<p><strong>In the week from August 7, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.</strong></p>
<blockquote>
<h4><a href="https://gcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4>
</blockquote>
<blockquote>
<p><strong>👉 Search and filter</strong>  in more than <strong>2 500 GC, LC and MS webinars</strong>.</p>
</blockquote>
<h5><strong>1. Waters Corporation: Empower Tips: Ask Me Anything About Calculating Signal to Noise Ratio</strong></h5>
<ul>
<li>Tu, 8.8.2023, 16:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2892">Registration</a></li>
</ul>
<p>The calculation of signal to noise ratio is a critical parameter during method development, method validation and routine monitoring the performance of a chromatographic method.</p>
<h5><strong>2. Wasson-ECE Instrumentation: GC Detectors I: PDHID and SCD</strong></h5>
<ul>
<li>Tu, 8.8.2023, 21:30 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2688">Registration</a></li>
</ul>
<p>GC Detectors I: PDHID and SCD</p>
<h5><strong>3. GERSTEL/LCTech: Introducing an Automated Solution to Enhance Efficiency and Streamline the Entire Dioxin Workflow</strong></h5>
<ul>
<li>Th, 10.8.2023, 08:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2884">Registration</a></li>
</ul>
<p>LCTech&#39;s specialized equipment designed to optimize each step of the dioxin workflow, ensuring efficient processing, high-quality data, and safety.</p>
<h5><strong>4. Waters Corporation: USP &lt;1220&gt; and ICH Q14/Q2(R2) using Empower / Part I - Development</strong></h5>
<ul>
<li>Th, 10.8.2023, 10:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2900">Registration</a></li>
</ul>
<p>Development through the integration with selected QbD software that enables the required DoE approach.</p>


Webinars LabRulezGCMS Week 32/2023

<p><strong>In the week from August 14, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.</strong></p>
<blockquote>
<h4><a href="https://gcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4>
</blockquote>
<blockquote>
<p><strong>👉 Search and filter</strong>  in more than <strong>2 500 GC, LC and MS webinars</strong>.</p>
</blockquote>
<h5><strong>1. Wasson-ECE Instrumentation: GC Autosamplers for Gas and LPG Samples</strong></h5>
<ul>
<li>Tu, 15.8.2023, 21:30 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2689">Registration</a></li>
</ul>
<p>GC Autosamplers for Gas and LPG Samples</p>
<h5><strong>2. Thermo Fisher Scientific: Learn the secrets of Chromeleon CDS: Expert advice and tips</strong></h5>
<ul>
<li>We, 16.8.2023, 20:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2932">Registration</a></li>
</ul>
<p>Fundamentals of Chromeleon CDS. How to create custom reports. New features in Chromeleon 7.3.2 CDS. Benefits of upgrading from workstation to enterprise with the Ardia Platf</p>
<h5><strong>3. Agilent Technologies: Detecting Microplastics in Cannabis: An Analysis Using LDIR Spectroscopy</strong></h5>
<ul>
<li>Th, 17.8.2023, 20:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2772">Registration</a></li>
</ul>
<p>Detecting Microplastics in Cannabis: An Analysis Using LDIR Spectroscopy.</p>


Webinars LabRulezGCMS Week 33/2023

<p><strong>In the week from August 21, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.</strong></p>
<blockquote>
<h4><a href="https://gcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4>
</blockquote>
<blockquote>
<p><strong>👉 Search and filter</strong>  in more than <strong>2 500 GC, LC and MS webinars</strong>.</p>
</blockquote>
<h5><strong>1. C&amp;EN/Metrohm: Exploring Methods for Antioxidants, Oil &amp; Condition Monitoring in Tribology</strong></h5>
<ul>
<li>Tu, 22.8.2023, 19:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2917">Registration</a></li>
</ul>
<p>Vital aspects of oil and condition monitoring and the importance of antioxidants in tribology.</p>
<h5><strong>2. Wasson-ECE Instrumentation: GC Detectors II: The Strengths of Mass Spectrometry</strong></h5>
<ul>
<li>Tu, 22.8.2023, 21:30 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2690">Registration</a></li>
</ul>
<p>GC Detectors II: The Strengths of Mass Spectrometry</p>
<h5><strong>3. Thermo Fisher Scientific: Data integrity, compliance and IT efficiency made easy</strong></h5>
<ul>
<li>We, 23.8.2023, 20:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2933">Registration</a></li>
</ul>
<p>Learn how Chromeleon CDS can simplify audit trail reviews. Understand the seamless scalability from workstation to enterprise...</p>


