<p><strong>Our Library never stops expanding. What are the most recent contributions to LabRulezGCMS Library in the week of 6th April 2026? Check out new documents from the field of the gas phase, especially GC and GC/MS techniques!</strong></p><blockquote><p><span style="font-size:20px;">👉 </span><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library"><span style="font-size:20px;"><strong>SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT GCMS AND RELATED TECHNIQUES</strong></span></a></p></blockquote><blockquote><p><strong>👉 Need info about different analytical techniques?</strong> Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library"><strong>LabRulezLCMS</strong></a> or <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library"><strong>LabRulezICPMS</strong></a> libraries.</p></blockquote><p>This week we bring you application notes by <strong>Agilent Technologies, BaySpec, </strong>poster by <strong>MDCW / William &amp; Mary </strong>and<strong> </strong>brochure by<strong> Shimadzu!</strong></p><h3><strong>1. Agilent Technologies: High-Throughput BTEX Analysis in Nail Products by SPME and GC/TQ</strong></h3><p><strong>Minimal steps, maximum precision</strong></p><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_btex_analysis_nail_products_spme_gctq_5994_9009en_agilent_24ef32dd13.pdf"><strong>Full PDF for download</strong></a></li></ul><p>BTEX compounds—benzene, toluene, ethylbenzene, and xylenes—are volatile aromatic hydrocarbons widely used as solvents in industrial and consumer products. Among these, toluene is the most prevalent in nail polish formulations, where it serves as a solvent to dissolve resins and pigments, ensuring smooth application, uniform color dispersion, and rapid drying. Historically, these properties made toluene a preferred ingredient in nail coatings, including traditional polishes, gel formulations, and nail art products. However, its inclusion presents challenges for regulatory compliance and product reformulation. In response to these challenges, the California Department of Toxic Substances Control (DTSC) has listed nail products containing toluene as Priority Products under the Safer Consumer Products Regulations.1 Manufacturers selling such products in California must submit a Priority Product Notification and conduct an Alternative Analysis if toluene concentrations exceed the 100-ppm threshold.&nbsp;</p><p>To support compliance and ensure accurate monitoring of BTEX levels in nail products, robust analytical methods are essential. Solid phase microextraction (SPME) coupled with gas chromatography/triple quadrupole mass spectrometry (GC/TQ) has emerged as a preferred approach for volatile organic compound analysis due to its solvent-free sample preparation, high sensitivity, and compatibility with complex cosmetic matrices. The 8890 GC with 7000 Series GC/TQ offers enhanced detection capabilities through dynamic multiple reaction monitoring (dMRM), enabling precise quantification of BTEX compounds at trace levels, below regulatory thresholds. This platform provides the analytical rigor required for method validation, including limits of detection, recovery, and precision, ensuring compliance with California's stringent performance criteria and supporting industry efforts toward improving consumer product&nbsp;quality.&nbsp;</p><h4><strong>Experimental</strong></h4><h5><strong>GC/TQ analysis&nbsp;</strong></h5><p>Analyses were performed on an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=8890+GC"><strong>8890 GC</strong></a> coupled to a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=7000"><strong>7000 Series GC/TQ </strong></a>equipped with an EI extractor ion source (Figure 2). The instrument operating parameters are listed in Table 2. The system was operated in splitless mode with an inlet temperature of 200&nbsp;°C, a purge flow of 3 mL/min, and a purge flow to split vent of 50&nbsp;mL/min at 2&nbsp;minutes. Carrier gas was helium at a constant flow of 0.693&nbsp;mL/min with a total flow of 53.7 mL/min. The chromatographic separation was accomplished on an <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=10&amp;search=DB-624+Ultra+Inert+column"><strong>Agilent J&amp;W DB-624 Ultra Inert column</strong></a> (20&nbsp;m × 0.18&nbsp;mm, 1&nbsp;µm, part number 121-1324UI). The oven program started at 40&nbsp;°C (hold 2&nbsp;minutes), ramped at 35&nbsp;°C/min to 160&nbsp;°C, and held for 2.58&nbsp;minutes, giving a total run time of 8.0&nbsp;minutes. The transfer line was maintained at 230&nbsp;°C, with the ion source at 230&nbsp;°C and quadrupoles at 150&nbsp;°C.</p><h4><strong>Conclusion&nbsp;</strong></h4><p>A rapid, high-throughput headspace‑SPME GC/TQ method was developed for quantifying BTEX in nail product matrices, using a 100-µm PDMS Agilent Smart SPME fiber on an Agilent 8890 GC with Agilent 7000 Series GC/TQ. The method provides solvent-free extraction, 8-minute chromatographic runs, and an ~11-minute total cycle time, enabling high-throughput analysis with robust selectivity in dMRM mode. Quality control results demonstrated mean recoveries of 100 to 107% with RSDs ≤ 8%, meeting method acceptance criteria for compliance-focused testing for toluene. Integration of Smart SPME automation and the intelligent features of the 8890 GC and 7000 Series GC/TQ allows a practical, defensible solution for routine laboratories monitoring BTEX in nail products. Calibration performance showed high linearity and low variance across the working ranges, with all compounds meeting initial calibration criteria via R² ≥ 0.995 or average RF RSD ≤ 20%. Combined with the short cycle time and automated fiber tracking, this workflow is ideally suited for routine compliance testing of BTEX in nail products using the 8890 GC and 7000&nbsp;Series GC/TQ.</p><h3><strong>2. BaySpec: Detection of residual pesticides on fruits and vegetables using Portability miniature mass s pectrometer</strong></h3><ul><li>Application note</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Bay_Spec_App_Note_Portability_Pesticides_4a7311fb3e.pdf"><strong>Full PDF for download</strong></a></li></ul><p>Pesticides are used in a variety of different ways during the production of food. Ranging from preventing crop damage by insects, rodents and molds during growth to prolonging storage of food after harvest. Because of the frequent usage, the residual pesticides are often found in many agricultural products and their monitoring and control is an important step in achieving and maintaining overall food safety in the modern society.&nbsp;</p><p>Mass spectrometry in connection with different separation techniques currently represents the main analytical approach for determination of residual pesticides in food. Traditionally, samples need to be collected and send to a laboratory for analysis using techniques such as GC-MS or HPLC-MS, which are costly and time-consuming. In addition, the conventional mass spectrometry usually requires laborious sample pretreatment, which does not allow for immediate in-situ sample determination. Presented here is an application of Thermal Desorption ElectroSpray Ionization (TD-ESI) for pesticide screening coupled to a portable mass spectrometer.&nbsp;</p><p>TD-ESI is a mass spectrometry technique from the family of ambient ionization methods that utilizes very simple probing of different surfaces with no or limited sample pretreatment while it is still noted for its selective and sensitive detection capabilities. In TD-ESI a solid surface or a liquid sample is touched by a simple metallic probe that absorbs the analyte. The probe is then inserted into a heated tube and the desorbed analyte is carried by gas flow into an orthogonally mounted electrospray. The electrospraty plume extracts the analyte and further ionization and ion introduction follows the conventional electrospray mechanism.