Agilent 7000 GC/QQQ (Refurbished)

The Agilent 7000 Series Triple Quadrupole GC/MS (GC/QQQ) is a high-performance analytical instrument designed for complex trace-level analysis. It combines a gas chromatograph (GC) with a triple quadrupole mass spectrometer (MS/MS), enabling highly selective and sensitive measurements. This system is renowned for its ability to perform Multiple Reaction Monitoring (MRM), a targeted analysis method where specific precursor and product ions are detected to enhance selectivity and sensitivity for trace components.

Key Features:

• Triple Quadrupole Mass Spectrometer: Provides high sensitivity and selectivity for accurate mass measurements.
• EI inert or HydroInert Source: Optimized for use with hydrogen as a carrier gas, reducing disruptions from helium shortages.
• SWARM Technology: Advanced tuning algorithm for faster and more accurate method development.
• Early Maintenance Feedback (EMF): Integrated diagnostics to detect and alert potential issues early.
• Integrated Software: Compatible with Agilent MassHunter Workstation Software for comprehensive data management.

Technical Specifications:

MS

• Mass Range:
  • Standard: 2 to 1,050 amu
• Ionization Sources:
  • Electron Ionization (EI) (standard): 70 eV ionization energy
  • Optional Ionization: Positive Chemical Ionization (PCI), Negative Chemical Ionization (NCI)
• Scan Rate:
  • Up to 6,250 - 12,500 amu/sec for ultra-fast data acquisition
• Resolution:
  • Unit mass resolution on both Q1 and Q3, ensuring high selectivity
• Sensitivity (EI Mode):
  • MRM Mode:
    • IDL 12 fg OFN for 100 fg on column injection and for the transition m/z 272 → 222.
    • 100 fg OFN yields S/N ≥ 1 500:1 for the transition m/z 272 → 222.
  • Full Scan Mode:
    • 1 pg OFN gives S/N ratio ≥ 300 - 1,500:1 (RMS noise)
• Ion Source Temperature:
  • 100 °C to 350 °C
• Transfer Line Temperature:
  • Up to 350 °C

GC

• Oven Temperature:
  • Temperature range: Ambient +4 °C to 450 °C
  • Maximum ramp rate: 120 °C/min
  • Temperature programming: 20 ramps and multiple hold segments
• Inlets:
  • Split/Splitless (S/SL) inlet, with precise EPC control of split ratio (up to 2,000:1)

Laboratory requirements

• Power Requirements:
  • 120 or 240 V AC, 50/60 Hz, typically less than 2,000 W total consumption
• Instrument Dimensions:
  • GC Module: 55 cm (W) × 50 cm (D) × 50 cm (H)
  • MS Module: 45 cm (W) × 75 cm (D) × 45 cm (H)
• Weight:
  • Approx. 130 kg (combined GC and MS system)

Key Advantages:

• Unmatched Sensitivity: Achieves high sensitivity for low-level detection.
• High Productivity: Rapid scan speeds and high throughput for efficient analysis.
• Reliability: Consistent and reproducible results with minimal maintenance.
• Ease of Use: User-friendly interface and software for seamless operation.
• Versatility: Suitable for a wide range of applications from routine analysis to advanced research.

Why Choose Refurbished?

Purchasing a refurbished items from LabRulez provides exceptional value without compromising on quality. Our refurbishment process includes:

• Thorough Inspection and Testing: Each unit undergoes rigorous testing to ensure it meets original performance specifications.
• Updated Components: All critically worn or malfunctioning components and materials are replaced with new ones to extend the life and reliability of the modules after installation and to meet all manufacturer's performance requirements.
• Cost Efficiency: Save up to 70% of the cost compared to buying a new module or part, freeing up budget for other important lab expenses.

Why Buy from LabRulez?

LabRulez is committed to providing high-quality, reliable laboratory equipment at competitive prices. With our extensive experience in refurbishing and reselling scientific instruments, we guarantee:

• Expert Support: Our fully trained and experienced team of specialists is available to assist with installation, operation, and troubleshooting.
• Flexible Payment Options: Choose from a range of payment methods that suit your procurement process.
• Fast and Secure Shipping: Get your equipment delivered quickly and safely to your lab.