Labs&nbsp;that rely on helium gas are&nbsp;facing a major crisis…unless they have LECO instruments.&nbsp;Due to the military conflict in the Middle East, Qatar’s Ras Laffan Industrial City,&nbsp;the world’s largest helium production hub, providing one-third of the world’s helium,&nbsp;has&nbsp;shut down operations.&nbsp;To make matters worse,&nbsp;the Strait of Hormuz,&nbsp;the shipping lane used to&nbsp;export helium, has also been closed,&nbsp;meaning&nbsp;even pre-filled helium containers are stuck&nbsp;with&nbsp;no&nbsp;viable&nbsp;route to customers.&nbsp;Naturally,&nbsp;the price&nbsp;of helium has now risen&nbsp;dramatically;&nbsp;most spot prices have doubled.&nbsp;A&nbsp;critical&nbsp;scarcity&nbsp;issue&nbsp;is looming as&nbsp;the world must now&nbsp;operate&nbsp;on&nbsp;roughly 5.2&nbsp;million cubic meters&nbsp;per&nbsp;month&nbsp;less of helium.&nbsp;<h3>Why Helium&nbsp;Cost and Supply&nbsp;Matters&nbsp;to Labs&nbsp;</h3>Although many people may recognize helium&nbsp;as the gas that fills party balloons,&nbsp;it&nbsp;plays a&nbsp;critical&nbsp;role in much&nbsp;more serious&nbsp;matters.&nbsp;Helium&nbsp;has&nbsp;unique properties, like an extremely low boiling point, inertness, and high thermal conductivity, which&nbsp;makes&nbsp;it indispensable in several high-tech applications.&nbsp;&nbsp;For example, research labs&nbsp;may use helium as a&nbsp;carrier&nbsp;gas&nbsp;when performing&nbsp;elemental analyses or&nbsp;gas chromatography-mass spectrometry, which is used&nbsp;to&nbsp;separate and&nbsp;identify&nbsp;chemical compounds in samples.&nbsp;But research labs&nbsp;are&nbsp;often&nbsp;government-funded and run under strict budgets,&nbsp;so&nbsp;the price hike&nbsp;on&nbsp;helium could&nbsp;mean labs have to&nbsp;pause&nbsp;their research until everything falls back&nbsp;under control,&nbsp;which could be months or longer.&nbsp;Even well-funded labs could suffer if the supply is simply too stretched to&nbsp;equip&nbsp;the lab with&nbsp;what&nbsp;they need, as medical uses are given top priority.&nbsp;This could have a serious impact on accuracy and compliance with regulated methods.&nbsp;&nbsp;<h3>The Consequences&nbsp;Reach Farther&nbsp;</h3>When helium becomes unavailable or prohibitively expensive, the ripple effects are immediate and far-reaching. It affects more than&nbsp;just&nbsp;balloons and research labs:&nbsp;<ul><li>Delayed Medical Diagnostics: MRI machines, which rely on helium to cool their superconducting magnets, may be taken offline, delaying critical scans.&nbsp;</li><li>Semiconductor Bottlenecks: Chip shortages could worsen,&nbsp;impacting&nbsp;everything from smartphones to electric vehicles and AI infrastructure.&nbsp;</li><li>Industrial Disruption: Welding, aerospace, and fiber optics manufacturing&nbsp;face rising costs and potential production halts.&nbsp;</li></ul><h3>LECO’s Solution: Instruments That&nbsp;Don’t&nbsp;Rely on Helium&nbsp;&nbsp;</h3>Amidst this pending&nbsp;crisis, LECO offers a practical and forward-thinking solution.&nbsp;This marks the 5th&nbsp;major helium supply crisis since 2006,&nbsp;and&nbsp;it’s&nbsp;likely there will be more after this. Helium&nbsp;supply is concentrated&nbsp;to&nbsp;just a few regions, meaning that any time there is a disruption to one of these, it can create a large effect on the industry.&nbsp;That’s&nbsp;why we designed our innovative analytical instruments&nbsp;to&nbsp;operate&nbsp;using alternative carrier gases.&nbsp;&nbsp;Depending on the instrument, alternative gases&nbsp;such as nitrogen,&nbsp;argon,&nbsp;or hydrogen may be used in place of helium. These gases are&nbsp;abundant, cost-effective, and&nbsp;less prone&nbsp;to the geopolitical volatility that plagues helium supply chains.&nbsp;&nbsp;LECO’s helium-free&nbsp;options&nbsp;ensure that operations stay online, efficient, and future-proof&nbsp;in a world where helium is becoming increasingly scarce and expensive.&nbsp;This flexibility is no longer a luxury—it’s&nbsp;a necessity.&nbsp;If your lab or facility is feeling the pressure of helium scarcity, now is the time to explore alternatives.&nbsp;This&nbsp;isn’t&nbsp;the first helium shortage, and it&nbsp;won’t&nbsp;be the last.&nbsp;Is your lab prepared?<h3>LECO Instruments Supporting Non-Helium Carrier Gases&nbsp;</h3><h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/36">Pegasus BT</a> (Bench-Top GC–TOFMS, <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/37">incl. BT 4D</a>)</h4><ul><li>Supported Carrier Gases: Helium or Hydrogen</li><li>Notes on Usage / Limitations: Supports H₂ as GC carrier with a retrofit kit for safety. Performance on hydrogen is on par with helium – the Pegasus BT series meets its full sensitivity specs with either gas.