&nbsp;</p><p><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/2219"><strong>Bayspec’s Portability mass spectrometer</strong></a> is less than 10kg highly portable and battery operated linear ion trap mass spectrometer with atmospheric pressure inlet (API). When TD-ESI is combined with PortabilityTM then it is possible to perform fast in-field detection of analytes including residual pesticides, directly of the surfaces of fresh food products without any sample pre-treatment. Fast pesticide screening by Portability mass spectrometer can immediately disclose fake organic food products as well as to discover elevated levels of residual pesticides.&nbsp;</p><p>TD-ESI-MS was used to rapidly screen residual pesticides on the surfaces of different fruits and vegetables. Direct sampling probe was used to introduce analytes from surfaces of unprocessed samples. Due to short analysis times (1-5s a sample), the technique allows for fast screening for applications in food and environmental safety. MS (as well as MS/MS) analyses can be performed on surface-residual pesticides at ppm and sub-ppm levels. The miniaturized TD-ESI ion source compatible with Portability is available from BaySpec. This ion source mounts on the Portability front inlet and does not require any additional support, external power or gases. The simple intuitive software interface is operated by touch screen and makes the instrument extremely easy to control. The external TD-ESI source is fully integrated into the main software environment and the hyphenated system is thus very user-friendly, does not require excessive training and can be operated by persons with no previous mass spectrometry experiences.</p><h3><strong>3. MDCW / William &amp; Mary: Volatile Characterization of American Foulbrood Disease Using Comprehensive Two-Dimensional Gas Chromatography</strong></h3><ul><li>Poster</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/P_15_Christensen_39521e3391.pdf"><strong>Full PDF for download</strong></a></li></ul><p>American foulbrood (AFB) is a deadly disease spread by Paenibacillus larvae bacterial spores, targeting the brood stage of Apis mellifera honey bees. Broods perish in a matter of days after exposure to the spores, forming infected colloidal scales in the hive that adult bees cannot remove. 1,2 The spores are extremely persistent and resistant to typical treatment methods, which standardized the immediate euthanasia of bees and destruction of the hive and associated equipment by burning. 3 In an effort to expedite identification of the spores, scent-detection dogs have been trained for use in apiaries. Furthermore, gammairradiation has been tested as a proposed treatment method as it would offer a nondestructive alternative to sterilization.</p><p>The goals of this study were to use comprehensive two-dimensional gas chromatography – time-of-flight mass spectrometry (GC×GC-TOFMS) to characterize the volatiles associated with AFB disease for understanding scent detection and to measure the effectiveness of gamma-irradiation in sterilizing these volatiles.</p><h4><strong>Methods</strong></h4><p>Samples included blanks, material from healthy comb, aged unsterilized diseased scales, fresh unsterilized diseased scales, and diseased scales sterilized with the proposed treatment method of gamma-irradiation. These samples were stored in headspace vials (Figure 3) in the freezer when not in use. No sample preparation was required before injection with solidphase microextraction using the LPAL-3 (CTC Analytics).</p><p>Analysis was performed using a <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/37"><strong>Pegasus BT4D</strong></a> (LECO Corporation) according to the parameters described below in Table 1. <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/products/41"><strong>ChromaTOF software</strong></a> (LECO Corporation) was used to analyze the chromatographic data. Preliminary identifications were assigned to peaks using a minimum signal to noise of 200 and a minimum stick count of 3.</p><h4><strong>Conclusions</strong></h4><p>GC×GC-TOFMS can be used to distinguish the volatile profiles of A. mellifera samples at different stages of infection with AFB disease. Future Directions for Research:&nbsp;</p><ul><li>Discrimination of volatiles specific to AFB from non-specific volatiles&nbsp;</li><li>Characterization of AFB-specific volatiles for scent-detection purposes&nbsp;</li><li>Measurement of gamma-irradiation sterilization success in removing AFB volatiles</li></ul><h3><strong>4. Shimadzu: Screening System for Phthalate Esters, Brominated Flame Retardants and Other Regulated Substances Py-Screener Ver.3</strong></h3><ul><li>Brochure</li><li><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/c146_e507_45f041b0d7.pdf"><strong>Full PDF for download</strong></a></li></ul><p>The <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=Py-Screener"><strong>Py-Screener™ Ver. 3</strong></a> can screen for 7 types of phthalate esters and brominated flame retardants (PBBs, PBDEs), including substances regulated under the RoHS Directive. In addition, it can also test for PIP (3:1), which is regulated under the US TSCA (Toxic Substances Control Act), as well as UV-328, Dechlorane Plus (DP), and short-chain chlorinated paraffins (SCCPs) and medium-chain chlorinated paraffins (MCCPs), which are regulated under the Stockholm Convention (POPs Convention) on Persistent Organic Pollutants (POPs). These regulated compounds, thermally extracted from the sample by Pyrolysis-GC-MS (Py-GC-MS), are selectively detected and quantified. Py-Screener Ver. 3 consists of dedicated software for easy screening, special standard samples, and a sampling tool kit, making it simple to operate even for first-time users.</p><h5><strong>Shimadzu Corporation’s Solutions for Complying with International Hazardous Substance Regulations</strong></h5><p>When manufacturing and exporting products, it is necessary to comply with the chemical and hazardous substance regulations established by each country. Products contain many parts and use various materials and substances. Therefore, it is the manufacturer’s responsibility to manage the entire supply chain to ensure that harmful substances are not contained. Shimadzu Corporation provides analysis solutions that comply with these regulations.</p><h5><strong>Applicable Systems and Software</strong></h5><ul><li><strong>GC-MS: </strong><a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-QP2020+NX"><strong>GCMS-QP™2020 NX</strong></a>, <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-QP2020"><strong>GCMS-QP2020,</strong></a> <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMS-QP2010+Ultra"><strong>GCMS-QP2010 Ultra</strong></a></li><li><strong>Pyrolyzer:</strong> <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=42&amp;search=EGA%2FPY-3030D"><strong>EGA/PY-3030D</strong></a> multi-shot pyrolyzer</li><li><strong>Autosampler:</strong> AS-2020E, <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=42&amp;search=AS-1020E"><strong>AS-1020E auto-shot sampler&nbsp;</strong></a></li><li><strong>GC-MS Workstation:</strong> <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=GCMSsolution"><strong>GCMSsolution</strong></a>™ (Ver. 4.60SP2 or later) + <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library?mainauthorItems=1&amp;search=LabSolutions+Insight"><strong>LabSolutions Insight</strong></a>™ (Ver. 5.0 or later)</li><li><strong>Py Workstation:</strong> EGA-PY3030 program (Ver. 1.54 or later)</li></ul>

