GCMS
More information
WebinarsAbout usContact usTerms of use
LabRulez s.r.o. All rights reserved. Content available under a CC BY-SA 4.0 Attribution-ShareAlike

Using Alternative Carrier Gas for US EPA 524.3

Applications | 2013 | Teledyne LABSInstrumentation
GC/MSD, Purge and Trap, GC/SQ
Industries
Environmental
Manufacturer
Thermo Fisher Scientific, Teledyne LABS

Summary

Importance of the Topic


Ensuring safe drinking water requires reliable detection of volatile organic compounds (VOCs) at trace levels. USEPA Method 524.3 is a key protocol for measuring purgeable organics by capillary GC/MS. Due to increasing helium shortages and cost, investigating renewable carrier and purge gases is critical for sustainable, cost-effective laboratory operations.

Objectives and Study Overview


This study examines the feasibility of replacing helium with hydrogen as carrier gas and nitrogen as purge gas for EPA Method 524.3. Key goals include evaluating calibration linearity, precision, accuracy, and mass spectrometer tuning under alternative gases using the Atomx multimatrix autosampler coupled to a TRACE 1310 GC/MS.

Instrumentation Used


  • Teledyne Tekmar Atomx Multimatrix Autosampler (purge-and-trap concentrator with 80-position vial autosampler)
  • Thermo Scientific TRACE 1310 gas chromatograph with ISQ mass spectrometer
  • Rtx-VMS capillary column (20 m × 0.18 mm × 1 µm)
  • Hydrogen carrier gas at 0.8 mL/min, 5 psi split; nitrogen purge gas

Methodology


Calibration standards (0.5 to 50 ppb) were prepared in reagent water with ascorbic and maleic acids and analyzed according to Method 524.3. A weighted quadratic regression was applied, targeting r² ≥ 0.995. Precision and accuracy were assessed on eight replicates at the 10 ppb midpoint. 4-Bromofluorobenzene (BFB) tune checks ensured MS performance under hydrogen.

Main Results and Discussion


Calibration curves for over 60 VOCs met the linearity requirement (r² between 0.996 and 0.999). Precision (%RSD) at 10 ppb was generally below 15%, and average accuracy deviations fell within ±15% for most analytes. The lowest point (0.5 ppb) remained within ±50% tolerance. BFB ion-ratio criteria were satisfied, confirming robust MS tuning with hydrogen carrier gas. Overall performance was comparable to helium-based runs.

Benefits and Practical Applications


  • Reduced operating costs through in-house hydrogen and nitrogen generation
  • Lower environmental impact by conserving nonrenewable helium
  • Enhanced sample throughput via automated Atomx prep and self-loading
  • Straightforward retrofit of existing GC/MS systems

Future Trends and Applications


Further validation for a broader range of analytes and matrices will strengthen regulatory acceptance. Integration of on-site hydrogen/nitrogen generators can improve lab sustainability. Method updates and guidance are anticipated to include alternative gases in official protocols.

Conclusion


The combination of hydrogen carrier gas and nitrogen purge gas with the Atomx/TRACE 1310 GC/MS meets all performance requirements of USEPA Method 524.3. This approach offers a reliable, cost-effective, and environmentally friendly alternative to helium.

References


  • USEPA Method 524.3, Measurement of Purgeable Organic Compounds in Water by Capillary Column GC/MS, U.S. EPA Office of Ground Water and Drinking Water, 2009.

Content was automatically generated from an orignal PDF document using AI and may contain inaccuracies.

Downloadable PDF for viewing
 

Similar PDF

Toggle
USEPA Method 524.4 Using the Teledyne Tekmar Atomx and Thermo Scientific™ GC/MS System with New Helium Saver Module
USEPA Method 524.4 Using the Teledyne Tekmar Atomx and Thermo Scientific™ GC/MS System with New Helium Saver Module Application Note Roger Bardsley, Applications Chemist; Teledyne Tekmar P a g e |1 Abstract Increasing concerns over the availability of helium, and…
Key words
temp, tempbake, bakepurge, purgerinse, rinsetert, tertsweep, sweepether, etherdesorb, desorbcondensate, condensateatomx, atomxrinses, rinsestime, timesample, samplebutylbenzene, butylbenzenemethanol
US EPA Method 524.3 - Atomx XYZ and Agilent 7890B GC/5977A MS
APPLICATION NOTE: TECHNOLOGY: INDUSTRY: AN1802 P+T VOC ENV US EPA Method 524.3 - Atomx XYZ and Agilent 7890B GC/5977A MS Amy Nutter, Applications Chemist; Teledyne Tekmar P a g e |1 Abstract US EPA Method 524.3 was used to determine…
Key words
temp, tempbake, bakepurge, purgerinse, rinselpir, lpirupir, upirtert, tertsweep, sweepether, etheratomx, atomxdesorb, desorbprecision, precisionmrl, mrlaccuracy, accuracytable
US EPA Method 524.3 with the Teledyne Tekmar Atomx XYZ and Thermo Scientific™ TRACE™ 1310 GC and ISQ™ 7000 MS with an Advanced Electron Ionization (AEI) Source
APPLICATION NOTE: TECHNOLOGY: INDUSTRY: AN1805 P+T VOC ENV US EPA Method 524.3 with the Teledyne Tekmar Atomx XYZ and Thermo Scientific™ TRACE™ 1310 GC and ISQ™ 7000 MS with an Advanced Electron Ionization (AEI) Source Amy Nutter, Applications Chemist; Teledyne…
Key words
temp, tempbake, bakepurge, purgerinse, rinselpir, lpirupir, upiraccuracy, accuracytert, tertsweep, sweepmidpoint, midpointether, etheratomx, atomxdesorb, desorbtime, timeprecision
US EPA Method 524.3 with the Teledyne Tekmar Atomx XYZ and the Thermo Scientific™ TRACE™ 1310 GC and ISQ™ LT MS System
APPLICATION NOTE: TECHNOLOGY: INDUSTRY: AN1907 P+T VOC ENV US EPA Method 524.3 with the Teledyne Tekmar Atomx XYZ and the Thermo Scientific™ TRACE™ 1310 GC and ISQ™ LT MS System Amy Nutter, Applications Chemist; Teledyne Tekmar P a g e…
Key words
temp, tempbake, bakepurge, purgerinse, rinselpir, lpirupir, upirtert, tertsweep, sweepxyz, xyzether, etheratomx, atomxdesorb, desorbprecision, precisionmrl, mrlaccuracy
Other projects
LCMS
ICPMS
Follow us
More information
WebinarsAbout usContact usTerms of use
LabRulez s.r.o. All rights reserved. Content available under a CC BY-SA 4.0 Attribution-ShareAlike