from fugitive emissions in industrial settings to ensure worker safety.&nbsp;<h5>Fugitive emissions of toxic VOCs&nbsp;</h5>Wherever there is potential danger for fugitive emissions of toxic organic vapors from a chemical production unit, regulating authorities often require plants to keep records of ambient vapor concentrations to protect workers from exposure. Various forms of capture include evacuated vessels, organic vapor monitors, or purge and trap devices, all of which require samples to be sent for analysis. Alternatively, electrochemical sensors or open path FT-IR spectroscopy can provide more immediate results. However, none of these technologies are capable of providing the spatial and temporal resolution required to qualify as actionable information.&nbsp;<h5>Analytical platform&nbsp;</h5>The primary feature of the Sentinel PRO mass spectrometer is the magnetic sector analyzer. This field-proven technology has demonstrated the strongest performance for industrial on-line gas analysis. Magnetic sector technology offers precision, accuracy, long intervals between calibrations. The new touchscreen interface further enhances usability, providing intuitive in-person operation, simplified maintenance, and real-time data viewing. Multi-role user permissions ensure security and control allowing operators to customize settings based on their specific needs.&nbsp;<h5>Comprehensive data collection&nbsp;</h5>With speed and precision, the Sentinel PRO analyzer monitors all the critical areas for short-term exposure levels of toxic VOCs, and also provides accurate and time-weighted average exposure data. With a high number of sample points available, many can be located close to potential leak points such as valve stems, etc., enabling leak detection and correction before any toxic hazard is created.&nbsp;<h5>Membrane inlet mass spectrometry&nbsp;</h5>The analyzer is fitted with a membrane inlet to reduce the pressure of the sample air from atmospheric to the working pressure of the enclosed ion source. This allows a method of sample introduction that greatly enhances the system’s sensitivity to VOCs. Since the membrane is more permeable to VOCs than to major air gases, it provides enrichment by several orders of magnitude, enabling detection as low as 5 ppb (species dependent) permits easy membrane replacement during annual routine maintenance to minimize downtime and increase productivity.</div></div></div></div></div></div></section>

News from LabRulezGCMS Library - Week 21, 2026

There are various ways to categorize gas chromatographic detectors. The main classifications include:<ol><li>Detectors sensitive to concentration vs mass flow rate sensitive detectors</li><li>Selective vs universal (non-selective) detectors</li><li>Non-destructive vs destructive detectors</li></ol>A concentration-sensitive detector is one in which the peak response depends on the absolute analyte concentration. At constant concentration, the response is constant regardless of change in flow rate of the carrier gas. If the flow rate changed, there will be no effect on the peak height of the analytes.On the other hand, a mass flow rate sensitive detector is one in which the peak response changes with the flow rate of the carrier gas. In other words, if the carrier gas flow rate is decreased, there will be a proportional decrease in peak height.Universal detectors can see a wider variety of compounds, whilst a selective detector is very specific to certain chemical elements or groups. Non-destructive detectors maintain the same structure of the analytes as they had whilst passing through the column, while destructive detectors break down the actual molecule to produce signals.In GC analysis there is not much significance if the detector is destructive or non-destructive as there is no preparative work involved.Electron capture detectors (ECD) are mass flow dependent detectors selective to electronegative elements and they are also non-destructive. ECD is actually the go-to and most sensitive detector for the analysis of electronegative compounds.The carrier gas is ionized by an electron source such as 3H or 63Ni. A low-energy stream of electrons produces a steady current that is magnified and measured. The current decreases when an electron-capturing compound enters the detector. Loss of electrons by the electronegative compound is measured as the signal.ECD can detect from the picogram to nanogram level of concentration. As ECD is selective for electronegative compounds, it is the go-to detector for halogenated compounds, nitrogen-, oxygen-, and carbonyl group-containing compounds.<h4>Points to Remember About ECD</h4><ul><li>The ECD detector has a radioactive element in it. Maintenance of the detector should be performed only by qualified professionals with appropriate radioactive shielding. Hardware disposal is strictly regulated by local legislation.</li><li>The ECD is compatible with ultra-high-purity nitrogen and helium as the carrier gas.</li><li>Since the detector is a mass flow rate detector, there is a proportional impact on peak area and peak height with change in flow rate. The method should be run under constant flow mode for quantitative analysis.</li><li>Nitrogen or argon-methane mixture can be used as makeup gases. The makeup gas flow and composition should be optimized for higher sensitivity and maintained constantly between consecutive runs to obtain reproducible quantitative results.</li><li>The detector should operate at the temperature mentioned in the detector’s user manual. Usually, the upper limits are 350–400 °C, depending on the manufacturer and model. Most ECDs are equipped with automatic shut-down if the temperature limit is exceeded.</li><li>The carrier gas used for analysis should be free of oxygen, moisture, and halocarbons to extend detector lifetime and avoid baseline problems.</li></ul>ECDs can be baked out at higher temperatures to clean them. However, the bakeout temperature should not exceed the maximum limit mentioned in the detector’s user guide. Since ECD contains a radioactive beta particle source, no attempt should be made to clean the detector mechanically.