Webinars LabRulezGCMS Week 34/2023

<p><strong>Heck is internationally recognized as one of the absolute pioneers in the use of mass spectrometry for large-scale protein research (proteomics). He has mentored many students and postdocs, several of them from the Czech Republic.</strong></p>
<h5><strong>You are a perfect example of a modern scientist, excelling in both research and science communication. How did you get started? What was your motivation to share your work with a broader audience?</strong></h5>
<p>My motivation for sharing science comes from being genuinely enthusiastic about my field of research, which can be quite specialised and complex. However, I believe it&#39;s crucial to share this enthusiasm not only with fellow scientists but also with the broader community, including neighbors, younger people and even children. As a scientist studying proteins, I find them fascinating, considering they are prevalent in our bodies and the entire world. My aim is to make more people appreciate the world of proteins by understanding them better.</p>
<p>Regarding my proficiency in science communication, I&#39;m not sure if I am really good. Initially, I found it challenging to effectively convey complex ideas to a broad audience. However, I&#39;ve learned that collaborating with individuals who are genuinely interested in science and experts in other fields like communication or art, can be incredibly helpful. They can play a crucial role in helping translate my scientific messages into presentations, videos, or social media posts. Working together, we bridge the gap between specialised knowledge and public understanding, making science more accessible and engaging for everyone. That&#39;s my motivation and approach to science communication.</p>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Forum_Bas_van_Breukelen_Bridging_the_world_of_science_and_everyday_life_f241fc64fc/Forum-Bas-van-Breukelen-Bridging-the-world-of-science-and-everyday-life.jpg" alt="Forum/Bas van Breukelen: Bridging the world of science and everyday life"/></p>
<h5><strong>I really like the way you connect science and art. That you together with artists try to communicate your research in an innovative way, for example using dance. How did that start?</strong></h5>
<p>I generally think that science and art are not so different and both try to make or see something that&#39;s really beautiful. In our case, if you see how a living cell works, it&#39;s really beautiful. It is as beautiful as seeing a painting of Rembrandt. However, when you look at the painting of Rembrandt or when you look at the cell, it&#39;s not only about looking at it, it&#39;s also about interpreting. Both science and art tell stories behind what we see.</p>
<p>If you connect with artists who are on that same wavelength as you then it works. In making these dance movies, I was lucky to get connected with a team of young video artists who were really interested in science. And I just told them a story about what I study and what I really like, and then I gave them almost full freedom to make an interpretation. And they came up with ideas, we came up with ideas and then together we made something which is neither just art nor just a scientific publication, but it&#39;s something in between.</p>
<p>I quite like the fact that many more people saw that movie than have read my papers and I also feel that quite a few more people took something from that movie. Because I&#39;m not sure if the general public takes a lot from our papers. So I see it as a fun thing to do, which also provides added value making science more accessible.</p>
<h5><strong>Is it challenging to find the right balance between scientific accuracy and art?</strong></h5>
<p>It is and it isn&#39;t. The simple answer is yes, it&#39;s difficult. But if you start to think longer about it, you know, we scientists, when we have written a paper or report, we think this is the ground truth and that it will be valid for the next 50 years or so. And then next year, someone else makes a new measurement or a new discovery and comes up with a new interpretation. Even science itself is fact-based understanding. When you move into a more arty presentation of your science, you have to compromise because proteins are not visible by eye and so on. You need to make cartoons that show how they might look, which is close to reality, but not the real reality. So you have to make compromises. But if that means that more people get an idea and an understanding of what you want to say, then I think it&#39;s not so difficult to make these compromises.</p>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Forum_Bas_van_Breukelen_Heck_s_lab_2ea8cc4c34/Forum-Bas-van-Breukelen-Heck's-lab.jpeg" alt="Forum/Bas van Breukelen: Heck&#39;s lab"/></p>
<h5><strong>Do you think that every scientist should communicate their research to the general public?</strong></h5>
<p>No, I think the science community should, but every person is different and you should not force every scientist to do science communication. But I think you should value when you have at your institute or in your group people who want to do it. And I think it&#39;s also extremely good to collaborate with people who are bridging the world of science and everyday life, who help scientists express their results to the general public in the most effective and engaging way. Some scientists are not good at science communication themselves but even their messages should be communicated. </p>
<h5><strong>You are also very active on <a href="https://twitter.com/hecklab">Twitter</a>. What&#39;s your motivation? Do you know how much time you spend on Twitter?</strong></h5>