News from LabRulezGCMS Library - Week 15, 2026

Microplastics and Nanomaterials: Understanding Emerging Contaminants in Environmental Testing

<div><div><div><p><strong>Our immune system is incredibly powerful: among other things, it can recognize and destroy cancer cells. But tumors can be just as effective at avoiding detection – they build “invisibility shields” to protect themselves from attack.</strong></p></div></div><div><p>One breakthrough in cancer therapy has been immune checkpoint inhibitors (ICIs), drugs that reactivate immune T cells and help them fight tumors again. However, only about 20–50% of patients respond well to this treatment. Researchers are therefore seeking alternative therapeutic strategies. A small and well-known molecule called adenosine plays a key role in these efforts.</p><p>When tumor cells are stressed or dying, they release ATP, which is normally a signal that something is wrong in the tissue. But in the tumor microenvironment, ATP gets rapidly broken down by two enzymes, CD39 and CD73. Released adenosine acts like a chemical “calm-down” signal, binds to immune cells (T cells, NK cells, and others), and tells them to slow down, reducing their ability to kill cancer cells. Targeting CD73 therefore represents a promising strategy for developing new cancer treatments.</p></div><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/UOCHB_Nove_latky_mohou_podporit_imunitni_system_v_boji_s_rakovinou_88c5e82cd5.jpeg" alt="IOCB Prague: Development of potent inhibitors to boost the immune system's ability to fight cancer" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_UOCHB_Nove_latky_mohou_podporit_imunitni_system_v_boji_s_rakovinou_88c5e82cd5.jpeg 245w," sizes="100vw" width="661" height="363"></p><p>At IOCB Prague, interdisciplinary teams led by Jan Řezáč, Jan Konvalinka, and Michal Hocek used a newly developed high-throughput screening method to test over 5,000 compounds, identifying two ribonucleoside derivatives as promising CD73 inhibitors.</p><p>The scientists then improved the compounds’ activity by carefully modifying the ribonucleoside scaffold with bulky (het)aryl groups. Further optimization improved the pharmacokinetic properties of these compounds, yielding inhibitors with low clearance, long half-life, high solubility, and strong selectivity over related enzymes such as CD39.</p><p>In cellular experiments, the compounds reduced adenosine production in cancer cells, restored T cell activation, and showed no toxicity toward human fibroblasts. The most active compound showed a single-digit picomolar inhibition constant (Ki).</p><p>These findings establish a strong foundation for further in vivo efficacy and combination studies, which will explore the therapeutic potential of this novel inhibitor class.</p><blockquote><h4><strong>The Original article</strong></h4><h4><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsptsci.5c00707"><strong>Potent Competitive Inhibitors of Ecto-5′-nucleotidase (CD73) based on 6-(Het)aryl-7-deazapurine Ribonucleoside 5′-O-Bisphosphonates</strong></a></h4><p>Ugnė Šinkevičiu̅tė, Magdalena Šímová, Radek Staník, Lenka Poštová Slavětínská, Kristýna Blažková, Pavel Šácha, Martin Lepšík, Jan Řezáč, Jan Konvalinka, Tereza Ormsby, Michal Tichý, Michal Hocek</p><p><i><span><strong>ACS Pharmacol. Transl. Sci.</strong></span></i><strong> </strong><span><strong>2026, 9, 1, 191–213</strong></span></p><p><a target="_blank" rel="noopener noreferrer" href="https://pubs.acs.org/doi/10.1021/acsptsci.5c00707">https://pubs.acs.org/doi/10.1021/acsptsci.5c00707</a></p><h6>licensed under <a target="_blank" rel="noopener noreferrer" href="https://creativecommons.org/licenses/by/4.0/"><strong>CC-BY 4.0</strong></a></h6></blockquote><h4><strong>Abstract</strong></h4><p>CD73 generates immunosuppressive adenosine in the tumor microenvironment and is a promising target for cancer immunotherapy. We have designed and systematically studied diverse 2-substituted 7-deazapurine ribonucleoside 5′-<i>O</i>-bisphosphonates bearing a variety of (het)aryl groups at position 6 and discovered their highly potent and selective CD73 inhibition activity. The most active compounds (with single-digit picomolar <i>K</i><sub>i</sub>) contained bicyclic (het)aryl groups at position 6 in combination with chlorine at position 2. Further optimization of pharmacokinetic properties identified inhibitors with low clearance, long half-life, high solubility, and excellent selectivity over CD39 and NTPDase3. They effectively suppressed adenosine formation in MDA-MB-231 cells, rescued CD8<sup>+</sup> T cell activation, and were nontoxic to human fibroblasts. Overall, their profile compares favorably with <strong>AB680</strong>, a CD73 inhibitor currently in phase I/II clinical trials.</p></div>

Development of potent inhibitors to boost the immune system's ability to fight cancer

Article

Application

Environment

Scientific article

Science and research

Poster

The Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences (IOCB Prague) is a leading scientific institution in the Czech Republic, recognized internationally. Its primary mission is basic research in the fields of chemical biology and medicinal chemistry, organic and material oriented chemistry, chemistry of natural compounds, biochemistry and molecular biology, physical chemistry, theoretical chemistry, and analytical chemistry. 

Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Organomation, founded in 1959, designs and manufactures high-quality nitrogen evaporators and extraction systems. Known for innovation and durability, their lab instruments are used globally for efficient sample preparation with strong customer support.

Organomation

Thermo Scientific QuEChERS Sample Preparation Kits

QuEChERS is a versatile sample preparation method for analyzing pesticides, veterinary drugs, and other residues in various sample types before GC-MS or LC-MS analysis.