What You Need to Know About Electron Capture Detectors

If you’ve reviewed your laboratory’s operational budget recently, you have likely noticed a troubling trend: the cost of keeping your instruments running is climbing, and nitrogen gas is a major culprit.According to Organomation’s newly released <a target="_blank" rel="noopener noreferrer" href="https://explore.organomation.com/nitrogen-usage-survey-2025-download">Nitrogen Usage 2025 Survey Report</a>, you are not alone in this frustration. In fact, 35% of laboratories ranked high costs as their number one frustration with their current nitrogen supply — overshadowing safety, logistics, and maintenance concerns.With 96% of labs expecting their nitrogen demand to increase or remain steady over the next three years, waiting for prices to drop isn’t a viable strategy. To protect your budget, you need to understand why prices are surging and, more importantly, how to insulate your lab from the volatility.<h3>The "Perfect Storm" Driving Prices Up</h3>As a chemist, you know that nitrogen is abundant in the atmosphere. However, the industrial process of separating, purifying, compressing, and transporting it is energy-intensive and tied heavily to global markets. Three key factors are driving the 2025 price surge:<h4>1. Rising Energy Costs</h4>While nitrogen itself is free, the energy required to produce high-purity nitrogen gas (via fractional distillation) is not. Industrial gas manufacturing is heavily reliant on energy prices. In 2025, U.S. natural gas prices for industrial sectors have seen significant volatility, with some forecasts showing double-digit percentage increases for power plants due to export demands and tightening domestic supply. When the cost of energy rises,<a target="_blank" rel="noopener noreferrer" href="https://www.reuters.com/markets/commodities/energy/high-rising-natural-gas-costs-may-spur-fresh-climb-us-coal-use-2025-12-03/"> gas suppliers pass those costs directly to the consumer</a>.<h4>2. The Logistics Premium</h4>If you rely on high-pressure cylinders or liquid dewars, you aren't just paying for gas; you are paying for diesel, driver wages, and truck maintenance. Logistics frustrations were a top complaint in our 2025 survey, particularly for labs using liquid dewars.<ul><li>Delivery Fees &amp; Surcharges: Fuel surcharges are now a standard line item on many invoices, fluctuating weekly with the oil market.</li><li>Cylinder Rental: The "rent" for holding steel cylinders often creeps up annually, regardless of how much gas you actually consume.</li></ul><h4>3. Hidden Waste (The "Boil-Off" Tax)</h4>For labs using liquid nitrogen dewars, the "price per liter" is deceptive. Liquid nitrogen constantly boils off to maintain its temperature. If your lab uses dewars for gaseous applications (like evaporation), you are paying for gas that vanishes into the room before it ever reaches your instrument. Our survey found that while dewars nominally cost $2.06/liter, the effective cost is often higher due to this inevitable waste.<h3>The Data: Cylinders vs. Generators</h3>The most striking finding from our 2025 Survey Report was the massive price disparity between supply methods. When we analyzed the average cost per liter across 78 laboratories, the data was clear:<h5>Nitrogen Source: Average Cost Per Liter</h5><ul><li>Gas Cylinders: $2.79</li><li>Liquid Dewars: $2.06</li><li>Lab-Scale Generator: $0.70</li></ul>Laboratories relying on cylinders are paying nearly 400% more per liter than those generating their own gas. Over the course of a year, this difference can amount to thousands of dollars in operational waste.<h3>How to Reduce the Price Tag: A Two-Step Strategy</h3>You cannot control the global energy market or supply chain logistics. However, you can control how you source and use your nitrogen.<h4>Step 1: Cut the Cord (Switch to Generation)</h4>The single most effective way to lower your nitrogen spend is to stop buying it in tanks. While the upfront cost of equipment can sometimes be a hurdle for capital budgets, new financial models are making this transition accessible for labs of all sizes.