<p>I think my motivation is not so different from many people that are on Twitter. Of course, it costs a bit of time. But I see many benefits. Sometimes I pick up things from Twitter that make me start to read the paper that I otherwise would not have read, or I hear about developments that I otherwise would not have heard about. And it&#39;s sort of broadening your network. However, you should also realise there is a bias. You don&#39;t reach everyone and not everyone reaches you, but it&#39;s just a fun way to keep connected with other scientists and maybe also with beyond science. </p>
<h5><strong>I know you really value diversity. Your team consists of many nationalities and types of expertise. Is this multidisciplinary approach the key to success?</strong></h5>
<p>The simple answer is yes. My group currently consists of 19 nationalities, several religions and gender classes. It is not the only or mandatory way, but I think for my group and for my science it really helps to have people from different backgrounds from different cultures, scientific expertise or social skills. They get along very well.</p>
<p>And I think when people leave the group, they have learned something in science, but they have also learned lessons in life. And maybe that&#39;s even better - a Chinese person learns from an American person and vice-versa or a chemist learns from a biologist and vice versa. This is very inspiring and enriching.</p>
<p>If you stay the whole life in the village where you were born and you only see that, you think that&#39;s normal. And I have learned that in the world, everyone thinks that their life is normal. But there are many different normals in the world and everything has its good and bad things. And I must say from my own experience that I have learned most about my own country while traveling abroad. Because you start to learn how your own country looks from the perspective of other countries and other cultures.</p>
<h5><strong>How important is networking for scientists and how do you build your own network? Do you have any tips or recommendations?</strong></h5>
<p>A good network is crucial. What I&#39;ve learned over the years is that the personal click is very important and you might have a scientist that may be the perfect fit in expertise, but if you don&#39;t like each other, then it&#39;s difficult. As a scientist, you may click with people all over the world. It doesn&#39;t need to be someone in your department. Science is a global thing, and that&#39;s the good thing about it.</p>
<p>What I really like about mass spectrometry is that we sometimes can help other scientists and of course, it makes you happy, but the real benefit for me is free education. Because if I talk to a neuroscientist, I will learn about neurology, if I talk to a physical chemist, I will hear about physical chemistry and so on. When you give something, you always get something back and I think this helps your own development and enriches your research. So I would recommend escaping our own ivory tower and start networking.</p>
<h5><strong>Many Czechs have worked in your group. Do you also collaborate with any Czech groups?</strong></h5>
<p>Yes, there were many Czech students or postdocs. And it is bad to generalize but I must say that all of them were smart and hardworking. In the last five years, I have been coordinating an European large-scale proteomic program. In this program we try to involve people from many countries, so there are also several Czech groups involved. The program is really nice because we get money to let people move from one lab to another and share information and knowledge. So it doesn&#39;t mean that we see each other every day, but we certainly have these connections.</p>
<blockquote>
<h5><strong>The trio of Czechs in Heck&#39;s lab</strong></h5>
</blockquote>
<blockquote>
<ul>
<li><strong>Jan Fiala</strong> (left) is a postdoc working on the development and application of mass spectrometry techniques for the study of archaeal organisms living in extreme environments such as hydrothermal vents or the Dead Sea. He received his PhD from the Faculty of Science of Charles University under the supervision of Petr Novák in 2021.</li>
</ul>
</blockquote>
<blockquote>
<ul>
<li><strong>Marta Siborová</strong> is a second-year postdoc in Heck&#39;s team. She uses cryo-electron microscopy to map interactions between human viruses and antibodies. She studied at Masaryk University in Brno. Her PhD thesis supervisor was structural virologist Pavel Plevka, who is currently also the director of CEITEC.</li>
</ul>
</blockquote>
<blockquote>
<ul>
<li><strong>Tereza Kadavá</strong> completed her Master&#39;s studies at the Faculty of Science of Charles University under a supervision of Petr Novák last year. As a PhD student in Heck&#39;s lab, she uses mass spectrometry-based techniques to study blood serum glycoproteins.</li>
</ul>
</blockquote>
<blockquote>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Forum_Bas_van_Breukelen_The_trio_of_Czechs_in_Heck_s_lab_bef263276d/Forum-Bas-van-Breukelen-The-trio-of-Czechs-in-Heck's-lab.jpeg" alt="Forum/Bas van Breukelen: The trio of Czechs in Heck&#39;s lab"/></p>
</blockquote>
<h5><strong>I read a few interviews with you and in one of them you mentioned that you are proud of watching young people come into your group, get trained, grow and mature. Do you know the statistics? How many scientists have you trained?</strong></h5>