<div><div><div><h3><strong>QuEChERS sample preparation—now easier, more convenient, and affordable</strong></h3><p><strong>QuEChERS</strong> (<strong><u>Q</u></strong><u>u</u>ick, <strong><u>E</u></strong>asy, <strong><u>C</u></strong>heap, <strong><u>E</u></strong>ffective, <strong><u>R</u></strong>ugged, and <strong><u>S</u></strong>afe)is a <strong>sample preparation method</strong> that was initially developed in 2003 for <strong>analyzing veterinary drugs in food</strong>. The method was also tested for <strong>pesticide residue analysis in plant material</strong> with great success. In 2003, the <strong>detailed method was published</strong> in the journal AOAC International. Since then, the QuEChERS method has evolved into a <strong>sample preparation technique used on a variety of analytes</strong> in an <strong>expanding number of sample types</strong> before analysis by <a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/mass-spectrometry/gas-chromatography-mass-spectrometry-gc-ms.html"><strong>GC-MS</strong></a><strong> or </strong><a target="_blank" rel="noopener noreferrer" href="https://www.thermofisher.com/cz/en/home/industrial/mass-spectrometry/liquid-chromatography-mass-spectrometry-lc-ms.html"><strong>LC-MS</strong></a>.</p><p><strong>Thermo Scientific QuEChERS kits</strong> contain <strong>pre-packaged, ready-weighed salts, sorbents, and buffers</strong> to <strong>streamline your workflow</strong> and <strong>minimize the potential for error</strong>. The kits are grouped according to your <strong>analytes of interest</strong>, <strong>sample matrix</strong>, and <strong>preferred QuEChERS method</strong>:</p><ul><li><strong>Original 2003 Method</strong></li><li><strong>AOAC 2007.01 Method</strong></li><li><strong>EN 15662 Method</strong></li><li><strong>NY/T 1380-2007 Method</strong></li></ul><p><strong>Complete packages</strong>—including both <strong>extraction and clean-up kits</strong>—are available. <strong>Extraction-only and cleanup-only kits</strong> are also offered to suit your laboratory’s sample preparation needs. These <strong>pre-packaged kits save time and money</strong>, make QuEChERS procedures <strong>easier and more convenient</strong>, and ensure <strong>quality to yield reproducible results</strong> and <strong>excellent recoveries</strong> for a wide variety of analytes.</p><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_2_1e99f0c81b.jpg" alt="Thermo Scientific QuEChERS Sample Preparation Kits" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_2_1e99f0c81b.jpg 217w," sizes="100vw" width="891" height="640"></p><h3><strong>Typical QuEChERS workflow</strong></h3><div><div><div><div><div><p>As shown in the workflow diagram below, the <strong>QuEChERS method has four basic steps</strong>:</p><ol><li><strong>Homogenize sample</strong> (fruit or vegetable)</li><li><strong>Extract analytes of interest</strong> from a sample using <strong>extraction salts</strong> (pesticide residues, veterinary drugs, and/or mycotoxins)</li><li><strong>Clean-up the resulting supernatant</strong> using <strong>dispersive solid phase extraction (dSPE)</strong></li><li><strong>Analyze by GC-MS or LC-MS</strong></li></ol><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_496491ceff.jpeg" alt="Thermo Scientific QuEChERS Sample Preparation Kits" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_496491ceff.jpeg 245w," sizes="100vw" width="1170" height="706"></p><div><h3><strong>QuEChERS products</strong></h3></div><div><h4><strong>QuEChERS extraction kits for original 2003 method</strong></h4></div><div><p>The <strong>original QuEChERS method</strong> (Anastassiades et al, 2003) was developed by <strong>Steven J. Lehotay and Michelangelo Anastassiades</strong> in 2003 for the <strong>determination of pesticide residues in fruits and vegetables</strong>. The original method was created to <strong>analyze non-base-sensitive compounds</strong> and uses a <strong>sodium chloride buffer</strong> to <strong>reduce polar interferences</strong> and <strong>enhance extraction</strong>. <strong>Buffering</strong> is an important part of the QuEChERS procedure because it <strong>allows for analysis of pesticides and other residues</strong> that display <strong>pH dependence in their recoveries</strong>, depending on the <strong>sample matrix</strong>. <strong>Three different extraction kits</strong> are available to support the <strong>original 2003 QuEChERS method</strong>.