<h5>Why Generation Wins on Cost</h5>A nitrogen generator, like the Organomation NITRO-GEN, separates nitrogen from your lab's existing compressed air supply using a hollow-fiber membrane. Once installed, your "cost per liter" drops to essentially zero—you are only paying for the electricity to run the compressor.<ul><li>Rapid ROI: Most labs see a return on investment in 12 to 18 months by<a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/how-much-could-i-save-switching-to-a-nitrogen-generator"> generating nitrogen</a>. After this break-even point, your nitrogen supply becomes a fixed asset rather than a monthly liability.</li><li>Operational Freedom: Weighing under 20 lbs and wall-mountable, the NITRO-GEN <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1902">N2 generator</a> produces up to 20 L/min of gas, sufficient to support blowdown evaporators with up to 48 sample positions.</li></ul><h5>Overcoming the "Sticker Shock" with Lease-to-Own</h5>Historically, the barrier to entry for nitrogen generators has been the initial purchase price. To solve this, Organomation has introduced a Lease-to-Own program designed to align equipment costs with your operating budget rather than your capital reserves.This program transforms a large capital expenditure into a manageable monthly operating expense. Unlike standard rental agreements where payments are lost forever, this program allows you to build equity.<ul><li>Immediate Savings: You can install the unit and stop paying cylinder rental fees immediately, often letting the operational savings offset the lease payments.</li><li>Path to Ownership: At the end of the lease term, you own the equipment outright—often for a nominal final payment (as low as $1).</li><li>Preserve Capital: By spreading the cost over time, you keep your cash reserves available for other critical research needs or staffing.</li></ul>By leveraging a lease-to-own model, you can "cut the cord" on gas contracts today without waiting for next year’s capital budget approval.<h4>Step 2: Optimize Your Usage (Stop Wasting Gas)</h4>Even with a cheap supply, wasting gas is bad science and bad business. especially if you use nitrogen for sample concentration (blowdown evaporation).<ul><li>Use Individual Flow Control: Many basic evaporators blow gas into every position, regardless of whether a sample is present. High-quality units (like the<a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products?category=3&amp;manufacturerItems=540&amp;search=N-EVAP"> N-EVAP</a>) feature individual needle valves for each sample position. Rule of thumb: If you are running 10 samples in a 24-position unit, ensure the other 14 needles are closed.</li><li>Check for Leaks: It sounds basic, but a loose fitting on a regulator can waste cylinders of gas over a weekend. A simple "snoop test" (soapy water) on your connections every quarter is a zero-cost maintenance habit that saves money.</li><li>Optimize Bath Temperature: In nitrogen blowdown evaporation, gas flow and temperature work together. If your water bath is too cool, you have to blow gas for longer to <a target="_blank" rel="noopener noreferrer" href="https://blog.organomation.com/blog/optimum-temperature-for-nitrogen-evaporation-instruments">achieve dryness</a>. Ensuring your bath is at the optimal temperature for your solvent (e.g., 35-40°C for DCM) reduces the total time the gas needs to run.</li></ul><h3>Conclusion</h3>The era of "cheap" delivered gas is likely behind us. As the 2025 survey data shows, labs sticking to the status quo of cylinders and dewars are facing rising costs and logistical headaches. By transitioning to on-demand generation and optimizing your evaporation workflows, you can insulate your lab from market volatility and keep your budget focused on research, not utility bills.<blockquote>Want to see the full data? Download the<a target="_blank" rel="noopener noreferrer" href="https://explore.organomation.com/nitrogen-usage-survey-2025-download"> Laboratory Nitrogen Usage Report </a>to benchmark your lab’s spending against industry peers.Curious about your potential savings? Try our <a target="_blank" rel="noopener noreferrer" href="https://www.organomation.com/how-much-could-i-save-switching-to-a-nitrogen-generator">Nitrogen Generator Savings Calculator </a>to see exactly how much you could save by making the switch.</blockquote>

