EU Regulation 396/2005: Pesticide Residue Testing and the Critical Role of QuEChERS Evaporation in Food Safety

<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 4th May 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application note by<strong> Shimadzu, </strong>presentation by <strong>MDCW / JEOL</strong> and technical note by <strong>Thermo Fisher Scientific!</strong></p><h3><strong>1. MDCW / JEOL: Flow-Modulated GCxGC-QMS Analysis Without Splitting Off the GC Flow</strong></h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_16_Jensen_11e29d5022.pdf"><strong>Full PDF for download</strong></a></li></ul><section><div><div><div><div><div><div><p>This presentation by Kirk Jensen (JEOL USA) explores the feasibility of performing <strong>flow-modulated comprehensive two-dimensional gas chromatography (GC×GC) coupled with quadrupole mass spectrometry (QMS)</strong> without splitting the GC flow, which is traditionally required to protect MS systems from high carrier gas flows. The core concept builds on GC×GC, where compounds are separated using a primary and secondary column connected via a modulator, significantly increasing separation power compared to one-dimensional GC. The presentation contrasts <strong>thermal modulation</strong> (offering sharper peaks and higher theoretical sensitivity but requiring cryogenic cooling) with <strong>flow modulation</strong>, which avoids cryogens, handles volatile analytes well, and is more flexible, but typically demands higher gas flows that standard MS systems cannot tolerate .</p><p>To address this limitation, the study utilizes the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?manufacturerItems=24&amp;search=JMS-Q1600GC"><strong>JEOL JMS-Q1600GC</strong></a><strong> UltraQuad quadrupole GC-MS system</strong>, which can accept unusually high carrier gas flows (up to ~20 mL/min), enabling direct coupling with a <strong>SepSolve INSIGHT flow modulator</strong> without splitting the effluent . The analytical setup includes dual GC columns (e.g., Zebron ZB-5MSplus for the first dimension and BPX50 for the second), high secondary flow rates (~25 mL/min), and electron ionization (EI) MS detection. Additional system components include optional FID detection, bleed line control, and ChromeSpace software for data processing . This configuration allows full analyte transfer into the MS, eliminating the need for flow splitting and potentially improving detection efficiency.</p><p>Experimental results demonstrate the applicability of this approach to complex mixtures, including a <strong>pesticide mixture containing over 200 compounds</strong> and real-world samples such as perfumes and fuels. The GC×GC-MS system produced detailed two-dimensional chromatograms with high spectral quality, enabling the correct identification of approximately 120 compounds despite relatively moderate spectral match factors . Comparisons at different flow rates (e.g., 25 vs. 50 mL/min) showed that spectral integrity and compound identification remain robust, indicating that higher flow operation does not significantly compromise MS performance.</p><p>In conclusion, the work demonstrates that <strong>flow-modulated GC×GC-QMS without flow splitting is feasible</strong>, provided that the MS system can tolerate high carrier gas flows. While further optimization is needed (e.g., column selection, inlet pressure, and separation conditions), the approach offers a practical alternative to thermal modulation by eliminating cryogens and simplifying operation. Future work will focus on improving sensitivity, optimizing separations, and exploring alternative carrier gases such as hydrogen to reduce costs and expand applicability</p></div></div></div></div></div></div></section><h3><strong>2. Shimadzu: Detailed Hydrocarbon Analysis by Nexis GC-2030 Using ASTM D6730</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00863_en_eb633bc741.pdf"><strong>Full PDF for download</strong></a></li></ul><h5><strong>User Benefits</strong></h5><ul><li>Detailed compositional analysis of gasoline in accordance with ASTM D6730 is feasible using the Nexis GC-2030.&nbsp;</li><li>By employing PONAsolution, a PONA/DHA analysis software, laborious identification tasks can be reduced, and quantitation calculations and report generation can be performed automatically.</li></ul><p>ASTM D6730 specifies the analysis of hydrocarbons in gasoline and oxygenates such as ethanol, methyl tert-butyl ether (MTBE), and ethyl tert-butyl ether (ETBE) over a boiling point range up to 225 ̊C. Identification and quantification of individual compounds in gasoline are critically important for refinery process control and product quality assurance. In this application news, we report compositional analysis of gasoline conforming to ASTM D6730 using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Nexis+GC-2030"><strong>Nexis GC-2030 gas chromatograph</strong></a>. Gasoline typically comprises over 100 hydrocarbons, making identification tasks highly complex; however, PONAsolution, a PONA/DHA analysissoftware,simplifies this process.