<p>It depends. It always has to be nuanced, because who did I train? But just to give you a few numbers, in the 25 years that I&#39;ve been here, my lab has had over 100 PhD students graduating, about 75 postdocs and of course a lot of master students. We still have a network of alumni and about every five years we try to get everyone back. But they are all over the world now, some of them have remained in academia and are professors now, which I&#39;m proud of, but I&#39;m equally proud of alumni who work in industry or went into teaching.</p>
<p>When people ask me how I manage this group, I typically say I don&#39;t. And that it&#39;s the group that manages itself. Sometimes you can give a little shift here and a little direction there, but you have to get an atmosphere where people get trained by their buddy next to them and are in turn training other people. So the training is not something I can really put on my personal record, but I&#39;m proud of my group.</p>
<h5><strong>I also liked the fact that your next big question is what we can answer with mass spectrometry. Could you be more specific? What&#39;s your current next question?</strong></h5>
<p>My research has focused on mass spectrometry and you might say &#39;Hey, that&#39;s boring&#39; because that technology has already been around for more than 125 years. But I love it because every five years new things arise that maybe none of us who are the experts in the field had expected, which shows how dynamically and quickly this field is still moving. Things that we never thought that would happen are reality now. That we can study single cells with mass spectrometry, the proteome, the metabolome. For me, as a technology nerd, that&#39;s just amazing.</p>
<p>When I started my career, or even 10 years ago, I would have laughed if you had proposed that. I&#39;ve learned not to care about what is or isn&#39;t currently possible. And that&#39;s my message also to scientists: don&#39;t care. Just have visions of what you want to do and maybe one day it will be possible, and ideally you will have contributed to making this possible.</p>
<h5><strong>Do you have any other recommendations for young scientists?</strong></h5>
<p>If you&#39;re young, you should consider yourself &#39;a sponge&#39; and you should absorb, absorb, and absorb. Keep a broad perspective, learn about different disciplines. And maybe 20 years later you will really appreciate this knowledge. When you get older your sponge effect becomes weaker and you get stuck in what you were taught or what you believe. And I think staying young is maybe also about remaining such a sponge and being able to absorb things that are out of your comfort zone. So my recommendation is to remain a sponge.</p>
<p><img src="https://storage.googleapis.com/labrulez-bucket-strapi-h3hsga3/Forum_Bas_van_Breukelen_Albert_Heck_from_Utrecht_University_fd0aed31dc/Forum-Bas-van-Breukelen-Albert-Heck-from-Utrecht-University.jpg" alt="Forum/Bas van Breukelen: Albert Heck from Utrecht University"/></p>
<h5><strong>What does your typical work day look like? Do you have any rituals, such as starting the day by reading the newspaper?</strong></h5>
<p>No, I think it&#39;s a bit boring to tell you the truth. My day starts by checking emails and that takes a lot of time. But I don&#39;t see it only as a burden, of course, since half of the emails are also your network and your information.</p>
<p>If I ask my children, they always say, oh, the only thing he does is drink coffee and talk to other people, which is sort of true. And there is never a typical day because every day is different. But what I find most fun is interacting with the students. But I also like to keep up my network with international scientists, and also with people in industry. So especially at this stage of my career my daily work really is keeping the network going, keeping the infrastructure going. From time to time, I have a sabbatical day where I think about where I want to go with the science of the group, and these are the most joyful moments. But as a leader of a group, there are many other duties to deal with, such as people in your lab having personal issues or problems finding housing or getting a visa, getting recommendations, nor should you underestimate teaching, that&#39;s also quite a bit of your time and it&#39;s important. As a scientist, I find it fun, but you have a lot of different tasks, so I think there&#39;s almost no typical day, and it&#39;s certainly not a routine.</p>
<h5><strong>You&#39;re a very passionate scientist, but if you were not a scientist, what would you be?</strong></h5>
<p>That&#39;s an interesting question. I like nature and I like to run and cycle and I especially like to travel, discovering new places and what people from other nations think but also to learn about myself and my own country. So if I had a free choice, I would be a traveler, I think.</p>
<blockquote>
<h4><strong>Professor Albert Heck</strong></h4>
</blockquote>
<blockquote>
<p>Albert Heck is a Distinguished Faculty Professor at the Science Faculty of Utrecht University, the Netherlands, and Scientific Director of the Netherlands Proteomics Centre. He studied chemistry at the Vrije Universiteit in Amsterdam and received his PhD in 1993 from the University of Amsterdam. After postdoc positions at Stanford University (US) and the University of Warwick (UK), he was appointed professor at Utrecht University at the age of 33. His group develops and implements innovative mass spectrometric methods for more efficient and detailed characterization of proteins in relation to their biological function, spanning the fields of proteomics, glycoproteomics and structural biology. He has received numerous awards, including the prestigious Spinoza Award of the Netherlands Organization for Scientific Research. He also received the Sir Hans Krebs Medal during the FEBS conference held in Prague in 2018.</p>
</blockquote>