Why Nitrogen Is Costing Labs More Than Ever — And How to Reduce the High Price Tag

Article

Product

Application

Academy

Laboratories

Poster

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Phenomenex is a global technology leader committed to developing novel analytical chemistry solutions that solve the separation and purification challenges of researchers in industrial, government and academic laboratories.

Phenomenex

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

ARC Polyarc System

A Breakthrough Innovation Revolutionizing GC/FID Technology. The Polyarc System is transforming the way scientists use gas chromatographs with Flame Ionization Detectors.

The Polyarc system has a catalytic microreactor that enhances new and existing gas chromatographs (GCs) with flame ionization detectors (FIDs) by converting all organic compounds to methane molecules prior to their detection by the FID. In doing so, the Polyarc system reduces the need to perform time-consuming calibrations by creating a uniform detector response for truly universal carbon detection.
The Polyarc system gives scientists the capability to determine purity, quantify unknowns, qualify products, investigate, improve development and more in a simple, fast and more economical way that is transforming the industry.
<blockquote>
Available for gas chromatographs (GC) <a href="https://gcms.labrulez.com/products?category=1&amp;manufacturerItems=10">Agilent</a> 5890, 6890, 7820, 7890, 8890, <a href="https://gcms.labrulez.com/products?category=1&amp;manufacturerItems=1">Shimadzu</a> 2030, <a href="https://gcms.labrulez.com/products?category=1&amp;manufacturerItems=3">Thermo Fisher</a>, Varian, Bruker a Scion GC.
</blockquote>
<h3>What is Polyarc?</h3>
The Polyarc is the next evolution of flame ionization detection (FID). The Polyarc converts the FID into a truly universal carbon detector using proprietary catalytic reactions that convert organic molecules to methane immediately prior to detection.
<h3>Why is it important?</h3>
The FID has two main challenges: lack of uniform response and low response to certain compounds. The Polyarc enhances your FID to solve these challenges by giving your FID a uniform response to nearly all organic molecules. The result is more accurate data, improved productivity, lab efficiencies, and the ability to detect more compounds.
<h3>How Does the Polyarc® System Work to Simplify and Improve GC/FID Quantification?</h3>
The Polyarc system has a catalytic microreactor that enhances GC/FIDs by converting all organic compounds to methane molecules prior to detection by the FID. The result?
A universal response for ALL organic molecules.
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_Polyarc_FID_vs_FID_Response_Factors_0f9c958558/ARC-PolyarcFID-vs-FID-Response-Factors.jpg" alt="ARC: Comaprison of Polyarc/FID vs FID Response Factors.jpg"/>
<h3>The Polyarc System Features an Optimized Design and Seamless Integration</h3>
The Polyarc system is the first commercial technology of its kind. The device uses proprietary technologies including novel catalysts, a specially designed 3D-printed micro reactor, and fast seamless integration into existing equipment.
The optimized internal design and catalyst microstructure maintains separation performance and peak shape while increasing sensitivity and enabling accurate quantification without calibration standards.
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_Optimalizovany_design_a_specialne_navrzeny_3_D_tisteny_mikroreaktor_Polyarc_70ccedc41e/ARC-Optimalizovany-design-a-specialne-navrzeny-3D-tisteny-mikroreaktor-Polyarc.jpg" alt="ARC: Specially designed 3D-printed micro reactor Polyarc"/>
<h3>Perform Cutting-Edge Chromatography on Any Organic Compound with a Polyarc® System</h3>
Realize a greater breadth of analysis with improved detection of compounds previously invisible or with an extremely low sensitivity by gas chromatography using FID only — while reducing the need for time intensive calibration.
The careful selection and robust catalyst design enables the analysis of a wide variety of compounds including a range of heteroatoms, compounds of various sizes, and samples containing common catalytic poisons (e.g., S).
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_Analyza_siroke_skaly_sloucenin_pomoci_Polyarc_systemu_3e18241358/ARC-Analyza-siroke-skaly-sloucenin-pomoci-Polyarc-systemu.png" alt="ARC: Polyarc system enables the analysis of a wide variety of compounds"/>
<h3>How Does the Polyarc System Compare to a Methanizer?</h3>
A conventional methanizer converts CO and CO₂ to methane, allowing low level FID detection of CO and CO₂. The significant advantage of the Polyarc system is that it converts all compounds to methane, allowing not only for the detection of CO and CO₂ , but also millions of other organic compounds.
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_Srovnani_systemu_Polyarc_s_metanizerem_7df16e09c7/ARC-Srovnani-systemu-Polyarc-s-metanizerem.jpg" alt="ARC: Comparison of the Polyarc System with a metanizer"/>