</li><li>App Note: “<a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/PEGBT_TEA_TREE_ESSENTIAL_OIL_HYDROGEN_CARRIER_GAS_203_821_651_95c7a05807/PEGBT_TEA_TREE_ESSENTIAL_OIL_HYDROGEN_CARRIER_GAS_203-821-651.pdf">A Rapid, Robust and Sensitive Analysis of Tea Tree Essential Oil Quality by GC-TOFMS with Hydrogen as Carrier Gas</a>”</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_Pegasus_BT_2_bc8a8d0505.jpg" alt="LECO: Pegasus BT" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_Pegasus_BT_2_bc8a8d0505.jpg 238w," sizes="100vw" width="932" height="612"><h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/1097">Pegasus BTX</a> (Next-gen BT, incl. BTX 4D)</h4><ul><li>Supported Carrier Gases: Helium or Hydrogen</li><li>Notes on Usage / Limitations: Designed for seamless helium-to-hydrogen use. The Pegasus BTX series maintains trace-level sensitivity with either helium or hydrogen carrier gas, a rare capability in GC–MS. No hardware changes needed beyond standard setup.&nbsp;</li><li>App Note: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/PEGBTX_GINGER_OIL_HYDROGEN_CARRIER_GAS_203_821_694_1685d36546.pdf">“Ginger Oil Analysis and Grade Differentiation with Pegasus BTX Using Hydrogen Carrier Gas”</a></li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_LECO_PEGASUS_BTX_GC_TOFMS_cover_image_34704e689d.jpg" alt="LECO: Pegasus BTX" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_LECO_PEGASUS_BTX_GC_TOFMS_cover_image_34704e689d.jpg 235w," sizes="100vw" width="416" height="276"><h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/38">Pegasus&nbsp;HRT</a>&nbsp;(High-Resolution TOF-MS,<a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/39"> incl. 4D</a>)</h4><ul><li>Supported Carrier Gases: Helium or Hydrogen</li><li>Notes on Usage / Limitations: High-resolution GC–TOFMS systems support H₂ as a carrier gas as well as He.&nbsp;Note:&nbsp;Strict safety protocols apply due to&nbsp;hydrogen’s&nbsp;flammability. Hydrogen use is not recommended in instruments/configurations where gas could accumulate (e.g.&nbsp;very long, vertical&nbsp;flight tubes), but LECO’s HRT instruments&nbsp;utilize&nbsp;Folded Flight Path technology, which&nbsp;eliminates&nbsp;this concern.&nbsp;</li><li>App Note: <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/GC_MS_Analysis_Hydrogen_Carrier_Gas_MMS_Ion_Source_HRT_G_Cx_GC_TOFMS_SA_ASMS_23_LPSS_310_6247a1baaf/GC-MS_Analysis_Hydrogen_Carrier_Gas_MMS_Ion_Source_HRT-GCxGC-TOFMS_SA_ASMS23_LPSS-310.pdf">“GC–MS Analysis with Hydrogen Carrier Gas on GC×GC-HRTOFMS (MMS Ion Source)”</a></li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_Pegasus_GC_HRT_831fcb6d1e.jpg" alt="LECO: Pegasus&nbsp;HRT" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_Pegasus_GC_HRT_831fcb6d1e.jpg 226w," sizes="100vw" width="3600" height="2487"><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1884">LECO 828 Series</a> (Nitrogen/Protein/Carbon/Hydrogen)</h4><ul><li>Supported Carrier Gases: Helium or Argon&nbsp;</li><li>Notes on Usage / Limitations: The LECO 828 Series&nbsp;supports&nbsp;argon as an alternative&nbsp;carrier gas&nbsp;to helium. Helium provides higher TCD sensitivity (important for low-N samples),&nbsp;whereas&nbsp;argon operation raises the nitrogen detection limit and slightly reduces low-range precision. Switching gas type simply requires updating the method and flow settings (no hardware change&nbsp;required).</li><li>App Note: <a target="_blank" rel="noopener noreferrer" href="https://www.leco.com/documents/203-821-665/?_gl=1*1d6stb6*_up*MQ..*_ga*MTMwMjg4MTUxNC4xNzc2MTAzOTU0*_ga_K8NYKVEKHY*czE3NzYxMDM5NTQkbzEkZzAkdDE3NzYxMDM5NTQkajYwJGwwJGg0NTY2NjUwNjk.*_ga_KRDSR1XM7X*czE3NzYxMDM5NTQkbzEkZzAkdDE3NzYxMDM5NTQkajYwJGwwJGgw">“Carbon, Hydrogen, and Nitrogen in Biomass using CHN828”</a>&nbsp;</li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_rada_828_Makroanalyza_spalovanim_pro_analyzator_uhliku_vodiku_dusiku_a_bilkovin_e86acd897e.jpg" alt="LECO 828 Series" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_rada_828_Makroanalyza_spalovanim_pro_analyzator_uhliku_vodiku_dusiku_a_bilkovin_e86acd897e.jpg 137w," sizes="100vw" width="454" height="516"><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1885">LECO 928 Series</a> (Nitrogen/Protein/Carbon/Sulfur)</h4><ul><li>Supported Carrier Gases: Helium or Argon&nbsp;</li><li>Notes on Usage / Limitations: The LECO&nbsp;928 Series&nbsp;also&nbsp;supports&nbsp;argon carrier gas as an alternative to helium. Helium use gives the best sensitivity and lowest detection limits for nitrogen, while argon use increases analysis time slightly and raises the nitrogen detection limit (due to the smaller thermal conductivity difference). The 928-series instruments have built-in&nbsp;settings for either gas; when switching, users adjust flow&nbsp;and select&nbsp;the appropriate carrier gas&nbsp;in the system settings. Users also have the option to select&nbsp;a larger aliquot loop&nbsp;in the analysis method&nbsp;to improve&nbsp;precision.