</p><h4><strong>PONAsolution</strong></h4><p>PONAsolution Ver.6 provides retention index libraries for each relevant standard (ASTM D6730, D6729, D5134, D6733). Identification of n-alkanes automatically corrects the retention times of the remaining several hundred components, thus streamlining the identification process. When only a specific retention region requires adjustment, the two-point identification function is useful (Fig. 1). In the two-point identification procedure, reference and sample chromatograms are compared while assigning corresponding peaks. First, click on an identified component mark in the reference data (Fig. 1, a), then click the matching sample peak (Fig. 1, b). Repeat this for a second pair of peaks. The retention times of components between these two anchor points are then automatically corrected.</p><h4><strong>Conclusion</strong></h4><p>Compositional analysis of gasoline in accordance with ASTM D6730 was performed. The combination of SH PONA Tuning Column and SH-1 PONA main column enabled separation of compounds with closely spaced retention times. Moreover, use of PONAsolution software greatly simplifies complex identification tasks.</p><h3><strong>3. Thermo Fisher Scientific: Fiber optic probes add flexibility to Raman chemical analysis</strong></h3><ul><li>Technical note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/drx3_flex_tech_note_tn54708_bebb56b870.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Fourier Transform Infrared Spectroscopy (FTIR) and Raman Spectroscopy are non-destructive analytical techniques that rely on the interaction of electromagnetic radiation with molecular vibrations to provide information about the chemical composition and structure of a sample. Despite their similarities, there are some distinct differences between the two techniques. In principle, FTIR is based on the absorption of infrared radiation by molecules and measures changes in dipole moment during molecular vibrations. Raman spectroscopy, on the other hand, is based on the inelastic scattering of monochromatic light and measures changes in polarizability during molecular vibrations.&nbsp;</p><p>When applied to bulk chemical analysis, both FTIR and Raman spectroscopy can be used to analyze solids, liquids, and gases, but the nature of Raman spectroscopy lends some unique sampling advantages. Additionally, Raman often requires little to no sample preparation. Presented herein are application examples that highlight some of the sampling advantages of Raman spectroscopy. All the spectral data in this technical note were collected using a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2238"><strong>Thermo Scientific™ DXR3 Flex Raman Spectrometer</strong></a> equipped with a fiber optic probe. (Fiber optics are readily available for Raman spectroscopy because of the use of visible and NIR light and do not require the exotic materials associated with FTIR fiber optics.) Preliminary tests for all samples were carried out using both 532 nm and 785 nm excitations, and it was determined that the 785 nm laser set gave an overall better balance between fluorescence and Raman scattering efficiency.</p><h4><strong>Summary&nbsp;</strong></h4><p>In this technical note, the analyses of a variety of samples by Raman spectroscopy are demonstrated. All samples were analyzed without sample preparation.&nbsp;</p><ul><li>Precise and localized analysis at the focal point of the Raman-exciting laser allows sampling through glass bottles, blister packaging and plastic containers, which eliminates possible cross contamination and analyst exposure to hazardous materials. The contributions from the packaging and containers depend on the type of container material, the container thickness, and the materials’ chemical compositional complexity, but these contributions can be readily subtracted out when needed.&nbsp;</li><li>Water is a weak Raman scatterer. Raman therefore has reduced water sensitivity, making it a preferred technique for aqueous solution analysis over FTIR. As demonstrated in the analysis of an energy drink, the Raman bands from water can be subtracted from the spectrum of the aqueous solution, leading to the identification of the components of the solution.&nbsp;</li><li>Raman spectroscopy is well suited for the analysis of inorganic materials, especially in identifying the crystal phases and polymorphs, as demonstrated by the analyses of minerals and pigments in a painting.&nbsp;</li><li>Fiber optic probes provide flexibility and ease of maneuverability. This is particularly advantageous when analyzing samples that are difficult to access or manipulate, such as large containers, geological samples and paintings</li></ul><p>The DXR3 Flex has multiple sampling options available. A properly configured fiber-optic probe is arguably the most versatile accessory for the analysis of bulk solids and liquids. The advantages, both from those inherent to Raman spectroscopy and those resulting from the use of fiber optic probe, provide opportunities for a wide variety of different applications when using the DXR3 Flex Raman Spectrometer.</p>