Bridging the world of science and everyday life

<p><strong>In the week from September 4, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.</strong></p>
<blockquote>
<h4><a href="https://gcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4>
</blockquote>
<blockquote>
<p><strong>👉 Search and filter</strong>  in more than <strong>2 500 GC, LC and MS webinars</strong>.</p>
</blockquote>
<h5><strong>1. Phenomenex: Sample Prep for Crude Extraction Removal &amp; SPE Method and Development</strong></h5>
<ul>
<li>Tu, 5.9.2023, 19:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2968">Registration</a></li>
</ul>
<p>Learn different sample preparation techniques, including solid support liquid extraction, Quechers and SPE.</p>
<h5><strong>2. Wasson-ECE Instrumentation: Training Program for GC Operators</strong></h5>
<ul>
<li>Tu, 5.9.2023, 21:30 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2692">Registration</a></li>
</ul>
<p>Training Program for GC Operators.</p>
<h5><strong>3. Agilent Technologies: Tackling India&#39;s Microplastics Menace: Impact and Solutions</strong></h5>
<ul>
<li>We, 6.9.2023, 07:30 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2977">Registration</a></li>
</ul>
<p>Microplastics and their Impact on Environment and Human Health.</p>
<h5><strong>4. Thermo Fisher Scientific: Ask-the-expert on the analysis of microplastics with pyrolysis GC-MS</strong></h5>
<ul>
<li>We, 6.9.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2929">Registration</a></li>
</ul>
<p>Questions on pyrolysis, from plastic samples, to micro and nano plastic, from qualitative results to quantitative results.</p>
<h5><strong>5. Thermo Fisher Scientific: Reducing costs for environmental companies through advances in automation</strong></h5>
<ul>
<li>Th, 7.9.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2942">Registration</a></li>
</ul>
<p>Automated workflow to reduce solvent usage and costs, increase sample throughput, and improve data quality.</p>
<h5><strong>6. Waters Corporation: Change the Game Part I - POPs Analysis with Atmospheric Pressure GC (APGC)</strong></h5>
<ul>
<li>Th, 7.9.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2583">Registration</a></li>
</ul>
<p>Join our webinar to find out how APGC could improve your methods with: Sensitivity, Selectivity, Robustness.</p>


Webinars LabRulezGCMS Week 36/2023

<p><strong>In the week from September 18, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.</strong></p>
<blockquote>
<h4><a href="https://gcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4>
</blockquote>
<blockquote>
<p><strong>👉 Search and filter</strong>  in more than <strong>2 500 GC, LC and MS webinars</strong>.</p>
</blockquote>
<h5><strong>1. Agilent Technologies: Raw Material ID and Raman</strong></h5>
<ul>
<li>We, 20.9.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2881">Registration</a></li>
</ul>
<p>Challenges with respect to material identification process and its qualification.</p>
<h5><strong>2. SelectScience/Agilent Technologies: From Paper to Pixels: Success stories of laboratories embracing digitalization</strong></h5>
<ul>
<li>We, 20.9.2023, 17:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2988">Registration</a></li>
</ul>
<p>Success stories of how they navigated the journey to lab digitalization, from strategy and planning to implementation and optimization.</p>
<h5><strong>3. Agilent Technologies: Measuring and Analyzing Optical Coatings by UV-Vis-NIR</strong></h5>
<ul>
<li>We, 22.9.2023, 19:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2927">Registration</a></li>
</ul>
<p>Techniques for determining film thickness, index of refraction, etc. through the use of a Cary 7000 UV-Vis-NIR system.</p>