&nbsp;</li><li>App Note: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/CN_928_CN_CARBON_BLACK_GRAPHITE_203_821_684_c2224fa8be.pdf">“Determination of Carbon and Nitrogen in Carbon Black and Graphite”</a></li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_rada_928_Stanoveni_makrohodnot_pomoci_spalovani_3_74de99f8e5.jpg" alt="LECO 928 Series" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_rada_928_Stanoveni_makrohodnot_pomoci_spalovani_3_74de99f8e5.jpg 216w," sizes="100vw" width="711" height="513"><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1880">736</a>/<a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1882">836</a> Series&nbsp;(Inert Gas Fusion O2/N2&nbsp;/H2&nbsp;&nbsp;analyzers)</h4><ul><li>Supported Carrier Gases: Helium or Argon&nbsp;</li><li>Notes on Usage / Limitations: LECO’s inert gas fusion analyzers for oxygen and nitrogen in inorganic materials (e.g.&nbsp;models ON736, ON836) traditionally use helium as the carrier for the TCD measuring N2. These systems can run on argon as well, provided the appropriate He/Ar&nbsp;dual-purpose TCD is installed. Switching from He to&nbsp;Ar&nbsp;in these instruments is a one-time setup change;&nbsp;both gases are supported in the software (selectable “Gas Type” setting).&nbsp;When using argon, the furnace runs hotter&nbsp;and produces more soot, so maintenance (filter changes, cleaning)&nbsp;becomes more frequent.&nbsp;Low-level nitrogen precision is also slightly&nbsp;lessened&nbsp;with argon.&nbsp;&nbsp;</li><li>App Note: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/ONH_836_O_N_H_IRON_STEEL_NICKEL_COBALT_ALLOYS_COMPARISON_203_821_601_3c9836f4b4.pdf">“Determination of Oxygen, Nitrogen, and Hydrogen in Iron, Steel, Nickel-base, and Cobalt-base Alloys: Comparison of Analytical Performance Between Argon and Helium Carrier”&nbsp;</a></li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_rada_736_Analyza_kysliku_a_dusiku_roztavenim_vzorku_v_inertnim_plynu_3_0ec033bbbb.jpg" alt="LECO 736 Series" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_rada_736_Analyza_kysliku_a_dusiku_roztavenim_vzorku_v_inertnim_plynu_3_0ec033bbbb.jpg 151w," sizes="100vw" width="825" height="852"><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_rada_836_Analyza_prvku_pro_detekci_kysliku_dusiku_a_vodiku_5_8011397ce6.jpg" alt="LECO 836 Series" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_rada_836_Analyza_prvku_pro_detekci_kysliku_dusiku_a_vodiku_5_8011397ce6.jpg 134w," sizes="100vw" width="657" height="764"><h4><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/products/1850">DH603&nbsp;Hydrogen Determinator</a></h4><ul><li>Supported Carrier Gases: Nitrogen (carrier), Helium (calibration gas)&nbsp;</li><li>Notes on Usage / Limitations: The DH603 measures diffusible and residual hydrogen in metals by hot extraction. It does&nbsp;not use helium as a carrier&nbsp;during analysis—instead&nbsp;it uses nitrogen as the purge/carrier gas in the TCD system. A small helium dose is used only for calibration and system checks (to introduce a known H2&nbsp;quantity via He-H2&nbsp;mix). In routine operation, the furnace is purged with N2&nbsp;and any hydrogen released from the sample is carried to a TCD that&nbsp;references against&nbsp;the nitrogen background. This design avoids flammable gas in the instrument entirely.&nbsp;</li><li>App Note: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/DH_603_H_STEEL_SAMPLES_203_821_376_68e63cfea2.pdf">“Hydrogen Determination in Steel Samples Using DH603”&nbsp;</a></li></ul><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/LECO_DH_603_Stanoveni_zbytkoveho_a_difuzniho_vodiku_horkou_extrakci_d968c7c42b.jpg" alt="LECO: DH603&nbsp;Hydrogen Determinator" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_LECO_DH_603_Stanoveni_zbytkoveho_a_difuzniho_vodiku_horkou_extrakci_d968c7c42b.jpg 237w," sizes="100vw" width="1325" height="875">