News from LabRulezGCMS Library - Week 19, 2026

<p><strong>🎤Francis Femi Oloy</strong></p><p><strong>In this episode of Concentrating on Chromatography, David speaks with Francis Femi Oloy about using chromatography to uncover hidden pollutants in real-world water systems.</strong></p><p>Femi’s team analyzed polychlorinated biphenyls (PCBs) in six major rivers in southwestern Nigeria — compounds that were banned decades ago but still persist in the environment. Using a workflow that many analytical labs will recognize — liquid–liquid extraction, cleanup, rotary evaporation, nitrogen blowdown, and GC-ECD detection — they quantified 25 PCB congeners at trace levels and linked the results to ecological and human health risk.</p><h4><strong>In this conversation, we cover:</strong></h4><ul><li>Why legacy pollutants like PCBs still show up today</li><li>Choosing GC-ECD vs LC-MS for halogenated compounds</li><li>Liquid–liquid extraction and matrix cleanup strategies</li><li>Why sample concentration is critical for dilute environmental samples</li><li>How rotovap + nitrogen blowdown work together without losing volatile analytes</li><li>Seasonal trends (why wet season levels were higher)</li><li>Translating concentration data into meaningful risk assessments</li></ul><h3><strong>Video Transcription</strong></h3><section><div><div><div><div><div><div><p><strong>Persistent organic pollutants</strong> such as polychlorinated biphenyls (<strong>PCBs</strong>) remain a significant environmental concern despite decades of regulatory restrictions. In this interview, Francais Femi Oloy discusses the environmental and analytical challenges associated with monitoring PCB contamination in rivers of southwestern Nigeria, a rapidly industrializing region where urban growth, industrial activity, agriculture, and dense populations intersect with extensive aquatic systems.</p><p>Oloy explains that his interest in environmental contaminant analysis emerged from observing unexplained health problems and environmental degradation while growing up in Nigeria. This motivated his transition into organic and environmental chemistry, with a focus on identifying pollutants present in drinking water, agricultural soils, and food systems. Southwestern Nigeria, particularly the Lagos region, represents a critical environmental monitoring area due to intense industrial development, shipping activity, and widespread human dependence on rivers for domestic use, agriculture, and fishing.</p><p>Although PCBs are considered “<strong>legacy pollutants</strong>” and are no longer intentionally produced, the interview highlights why they continue to persist in aquatic environments. Old electrical transformers and aging industrial equipment still contain PCB residues, while historical contamination stored in river sediments can become remobilized during flooding, dredging, or sediment disturbance. Because PCBs are hydrophobic and resistant to degradation, they preferentially accumulate in sediments and bioaccumulate through aquatic food chains, creating long-term environmental and human exposure risks.</p><p>A major focus of the discussion centers on the analytical workflow used for PCB determination in environmental water samples. Composite river water samples were collected in amber glass bottles to avoid contamination and photodegradation, preserved with sodium azide to minimize microbial activity, and stored under cooled conditions prior to extraction. The analytical protocol employed <strong>liquid–liquid extraction</strong> using dichloromethane (DCM) and hexane to recover both polar and nonpolar PCB congeners. Oloy emphasizes that liquid–liquid extraction was selected over solid-phase extraction (SPE) because of concerns about congener retention within sorbent materials and clogging issues associated with large-volume environmental samples.</p><p>Following extraction, concentration and cleanup represented critical analytical stages due to the trace-level occurrence and volatility of PCBs. Silica and alumina cleanup procedures were used to remove matrix interferences prior to instrumental analysis. The concentration workflow combined rotary evaporation for bulk solvent reduction with nitrogen blowdown for final volume reduction to less than 1 mL, while carefully avoiding excessive temperature or complete dryness to minimize analyte loss. Oloy repeatedly stresses that improper concentration procedures are among the most common causes of analytical failure in PCB analysis.</p><p>For instrumental determination, the study utilized <strong>gas chromatography coupled with electron capture detection (GC-ECD)</strong> rather than LC-MS or GC-MS. According to Oloy, GC was preferred because PCBs are sufficiently volatile for gas chromatographic separation, while ECD provided superior sensitivity and selectivity for chlorinated compounds at environmentally relevant concentrations. The interview also discusses analytical validation strategies, including the use of surrogate standards to assess <strong>recoveries,</strong> which ranged from approximately <strong>85% to 114%</strong>, and signal-to-noise-based determination of detection limits.</p><p>The study further examined <strong>seasonal variations in PCB concentrations</strong>, revealing <strong>higher levels during the wet season</strong>. This observation was attributed to rainfall-driven runoff from contaminated infrastructure, sediment resuspension, and lower temperatures that reduce volatilization losses. To communicate toxicological relevance beyond simple concentration reporting, the researchers also calculated <strong>toxic equivalency values (TEQs)</strong>, converting mixtures of PCB congeners into biologically meaningful toxicity estimates comparable to dioxin toxicity metrics.</p><p>Beyond environmental monitoring, Oloy highlights broader research interests focused on <strong>pollutant remediation and sustainable environmental protection</strong>. His group is also involved in developing catalytic materials capable of degrading or removing persistent contaminants from environmental systems. Throughout the discussion, he emphasizes that analytical chemistry plays a central role not only in detecting pollutants, but also in enabling prevention, remediation, and long-term environmental management strategies.</p></div></div></div></div></div></div></section><blockquote><p><strong>This text has been automatically transcribed from a video presentation using AI technology. It may contain inaccuracies and is not guaranteed to be 100% correct.</strong></p></blockquote><blockquote><h4><strong>Concentrating on Chromatography Podcast</strong></h4><p>Dive into the frontiers of chromatography, mass spectrometry, and sample preparation with host David Oliva. Each episode features candid conversations with leading researchers, industry innovators, and passionate scientists who are shaping the future of analytical chemistry. From decoding PFAS detection challenges to exploring the latest in AI-assisted liquid chromatography, this show uncovers practical workflows, sustainability breakthroughs, and the real-world impact of separation science. Whether you’re a chromatographer, lab professional, or researcher you'll discover inspiring content!</p><p>You can find <strong>Concentrating on Chromatography Podcast </strong>in podcast apps:</p><ul><li><a target="_blank" rel="noopener noreferrer" href="https://open.spotify.com/show/1wZg67rCjoGju4yhqxI3tL"><strong>Spotify</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podcasts.apple.com/tz/podcast/concentrating-on-chromatography/id1788429185"><strong>Apple podcast</strong></a></li><li><a target="_blank" rel="noopener noreferrer" href="https://podscan.fm/podcasts/concentrating-on-chromatography"><strong>podscan</strong></a></li></ul><p>and on <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/@ChromatographyTalk/videos"><strong>YouTube channel</strong></a></p></blockquote>