</p><h5><strong>Chemicals used in the original 2003 method</strong></h5></div><ul><li><strong>Acetonitrile:</strong> Used to perform single-phase extraction (SPE) on a sample</li><li><strong>Anhydrous MgSO₄:</strong> Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes remaining water from sample during dispersive solid phase extraction (dSPE) step</li><li><strong>NaCl:</strong> Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes residual water from sample; reduces polar interference and enhances extraction</li><li><strong>PSA:</strong> Primary secondary amine, used to remove polar matrix components, citric co-extractives, and free fatty acids, from sample during dispersive solid phase extraction (dSPE) step</li></ul><div><h4><strong>QuEChERS extraction and clean-up kits for AOAC 2007.01 method</strong></h4><p>The <strong>AOAC 2007.01 QuEChERS Method</strong> was developed by <strong>Steven J. Lehotay and his co-workers</strong>, who <strong>modified the original 2003 method</strong> to accommodate the use of <strong>acetate buffering at higher concentration</strong> for <strong>greater buffering strength</strong>. <strong>Buffering</strong> is an important part of the QuEChERS procedure because it <strong>allows for analysis of pesticides and other residues</strong> that display <strong>pH dependence in their recoveries</strong>, depending on the <strong>sample matrix</strong>. These <strong>extraction and clean-up products</strong> here support the <strong>AOAC 2007.01 method</strong>.</p><div><h5><strong>Chemicals used in the AOAC 2007.01 method</strong></h5><ul><li><strong>Acetonitrile:</strong> Used to perform single-phase extraction on a sample</li><li><strong>Anhydrous MgSO₄:</strong> Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes remaining water from sample during dispersive solid phase extraction (dSPE) step</li><li><strong>NaOAc:</strong> Buffers the sample to stabilize pH</li><li><strong>PSA:</strong> Primary secondary amine, used to remove polar matrix components, citric co-extractives, and free fatty acids, from sample during dispersive solid phase extraction (dSPE) step</li><li><strong>C18:</strong> Removes fats, sterols, and other non-polar interferences from sample</li><li><strong>GCB:</strong> Graphitized carbon black, removes pigment (<i>not recommended for use with planar pesticides</i>)</li></ul><div><h4><strong>QuEChERS extraction and clean-up kits for EN 15662 method</strong></h4><p>The <strong>extraction and clean-up products</strong> here support the <strong>EN 15662 method</strong>. <strong>Widely used in Europe</strong>, the EN 15662 method was developed by <strong>Michelangelo Anastassiades and co-workers</strong>, who <strong>modified the original 2003 method</strong> to accommodate the use of <strong>citrate buffering at a relatively low buffering capacity</strong>. This variation uses a <strong>sodium chloride buffer</strong> to <strong>minimize polar interferences</strong> in addition to <strong>sodium citrate dihydrate</strong> and <strong>disodium citrate sesquihydrate buffers</strong>. <strong>Buffering</strong> is an important part of the QuEChERS procedure because it <strong>allows for analysis of pesticides and other residues</strong> that display <strong>pH dependence in their recoveries</strong>, depending on the <strong>sample matrix</strong>.</p><h5><strong>Chemicals used in the EN 15662 method</strong></h5><ul><li><strong>Acetonitrile:</strong> Used to perform single-phase extraction on a sample</li><li><strong>Anhydrous MgSO₄:</strong> Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes remaining water from sample during dispersive solid phase extraction (dSPE) step</li><li><strong>NaCl:</strong> Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes residual water from sample</li><li><strong>Trisodium Citrate:</strong> Buffers the sample to stabilize pH</li><li><strong>Disodium Citrate Sesquihydrate:</strong> Buffers the sample to stabilize pH</li><li><strong>PSA:</strong> Primary secondary amine, used to remove polar matrix components, citric co-extractives, and free fatty acids, from sample during dispersive solid phase extraction (dSPE) step</li><li><strong>C18:</strong> Removes fats, sterols, and other non-polar interferences from sample</li><li><strong>GCB:</strong> Graphitized carbon black, removes pigment (<i>not recommended for use with planar pesticides</i>)</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_3_721562526f.jpg" alt="Thermo Scientific QuEChERS Sample Preparation Kits" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Qu_E_Ch_ERS_Sample_Preparation_Kits_3_721562526f.jpg 245w," sizes="100vw" width="1471" height="488"></p><div><h4><strong>QuEChERS clean-up kit for NY/T 1380-2007 method</strong></h4></div><div><p>The <strong>NY/T 1380-2007 method</strong> is <strong>recommended by China Ministry of Agriculture</strong> for the <strong>QuEChERS Method sample preparation</strong> of <strong>51 specific pesticide residues</strong> in <strong>fruits and vegetables</strong> with <strong>analysis by GC-MS</strong>.</p><h5><strong>Chemicals used in the NY/T 1380-2007 method</strong></h5><ul><li><strong>Anhydrous MgSO₄:</strong> Induces phase separation between water content in sample and acetonitrile layer during liquid-liquid partitioning step; removes remaining water from sample during dispersive solid phase extraction (dSPE) step</li><li><strong>PSA:</strong> Primary secondary amine, used to remove polar matrix components, citric co-extractives, and free fatty acids, from sample during dSPE step</li><li><strong>C18:</strong> Removes fats, sterols, and other non-polar interferences from sample</li></ul></div></div></div></div></div></div></div></div></div></div></div></div>