As Helium Prices Rise and Supply Shrinks, LECO Customers Have Reliable Alternatives

Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 13th April 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">LabRulezICPMS</a> libraries.</blockquote>This week we bring you application notes by Agilent Technologies, BaySpec, and Shimadzu and presentation by MDCW / SepSolve!<h3>1. Agilent Technologies: Sensitive and Reproducible Determination of Nitrosamines by GC/MSD</h3>Analysis of seven nitrosamines using the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=5977+GC%2FMSD">Agilent 5977 GC/MSD</a> in positive chemical ionization mode with ammonia<ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_nitrosamines_5977_gc_ms_5994_9063en_agilent_acf455cd8e.pdf">Full PDF for download</a></li></ul>Nitrosamines are a well known class of carcinogenic compounds that have been the subject of extensive scientific investigation and regulatory assessment for several decades.1 In recent years, various regulatory authorities have established drinking water guidelines for N-nitrosodimethylamine (NDMA), a disinfection byproduct of water treatment processes.&nbsp;In 2004, the US Environmental Protection Agency (EPA) published Method 521, a GC/MS-based method for the analysis of seven nitrosamines including NDMA in drinking water, supporting monitoring and regulatory programs.2 In 2010, Health Canada proposed a maximum acceptable concentration for NDMA in drinking water of 40&nbsp;ng/L.3 In the European Union (EU), several EU member states have introduced their own national limits for nitrosamines in drinking water. In Germany, for example, a concentration of 10&nbsp;ng/L will trigger the initiation of remedial actions to reduce the concentration of NDMA.4&nbsp;This application note demonstrates the ability of the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=5977+GC%2FMSD">Agilent&nbsp;5977 Series GC/MSD</a> to enable linear and reproducible detection of the seven nitrosamines included in EPA Method&nbsp;521 using positive chemical ionization (PCI) with&nbsp;ammonia.&nbsp;Chemical ionization (CI) is a soft ionization technique used in mass spectrometry that enhances molecular ion visibility through controlled ion–molecule reactions. In CI, a reagent gas is ionized first, and the resulting reagent ions subsequently transfer charge to the analyte, producing significantly less fragmentation than conventional electron ionization (EI).&nbsp;PCI further improves sensitivity by generating predominantly protonated molecular ions [M +H]+ , concentrating the ion signal into a high-abundance species and delivering a stronger response and improved signal-to-noise ratios for trace-level compounds. Ammonia is an especially effective reagent gas for PCI due to its clean and efficient proton‑transfer chemistry, low background spectral contribution, and ability to produce stable, high-intensity molecular ions.&nbsp;These characteristics make ammonia PCI a highly suitable ionization mode for the sensitive and selective analysis of small polar contaminants such as nitrosamines, where low‑level detection and confident molecular ion identification are critical.<h4>Conclusion&nbsp;</h4>The study has shown that the Agilent 5977 GC/MSD, operated in PCI mode with ammonia, delivers the sensitivity, accuracy, and reproducibility needed for trace-level nitrosamine&nbsp;analysis. The method demonstrated excellent linearity, with regression coefficients (R²) of 0.9989 or better across the 0.1 to 20.0&nbsp;ppb range for six nitrosamines, and 0.9987 across the 0.5 to 20.0&nbsp;ppb range for NPYR. Analytical repeatability was robust, with %RSD values &lt; 4.8% at the lowest calibration level, indicating a stable and consistent instrument response. Instrument Detection Limits ranged from 0.0063 to 0.0655&nbsp;ppb, demonstrating the system's ability to reliably distinguish analyte signals from instrumental noise. Overall, these results confirm the suitability of the 5977 GC/MSD as a sensitive and dependable platform for nitrosamine analysis in applications that require stringent trace‑level detection<h3>2. BaySpec: Peptide sequencing using <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2218">Continuity miniature mass spectrometer</a></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Bay_Spec_App_Note_Peptide_Sequencing_002_af7ca2496c.pdf">Full PDF for download</a></li></ul>Peptide identification and sequencing strategies by mass spectrometry have been very well-developed during the last 25 years after the soft ionization techniques have been introduced. When sequencing peptides with tandem mass spectrometry (MSn), peptides are cleaved at various locations off their backbones to generate fragment ions of different masses based on their amino acid sequences. The most common product ions are the b-, y-, and a-ions generated from the cleavage of amide bond (CO-NH) and the subsequent loss of CO from the b-ions to form a-ions. The resulting MSn spectra can be matched with a database or computed with an algorithm to get the original sequence of known or unknown peptides.&nbsp;Here we present an example of peptide sequencing with BaySpec’s highly-portable (22 kg) and battery operated Continuity -series portable mass spectrometer. It features a linear ion trap with collisionally induced dissociation (CID) for MSn analysis, similar to the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2219">Portability series mass spectrometers</a>. In addition, Continuity is equipped with a continuous atmospheric pressure sampling inlet with differential pumping, allowing the detection of a larger mass range (110 – 950 amu). BaySpec’s Continuity mass spectrometer is ideal for on-site peptide sequencing. In this application note, we show an example of peptide sequencing in a standard mixture (H2016, SigmaAldrich) with Continuity mass spectrometer. The mixture was dissolved in HPLC grade water, and then further diluted with an electrospray solution (50:50 methanol:water with 0.5% acetic acid). The diluted solution is directly infused into the API inlet of the Continuity mass spectrometer without any further treatment or separation.<h4><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2218">ContinuityTM Mass Spectrometer&nbsp;</a></h4>The Continuity mass spectrometer is one of BaySpec’s newest portable instruments. Continuity features a continuous sampling atmospheric pressure inlet, wide mass range and high sensitivity. Designed to bring the benefits of powerful mass to the field, the Continuity can service a variety of bulk or trace detection applications, as well as scientific studies.