ARC Jetanizer (Methanizer)

The Jetanizer is the easiest and most robust methanizer.

<h3>What is Jetanizer™?</h3>
The Jetanizer is the easiest and most robust methanizer. A methanizer is a chemical reactor that converts carbon dioxide and carbon monoxide to methane to enable sensitive detection by a flame ionization detector (FID) from &lt;20 ppb to 100%!
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_Analyza_CO_2_od_1ppm_do_100_s_pouzitim_GC_jetanizeru_FID_9c922be2e9/ARC-Analyza-CO2-od-1ppm-do-100percent-s-pouzitim-GC-jetanizeru-FID.jpg" alt="ARC: CO₂ analysis from 1ppm to 100% with GC/Jetanizer/FID"/>
<h3>Why is it important?</h3>
<h4>Low-level detection of CO and CO₂ is important in:</h4>
<ul>
<li>catalysis </li>
<li>hydrogen (H₂) purity analysis </li>
<li>dissolved gas analysis (DGA)</li>
<li>greenhouse gas (GHG) analysis, </li>
<li>transformer oil gas analysis (TOGA)</li>
<li>ethylene/propylene monomers analysis </li>
<li>safe entry analysis, and more</li>
</ul>
Traditionally, large nickel-catalyst-filled tube methanizers are used, however, they are prone to frequent failures, and they are difficult and time consuming to operate and maintain. 
<blockquote>
Legacy nickel catalyst methanizers take 2-6 hours to install and replace. Jetanizers take &lt;5 minutes.
</blockquote>
ARC’s Jetanizer solves these challenges by improving response, robustness and ease of installation, by incorporating state-of-the-art catalysts into an FID jet. Moreover, the Jetanizer enables low level &lt;1 ppm formaldehyde analysis by GC avoiding the pitfalls of HPLC analysis of formaldehyde.
<blockquote>
For use with these GC models: <a href="https://gcms.labrulez.com/products?category=1&amp;manufacturerItems=10">Agilent 5890, 6890, 7890, 8890, Intuvo</a>, <a href="https://gcms.labrulez.com/products?category=1&amp;manufacturerItems=1">Shimadzu 2010, 2030 GC</a>.
</blockquote>
<h3>Benefits over Traditional Methanizers</h3>
<ul>
<li>Lower up-front cost</li>
<li>No extra plumbing: minimize fittings and leaks</li>
<li>No extra heater or controller: utilizes heat from FID</li>
<li>FAST installation: Less than 5 minutes</li>
<li>Ability to be used with formaldehyde</li>
<li>Higher sulfur tolerance</li>
<li>Higher catalytic activity = larger linear dynamic range</li>
<li>Free up space on the GC</li>
<li>No toxic metals: The Jetanizer™ does not contain nickel catalysts</li>
</ul>
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_Kalibrace_analyzy_CO_2_s_pouzitim_GC_jetanizeru_FID_2f0b6171fc/ARC-Kalibrace-analyzy-CO2-s-pouzitim-GC-jetanizeru-FID.jpg" alt="ARC: CO₂ analysis calibration with GC/Jetanizer/FID"/>

ARC Precision Split

ARC’s PrecisionSplit device allows scientists and chromatographers to take advantage of the quantitative power of the Polyarc/FID in combination with the mass identification power of the mass spectrometer, all in the same injection in real time.