Thermo Scientific Dionex AutoTrace 280 Solid-Phase Extraction Instrument

Extract analytes of interest from large volume aqueous samples easily and efficiently with the Thermo Scientific™ Dionex™ AutoTrace™ 280 Solid-Phase Extraction (SPE) Instrument.

<p><strong>Extract analytes of interest from large volume aqueous samples easily and efficiently with the Thermo Scientific™ Dionex™ AutoTrace™ 280 Solid-Phase Extraction (SPE) Instrument.&nbsp;</strong></p><p>The AutoTrace 280 automates all four steps of SPE (conditioning, loading, rinsing, and eluting), reducing solvent consumption and improving recovery and reproducibility. Boost productivity and reduce cost of analysis by simultaneously processing up to six samples in 2-3 hours with only 15 minutes of operator involvement. The AutoTrace 280 meets requirements in US EPA methods including the 500 and 600 series.</p><h5><strong>Improved reliability and recovery</strong></h5><ul><li>Automated SPE minimizes operator intervention</li><li>Positive pressure loading and elution of samples and solvents provide constant flow for improved analytical precision</li></ul><h5><strong>Flexibility in operation</strong></h5><ul><li>Loads sample volumes from 20 mL to 4 L</li><li>Compatible with 1, 3, and 6 mL cartridges and with 47 mm SPE disks</li><li>Automatically conditions, rinses, and elutes SPE cartridges with a choice of five solvents</li><li>Offers a choice of six different collection vial racks</li></ul><h5><strong>Improved laboratory safety</strong></h5><ul><li>Minimal sample handling reduces operator exposure to hazardous chemicals</li><li>No hood required</li></ul><h5><strong>Enhanced laboratory productivity and reduced costs</strong></h5><ul><li>Unattended operation</li><li>Batch processing of up to 6 samples</li><li>Reduced solvent usage</li><li>Segregates aqueous and solvent waste using separate waste lines for efficient, cost-effective waste handling</li></ul><h5><strong>Supports a range of matrices and applications</strong></h5><ul><li>Ability to process samples containing suspended solids</li><li>Meets requirements for solid-phase extraction for U.S. EPA methods including 500 and 600 series</li></ul><h5><strong>Recommended use</strong></h5><ul><li>Analyze prepared samples with Thermo Scientific LC or GC systems for a fully integrated workflow</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Instrument Type:</strong> Automated Solid Phase Extraction (SPE) System</li><li><strong>Application:</strong> For use with 47 mm SPE disks</li><li><strong>Model Description:</strong> AutoTrace 280 SPE System</li></ul><h5><strong>Performance &amp; Operating Details</strong></h5><ul><li><strong>Disk Compatibility:</strong> Designed for 47 mm SPE disks</li><li><strong>Pressure Range:</strong><ul><li>Output: 0 to 30 psi (0 to 1.4 bar)</li><li>Input: Up to 100 psi (6.9 bar) maximum</li></ul></li><li><strong>Voltage:</strong> 100–240 V ±10%</li><li><strong>Frequency:</strong> 47–63 Hz</li></ul><h5><strong>Physical Specifications</strong></h5><ul><li><strong>Dimensions (D × W × H):</strong> 57 × 63.5 × 69 cm</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific EXTREVA ASE Accelerated Solvent Extractor