Tracking Toxic PCBs in River Water using Gas Chromatography–Electron Capture Detection

Article

Product

Application

Video

Scientists

Environment

Food

Presentation

Interview

Science and research

Laboratories

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Thermo Scientific TraceGOLD™ TG-XLBMS GC Columns

Choose Thermo Scientific TraceGOLD™ TG-XLBMS GC Column which offer a low-polarity, low-bleed column suitable for a wide range of applications.

<p><strong>Choose these columns which offer a low-polarity, low-bleed column suitable for a wide range of applications.</strong></p><h4><strong>Engineered for Superior Performance</strong></h4><ul><li>Proprietary stationary phase</li><li>Unique selectivity</li><li>Max. temperature: 340/360 °C</li></ul><h4><strong>Recommended for:</strong></h4><ul><li>Pesticides</li><li>PCB congeners</li><li>PAH's</li></ul><h4><strong>Application:</strong></h4><ul><li>Aroclor Mixes Analysis</li><li>GC/MS for PCB Congeners</li><li>GC/MS for PAHs</li><li>GC/MS for Aroclor Mixes</li></ul>

Thermo Scientific TraceGOLD™ TG-VRX GC Columns

Thermo Scientific™ TraceGOLD TG-VRX GC Columns provide good resolution and fast analysis times for volatile compounds.