<h3>Why does my MS need an FID?</h3>
A mass spectrometer (MS) provides valuable qualitative data, but poses several challenges to accurate quantification. Adding a flame ionization detector (FID) in parallel with the MS gives complementary quantitative carbon concentrations with minimal extra effort or equipment. We believe every MS needs an FID companion for quantitative analysis, especially for non-targeted analysis or tentatively identified compounds where quantification is desired.
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_Precision_Split_6271ed1240/ARC-Precision-Split.jpg" alt="ARC: Precision Split"/>
<h3>The benefits of a MS/FID split:</h3>
<ul>
<li>Virtually eliminate response factor variability</li>
<li>Quantify accurately (better linearity, more consistent response, fewer calibration errors)</li>
<li>Improve sensitivity for poor ionizers with the FID</li>
<li>Save your source!</li>
</ul>
<h3>The Data</h3>
Response factor (RF) variation in the mass spectrometer (i.e., the relative response of the MS to different chemicals) can lead to significant errors in quantification. Two compounds that have the same response/area in the MS can have concentrations that differ more than 100-fold (see <a href="https://www.sciencedirect.com/science/article/pii/S0731708520304283">Jordi et al.</a>). 
As you can see below, the Polyarc/FID split can reduce this response factor variation so that accurate quantification of tentatively identified compounds is possible.
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_Variance_RF_u_MS_detektoru_8e02773edc/ARC-Variance-RF-u-MS-detektoru.jpg" alt="ARC: RF variation with MS"/>
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_Variance_RF_s_Polyarc_FID_splittrem_ca7def3cb3/ARC-Variance-RF-s-Polyarc-FID-splittrem.jpg" alt="ARC: RF variation with Polyarc/FID split"/>

ARC ISOTOPE (COMBUSTION REACTOR FOR IRMS)

The World’s First Low Temperature Combustion Reactor for GCC-IRMS

Winner of <a href="https://theanalyticalscientist.com/techniques-tools/tasias-2018-strokes-of-genius">The Analytical Scientist Innovation Awards in 2018</a>, the ARC Isotope was developed for low-temperature combustion of steroids and hydrocarbons for carbon isotope measurements. 
The system easily integrates into existing instrumentation and outperforms conventional combustion reactors.
<h3>GCC-IRMS Chromatograms of steroids and alkanes using the ARC Isotope reactor show excellent performance and operability compared with legacy reactors.</h3>
<h4>Advantages Include:</h4>
<ul>
<li>Excellent Performance</li>
<li>Lower Operating Temperature</li>
<li>Reduced Complexity</li>
<li>Improved Robustness</li>
</ul>
<img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/ARC_GCC_IRMS_chromatogramy_steroidu_a_alkanu_s_pouzitim_reaktoru_ARC_ISOTOPE_d6299edd7a/ARC-GCC-IRMS-chromatogramy-steroidu-a-alkanu-s-pouzitim-reaktoru-ARC-ISOTOPE.jpg" alt="ARC: GCC-IRMS chromatograms of steroids and alkanes using ARC ISOTOPE reactor"/>
Data provided by Tobias, H.J., et al., Analytical Chemistry, <a href="https://pubs.acs.org/doi/10.1021/acs.analchem.8b05043">Read More</a>

Products focused on GC from ARC distributed by LabRulez - page 1

Related content

Why Nitrogen Is Costing Labs More Than Ever — And How to Reduce the High Price Tag

What You Need to Know About Electron Capture Detectors

News from LabRulezGCMS Library - Week 21, 2026