<h3>3. MDCW / SepSolve: Sniff smarter: Empowering GC–O with trap-based enrichment and GC×GC for advanced aroma profiling</h3><ul><li>Presentation</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/O_5_Mikaliunaite_29610bc29d.pdf">Full PDF for download</a></li></ul>The presentation focuses on improving the correlation between chemical analysis and human sensory perception in complex samples such as food matrices. Traditional gas chromatography–olfactometry (GC–O) workflows face two major limitations: the presence of trace-level odorants with extremely low odour detection thresholds and the frequent co-elution of compounds, which makes it difficult to assign specific sensory attributes to individual analytes. As highlighted in the early slides, these challenges often result in discrepancies between what instruments detect and what the human nose perceives .To address these issues, the study introduces trap-based enrichment as a key enhancement step. This approach enables pre-concentration and focusing of volatile organic compounds (VOCs) prior to GC analysis, while selectively removing interferents such as water and air. The use of electrically cooled traps allows efficient analyte retention and rapid thermal desorption, improving sensitivity without the need for cryogens. Importantly, this enrichment strategy enhances the detectability of trace odorants, enabling better alignment between instrumental signals and sensory perception.A second major advancement presented is the integration of comprehensive two-dimensional gas chromatography (GC×GC) coupled with TOF-MS and olfactory detection (GC×GC–O–TOF MS). Compared to conventional one-dimensional GC, GC×GC significantly increases separation capacity, effectively resolving co-eluting compounds. This enables more confident identification of odor-active compounds and clearer mapping between chromatographic peaks and recorded aroma descriptors. The workflow also incorporates an odour detection port (ODP), allowing simultaneous acquisition of chromatographic and sensory data, thereby bridging the gap between analytical chemistry and human olfaction.The methodology is demonstrated using real-world applications, including citrus rind and orange juice analysis, where complex aroma profiles are investigated. The results show that GC×GC combined with enrichment and advanced data processing (e.g., Smart Subtract®) enables detailed comparison of sample variants (e.g., juice with vs. without pulp) and identification of subtle compositional differences. Overall, the study highlights that combining trap-based enrichment, GC×GC separation, and integrated sensory detection provides a powerful platform for comprehensive aroma profiling, improving both sensitivity and interpretability in flavour and fragrance analysis<h3>4. Shimadzu: Dual-line Gas Analysis Using a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=gc-2060">Nexis GC-2060</a> Gas Chromatograph with a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GI-30+Auto+Gas+Injector">GI-30 Auto Gas Injector</a> and BID and TCD Detectors</h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_01171_en_5a83027622.pdf">Full PDF for download</a></li></ul><h5>User Benefits</h5><ul><li>The Nexis GC-2060 can be equipped with two GI-30 units, enabling automated gas analysis for two sample lines on a single GC.&nbsp;</li><li>The combination of TCD and BID detectors enables analysis of a wide range of sample concentrations.&nbsp;</li><li>Using the GI-30 auto gas injector enables automated gas-sample introduction with high repeatability</li></ul>Gas analysis is performed across a wide range of fields, including resource and energy applications and environmental applications. Typical target analytes include inorganic gases such as H2, N2, CO, and CO2, as well as light hydrocarbon gases such as CH4. Because concentration ranges and matrices vary depending on the sample, detection sensitivity and separation performance must be optimized to meet the measurement objective.&nbsp;Both BID and TCD detectors can detect all compounds except carrier gases (BID cannot detect Ne). The BID is a Shimadzudeveloped detector that enables highly sensitive analysis of lowlevel components at the ppm level and simultaneous analysis of multiple compounds, including H2. In contrast, the TCD provides stable analysis even at high concentrations on the order of percent, and it also has a short time from startup to analysis readiness. Using both detectors together allows a single GC system to cover a wide concentration range from low to high.&nbsp;This article describes dual-line gas analysis using a Nexis GC-2060 equipped with both a BID and a TCD, combined with automated sample introduction using the GI-30 auto gas injector. By combining a BID and a TCD,samples across a broad concentration range can be measured. In addition, automated introduction of gas samples using the GI-30 improves repeatability in continuous analysis and enhances operational efficiency.<h4>Dual-LineGas Analysis Using the GI-30</h4>The GI-30 is an auto gas injector that enables automated, continuous analysis of gas samples (Fig. 1 (right) shows a schematic diagram of the GI-30). With its highly expandable design, the <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=gc-2060">Nexis GC-2060 </a>can be equipped with two <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GI-30+Auto+Gas+Injector">GI-30</a> units (Fig. 1 (left)). This enables high-throughput automated gas analysis of two sample lines on a single GC. In addition, because the injection unit, column, detector, and carrier gas can be configured independently for each line, the system can accommodate gas samples with diverse compositions and concentrations. In this application, Line 1 was configured with an SPI/BID to provide highly sensitive detection of low-level components. The SPI is a split/splitless injection unit dedicated to gas analysis. Its high airtightness and inert deactivation of the flow path help suppress ambient air intrusion and analyte adsorption, making it effective for analyzing trace atmospheric components (e.g., N2 and O2) and components that tend to adsorb. In contrast, Line 2 was configured with an SPL/TCD. Using an SPL injection unit also allows liquid sample analysis and manual injection with a gas-tight syringe.<h4>Conclusion</h4>Low- and high-concentration gas samples were analyzed simultaneously on two lines using a Nexis GC-2060 equipped with two GI-30 units and a BID/TCD. By adopting a dual-line configuration with dual GI-30 units and selecting the injection unit, column, detector, and carrier gas according to the measurement objective, it is possible to expand the range of sample concentrations and compositions that can be measured. In addition, automated, continuous gas analysis using the GI-30 reduces the analyst’s workload and enables highly repeatable analysis that is difficultto achieve with manual introduction.