Achieve true walkaway sample-to-vial sample preparation with the Thermo Scientific™ EXTREVA™ ASE™ Accelerated Solvent Extractor. 

<p><strong>Achieve true walkaway sample-to-vial sample preparation with the Thermo Scientific™ EXTREVA™ ASE™ Accelerated Solvent Extractor. Without any intervention, perform sample extraction, in-cell cleanup and evaporation—all in one seamless operation—reducing manual labor from hours to minutes and enabling you to focus on other lab priorities while using up to 50% less solvent than other sample preparation techniques.</strong></p><p><strong>Accelerate your journey from sample to vial</strong></p><h5><strong>The EXTREVA ASE Accelerated Solvent Extractor offers:</strong></h5><ul><li><strong>All-in-one sample preparation.</strong> The EXTREVA ASE system automatically extracts and concentrates samples, eliminating the need to manually move sample extracts to another device for solvent evaporation.</li><li><strong>A walk-away solution. </strong>The system minimizes hands-on sample preparation tasks, enabling staff to accomplish other tasks.</li><li><strong>Parallel extraction. </strong>One EXTREVA ASE system can perform four parallel sample extractions, substantially increasing throughput.</li><li><strong>Gas-assisted extraction. </strong>The dynamic gas-assisted extraction mode reduces solvent consumption to between 5 and 100 milliliters per sample in most cases.</li><li><strong>Automation. </strong>Full automation improves recoveries and reproducibility while reducing training needs. Unlike humans, automated systems are ideal for performing the same tedious task repeatedly, and they don’t make mistakes.</li><li><strong>Method flexibility and optimization</strong>. Up to six different solvents can be used, including wash solvents for cleaning between methods. Precise flow control optimizes methods.</li><li><strong>Barcode-reading.</strong> The system tracks sample information and preparation parameters using a 2-D bar code reader to facilitate tracking and integrity. Data is recorded on the instrument or Thermo Scientific™ <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/products/76"><strong>Chromeleon™ Chromatography Data System (CDS) software</strong></a>.</li></ul><h4><strong>Specifications</strong></h4><ul><li><strong>Instrument Type:</strong> Automated Sample Preparation System</li><li><strong>Application:</strong> Simultaneous sample extraction and concentration</li><li><strong>Model Description:</strong> EXTREVA ASE Extraction and Evaporation System</li></ul><h5><strong>Performance &amp; Capabilities</strong></h5><ul><li><strong>Extraction Temperature Range:</strong> 40–200 °C</li><li><strong>Evaporation Temperature Range:</strong> 40–100 °C</li><li><strong>Compatible Solvents:</strong> Wide range of organic and aqueous solvents</li><li><strong>Pressure Capability:</strong> Up to 200 psi</li><li><strong>Power Consumption:</strong> 2000 W</li><li><strong>Frequency:</strong> 50/60 Hz</li></ul><h5><strong>Sample &amp; Solvent Handling</strong></h5><ul><li><strong>Extraction Cells (stainless steel):</strong> 1, 5, 10, 22, 34, 66, 100 mL</li><li><strong>Extraction Cell Tray:</strong> 16-position with 1 rinse</li><li><strong>Collection Vials:</strong><ul><li>60 mL and 100 mL evaporation vials</li><li>250 mL evaporation bottles</li><li>Direct concentrate to 2 mL sample vials with rinse capability</li></ul></li><li><strong>Collection Vial Tray:</strong> 16-position tray insert for 60 mL vials and 250 mL bottles; includes 4 rinse positions</li></ul><h5><strong>Utilities &amp; Requirements</strong></h5><ul><li><strong>Pneumatic Requirements:</strong><ul><li>Air: 130–140 psi</li><li>Nitrogen: 350–450 psi</li></ul></li></ul><h5><strong>Physical Specifications</strong></h5><ul><li><strong>Dimensions (D × W × H):</strong> 65.2 × 100 × 88.6 cm (25.6 × 39.4 × 34.8 in.)</li><li><strong>Weight:</strong> 160 kg (353 lb)</li><li><strong>Unit Size:</strong> Each</li></ul>

Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor

Save time, reduce solvent consumption, and boost productivity with Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor.