Webinars LabRulezGCMS Week 38/2023

<p><strong>In the week from October 2, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.</strong></p>
<blockquote>
<h4><a href="https://gcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4>
</blockquote>
<blockquote>
<p><strong>👉 Search and filter</strong>  in more than <strong>2 500 GC, LC and MS webinars</strong>.</p>
</blockquote>
<h5><strong>1. Thermo Fisher Scientific: Compound Discoverer software workshops (Specialized data processing: Met ID)</strong></h5>
<ul>
<li>We, 4.10.2023, 10:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2937">Registration</a></li>
</ul>
<p>The workshops are designed to bring beginners up-to-speed with best practices as well as allow advanced users to interact with software experts and enquire how to get the most out of their data.</p>
<h5><strong>2. Agilent Technologies: Practical Advice on GC Column Selection</strong></h5>
<ul>
<li>We, 4.10.2023, 12:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3051">Registration</a></li>
</ul>
<p>Various aspects of GC column selection.</p>
<h5><strong>3. Agilent Technologies: Agilent Microplastics Virtual Symposium 2023</strong></h5>
<ul>
<li>Th, 5.10.2023, 09:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3049">Registration</a></li>
</ul>
<p>Explore various crucial topics related to the analysis of microplastics, covering areas such as sampling, sample preparation, analysis, and evaluation.</p>
<h5><strong>4. Agilent Technologies: Best Practices for GC Column Installation and Care</strong></h5>
<ul>
<li>Th, 5.10.2023, 12:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3052">Registration</a></li>
</ul>
<p>Understand a hassle-free GC column installation and how to take care of your GC column.</p>
<h5><strong>5. Agilent Technologies: Beyond SPME: Understanding SPME Arrow, Thin-Film SPME, and Twister</strong></h5>
<ul>
<li>Fr, 6.10.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3050">Registration</a></li>
</ul>
<p>Alternate approaches - SPME Arrow, Thin Film SPME (TF-SPME) and Twister.</p>
<h5><strong>6. Agilent Technologies: The Chromatography Detective: GC Troubleshooting Tips</strong></h5>
<ul>
<li>Fr, 6.10.2023, 12:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3053">Registration</a></li>
</ul>
<p>The most common chromatographic issues that you experience with Gas Chromatography and take a logical approach to finding the root cause and correcting the problem.</p>


Webinars LabRulezGCMS Week 40/2023

<p><strong>Wiley released a KnowItAll version with many new powerful electron ionization gas chromatography-mass spectrometry (EI GC-MS) capabilities.  I have developed FREE training videos and associated handouts covering basic and advanced MS topics that will be helpful to the new user.</strong></p>
<p>Also, a <a href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Published_Know_It_Al_Start_QRG_2_7114366b93/Published-KnowItAl-Start-QRG-(2).pdf"><strong>Quick Reference Guide</strong></a>. is available.</p>
<p><strong>KnowItAll is a vendor neutral data processing solution for spectral analyses</strong> which will be very valuable in <strong>unknown identifications</strong>.</p>
<p>It processes <strong>IR</strong>, <strong>Raman</strong>, <strong>MS</strong>, <strong>NMR</strong>, and <strong>UV data</strong> employing a large number of <strong>file formats (&gt;170)</strong> and a total of <strong>2.5 million reference spectra</strong>.</p>
<ul>
<li><strong>~264K IR</strong></li>
<li><strong>~25K Raman</strong></li>
<li><strong>~1.25M EI mass spec</strong></li>
<li><strong>~894K NMR</strong></li>
<li><strong>~30K UV</strong></li>
</ul>
<h3><strong>Highlights:</strong></h3>
<ul>
<li><strong>Deconvolution</strong>/<strong>very fast library searching</strong> of accurate/nominal mass GC-MS data</li>
<li><strong>Easy manual processing</strong> of nominal and accurate mass GC-MS data</li>
<li>Fast EI searches of <strong>&gt;1.2 million spectra in &lt;0.5 seconds</strong></li>
<li>Amazing <strong>adaptive search for unknown ID</strong> by extending usefulness of all libraries</li>
<li><strong>Transfer structures and spectra</strong> between NIST search and KnowItAll</li>
<li>Easy <strong>structure drawing</strong> and <strong>structure searches</strong></li>
<li><strong>Conversion of NIST user libraries</strong> to Wiley format</li>
<li><strong>Easy creation of libraries</strong> using links to MS interpreter and PubChem</li>
</ul>
<h2><strong>In the second part we will look at:</strong></h2>
<p>Detailed Handouts including tables of content are available in the <a href="https://gcms.labrulez.com/labrulez-bucket-strapi-h3hsga3/identity_search_52252ae23c/identity-search.pdf"><strong>LabRulezGCMS library</strong></a>.</p>
<ul>
<li><strong>Sending a Search</strong> from ProcessIt to SearchIt</li>
<li>Setup of <strong>Search Functions</strong></li>
<li>Go Back to Top Window and Setup Other <strong>Search Parameters</strong></li>
<li><strong>Results</strong> Displayed In MineIt</li>
<li><strong>Implicit Hydrogens</strong></li>
<li>The <strong>Search Results</strong> in MineIt are Stored in Separate Tabs at Bottom of Page for Later Review</li>
<li>To Return to Either <strong>SearchIt</strong> or <strong>ProcessIt</strong></li>
</ul>
<h3><strong>Future parts will focus on:</strong></h3>
<ul>
<li>Part 1. <a href="https://gcms.labrulez.com/article/2974"><strong>KnowIt All Introduction</strong></a></li>
<li>Part 2. <a href="https://gcms.labrulez.com/article/3059"><strong>ProcessIt for Manual Processing of EI GC-MS Data</strong></a></li>
<li>Part 4. SearchIt/MineIt;  Novel New Adaptive Library Search</li>
<li>Part 5. SearchIt/MineIt:  Unresolved Peak Analyses and Library Search</li>
<li>Part 6. MS Expert:  Deconvolution of Mixtures with Library Search</li>
<li>Part 7. Interchange of Spectra Between KnowItAll and NIST Search</li>
<li>Part 8. Tips for Drawing Structures and Structure Searches in ChemWindow</li>
<li>Part 9. Structure Interchange Between KnowItAll and NIST plus MS Interpreter</li>
<li>Part 10. Converting NIST Libraries to Wiley Format</li>
<li>Part 11. Making a User Library Using NIST MS Interpreter and PubChem</li>
<li>Part 12. Real World Example with IR and MS Combined searches</li>
</ul>