News from LabRulezGCMS Library - Week 16, 2026

It is our great pleasure to invite you to attend and contribute to the 19th International Symposium on Hyphenated Techniques in Chromatograph and Separation Technology (HTC-19), which will take place from May 26 to 29 in Leuven, Belgium.The HTC symposium series started in 1990 and is the ideal meeting place for scientists and practitioners from academia and industry and vendors to discuss and gather new insights in emerging technologies, instrumentation, workflows, and applications. Organized under the auspices of the Vrije Universiteit Brussel (VUB), the Catholic University of Leuven (KU Leuven), Ghent University (UGhent), and the Separation Science Group of the Royal Society of Chemistry (RSC), HTC-19 is expected to gather over 300 participants.<h3>Registration</h3><blockquote>👉<a target="_blank" rel="noopener noreferrer" href="https://www.kuleuven.be/register/en/htc-19-19th-international-symposium-on-hyphenated-techniques-in-chromatography-and-separation-technology/step1">Register HERE</a></blockquote><h4>Registration Fee</h4><h5>Regular (From 14 March 2026)</h5><ul><li>Industry / Academic: € 775</li><li>Student: € 425</li></ul><h5>Conference dinner / Tasting Event</h5><ul><li>Participants: € 95 / € 50</li><li>Accompanying persons: € 110 / € 60</li></ul><h5>Short courses (CE, GC and GCxGC, NANOLC-MS, 2D-LC)</h5><ul><li>Academic: € 500</li><li>Industry: € 500</li><li>Students: € 350</li></ul><h5>Short course (AI MD Development)</h5><ul><li>Academic: € 250</li><li>Industry: € 250</li><li>Students: € 125</li></ul><h3>Programme</h3><h4>Plenary Spekares</h4><h5>Under pressure: bringing supercritical fluids to multi-dimensional analysis systems</h5><ul><li>Caroline West, Université d’Orléans, France<ul><li>Caroline West is a full professor in analytical chemistry at the University of Orleans, France, where she is teaching separation science. Her main scientific interests lie in fundamentals of chromatographic selectivity, both in the achiral and chiral modes, in SFC and LC. She is also applying these methods, with or without hyphenation to extraction methods and/or MS, to samples of pharmaceutical interest and natural products. She has authored about 120 papers in international peer‐reviewed journals and has presented about 120 lectures in conferences. In 2015, she received the “LC‐GC Emerging Leader in Chromatography” award. She was ranked several times among the most influential people in analytical chemistry by “The Analytical Scientist” magazine (“Top 40 under 40” 2014 &amp; 2018, “The Power List” 2019, 2020 &amp; 2021), received the Jubilee medal from the Chromatographic Society (2021) and JFK Huber Lecture award from the Austrian Society of Analytical Sciences (2025). She is also an advisory board member for several journals in separation science.</li></ul></li></ul><h5>Open Science Cheminformatics Resources Supporting Hyphenated Non-target Screening Efforts</h5><ul><li>Emma Schymanski, University of Luxembourg, Luxembourg<ul><li>Professor Emma Schymanski is head of the Environmental Cheminformatics (ECI) group, FNR ATTRACT Fellow and special advisor to the rector for Open Science and Research Data Management. She has a double degree in Chemistry/Environmental Engineering from UWA, Perth, completed her PhD at UFZ Leipzig and postdoc at Eawag, Switzerland. Her research combines cheminformatics and computational (high resolution) mass spectrometry approaches to elucidate the unknowns in complex samples, primarily with non-target screening, and relate these to environmental causes of disease. She is involved in many collaborative efforts, with &gt;16,000 citations, &gt;100 publications and a book. An advocate for FAIR and open science, she is involved in several European and worldwide activities to improve the exchange of data, information and ideas between scientists, including the NORMAN Suspect List Exchange, MassBank, MetFrag, PubChemLite for Exposomics, the PubChem PFAS Tree, patRoon, ShinyTPs and the Chemical Stripes.</li></ul></li></ul><h5>The challenges of scale for meaningful environmental research</h5><ul><li>Leon Barron, Imperial College London, United Kingdom<ul><li>Professor Leon Barron leads the Emerging Chemical Contaminants group at Imperial College London. His research aims to further our understanding of complex chemical exposures on environmental and public health. He gained his PhD in 2005 from Dublin City University and in 2009 moved to King’s College London as an academic in Forensic Science until 2020. He moved to Imperial in 2020 and was recently promoted to full professor of Analytical and Environmental Sciences in 2025. He has pioneered several (bio)analytical methodologies especially the development and integration novel passive sampling tools, liquid chromatography-mass spectrometry methods and predictive machine learning for contaminant identification, monitoring and risk assessment. He is a Fellow of the Royal Society of Chemistry and is the current Chair of its Separation Science Interest Group. His work has been recognised particularly for its large-scale applicability including in national and international monitoring campaigns in partnership with academia, government, industry and the general public.