<p><strong>Thermo Scientific™ TraceGOLD TG-VRX GC Columns provide good resolution and fast analysis times for volatile compounds.</strong></p><ul><li>Proprietary stationary phase</li><li>Optimized dimensions for analysis of volatile organic pollutants</li><li>Ideally suited for US EPA Methods 502.2, 524.2, 8021, and 8260</li></ul><h4><strong>Recommended for:</strong></h4><ul><li>Volatile organic pollutants</li><li>Aromatics</li></ul><h4><strong>Application:</strong></h4><ul><li>Volatile Organic Pollutants Analysis</li><li>GC/MS for US EPA Method 8021 Compounds</li></ul><h4><strong>Similar to:</strong></h4><ul><li>DB-VRX</li><li>Rtx-VRX</li></ul>

Thermo Scientific TraceGOLD™ TG-VMS GC Columns

Thermo Scientific™ TraceGOLD TG-VMS GC Columns provide good resolution and fast analysis times for volatile compounds.

<p><strong>Thermo Scientific™ TraceGOLD TG-VMS GC Columns provide good resolution and fast analysis times for volatile compounds.</strong></p><ul><li>Proprietary stationary phase</li><li>Optimized dimensions for analysis of volatile organic pollutants</li><li>Ideally suited for US EPA Method 8260B</li><li>Max. temperature: 260 °C</li></ul><h4><strong>Recommended for:</strong></h4><ul><li>Volatile organic pollutants</li></ul><h4><strong>Application:</strong></h4><ul><li>Volatile Organic Pollutants Analysis</li><li>GC/MS for US EPA Method 8260B Compounds</li></ul><h4><strong>Similar to:</strong></h4><ul><li>Rtx-VMS</li></ul>

Thermo Scientific TraceGOLD™ TG-OCP I and II GC Columns

Analyze organochlorine pesticides and herbicides with ultralow bleed, superior sensitivity, excellent peak shape using Thermo Scientific™ TraceGOLD™ TG-OCP I and TG-OCP II GC columns.

<p><strong>Analyze organochlorine pesticides and herbicides with ultralow bleed, superior sensitivity, excellent peak shape and the highest levels of reproducibility using Thermo Scientific™ TraceGOLD™ TG-OCP I and TG-OCP II gas chromatography columns.</strong></p><h4><strong>Redefining Your Expectations for Gas Chromatography:</strong></h4><ul><li>Low bleed with excellent signal-to-noise ratio, sensitivity and mass spectral integrity</li><li>Fast analysis time to facilitate full separation of chlorinated pesticides</li><li>Ideal for U.S. EPA methods 8081, 608 and CLP</li></ul><h4><strong>Proprietary Formulation Facilitates Analysis of Difficult Compounds:</strong></h4><ul><li>The acidic nature of the silanol groups prevalent within many GC columns can result in the adsorption of basic compounds, which frequently leads to peak tailing.</li><li>In TraceGOLD GC columns, basic functional groups are bonded onto the column surface to reduce the effects of tailing and improve run-to-run reproducibility and sensitivity.</li></ul><h4><strong>A Leap Forward in Column Performance with Low Bleed and Superior Inertness</strong></h4><ul><li>This low-bleed, stable column produces consistent results, and the low baseline noise enables improved limits of detection with enhanced resolution of low-level analytes.</li><li>Minimizing column bleed extends column lifetime, leading to higher productivity.</li><li>Reducing column bleed increases reproducibility of the stationary phase over time, resulting in greater run-to-run and batch-to-batch reproducibility.</li><li>Superior inertness ensures excellent peak shape and sensitivity, especially for highly active or difficult-to-analyze compounds.</li></ul><h4><strong>Recommended Use:</strong></h4><ul><li>Organochlorine pesticides</li><li>Herbicides</li></ul><h4><strong>Similar to:</strong></h4><ul><li>Rtx™-CLPesticides</li><li>Rtx™-CLPesticides2</li></ul>

Thermo Scientific TraceGOLD™ TG-OPP I and II GC Columns

Analyze organophosphorus pesticides with ultralow bleed, superior inertness, and consistent reproducibility using Thermo Scientific™ TraceGOLD™ TG-OPP I and II GC Columns.