<div><p><strong>Automate extraction, filtration and clean up of compounds from solid and semisolid samples in minutes using the automated Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor. This system accommodates sample sizes of 1-100g, allows unattended extraction of up to 24 samples and uses 50 to 90% less solvent compared to other methods.&nbsp;</strong></p><p>The chemically inert pathway supports acid and alkaline sample matrices and solvents. Flexible, easy-to-operate and cost-effective, the Dionex ASE 350 is ideally suited for high-throughput laboratories and for a wide variety of applications.</p><div><h4><strong>Rapid and efficient extractions</strong></h4><ul><li>Elevated temperature (up to 200°C) and pressure (1500psi) reduce extraction times and solvent consumption</li><li>Fast pump (70mL/min.) enables fast extractions (typically 12-20 minutes)</li><li>Specialized oven design ensures precise temperature control for excellent reproducibility</li><li>Integrated solvent controller allows mixing and delivery of up to three solvents</li><li>The <strong>Thermo Scientific™ SmartRun™ System</strong> ensures cell size and collection vessel size are matched for an optimal extraction</li></ul><h4><strong>Enhanced flexibility to support multiple applications</strong></h4><ul><li>System accommodates <strong>1, 5, 10, 22, 34, 66 </strong>and <strong>100mL cell sizes</strong></li><li>pH-hardened pathway with <strong>Thermo Scientific™ Dionium™ components and cell</strong> enables compatibility with acid or alkaline pretreated matrices</li></ul><h4><strong>Dramatically reduced solvent consumption</strong></h4><ul><li>Requires less than 50mL solvent for a 20g sample</li><li>Includes solvent saver mode for further solvent savings</li></ul><h4><strong>Enhanced laboratory productivity</strong></h4><ul><li>System holds up to 24 samples for unattended operation</li><li>Flow-through technology allows in-line filtration and in-cell cleanup</li></ul><p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Thermo_Scientific_Dionex_ASE_350_system_2_9426ff3f9a/Thermo-Scientific-Dionex-ASE-350-system_2.jpg" alt="Thermo Scientific™ Dionex™ ASE™ 350 Accelerated Solvent Extractor" srcset="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/thumbnail_Thermo_Scientific_Dionex_ASE_350_system_2_9426ff3f9a/thumbnail_Thermo-Scientific-Dionex-ASE-350-system_2.jpg 114w," sizes="100vw" width="579" height="792"></p><h3><strong>🛠️ Specifications</strong></h3><ul><li><strong>Collection Vial Tray</strong>: 26-position tray insert for 60 mL vials; 19-position tray insert for 250 mL bottles</li><li><strong>Depth (English)</strong>: 27.3 in.</li><li><strong>Depth (Metric)</strong>: 69.3 cm</li><li><strong>Description</strong>: Extractor Only</li><li><strong>Extraction Fluids</strong>: Compatible with a wide range of organic and aqueous solvents</li><li><strong>Fluid Sensors</strong>: IR</li><li><strong>Frequency</strong>: 50/60 Hz</li><li><strong>Height (English)</strong>: 24.3 in.</li><li><strong>Height (Metric)</strong>: 61.7 cm</li><li><strong>Pneumatic Requirements</strong>: Air at 400–827 kPa (60–120 psi); N2 (at 1034 ×–1340 kPa (150–200 psi))</li><li><strong>Power Consumption</strong>: 500 Max VA</li><li><strong>Pressure</strong>: 10 MPa (1500 psi)</li><li><strong>Pump Flow</strong>: 70 mL/min</li><li><strong>Temperature Control</strong>: Up to 200 °C</li><li><strong>Weight (English)</strong>: 140 lb.</li><li><strong>Weight (Metric)</strong>: 65 kg</li><li><strong>Width (English)</strong>: 26.5 in.</li><li><strong>Width (Metric)</strong>: 67.3 cm</li><li><strong>Collection Vials</strong>: 60, 250 mL</li><li><strong>Dimensions (D x W x H)</strong>: 69.3 x 67.3 x 61.7 cm</li><li><strong>Extraction Cell Tray</strong>: 24 Cell, 2 Rinse</li><li><strong>Extraction Cells</strong>: 1, 5, 10, 22, 34, 66, 100 mL</li><li><strong>For Use With (Equipment)</strong>: Dionex ASE 350</li><li><strong>Type</strong>: Dionex ASE 350 System</li><li><strong>Unit Size</strong>: Each</li></ul></div></div>

Products focused on Sample Preparation from Thermo Fisher Scientific distributed by Thermo Fisher Scientific (EMEA) - page 1

Related content

Development of potent inhibitors to boost the immune system's ability to fight cancer

Microplastics and Nanomaterials: Understanding Emerging Contaminants in Environmental Testing

News from LabRulezGCMS Library - Week 15, 2026