Wiley KnowItAll Mass Spec Training - Part 3: Identity Search of GC-MS Data with SearchIt/MineIT

<p><strong>In the week from October 9, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.</strong></p>
<blockquote>
<h4><a href="https://gcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4>
</blockquote>
<blockquote>
<p><strong>👉 Search and filter</strong>  in more than <strong>2 500 GC, LC and MS webinars</strong>.</p>
</blockquote>
<h5><strong>1. LECO: Unlock the Power of GC×GC-TOFMS/FID – MOSH/MOAH</strong></h5>
<ul>
<li>Tu, 10.10.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3067">Registration</a></li>
</ul>
<p>Exciting advancements in analytical technology that are revolutionizing the way we identify and characterize these crucial components.</p>
<h5><strong>2. Restek Corporation: ITA-SPA live | The Art and Science of next generation GC Capillary Column Production</strong></h5>
<ul>
<li>Tu, 10.10.2023, 14:30 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3066">Registration</a></li>
</ul>
<p>Choice of tubing, stationary phase chemistries and deactivation chemistries will be discussed and how to reach maximum practical column life time.</p>
<h5><strong>3. GERSTEL: Dynamic Focusing: A New Technique for Focusing VVOCs and Managing Water in Automated Ambient Air Analysis</strong></h5>
<ul>
<li>We, 11.10.2023, 09:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3074">Registration</a></li>
</ul>
<p>The theory and mechanism of Dynamic Focusing for VVOCs analysis in Automated Ambient Air Analysis.</p>
<h5><strong>4. Agilent Technologies: 2023 GC/Q-TOF Virtual User Meeting</strong></h5>
<ul>
<li>We, 11.10.2023, 09:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2978">Registration</a></li>
</ul>
<p>Q&amp;A about low-cost, robust, and easy-to-maintain GC/Q-TOF instruments from Agilent.</p>