<p><strong>Analyze organophosphorus pesticides with ultralow bleed, superior inertness, and consistent reproducibility using Thermo Scientific™ TraceGOLD™ TG-OPP I and II GC Columns. This column's low bleed delivers excellent signal-to-noise ratio, sensitivity, and mass spectral integrity. Expect full separation of organophosphorus pesticides with a fast analysis time. TraceGOLD TG-OPP I and II GC Columns are ideal for U.S. EPA methods 8141A.</strong></p><h4><strong>Redefines Expectations for Gas Chromatography:</strong></h4><ul><li>Low bleed, delivering excellent signal-to-noise ratio, sensitivity and mass spectral integrity.</li><li>Fast analysis time, facilitating full separation of organophosphorus pesticides.</li><li>Ideal for U.S. EPA methods 8141A</li></ul><h4><strong>A Leap Forward in Column Performance with Low Bleed and Superior Inertness</strong></h4><ul><li>This low-bleed, stable column produces consistent results, and the low baseline noise enables improved limits of detection with enhanced resolution of low-level analytes.</li><li>Minimizing column bleed extends column lifetime, leading to higher productivity.</li><li>Reducing column bleed increases reproducibility of the stationary phase over time, resulting in greater run-to-run and batch-to-batch reproducibility.</li><li>Superior inertness ensures excellent peak shape and sensitivity, especially for highly active or difficult-to-analyze compounds.</li></ul><h4><strong>Recommended Use:</strong></h4><ul><li>GC/MS for Organophosphorus Pesticides</li></ul><h4><strong>Similar to:</strong></h4><ul><li>Rtx™-OPPesticides</li><li>Rtx™-OPPesticides2</li></ul>

Thermo Scientific TraceGOLD™ TG-PAH GC Columns

Use these thermally stable TraceGOLD TG-PAH GC columns for fast analysis of regulated polycyclic aromatic hydrocarbons (PAHs) in complex food and environmental samples.

<p><strong>Perform rapid analysis of regulated PAHs such as persistent organic pollutants (POPs) in complex food and environmental samples using Thermo Scientific™ TraceGOLD™ TG-PAH GC columns.&nbsp;</strong></p><p>High selectivity and maximum resolution of this capillary silica based column, combined with its unique bonded chemistry, ensure accurate separation of isobaric compounds even at very low concentration levels. The TraceGOLD TG-PAH GC column is regarded as highly robust due to the exceptionally high thermal stability and long life time. Sensitivity is of paramount importance in meeting regulatory standards in the challenging trace analysis.</p><p>Designed for high resolution analysis of polycyclic aromatic hydrocarbons (<strong>PAHs</strong>) in <strong>complex food and environmental samples</strong>.</p><h4><strong>Key benefits</strong></h4><ul><li>Fast analysis of regulated PAHs</li><li>Maximize resolution for critical isobaric PAHs</li><li>Max. temperature of 360°C</li><li>Low column bleed</li></ul>

Thermo Scientific Trace™ TR-1 GC Columns

Use Thermo Scientific Trace™ TR-1 non-polar GC column for method development and analysis of chlorinated and nitroaromatic compounds and environmental samples.

<p><strong>Use the Thermo Scientific™ TRACE™ TR-1 GC column for method development and chlorinated and nitroaromatic compounds and environmental analyses.&nbsp;</strong></p><ul><li>These non-polar phase, 100% dimethyl polysiloxane gas chromatography columns have a high operating temperature.</li><li><strong>Max. temperature: </strong>340/360 °C</li><li><strong>USP Type: </strong>G1, G2, G38</li></ul>

Thermo Scientific Trace™ TR-1MS GC Columns

Use Thermo Scientific Trace™ TR-1MS low bleed nonpolar column for GC/MS environmental analyses that require high temperature and an inert phase.