</li></ul></li></ul><h5>Hyphenated methods in chromatography: Innovations realised and challenges remaining</h5><ul><li>Hans-Gerd Janssen, Unilever, The Netherlands<ul><li>Prof. Hans-Gerd Janssen obtained his MSc and PhD degree in analytical chemistry from the Eindhoven University of Technology. After having worked at this university for another 8 years as an assistant/associate professor, he moved to Unilever R&amp;D in 1999 and currently holds the position of science leader Food Compositional Analysis. From 2004 to 2019 he was a part-time professor at the University of Amsterdam at the chair ‘(bio-)macromolecular separations’. In 2019 he moved to Wageningen University where he now holds a part-time professor position in ‘recognition-based analytical chemistry’. Prof. Janssen has published more than 230 papers including six patents and seven book chapters. He is a member of the editorial advisory board of several scientific journals. He has been, or is, a member of the board of the Analytical Chemistry division of the Dutch Chemical Society and of the working group Separation Methods. He also is a member of the scientific or organizing committee of several symposia. Prof. Janssen was awarded the 2020 GC×GC scientific achievement award in recognition of his contribution to the field. In 2023 he was awarded the H.J. Dutton Award from the American Oil Chemist’s Society. In his research he focuses on the development of chromatographic methods and theories for the reliable, rapid and automated analysis of complex samples. Much of his work was on edible oils and fats, but also other food related samples including packaging materials and food processing got his attention. More recently his work focusses on food flavour analysis and understanding sensory perception from detailed chemical analysis.</li></ul></li></ul><h5>Delicious Science: A Chemical Journey Through the Kitchen</h5><ul><li>Peter Van Broeck, WM-Lightning B.V., Belgium<ul><li>Dr. Peter Van Broeck has more than 30 years of experience in analytical chemistry, process control, and technological innovation within the pharmaceutical and chemical industry. Since 2023, he has been Managing Director of WM-Lightning B.V., a consultancy firm specialized in innovation, interim management, and strategic support. He spent a significant part of his career at Johnson &amp; Johnson, where he held leadership roles in Analytical Development and Chemical Process Control. As Scientific Director, he was end-to-end responsible for the analytical strategy within continuous manufacturing, the implementation of Process Analytical Technology (PAT), and the introduction of new analytical technologies. He developed extensive international academic and industry networks and represented the organization in various innovation programs and conferences. Earlier, Dr. Van Broeck led the Chemical Process Control Lab, where he drove the global adoption of PAT. At Amylum NV and BetzDearborn Inc., he focused on analytical method development, laboratory setup, and the introduction of advanced techniques such as HT-GPC, NIR and hyphenated GC and HPLC techniques. He also served as a Guest Professor at Hasselt University, teaching Industrial Chemistry to Business Engineering students. Beyond his scientific career, Dr. Van Broeck has a long-standing passion for wine, gastronomy, and the chemistry of flavor. Building on early academic and R&amp;D experience in food analytics, he actively explores the intersection of taste, chemistry, and sensory experience, and is frequently invited as a speaker on topics such as food pairing and the science of brewing and winemaking.</li></ul></li></ul><h5>Shaken, not stirred – James Bond in the spotlight of physics</h5><ul><li>Metin Tolan, Faculty of Physics, TU Dortmund University, Germany<ul><li>Main areas of research: Investigation of the interfacial behavior of so-called “soft matter” (polymers, liquids, biomaterials), phase diagrams and stability of proteins, use of synchrotron radiation for materials research in general and further development of investigation methods, more than 200 publications in refereed journalsProfessional career: Since April 2025: Professor of Experimental Physics, Faculty of Physics, TU Dortmund University 2021–2025: President of Georg August University of Göttingen (on leave from TU Dortmund University) 2008–2020: Vice Rector for Research (3 years), for Studies (5 years), for Finance (4 years) at TU Dortmund University, permanent representative of the Rector 2003: Admitted as a full member of the North Rhine-Westphalian Academy of Sciences and Arts Since 2001: full professorship (C4) for experimental physics at TU Dortmund University. Chair of Experimental Physics I 1998 – 2001 Habilitation in experimental physics. Lecturer at Christian Albrechts University of Kiel 1994 – 1998: Research stays in the USA at Brookhaven National Laboratory (1994), Exxon Research Laboratories (1994), State University of New York at Stony Brook (1995 and 1998) and Argonne National Laboratory (1996 and 1997) 1990–1993: Research assistant, Institute for Experimental Physics, Christian Albrechts University of Kiel. Doctorate in physics (dissertation: “X-ray scattering on laterally structured surfaces – experiment and theory”) 1984–1989: Studied physics with a minor in mathematics, Christian Albrechts University of Kiel. Diploma in mathematical physics Awards: 2024 Culture Prize of the Eduard Rhein Foundation 2018 Awarded the Badge of Honor of the German Physical Society 2017 Robert Wichard Pohl Prize of the German Physical Society for outstanding contributions to physics 2013 Communicator Prize of the DFG and the Stifterverband der Deutschen Wissenschaft 2010 Awarded the Silver Badge of Honor for special services to the DESY Research Center in Hamburg 2010 Professor of the Year elected by magazine “UNICUM Beruf” in the field of natural sciences and medicinePopular Books: 5 books published, among them “Shaken, not stirred! – James Bond in the Spotlight of Physics” Springer (2020) (in German: “Geschüttelt, nicht gerührt! – James Bond im Visier der Physik”, Piper 2008)</li></ul></li></ul>