Webinars LabRulezGCMS Week 41/2023

<p><strong>In the week from October 16, the following webinars await you in the field of gas / solid phase and especially Raman, FTIR, GC and GC/MS.</strong></p>
<blockquote>
<h4><a href="https://gcms.labrulez.com/webinars"><strong>👉 DETAILS AND REGISTRATION IN THE WEBINARS SECTION</strong></a></h4>
</blockquote>
<blockquote>
<p><strong>👉 Search and filter</strong>  in more than <strong>2 500 GC, LC and MS webinars</strong>.</p>
</blockquote>
<h5><strong>1. Waters Corporation: Empower Tips: Ask Me Anything About Configuring Empower Software to Maximize Your Compliance</strong></h5>
<ul>
<li>Tu, 17.10.2023, 16:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3082">Registration</a></li>
</ul>
<p>Current system policies and privileges in Empower Software that affect what analysts can and cannot do when processing data, particularly in Review.</p>
<h5><strong>2. SelectScience/GERSTEL/Agilent Technologies: GC-MS solutions for sensory analysis in non-alcoholic beers</strong></h5>
<ul>
<li>Tu, 17.10.2023, 19:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3059">Registration</a></li>
</ul>
<p>Semi-targeted method developed using DHS-GC-MS technology that allows for the improvement of NA beer flavor through the addition of specialized hops products.</p>
<h5><strong>3. Thermo Fisher Scientific: Compound Discoverer software workshops (Specialized data processing: GCMS)</strong></h5>
<ul>
<li>We, 18.10.2023, 10:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2938">Registration</a></li>
</ul>
<p>The workshops are designed to bring beginners up-to-speed with best practices as well as allow advanced users to interact with software experts and enquire how to get the most out of their data.</p>
<h5><strong>4. Separation Science/Thermo Fisher Scientific: Elevate your lab: How to manage a successful LIMS implementation</strong></h5>
<ul>
<li>We, 18.10.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3088">Registration</a></li>
</ul>
<p>How to achieve a successful laboratory software installation.</p>
<h5><strong>5. Agilent Technologies: The Encounter: Ethylene Oxide Analysis</strong></h5>
<ul>
<li>We, 18.10.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2878">Registration</a></li>
</ul>
<p>End-to-end workflow solution to meet your Ethylene Oxide testing requirements so that the samples pass the export regulatory mandate.</p>
<h5><strong>6. Agilent Technologies: Techniques for Avoiding Unexpected Problems in LC and GC Analysis</strong></h5>
<ul>
<li>We, 18.10.2023, 17:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2556">Registration</a></li>
</ul>
<p>We will cover topics including peak shape, ghost peaks, tailing peaks, split peaks, missing peaks, variable retention times, high backpressure, instrument contamination, and ion suppression.</p>
<h5><strong>7. Thermo Fisher Scientific: Is it time to consider an alternative GC carrier gas?</strong></h5>
<ul>
<li>Th, 19.10.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3090">Registration</a></li>
</ul>
<p>How your helium consumption can be significantly reduced if moving to hydrogen is just not an option.</p>
<h5><strong>8. Separation Science/Markes International: Latest advances in GC/MS air analysis workflows: from PFAS to utilizing hydrogen carrier gas</strong></h5>
<ul>
<li>Th, 19.10.2023, 11:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/3026">Registration</a></li>
</ul>
<p>How Markes’ thermal desorption (TD) equipment coupled to Agilent’s GC-MS systems can be used for PFAS analysis from air and materials.</p>
<h5><strong>9. Agilent Technologies: Identification of Raw Materials by a Handheld Instrument in Amber Glass, Paper Bags, and Other Challenging Containers</strong></h5>
<ul>
<li>Fr, 20.10.2023, 19:00 (CEST)</li>
<li><a href="https://gcms.labrulez.com/webinar/2928">Registration</a></li>
</ul>
<p>Innovative use of Spatially Offset Raman Spectroscopy (SORS) for Raw Material Verification.</p>


Webinars LabRulezGCMS Week 42/2023

Article

Product

Events

Webinars

Application

Academy

Video

Poster

Scientists

Plastics

Environment

Food

Water

Health

Presentation

Scientific article

Interview

Toxicology

Popularization

Science and research

Software

Covid-19

Career

Laboratories

Various

Zaměření

Type of News

Focus

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

Reportáže, rozhovory, zprávy o vědeckých projektech a studentských akcích ... Jsme online informační bránou Univerzity Karlovy.

Forum: magazín Univerzity Karlovy

My main interest is the identification of organic compounds by mass spectrometry in organic mixtures.

Webinars LabRulezGCMS Week 42/2023

Webinars LabRulezGCMS Week 41/2023

Wiley KnowItAll Mass Spec Training - Part 3: Identity Search of GC-MS Data with SearchIt/MineIT

Webinars LabRulezGCMS Week 40/2023

Webinars LabRulezGCMS Week 38/2023

Webinars LabRulezGCMS Week 36/2023

Bridging the world of science and everyday life

Webinars LabRulezGCMS Week 34/2023

Webinars LabRulezGCMS Week 33/2023

Webinars LabRulezGCMS Week 32/2023

Upcoming events

US HUPO 2026

Thermo Fisher Scientific at US HUPO 2026

Pittcon 2026

Webinars

Real-Time In-Line Insight for Therapeutic Protein Production

Microplastics in Wastewater: A Population Based Approach to Identifying Potential Sources

PFAS in Air: A Practical Toolkit for Real-world Applications