<p><strong>With low bleed and a maximum operating temperature of 340–360°C, the Thermo Scientific™ TRACE™ TR-1MS column is ideal for all GC/MS applications. The column is particularly well suited for applications such as GC/MS environmental analyses, which require an inert phase that can operate at high temperature.</strong></p><h4><strong>Engineered for Superior Performance:</strong></h4><ul><li>Nonpolar phase, 100% dimethyl polysiloxane</li><li>High operating temperature</li><li>Inert phase suited for environmental analyses</li></ul><h4><strong>Excellent Quality and Reproducibility:</strong></h4><ul><li>Low bleed even at elevated temperatures</li><li>Outstanding robustness for difficult separations</li><li>Reliable and reproducible performance</li></ul><h4><strong>Applications:</strong></h4><ul><li>Chlorinated and nitroaromatic compounds</li><li>GC/MS environmental analyses</li></ul><h4><strong>Recommended For:</strong></h4><ul><li>Phthalates</li><li>Polymers</li><li>Total recoverable petroleum hydrocarbons (TRPHs)</li></ul><h4><strong>Alternative Uses:</strong></h4><ul><li>Chlorinated Aromatics</li><li>Organochlorine Pesticides</li><li>Organophosphorous Pesticides</li><li>PAHs</li><li>Paraffins</li><li>Polywax</li><li>Pyrethroids</li><li>Semivolatiles</li><li>Xylenes</li></ul><h4><strong>Similar To:</strong></h4><ul><li>DB-1</li><li>DB-Petro</li><li>BP1</li><li>HP-1</li><li>HP-1MS</li><li>Rtx™-1</li><li>Ultra-1</li><li>SPB™-1</li><li>SPB™-1 Sulfur</li><li>Petrocol™ DH</li><li>CP-Sil 5CB</li><li>RSL-150</li><li>RSL-160</li><li>ZB-1</li><li>CB-1</li><li>OV™-1</li><li>PE-1</li><li>007-1(MS)</li><li>SP™-2100</li><li>SE-30</li><li>RH-1</li><li>CC-1</li><li>CP-Sil 5CB MS</li><li>VF-1ms</li></ul>

Thermo Scientific Trace™ TR-5 GC Columns

Choose these excellent starting Thermo Scientific Trace™ TR-5 GC Columns for method development, capable of performing most required separations.

<p><strong>Excellent starting columns for method development,Thermo Scientific™ TRACE™ TR-5 GC Columns are capable of performing most required separations.</strong></p><ul><li>Nonpolar phase, 5% phenyl methyl polysiloxane</li><li>High operating temperature and extremely low-bleed</li><li>Widely used in a variety of applications</li></ul><h4><strong>Recommended For:</strong></h4><ul><li>Alcohols</li><li>Free fatty acids</li><li>Aromatics</li><li>Flavors</li><li>Low polarity pesticides</li></ul><h4><strong>Similar To:</strong></h4><ul><li>DB-5</li><li>BP5</li><li>Rtx-5</li><li>HP-5</li><li>Ultra-2</li><li>PTE-5</li><li>SPB5</li><li>MDN-5</li><li>CP-Sil 8CB</li><li>SPB-5</li><li>AT-5</li><li>ZB-5</li><li>007-2(MPS-5)</li><li>SE-52, SE-54</li></ul>

Thermo Scientific TracePLOT™ TG-BOND Q GC Columns

Achieve consistent, reproducible separation of CO2, methane and 02/N2/CO with Thermo Scientific™ TracePLOT TG-BOND Q GC columns 

<p><strong>Achieve consistent, reproducible separation of CO2, methane and 02/N2/CO. Thermo Scientific™ TracePLOT TG-BOND Q GC columns deliver high performance and unsurpassed stability.&nbsp;</strong></p><p>The columns use a nonpolar, 100% divinyl benzene phase, and the particles are incorporated into the walls of the tubing for essentially no particle release. This strong bonding helps prevent damage to detection systems.</p><h4><strong>Applications:</strong></h4><ul><li>C1 to C3 isomers and alkanes up to C12</li><li>Separation of CO2, methane and O2/N2/CO</li><li>Analysis of oxygenated compounds and solvents</li></ul><h4><strong>Similar To:</strong></h4><ul><li>CP-PoraPLOT Q</li><li>Rt™-Q-BOND</li><li>CP-PoraBond Q</li><li>Supel-Q™-Plot</li><li>AT™-Q</li></ul>

Products from category Non-polar GC columns focused on Consumables distributed by Thermo Fisher Scientific (EMEA) - page 1

Related content

Tracking Toxic PCBs in River Water using Gas Chromatography–Electron Capture Detection

EU Regulation 396/2005: Pesticide Residue Testing and the Critical Role of QuEChERS Evaporation in Food Safety

News from LabRulezGCMS Library - Week 19, 2026