Plenary speakers at the 19th International Symposium on Hyphenated Techniques in Chromatography and Separation Technology (HTC-19)

Article

Product

Events

Application

Presentation

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

In 1936, the Laboratory Equipment Company introduced the first rapid carbon determinator for the American iron and steel industry.  Today, almost 80 years later, LECO is recognized globally as a leader in the development of high-quality analytical instrumentation, mass spectrometers, comprehensive two-dimensional chromatography, metallography & optical equipment as well as consumables.

LECO

The HTC symposium series started in 1990 and is the ideal meeting place for scientists and practitioners from academia and industry and vendors to discuss and gather new insights in emerging technologies, instrumentation, workflows, and applications. Organized under the auspices of the Vrije Universiteit Brussel (VUB), the Catholic University of Leuven (KU Leuven), Ghent University (UGhent), and the Separation Science Group of the Royal Society of Chemistry (RSC), HTC-19 is expected to gather over 300 participants.

International Symposium on Hyphenated Techniques in Chromatography and Separation Technology

Asecos Safety Storage Cabinet Q-CLASSIC-90 (Refurbished)

Safety cabinet Asecos Q90.195.090.FU.WDAS with 90-min fire resistance, robust triple-hinged doors, ventilation ports, lock system, and 3 shelves with collecting sump for compliant flammable storage.

Asecos Q90.195.060.FU.WDASR Type 90 cabinet with 90-min fire resistance, door arrest system, certified safety, DN75 ventilation, 3 shelves and 22 L sump for compliant flammable storage.

Asecos G90 Fire-Resistant Gas Cylinder Storage Cabinet – 1 × 50 L, Right-Hand Door (New)

The asecos G90 cabinet provides certified 90-minute fire protection for gas cylinders, integrated ventilation, and safe, ergonomic handling—ideal for laboratories and industrial environments.

Asecos G90 Fire-Resistant Gas Cylinder Storage Cabinet – 2 × 50 L, Right-Hand Door, Grey (New)

The asecos G90 cabinet provides certified 90-minute fire protection for two 50 L gas cylinders, combining safe ventilation, ergonomic handling, and compliance with EN 14470-2 for demanding laboratory and industrial applications.

Baker BioVanguard 6 Greenline Biosafety Cabinet (Tested)

Baker BioVanguard 6 Greenline Class II biosafety cabinet ensures operator, sample, and environmental protection with energy-efficient, ergonomic, and contamination-free operation.

Linde pressure regulator, CPLH0DJ-LIN572 (New)

Linde CPLH0DJ-LIN572 (C200/2-6BC) two-stage regulator provides stable 6 bar outlet pressure from 200 bar cylinders, ideal for high-purity gas control in GC, GC/MS, and lab systems.

Radleys Discovery Carousel 12 Reaction Station (Refurbished)

Radleys Discovery Carousel 12 enables uniform heating and stirring of 12 simultaneous reactions, ideal for parallel synthesis, optimization, and screening in R&D chemistry labs.

Marketplace products focused on Laboratory equipment - page 1

Related content

Plenary speakers at the 19th International Symposium on Hyphenated Techniques in Chromatography and Separation Technology (HTC-19)

As Helium Prices Rise and Supply Shrinks, LECO Customers Have Reliable Alternatives

News from LabRulezGCMS Library - Week 16, 2026